Database Develop

Hard bricked Mi 8

Hello,
I have hard bricked my Mi 8 doing that :
1. install TWRP 3.2.1 (successfull)
2. backup of original phone setup (everything was checked)
3. trying to flash xiaomi.eu MIUI 10 (latest realease)
4. booting (unsuccessfull, not bootloop but after MI android logo doesn't boot up)
5. so i decided to restore my backup (just data unchecked)
6. press reboot (and it didn't reboot)
The actual situation :
When i try to press the power button the phone doesn't boot, If i try to go into recovery mode it doesn't boot and same for fastboot mode.
The screen is unresponsive (no backlight) and it doesn't vibrate. When i connect the phone to my computer it is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) which correspond to the EDL mode (i think).
I tried :
1. miflash (using 2 different fastboot china dev rom found on the XDA recovery post for mi 8) --> the mi 8 is automatically recognized as Qualcomm HS-USB QDLoader 9008 (COM5) without using deepflash cable or pressing any button and I got an error : "ERROR: Only nop and sig tag can be recevied before authentication."
EDIT : I updated my Miflash tool and now i have to connect to my Mi account BUT i have to be EDL authorized by Xiaomi to flash repair my phone
2. deepflash cable (but it changes nothing)
3. mi flash pro : it open miflashtool
4. mi pc suite : nothing
I don't understand why it is bricked considering i just restored a working setup but it the most hard brick i have ever seen.
If someone can help me or suggest an option i'll give it a try and keep you updated.
EDIT : i understand now , it is due to the Anti-Rollback system that xiaomi implemented in their rom (we can't downgrade) + the necessity to have an EDL authorized account
Thanks you
PS : i can post MiFlash log if it can help

And with mi pcsuite?

pizer11 said:
And with mi pcsuite?
Click to expand...
Click to collapse
Didn't try it but i was thinking this software wasn't updated since 2015. I just see right now that the 3.2 beta is released and Mi 8 is supported.
Thanks for that, i'll give it a try tomorrow as i can't do this that night.
I'll keep you updated.

Did you format data, your backup... Was it global or chinese?

israelnobrega said:
Did you format data, your backup... Was it global or chinese?
Click to expand...
Click to collapse
My initial ROM was the vendor rom (Mi global store on aliexpress) and i think it is a fake "official global rom" on MIUI 9.5 so a modified chinese rom.
The xiaomi.eu ROM was the MIUI 10 8.7.26 for Mi 8.
Before every flash (or restoration) of ROM I format DATA, CACHE and DALVIK.
btw i didn't format data, cache and dalvik after the restoration. I just press the reboot option of TWRP and it never booted again.

Omg. I'm afraid. My mi8 came with global 9.5 china (in facto it's chinese version) and i've put MIUI 10 beta 8.7.12. In 1 week I'll be able to unlock it and put global rom (my language is portuguese). But after reading this, i'm not motivated. Sad. Hope you'll can fix It. Crossed fingers here!

israelnobrega said:
Omg. I'm afraid. My mi8 came with global 9.5 china (in facto it's chinese version) and i've put MIUI 10 beta 8.7.12. In 1 week I'll be able to unlock it and put global rom (my language is portuguese). But after reading this, i'm not motivated. Sad. Hope you'll can fix It. Crossed fingers here!
Click to expand...
Click to collapse
Yeah it is weird... that's the first time i see such a problem on an android (and Xiaomi device).
Actually you can flash TWRP (I suggest v3.2.1) without any problem but backup/restore didn't worked for me and flash xiaomi.eu didn't worked (but it didn't bricked my mi 8).
EDIT : I have some "news" but i'm not sure about that. I think there is something about the anti-rollback system : as i flashed MIUI 10 and restored back to MIUI 9.5 (downgrade) it activated the ARB system and hard bricked my phone (maybe).
I checked others forum and a guy named MyReghalia on en.miui.com forums have EXACTLY the same problem as me and he didn't figured it out with that problem.
BTW maybe with an EDL authorized account i'll be able to flash via Miflash but find someone who has an authorized EDL Mi account to borrow or EDL authorize my account is an other problem....

Did u flash the right recovery.img on the mi8?if so what partitions u restore?faulty recovery?....is weird i have never see ql9008 mode unless the recovery is broken and restore an partiton in the wrong slot

You need to try the EDL method

Here try this
http://en.miui.com/forum.php?mod=viewthread&tid=3459005&extra=page=1&mobile=2

altvolt74 said:
Did u flash the right recovery.img on the mi8?if so what partitions u restore?faulty recovery?....is weird i have never see ql9008 mode unless the recovery is broken and restore an partiton in the wrong slot
Click to expand...
Click to collapse
Yep, i flashed the v3.2.1 -0611- for Mi 8 availible on the XDA forums. It worked and i had access to the custom recovery.
When I backuped/restored I checked all the options availible and didn't touch anything about partitions. Maybe it is a faulty recovery but actually i have some clues because, IMO also it is weird that my device is automatically recognized as ql9008 mode. (BTW it seems to be a well known problem on redmi note 5/pro)
I checked on diverse forums and there is the ARB (Anti-RollBack system) that xiaomi put inside their rom and doesn't allow to downgrade android version or miui firmware unless a brick occurs. The only way I found to get back my phone is to contact xiaomi repair services and asked them to repair my phone because they have authorized EDL mi account (it is something pretty new, before we had acces to flash in EDL mode without account, now it is regulated by xiaomi....)
skanskan said:
You need to try the EDL method
Click to expand...
Click to collapse
I did try (it is the way i used in Miflash with fastboot rom availible in the same post than TWRP v3.2.1 -0611-) and i need an EDL authorized account to do that
altvolt74 said:
Here try this
http://en.miui.com/forum.php?mod=viewthread&tid=3459005&extra=page=1&mobile=2
Click to expand...
Click to collapse
Thanks you but actually i don't need to do the test point method because my phone is already and automatically in EDL emergency mode.
BTW it is the good way to do it but unfortunately i don't have any EDL auth account...
With everything i read on different forums i'm pretty sure that rom development will be extremely difficult until a way is found to get around this ARB system and EDL authorization account that doesn't allow to repair our bricked xiaomi phone.

Very bad they ask for an account even with emergency EDL repairs.

Hello, my mi8 I have it more than a month ago and came with the Chinese ROM, then update from the phone to MIUI 10 Chinese beta, then using Miflash to rom.eu MIUI 10 and then again through Miflash to the last global 9.5.14.0 and I have not had any problem PPR what I think At least in my case that Xiaomi has not activated the Antirollback in the Mi8, forgive my English, greetings
---------- Post added at 10:02 PM ---------- Previous post was at 09:56 PM ----------
Ahhh I forgot, before doing all that had unlocked the bottloader through Miunloock and the last ROM that had flashed the global I forgot to unmark that blocked the device and the phone was in Bootloop, so I went back to unlock the bootloader and Ripped smoothly

skanskan said:
You need to try the EDL method
Click to expand...
Click to collapse
There are only 2 ways to bring back to life the MI8 with brick
1.-Xiaomi Authorized Account (Miflash)
2.-Latest version of China stable in my case I need the 9.5.14.0 and there is only the 9.5.11.0 for Flash by Mipcsuite 3.0 China
(Mipcsuite 3.0 Chinese version allows flash with blocked bootloader)

davidmtzs87 said:
There are only 2 ways to bring back to life the MI8 with brick
1.-Xiaomi Authorized Account (Miflash)
2.-Latest version of China stable in my case I need the 9.5.14.0 and there is only the 9.5.11.0 for Flash by Mipcsuite 3.0 China
(Mipcsuite 3.0 Chinese version allows flash with blocked bootloader)
Click to expand...
Click to collapse
Mipcsuite does not allow flashing via EDL.

I have the same issue before and I got the solution form miuieu forum.
After installing miui 10 from miuieu, you need to format data. Then bring up to home screen successfully.

Hi ,
Actually the only way to get back a hard-bricked Mi8 ( no fastboot , no recovery) is through MiflashTool with an EDL authorized account , there isn't any way to do this because MiPcsuite doesn't recognize an hard bricked device.
By the way it seems that this problem is not well known on XDA forum I strongely invite you to speak about that on these forums (BE AWARE) and to take a look at xiaomi forum, where it seems a bigger problem than here (a LOT of people, from India , China and everywhere around the world are in the same boat...).
The problem begun with the note 5/pro (you will find more about that on this device's forums)
Also, i returned back my Mi8 because of the xiaomi's politics about the liberty to self repair (software) our phone and i get to oneplus which allows us to do whatever we want...
Good Luck and peace

Hello, my MI8 is Bricked and i need An EDL Auth. Can anyone help my? Sry for my bad English. :Weinen::Weinen:

skanskan said:
You need to try the EDL method
Click to expand...
Click to collapse
The problem is you need an authorization buy Xiaomi doesn't provide them anymore.
---------- Post added at 02:09 PM ---------- Previous post was at 02:03 PM ----------
How can we get the authorized account, please?

Did you find a solution?
raulmhe said:
Mipcsuite does not allow flashing via EDL.
Click to expand...
Click to collapse
I am facing the same problem. It's driving me crazy!

Please help me revive my dead K20 pro! :(

Hey guys, I’ve purchased a k20 pro 6/128 variant here in Trinidad and Tobago from Let’s Talk phone company which imports phones and sell it here in Trinidad and Tobago. No one else sells the device here in my country.
When I opened my phone and started using it, I saw that it was the fake global rom which was installed on it. So I came onto here to try to flash the china firmware on it, which I did. After flashing the firmware on it, i installed twrp and wiped everything, data + cache + Dalvik Cache + System, then I flashed the EU firmware on it. After successfully flashing it I flashed magisk and some modules on it, and the phone worked GREAT! Then one day while using it the phone just shut down just like that and never booted back up. It stayed on the boot screen and did nothing!
So I tried reflashing the Chinese firmware with miflash, but this time I Accidentally RELOCKED bootloader, but when I first purchased the phone, the bootloader was already UNLOCKED. Miflash successfully flashed the chinese firmware v10.3.8.0 and the phone booted. I was RELIEVED! But after using it for a while, the phone started freezing! And their was a problem with the front camera! Somehow my front camera won't open properly, it kept saying "Can't open front camera, please calibrate".
And when I press Calibrate, popup cam goes up and down 3 times in a row and says "Can't calibrate".
So I went and request to unlock the bootloader and waited 168 hours, and in that 168 hours I left the phone untouched because it kept crashing and never boot back up unless if I go into recovery and wipe data. So I left the phone untouched for a whole week! Yesterday the waiting period came to an end and FINALLY I unlocked the bootloader! When I opened back up miflash I ACCIDENTALLY LOCKED BOOTLOADER AGAIN!!!! :’( Now Mi unlock is saying that I need to wait 30 DAYS TO UNLOCK BOOTLOADER BEFORE I CAN TRY TO FIX MY PHONE AGAIN! Please help me. Is there any way to flash the firmware on a locked bootloader? i dont care which firmware it is, once my phone is working again.
Any assistance would be very much appreciated!

Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.

bouyhy01 said:
Only solution is to enter to edl mode by test point but its too risky or to get a mi account with edl authorization, wait till the end of 30 days and dont make the same error for 3 time.
Click to expand...
Click to collapse
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.

You have to unlock the bootloader and it will work again

ashok9949 said:
You have to unlock the bootloader and it will work again
Click to expand...
Click to collapse
guess i'll have to wait a whole month then before i can use the phone. Thanks anyway

1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem

carpediemz said:
1.Go to fastboot. try flash latest chineese fastbootrom.
doesnt work?
Then you only have choice for EDL mode flash.
But edl mode requires authentification anyway which in most case you do not own..
we need something solid edl flash method.. this is common&biggest xiaomi problem
Click to expand...
Click to collapse
Here are the list of things i've tried thus far:
1- Tried flashing china fastboot rom 10.3.8.0 with Miflash. No luck.
2- Tried unlocking bootloader with Mi unlock. Have to wait the 30 day period.
3- Tried unlocking bootloader with fastboot commands. Didn't work.
4- Tried flashing LR twrp and unofficial twrp, No luck as well.
I've sent an Email to [email protected] couple hours ago. Waiting to hear from them.
As for edl mode, i've no idea what it is or how to even start. If someone can guide me as to what to do, i'll try it. Appreciate all the feedback and help from y'all

abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.

demonntl said:
I dont know how you can flash indian rom with locked bootloader.
Now there is only one method for you, open the back cover of the fone, do test point method, flash china fastboot firmware and unlock again.
Click to expand...
Click to collapse
That might be an option for me; however, i dont know where is the test point after i open the back of the phone. Any idea?

abdulmaalik1tt said:
I forgot to mention, after using miflash the last time, i flashed the indian global firmware on it using Miflash. The phone wont boot up past the recovery mode. It says "This MIUI version can't be installed on this device" in red. Tried wiping data but same results.
Click to expand...
Click to collapse
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader

Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"

ashok9949 said:
EDL mode will not work untill you have a EDL Authorized account
I had already tried and it was a bad idea to open the back cover just stick with unlocking bootloader
EDL test point will not work because xaiomi made because no body should buy Chinese Varient phone and flash global rom ,and I don't understand exactly why xaiomi did this with EDL and bootloader
Click to expand...
Click to collapse
Wow. All this for nothing :crying:

abdulmaalik1tt said:
Opened up the back of my phone, found the edl mode test point, miflash recognizes the device and begins flashing then i get this error "cannot receive hello packet"
Click to expand...
Click to collapse
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.

IXTUS said:
Ok, when I flash my mi5, it is the same. You only need to reboot the device into edl and try to flash again.
Click to expand...
Click to collapse
Now it's saying my account is not authorized. The stress is real :crying:

hi i have some similar for mistake i relock bootloader and just boot in fastboot and dont boot up recovery and i wait too 30 days but i search google and just download older mi flash and whooalaaa bootloader unlocked again not waiting time just try that work for me

abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
i said to you,i had faced the same issue,only unlocking the bootloader will help you
or you can try chinese mi pc suite,with english translator but you have to flash chinese recovery rom,
but im not sure it will work ,in my case it didnt work because it had base rom of indian varient
actually chinese and indian k20 pro are not the same
for example indian k20 pro dont have NFC
but chinese varient have nfc

abdulmaalik1tt said:
Now it's saying my account is not authorized. The stress is real :crying:
Click to expand...
Click to collapse
Did you complete the flash ？and start the phone into miui? If there have some picture, it is best.
---------- Post added at 10:03 AM ---------- Previous post was at 09:42 AM ----------
I have some ideas but I have not verified them. You can try to replace the recovery.img in china firmware for twrp and then fastboot flash on edl mode。if it can be done， dnot star it just into twrp and formatted data.
I will test this method on my old mi5 a little later.

To fix the front camera problem you'll have to flash the persist.img file of the 10.3.8 into the persist partition. It worked for me several times.
I accidentaly lock my bootloader, too, but I was able to unlock it right away

Don't worry mate, I had the same issue.
See this thread:
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
I got mine fixed, you just need someone with an authorised account to help you out.
You got this far! You are almost there! trust me.

Thanks guys. I messaged the guy. Let's see if this works

MI 9 Bricked After trying to change CN rom to Global rom.

Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.

pedrohwelerson said:
Guys,
I just solve my problem, I used MI Unlock tool and unlock the bootloader and all is good again.
I would like to thank you all for your help.
Best Regards
Click to expand...
Click to collapse
Hi,
How did you unlock your bootloader?
It asks for binding Mi account and it's not possible when your phone is bricked.

Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.

nudou350 said:
Yeah, the rule is simple. If it boots into fastboot, it can be recovered. Just flash the global you want with the MI flash tool and the fastboot file.
Click to expand...
Click to collapse
I'll try it later my friend, I'll come back if I succeed.
Thank you

pedrohwelerson said:
I'll try it later my friend, I'll come back if I succeed.
Thank you
Click to expand...
Click to collapse
You use Mi flash 2018.5.28
and Flash rom dev Global 9.6.27
or rom Stable Global
https://forum.xda-developers.com/showpost.php?p=80319431&postcount=3

Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.

pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.

hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double check the system information before flashing or updating.
Click to expand...
Click to collapse
I think the problem is that he locked the bootloader after install the global ROM.
There are several user that flash global ROM in Xiaomi chinese market phones.
SDS

pedrohwelerson said:
Guys I am too stupid for this,
I flashed the fastboot global rom in my phone with MI flash but locked it in the end (can't believe I am that retard), now I believed I have bricked it for good.
Now I can't flash the correct fastboot ROM with miflash because I have locked the bootloader while trying to flash the Global ROM. I am at the fastboot loop again.
Can I do something now or I just have a expensive paper holder?
Thank you guys.
Click to expand...
Click to collapse
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.

Jhnn11 said:
Hi guy,
Same thing happened to me, I felt very stupid, but it was on a MI 8 SE.
According to my experience, only there's a way to solve it and it's booting on EDL mode.
You'll need an authorized Mi account to flash the original ROM.
There's a complete guide on c . mi . com named [Guide] [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More, I can't post the url because I'm a new user
Best wishes!
Regards from Peru.
Click to expand...
Click to collapse
How were you able to get the authorized MI account? In the tutorial you mentioned, they didn't say anything about MI Account.
I'll try MItool first and let you guys know.
Thank you for the tip

hochocnua said:
flash another official firmware on a locked bootloader BY XIAOMI TOOL V2 https://www.xiaomitool.com/v2
https://www.youtube.com/watch?v=UMkDAxiDdKs&t=10s
Here’s something VERY important before you flash or update the ROM.
1. Xiaomi Phones manufactured for Chinese market are not able to run MIUI Global ROM.
2. Xiaomi Phones manufactured for Global markets are not able to run MIUI China ROM.
We highly recommend you to buy Xiaomi Phones via official or authorized sales channels and double-check the system information before flashing or updating.
Click to expand...
Click to collapse
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way

pedrohwelerson said:
Do you think I'll be able to use the MI TOOL V2, even in the fastboot loop.?
Thank you by the way
Click to expand...
Click to collapse
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.

zipsu said:
It should work, try to get the chinese rom back, unlock it again, flash twrp, give xiaomi.eu rom a try, they should work on any xiaomi phone regardless of region.
Click to expand...
Click to collapse
I can't use MITOOL because the USB DEBUGGING isn't enabled, is there a way to do it in the fastboot loop?
Thank you

It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha

nudou350 said:
It should recongnize with no problems.. Just check if you have the ADB drivers and try unlocking the bootloader and then flashing the Rom with the miflash tool. Still, if you have access to fastboot, things should be fine! Don't panic hahha
Click to expand...
Click to collapse
The MI tool v2 recognized my phone alright but it can't flash the rom coz I don't have the usd debugger enable and I can't turn on the bug to enable it since I Bricked the phone.
So I wondering if I can turn the usb debugger by other way.
Thank you

pedrohwelerson said:
Hi Guys, I hope someone of you could help me out.
Recently a Chinese friend of mine gave me an MI 9 as a present. But unfortunately they ROM of the new phone was the CN version.
I found a way to change the ROM by doing the unlock bootloader and flashing TRWP, after that, I downloaded the MI9_Global_V9.5.30_vendor_fw_flash, went back to the Recovery and wiped the "Delvik, cache, SYSTEM and Data. When I was trying to install the rom I got an error telling me the Global rom file was corrupt and restarted the cellphone.
The problem is I am stuck in the Fastboot loop, can't access the recovery and my computer don't recognize the cellphone.
I know I ****ed it up, I was wondering if I can revert that or did I just lost a phone.
Thank you Guys.
Click to expand...
Click to collapse
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.

hochocnua said:
Read carefully and report
1. Try to hold down the buttons vol down and power, see if : fastboot devices sees it. If so XiaoMi Tool will restore it. If not do the same try recovery vol up + power. Do adb devices and see if anything shows up. Worst case you'll have to open the phone up and connect the EDL pins together and it will flash anything. I use minimal ADB and Fastboot phone plugged via USB cable into the computer and run those commands.
2. Fully bricks their device here is the unbrick factory method
https://c.mi.com/thread-1479882-1-0.html
that's connecting EDL pins with the phone case removed for a phone that doesn't boot at all
3. https://youtu.be/8mW0JzKow7E
here's the exact EDL test point required on Mi9
if you can't boot or recognize the device at all via fastboot or ADB. If this doesn't work nothing will...
But it will work, that's what the factory does. Obviously the last resort.
Click to expand...
Click to collapse
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.

pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
like and share

pedrohwelerson said:
My pc identify my MI 9 alright the problem is that I can't flash anything with MItools coz I don't have enable the USB debugging and I can't enable it because of the fastboot loop.
Is there a way to enable it with a CMD command?
If no I'll have to open de device and do the EDL.
By the way thank you for your help.
REally appreciated it.
Click to expand...
Click to collapse
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like

andrew2401 said:
Op if you'd like help restoring your device to working order. I could help you through TeamViewer. If you'd like
Click to expand...
Click to collapse
I would really like it.
Thank you

pedrohwelerson said:
I would really like it.
Thank you
Click to expand...
Click to collapse
Where are you from? Asking so I can take time zone difference into account when arranging a time

Question [Solved]I need help edl 9t (lime)

I want to flash stock rom with miflash, when i tried to flash it stuck on black screen and turns into edl, i tried to flash again and no use ( needs mi account authorization) and bricked, i need firehose without auth to unlock it please help.
Edit: I Just Created Firehose file for it without authentication.
Enjoy..

Hi. How did you created that file and what rom did you used ? How it will bypass mi account authorization ? Thanks.

Thx it works for Poco M3

Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode

furiousjay said:
Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode
Click to expand...
Click to collapse
Hi were you able to get rid of edl and start ur phone?

I am really very happy for your contribution, you just made a 16 year old boy so happy that he was even inspired to learn much more about software

Hey ! good to know you were able to patch it
I am also stuck in edl mode (Redmi 7 - onclite) .. can't find any way out ..//
Can you do a favour to me an patch my device firehorse too ..

Did not work 100% for me.
The latest global rom flashed without asking for authorized account so that's good but my redmi 9t stays in edl mode
Thanks for sharing though.

wamy007 said:
Did not work 100% for me.
The latest global rom flashed without asking for authorized account so that's good but my redmi 9t stays in edl mode
Thanks for sharing thoug
hold power button for 10s and it will exit on its own
Click to expand...
Click to collapse

@aryankaran Tried it already, did not work.
Phone tays in edl mode.

Update: when the battery is completely empty i can charge the phone and it seems to work but...
after i restart the device it's stuck again in edl mode.
I let the battery drain for 2 times now and it's 2 times the same outcome.

wamy007 said:
Update: when the battery is completely empty i can charge the phone and it seems to work but...
after i restart the device it's stuck again in edl mode.
I let the battery drain for 2 times now and it's 2 times the same outcome.
Click to expand...
Click to collapse
reflash different rom some partitions might got messed up / corrupted .. try

Redmi 9T Global work fine, it just doesn't automatically switch from edl mode, you need to hold the power button until it starts.

Hi
Plz help me
My phone is redmi 9t and i flash the poco m3 rom not by mi flash and my phone after the flash is breck.
I try very rom to edl mod but is erorr mi flash tools
I trying eng rom and flash complete but screen black and phone is edl mod again
Sory for bad english writing
The erorr is the picture

aryankaran said:
Hey ! good to know you were able to patch it
I am also stuck in edl mode (Redmi 7 - onclite) .. can't find any way out ..//
Can you do a favour to me an patch my device firehorse too ..
Click to expand...
Click to collapse
Please PM me.

furiousjay said:
Is there a certain firmware I have to use this file with? I flashed it with the latest ROM and my phone is still stuck in EDL Mode
Click to expand...
Click to collapse
YOUR PHONE STILL STUCK ON EDL MODE?

Question Redmi Note 10 5G Global stuck on MIUI Recovery after update to 12.5.5.0

Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.

the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool

wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks

I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks

I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this

jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM

wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.

Use MTK Bypass for reparing https://megafon929.github.io/mtk

Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?

i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk

Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.

LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com

Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader

Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!

The only solution is to wipe the phone. I got my lesson I will buy a samsung now

Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it

My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b

guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL

Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.

work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already