Related
Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance
Kithrae said:
Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance
Click to expand...
Click to collapse
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.
satishp said:
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.
Click to expand...
Click to collapse
Can i use Fastboot with locked bootloader?
Kithrae said:
Can i use Fastboot with locked bootloader?
Click to expand...
Click to collapse
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.
jazz452 said:
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.
Click to expand...
Click to collapse
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Edited. Now I get the mi logo back after an hour of changing.
Kithrae said:
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Click to expand...
Click to collapse
As you're not sure whether your phone is charging, I would suggest keeping it connected to the charger for a few hours. This way, it may eventually get charged atleast to a safe level at some point.
After this, if you dont already have ADB and Fastboot installed, install it from the guide in the forums. Make sure to uninstall PC Suite first.
Once ADB is installed, open up the shell, boot device into fastboot mode and connect to PC. In the command shell,
Type fastboot oem device-info
It should show you the device bootloader lock status. Though most phones which come with Vendor ROMs have unlocked bootloaders, this is not always the case as my phone came with a vendor ROM while bootloader was locked. I suspect this is because vendors may have a signed Custom ROM file which can be flashed using the stock recovery, meaning bootloader unlocking is not a necessity for them to load the custom firmware.
Once you check whether bootloader is unlocked, if it isnt, unlock the bootloader using the guide.
Then install MiFlash and flash the fastboot ROM
if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter
underlines said:
if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter
Click to expand...
Click to collapse
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.
satishp said:
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.
Click to expand...
Click to collapse
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.
Kithrae said:
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.
Click to expand...
Click to collapse
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.
satishp said:
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.
Click to expand...
Click to collapse
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?
Kithrae said:
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?
Click to expand...
Click to collapse
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.
Ok i will now Wait for my bootloader unlock message. Thank you
Kithrae said:
Ok i will now Wait for my bootloader unlock message. Thank you
Click to expand...
Click to collapse
You fixed it once then broke it again make sure its charged properly before your next F-up, like everyone keeps telling no use pc-suite, it's fixable and a free lesson on android mobile. How would you even attempt changing roms without mi-flash and adb. I'm betting its already unlocked did you check?
satishp said:
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.
Click to expand...
Click to collapse
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?
Kithrae said:
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?
Click to expand...
Click to collapse
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!
satishp said:
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!
Click to expand...
Click to collapse
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?
Kithrae said:
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?
Click to expand...
Click to collapse
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.
satishp said:
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.
Click to expand...
Click to collapse
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^
Kithrae said:
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^
Click to expand...
Click to collapse
No worries! Hope you get it running! Glad to help!
Cheers!
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
itzabhi said:
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
Click to expand...
Click to collapse
I found the solution all i had to do is change the rom folder to C:// and it worked!
Its not working for me plz help me
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
i dont know what is wrong but falsh is getting completed in 1 second.
roushancool said:
i dont know what is wrong but falsh is getting completed in 1 second.
Click to expand...
Click to collapse
Bro first of all u need to edit the flashall commands with the notepad and then u should put the rom folder on the desktop and put the mi flash tool on a separate folder also on the desktop if u want me to tell u what to edit just message me and i will tell u how ?
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
Bro first of all put the rom in a folder on the desktop (one folder and the files in it ) (not folder inside a folder)
Next copy the flashtool folder to the desktop also
Next edit the flash_all.bat and remove the commands up and keep only commands that starts with (fastboot)
And save.
Then choose the folder and then flash and make sure u choose only (clean all) and not (clean all and lock) from below goodluck bro hope the picture will make you understand
Not sure what I did but I am now stuck in a bootloop where it reboots every 10 seconds or so but I can't get into recovery or get to fastboot no matter how I press and hold the Power and up or down volume buttons? Is there any way out of this? I left the phone overnight and the battery wasted but as soon as I plugged it into the USB on my laptop again it went back to the bootloop.
So, just wondering is there a special sequence of buttons to press on the device, that I don't know of, when this happens?
Thanks
Did you flash anything?
Yes, I had switched from MIUI to PixelExperience (and I had unlocked the bootloader etc to do this) but I believe I did something wrong in the process and both my IMEI (which were still reported correctly) were not working - I thought this might be some firmware issue so I had flashed an update firmware but that did not help. So I went and flashed the Engineering ROM to see would that help resetting the device.
But that didn't help and I had lost TWRP so I refreshed TWRP and at that point it went into the bootloop. What I don't understand is why I can't get back to fastboot - I can understand maybe something went wrong with the version of TWRP I flashed (though I am pretty sure it was the same one I flashed originally when playing around with the PixelExperience ROM.
Anyway, just wondering if there was some other mechanism to trigger either the fast boot or some recovery as its like the boot loader fail to find anything appropriate to boot up from.
jeromeof said:
Yes, I had switched from MIUI to PixelExperience (and I had unlocked the bootloader etc to do this) but I believe I did something wrong in the process and both my IMEI (which were still reported correctly) were not working - I thought this might be some firmware issue so I had flashed an update firmware but that did not help. So I went and flashed the Engineering ROM to see would that help resetting the device.
But that didn't help and I had lost TWRP so I refreshed TWRP and at that point it went into the bootloop. What I don't understand is why I can't get back to fastboot - I can understand maybe something went wrong with the version of TWRP I flashed (though I am pretty sure it was the same one I flashed originally when playing around with the PixelExperience ROM.
Anyway, just wondering if there was some other mechanism to trigger either the fast boot or some recovery as its like the boot loader fail to find anything appropriate to boot up from.
Click to expand...
Click to collapse
Because you compromissed the boot process.
When your device try to boot, it make some checks first.
You need to flash the stock MIUI rom again.
VD171 said:
Because you compromissed the boot process.
When your device try to boot, it make some checks first.
You need to flash the stock MIUI rom again.
Click to expand...
Click to collapse
Yes, thanks, I imagine that is what happened but how can I flash when I can't get into recovery or get to into fastboot?
jeromeof said:
Yes, thanks, I imagine that is what happened but how can I flash when I can't get into recovery or get to into fastboot?
Click to expand...
Click to collapse
You need to flash the stock MIUI rom again using SPFLASHTOOL.
[GUIDE] How to properly solve the errors of the SP FLASH TOOL for MERLIN ? (Redmi Note 9 / Redmi 10X 4G)
WARNINGS: Keep your backup files safe and secure ! If you can, encrypt them. If you try to flash in "firmware upgrade" mode, bootloader will be LOCKED again ! Never try to flash in "format all" mode ! Otherwise, you will LOSE all secure and...
forum.xda-developers.com
jeromeof said:
Not sure what I did but I am now stuck in a bootloop where it reboots every 10 seconds or so but I can't get into recovery or get to fastboot no matter how I press and hold the Power and up or down volume buttons? Is there any way out of this? I left the phone overnight and the battery wasted but as soon as I plugged it into the USB on my laptop again it went back to the bootloop.
So, just wondering is there a special sequence of buttons to press on the device, that I don't know of, when this happens?
Thanks
Click to expand...
Click to collapse
If you have have adb drivers installed in your pc, try connecting your phone and open power shell. Then try this command.
Code:
adb devices
If it shows the device, then simply command
Code:
adb reboot fastboot
and flash the fastboot rom.
If not works, then follow VD171.
Also you should read threads carefully before flashing anything. Like there a tread about pixelplus UI. And they recommend to force reboot when you see the boot logo. To avoid boot loop.
Good luck
jeromeof said:
Yes, I had switched from MIUI to PixelExperience (and I had unlocked the bootloader etc to do this) but I believe I did something wrong in the process and both my IMEI (which were still reported correctly) were not working - I thought this might be some firmware issue so I had flashed an update firmware but that did not help. So I went and flashed the Engineering ROM to see would that help resetting the device.
But that didn't help and I had lost TWRP so I refreshed TWRP and at that point it went into the bootloop. What I don't understand is why I can't get back to fastboot - I can understand maybe something went wrong with the version of TWRP I flashed (though I am pretty sure it was the same one I flashed originally when playing around with the PixelExperience ROM.
Anyway, just wondering if there was some other mechanism to trigger either the fast boot or some recovery as its like the boot loader fail to find anything appropriate to boot up from.
Click to expand...
Click to collapse
Don't flash pixel experience. It's unofficial and it's and old version. I recommend you to flash pixel extended after solving and flashing latest fastboot rom. It's official and provide update every month. This rom is also a pure aosp based Stock rom.
Always read new treads before deciding
Redmi Note 9 ROMs, Kernels, Recoveries, & Other De
Improve your Redmi Note 9's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
jeromeof said:
Yes, I had switched from MIUI to PixelExperience (and I had unlocked the bootloader etc to do this) but I believe I did something wrong in the process and both my IMEI (which were still reported correctly) were not working - I thought this might be some firmware issue so I had flashed an update firmware but that did not help. So I went and flashed the Engineering ROM to see would that help resetting the device.
But that didn't help and I had lost TWRP so I refreshed TWRP and at that point it went into the bootloop. What I don't understand is why I can't get back to fastboot - I can understand maybe something went wrong with the version of TWRP I flashed (though I am pretty sure it was the same one I flashed originally when playing around with the PixelExperience ROM.
Anyway, just wondering if there was some other mechanism to trigger either the fast boot or some recovery as its like the boot loader fail to find anything appropriate to boot up from.
Click to expand...
Click to collapse
Also, before doing any customization, you have to flash the Indonesian fastboot rom. Because almost every development is based on Indonesian rom.
Mobarok_ said:
Also, before doing any customization, you have to flash the Indonesian fastboot rom. Because almost every development is based on Indonesian rom.
Click to expand...
Click to collapse
Indonesia V12.0.1.0 precisely (V12.0.1.0.QJOIDXM).
Here, you can find and download the rom: https://xiaomifirmwareupdater.com/miui/merlin/stable/V12.0.1.0.QJOIDXM/
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Ifuckinghatemyselfandall said:
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Click to expand...
Click to collapse
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
flairepathos.info said:
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
Click to expand...
Click to collapse
I am going to try the mtk bypass tool, is that going to work? if not i am going to try your instructions, however it did not boot into the recovery even after reflashing , i have tried that before with the twrp app
It cannot detect the device, it isnt in device manager either, i am getting scared
edit: actually it gets detected in device manager as "usb serial device (com4)" when i hold the power button, volume up and volume down at the same time, when i do that, the device stays with a black screen
SP flash tool still does not detect it
it seems to be disconnecting while in this state
Please help, i cant turn the device off
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Ifuckinghatemyselfandall said:
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Click to expand...
Click to collapse
You need to flash the SAME miui version present on the device first.
VD171 said:
You need to flash the SAME miui version present on the device first.
Click to expand...
Click to collapse
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
It is now giving me "error status error" please help
Ifuckinghatemyselfandall said:
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
Click to expand...
Click to collapse
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
VD171 said:
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
Click to expand...
Click to collapse
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Ifuckinghatemyselfandall said:
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Click to expand...
Click to collapse
Custom recovery will never brick a device.
VD171 said:
Custom recovery will never brick a device.
Click to expand...
Click to collapse
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Ilovethewholeworldbutme said:
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Click to expand...
Click to collapse
Just flash the full stock miui again.
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/rosemary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
OK nevermind I successfully got the phone booting again with miflash tool by reflashing an official firmware...
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/t/twrp-on-android-12.4522273/), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Click to expand...
Click to collapse
Hope it helps! ; D
dona3000 said:
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/ros mary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
Click to expand...
Click to collapse
Did u make sure ur on Miui 12.5.16.0.RKLMIXM?
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
fol!s said:
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
Click to expand...
Click to collapse
Greetings!
As this phone has an MTK processor, we don't really have a recovery image, it's stored in the boot img I suppose. That link, you can download the official rom to this. DISCLAIMER: There are two types of ROMs listed here, one type is fastboot, that you need now in order to flash it through a computer for example. The another type is the recovery rom, that you can flash from recovery like a magisk package, or anything flashable zip, or with adb sideload.
https://mifirm.net
You should choose global if you are in Europe, but it's suitable for devices in the US or USA probably, ony feature differences are here between an EEA and Global rom.
Also, if you install pixel experience recovery, you can install the firmware by going into recovery, and do it via sideload. Or, you can try flashing the rom with TWRP (tutorial linked below), but then you won't able to install updates automatically.
One question: Did you checked in OEM unlocking in developer options before flashed PE?
Hope it helps!
Yeah, I did checked the oem unlocking. I think the reason why i failed because my bootloader probably updated and I forgot to check. You need bootloader version 12.5.16.0.RKLMIXM to install the pixel experience. Also thank for help
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/members/gurtnyi.11842195), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Hope it helps! ; D
Click to expand...
Click to collapse
Can I do that on newer firmware or should I roll back to version 12.5.16.0.RKLMIXM? And if I roll back then I need to unlock device again?
I think you can. I've flashed it successfully on the latest version too. Currently I don't use PE but it was good for me.
Well, regarding to the unlock, it's not a big deal, you don't have to wait 168h again, once you've firstly unlocked your device, you can re-unlock it again, and again, no matter how many times, you don't have to wait a lot again.
But depending on how you rollback it,
I mean, with xiaomi flasher (i think that's its name) you can choose between clean all and lock, save userdata, and clean all, but in the first case, it'll lock back the bootloader. With SP flash tool (if you need, I can provide a link for the modified version of it, that doesn't require an auth file, but if fails, you need a python script, I can link that too), as I remember it won't lock back the device, but I'm not a 100% sure
Hope it helps!
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
raven17a said:
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
Click to expand...
Click to collapse
Corrected, thank you!
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
raven17a said:
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
Click to expand...
Click to collapse
Happy to hear that!
By the way, yes, pe recovery is better for sideloading, or eventually any not stock recovery. Also, if you install PE recovery, you can apply updates automatically, and in the future you won't need to flash it manually.