Related
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
ReproOne said:
I have been using "fastboot boot recovery.img" to load into TWRP after OTA updates to load SuperSU as I am only rooted using the stock ROM. However, after this recent update (2.16.651.4) that includes the WiFi Calling and Android 4.4.3, when I run the command it just causes the phone to reboot. It does not reboot into TWRP, which is my recovery.img file.
I found a Nexus thread talking about having to add a kernel command line for the Nexus after a certain version of hboot, so I am not sure if it is related.
Does anyone know how to fastboot boot now with the latest update? I would like to avoid replacing my stock recovery with TWRP and just continue to boot into it. Alternatively, is there any other way to install supersu?
Thank you,
Ben
Click to expand...
Click to collapse
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
Thank you for the reply. I thought about taking that approach, but I was really hoping someone would have an answer on why the procedure wasn't working now. My bootloader is still unlocked.
I found this as an approach someone did on the Nexus 4 for a similar issue:
fastboot -c "lge.kcal=0|0|0|x" boot customrecovery.img
Thoughts?
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
ReproOne said:
nfinitefx45:
I did just now flash TWRP into recovery, loaded SuperSU, and then flashed your recovery.img back to the phone. So thank you very much for the recovery.img.
I'd still like to know if fastboot boot can still work, and also if there is a way in the future I can get my own recovery.img (possibly back it up before taking an OTA)?
Click to expand...
Click to collapse
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Thank you for those steps. I do not have an external SD card installed, so I modified it to store the recovery.img on sdcard instead.
Now I can always fastboot flash twrp and then back to stock recovery.
Thank you again!
nfinitefx45 said:
not sure about the fastboot issue, but to backup your recovery any time just go to adb and type the following
adb shell
su
dd if=/dev/block/mmcblk0p43 of=/sdcard2/recovery.img
this will copy your recovery to the external sdcard
Click to expand...
Click to collapse
You would need root to do this. Not being able to use "fastboot boot" you would just be backing up the flashed recovery. Possibly towel root temp root, but I would assume it has been patched in newest update.
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
neudof said:
So I am S-On with a non-HK M8
I was on stock rooted 4.4.2 and I flashed the stock recovery and took the OTA
Now I am on 4.4.3 and still have SuperSU installed (not rooted)
Everything is working fine, but when I try to boot to recovery i get the red triangle with the !
Any suggestions?
Click to expand...
Click to collapse
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
xPhantom said:
That's the stock recovery. Did you ever flash a custom recovery back on after the OTA?
Click to expand...
Click to collapse
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
neudof said:
I am s-on & unlocked but i was able to flash the stock recovery from sd card to take the ota.
Is it possible to flash twrp back in the same way?
Click to expand...
Click to collapse
Yes, after the OTA, just flash TWRP back through fastboot and then re-flash SuperSU to get root back.
nfinitefx45 said:
As a quick work around flash twrp onto the device, once done with it then flash the factory recovery back, Also check to make sure your bootloader didn't relock after update.
stock recovery from the update.
Click to expand...
Click to collapse
I just applied the update released today, and I tried to save the recovery.img file before flashing TWRP. However, it kept giving me permission denied. Do you have the recovery.img file from the update released today so I can use it for the next update?
fastboot not working
please any help on how to access fastboot on HTC one m8.
its showing black screen n fastboot mode...
wot can I do 2 annul d problem
rooting problem
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
jinal shah said:
hey i am using htc one m8, i unlocked the bootloader and the device reads as
device status modified
*unlocked*
s-on
after this i flashed twrp and cwm a couple of times but its not loading on the device but shows success in the command window, however after clicking on recovery the custom recovery does not show up, and it reboots back into the fastboot mode.
please help me
thank you
Click to expand...
Click to collapse
What's the output in the terminal when you fastboot flash recovery?
rooting problem
It doesn't show any error as such.
In the command window it shows successful.
But when I click on recovery it reboots back to fast boot.
Like for a second it shows the screen which reads 'this build is only for developers'
But then instead of opening Twrp it reboots back to fast boot.
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Type: fastboot boot (path goes here)
You can drag and drop the twrp img into the command window. This will ensure you have the correct path
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
mingkee said:
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
joesee said:
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
Click to expand...
Click to collapse
The instruction shows how to flash recovery.img with TWRP though I have no clue how to do it.
I got that error the first time I did it, it was because of a misspelling of the command.
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Vseprz said:
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Click to expand...
Click to collapse
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
joesee said:
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
Click to expand...
Click to collapse
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Vseprz said:
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Click to expand...
Click to collapse
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
joesee said:
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
Click to expand...
Click to collapse
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
99problemz said:
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
If boot loader is unlocked you should load twrp from fastboot.
Vseprz said:
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
If boot loader is unlocked you should load twrp from fastboot.
Click to expand...
Click to collapse
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
joesee said:
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
Click to expand...
Click to collapse
I'm glad it all worked out! :good:
finding I have to re-flash with flashify each time
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
jdoebean said:
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
Click to expand...
Click to collapse
You drop the twrp file
In fastboot folder open command prompt and flash twrp first just rename it simply to recovery.img while in the fastboot folder
Type fastboot flash recovery recovery.img
Or just fastboot flash recovery.img
Then it should boot you into twrp
Once booting into twrp flash the supersu zip in your internal sd
Once you have root and reboot all you have to do is use flashify app and download twrp from the app and flash it Twrp sticks from there.
Sent from my LGMS631 using XDA Free mobile app
It all started when I tried to temporarily boot into the TWRP img file. It didn't work so I tried flashing the file to boot_a. Then I installed TWRP through the installer (stupidly didn't wipe the caches) and... Well. When I try to boot into System through TWRP, it gets COMPLETELY stuck at the powered by Android logo screen. No amount or combination of button holding will shut it off and I actually had to let the battery (thank you SO MUCH for non-removable batteries by the way, smartphone manufacturers >_>) drain before it would actually boot again. Rebooting it into Download mode will get it stuck in there too where every time I hold the power button and shut it off, it will just reboot right back into Download mode again. And now, here's probably the worst part. I CAN'T UNLOCK the critical partition to flash when in Download mode, so I can't use the OST tool! When I try to unlock it, it just complains that flashing unlock is not allowed even though the rest of the bootloader is completely unlocked.
TL;DR - When I power the phone up it goes straight into TWRP. Booting to System totally freezes it and the Bootloader puts it in a loop when I try to power it off. Critical partition is locked for some reason. I CAN get around the bootloader loop though and get back to TWRP by switching active slots and rebooting.
Did you flash the TWRP installer to your active boot partition or your inactive one? If you flashed it to the active one, you can't get into system anymore because TWRP is your boot partition.
If you are on Oreo, and you flashed to the inactive slot, and then patched the active slot, you have to reboot into the active slot recovery and flash the Magisk installer to disable verification of the partitions.
If you can get into the bootloader, and you still have the unlock key from nokia, do fastboot flash unlock <unlock.key>, and then fastboot oem unlock_critical. Then you should be able to flash using OST.
THMSP said:
do fastboot flash unlock <unlock.key>, and then fastboot oem unlock_critical. Then you should be able to flash using OST.
Click to expand...
Click to collapse
This unlocked it! Thank you! <3
I also did have an issue with the OST tool complaining that the updater was out of date, but changing the .mlf file and leaving it unpacked when I opened it in OST seemed to make it work perfectly. My phone is now booting just fine and back to stock!
Now I just need to solve the original problem I had. How can I install TWRP to recovery since the img file wouldn't temporarily boot last time?
EDIT: Apparently unlocking the critical partition seemed to solve the problem of the TWRP image file not temporarily booting as well!
S5Guy said:
EDIT: Apparently unlocking the critical partition seemed to solve the problem of the TWRP image file not temporarily booting as well!
Click to expand...
Click to collapse
No, thats because you flashed back the May firmware, where fastboot boot was still working properly. It only broke after the august update. If you want TWRP on newer security patch versions, you can get it here: https://bit.ly/nokia-nb1 in the folder "Boot Images". Those images are prepatched, you can safely flash them to your active boot partition. It also contains stock images for restoring before updating.
THMSP said:
No, thats because you flashed back the May firmware, where fastboot boot was still working properly. It only broke after the august update. If you want TWRP on newer security patch versions, you can get it here: https://bit.ly/nokia-nb1 in the folder "Boot Images". Those images are prepatched, you can safely flash them to your active boot partition. It also contains stock images for restoring before updating.
Click to expand...
Click to collapse
Yeah looks like you're right. Letting it update back to Android 9 deleted TWRP and made fastboot boot for TWRP nonfunctional again.
Wait, so can I use that TWRP boot image you specified to boot temporarily to TWRP and then run the installer zip? Or will that not work and I'll have to flash the img directly from the bootloader?
S5Guy said:
Wait, so can I use that TWRP boot image you specified to boot temporarily to TWRP and then run the installer zip? Or will that not work and I'll have to flash the img directly from the bootloader?
Click to expand...
Click to collapse
You have to flash it directly to your boot partition. fastboot boot will work for nothing (and even if it worked those images would just send you directly into the system)
THMSP said:
No, thats because you flashed back the May firmware, where fastboot boot was still working properly. It only broke after the august update. If you want TWRP on newer security patch versions, you can get it here: https://bit.ly/nokia-nb1 in the folder "Boot Images". Those images are prepatched, you can safely flash them to your active boot partition. It also contains stock images for restoring before updating.
Click to expand...
Click to collapse
Alright! fastboot flash boot_a (TWRP image) worked! Thank you so much for all the help. <333
Hi,
Im testing my phone without, NON-TWRP.
After root, and shutdown/restart the phone, the phone boots automaticly to Miui recovery instead of starting the phone normally...
After 10 min, the phone starts in the normall mode with root.
How to fix this that the phone that the phone doesnt boot into recovery mode of Miui?
Reflash tje boot.img from the rom.
krepsz said:
Reflash tje boot.img from the rom.
Click to expand...
Click to collapse
If I flash the orginal boot.img of the current rom, then its unrooted. But If I patch the current/boot.img of the current rom and flash it with the modified_magisk_boot.img file, it boot into the bootloop recovery; MUIU Recover 5.0
Ok. Than you have to reflash the rom. I mean its helps.
krepsz said:
Ok. Than you have to reflash the rom. I mean its helps.
Click to expand...
Click to collapse
What do you mean to reflash the rom?
I flashed now the orginal boot.img and now the phone boots but without ROOT.
Now, If i take the orginal boot.img to magisk_modified_boot.img (fastboot flash boot magisk_patched-25200_MSizj.img) then the phone gets in the recovery-MUIU 5.0 Bootloop.
So what am doing wrong?
Patch again the boot.img and flash it trough fastboot.
krepsz said:
Patch again the boot.img and flash it trough fastboot.
Click to expand...
Click to collapse
Same result... the next boot is into the MUIU Recovery bootloop.
I was on stock 12.1 (rooted, bootloader unlocked) and wanted to try out this ROM e/OS.
Went through the first step of flashing the recovery, after which it is now stuck in Fastboot mode.
I did try to boot into TWRP to install a ROM or do a factory wipe via Fastboot but any command just takes me back to Fastboot.
Any ideas on how to fix this?
Thanks.
bluegrass55 said:
I was on stock 12.1 (rooted, bootloader unlocked) and wanted to try out this ROM e/OS.
Went through the first step of flashing the recovery, after which it is now stuck in Fastboot mode.
I did try to boot into TWRP to install a ROM or do a factory wipe via Fastboot but any command just takes me back to Fastboot.
Any ideas on how to fix this?
Thanks.
Click to expand...
Click to collapse
What happens when you try to boot TWRP?
Is there an error message at the bottom of the bootloader screen?
V0latyle said:
What happens when you try to boot TWRP?
Is there an error message at the bottom of the bootloader screen?
Click to expand...
Click to collapse
It returns back to fastboot.
Just noticed the error message "error boot prepare"
bluegrass55 said:
It returns back to fastboot.
Just noticed the error message "error boot prepare"
Click to expand...
Click to collapse
Ah, this usually happens when you are trying to use a custom ROM with the stock boot image. Extract the boot image from the ROM you're trying to install then flash it to /boot.
Otherwise, use a GSI.
V0latyle said:
Ah, this usually happens when you are trying to use a custom ROM with the stock boot image. Extract the boot image from the ROM you're trying to install then flash it to /boot.
Otherwise, use a GSI.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
bluegrass55 said:
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
Click to expand...
Click to collapse
Managed to sort it out from the instructions on this website to unbrick Pixel4.
Restore Pixel 4/XL/4a to Stock Firmware via Fastboot | Unbrick it
In this tutorial, we will show you how to restore Pixel 4, 4 XL, and 4a to Stock Firmware via Fastboot Commands and then unbrick it.
satus.keystoneuniformcap.com
bluegrass55 said:
Thanks for the quick reply.
I'll try flashing the custom ROM boot image first. By GSI do you mean the stock boot image?
Click to expand...
Click to collapse
No, Generic System Image. May not be available for the custom ROM you're trying to use.
bluegrass55 said:
Flashing stock boot didn't work.
I hadn't flashed the custom ROM. Just the custom ROM recovery, with which you install the ROM.
Click to expand...
Click to collapse
I would suggest asking in the ROM thread, but make sure you read back as the question may have been answered before.
To get your device working for now, just flash back to stock