Related
I am downloading the 722 MB update over OTA right now. Check for software updates in system settings.
root
delphimon said:
I am downloading the 722 MB update over OTA right now. Check for software updates in system settings.
Click to expand...
Click to collapse
did you have your phone rooted? I can´t get the update, I get "There is no updates available for your device at the moment".
jla2024 said:
did you have your phone rooted? I can´t get the update, I get "There is no updates available for your device at the moment".
Click to expand...
Click to collapse
No, the phone has never been rooted. Running stock MF3 with no changes. Checked for update and it was there (still downloading).
delphimon said:
No, the phone has never been rooted. Running stock MF3 with no changes. Checked for update and it was there (still downloading).
Click to expand...
Click to collapse
My phone is rooted and it showed up!!!
Finished installing. 4.3 I537UCUBML2 confirmed
how i can install this rom on mi s4 active carrier Telcel
someone who can upload some zip to flash or créate .tar file
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
htcman724 said:
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
Click to expand...
Click to collapse
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
htcman724 said:
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
Click to expand...
Click to collapse
Had the same problem. Do I have to return to stock and un-root to install the update?
Devo7v said:
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
Click to expand...
Click to collapse
im redownloading it now as soon as its done i'll upload it
treystegall said:
Had the same problem. Do I have to return to stock and un-root to install the update?
Click to expand...
Click to collapse
I had the same problem, as well. Went through download, then restarted. Seemed to restart overly quickly, then saw that I was still on 4.2.2. Is there a log file somewhere that I can look at?
I will try and pull it off my wife's phone tonight!
Has anybody on MI2 been notified of an update? I'm guessing not since MI2 was a pre-release so it would be interesting to see if someone has.
Devo7v said:
Has anybody on MI2 been notified of an update? I'm guessing not since MI2 was a pre-release so it would be interesting to see if someone has.
Click to expand...
Click to collapse
I am on the MI2 leak rooted no OTA notification . Says up to date
I'm guessing I won't see OTA if I am on Tmo's network??
We are not left behind!
I can confirm, from Indiana, that the 4.3 update has come to the S4Active OTA.
Just gave it a try and I got the update downloading even though I'm on Tmo's network! Yes!! Wasn't working before cause I remember I removed KnoxAgent.apk and wssyncmldm.apk but I put those back and it's all good
Devo7v said:
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
Click to expand...
Click to collapse
ok so i went there and there was no zip file. tryed to reinstall it and it failed again. has anyone gotten it to install?
htcman724 said:
ok so i went there and there was no zip file. tryed to reinstall it and it failed again. has anyone gotten it to install?
Click to expand...
Click to collapse
I looked for the file as well and there was no zip located in cache\fota
---------- Post added at 10:25 PM ---------- Previous post was at 10:17 PM ----------
moppegaard said:
I looked for the file as well and there was no zip located in cache\fota
Click to expand...
Click to collapse
nevermind, I'm not rooted so I can't access the file
I'll have it uploaded within the hour to Dropbox unless someone beats me to it. I'm at 50% right now.
Upload took a little longer than I thought. Also file is .cfg and not a .zip from the OTA. But it will still run on phone through update. I'll post link and screenshots as soon as the file uploads.
Anyone got the update yet? I got a notification but when I tried to update it was gone.
Oh gosh I thought it was just me seeing things!
I downloaded the update and tried to update through the updater but failed. Got the message "Error:7".
I downloaded the update, change the zip file to update.zip. Using the updater without problem.
Now in 10.1.2
Stock Camera got night mode now, however, GCam still need "Buffer Fix" Option to work.
moarfish said:
I downloaded the update, change the zip file to update.zip. Using the updater without problem.
Now in 10.1.2
Stock Camera got night mode now, however, GCam still need "Buffer Fix" Option to work.
Click to expand...
Click to collapse
You updated coming from 10.1.1? From where did you get the zip file from?
Freeje said:
You updated coming from 10.1.1? From where did you get the zip file from?
Click to expand...
Click to collapse
You can download from here:
v10.1.2.0
http://bigota.d.miui.com/V10.1.2.0.....PEAMIFI-V10.1.2.0.PEAMIFI-c214dee6fa-9.0.zip
Wonder why the update is revoked. Anyone has a bigota update link or something similar?
Freeje said:
You updated coming from 10.1.1? From where did you get the zip file from?
Click to expand...
Click to collapse
Yes, this is an incremental update from 10.1.1.0 to 10.1.2.0.
The ROM of course is official, you cannot update an unofficial ROM without unlocking bootloader.
mushikago said:
Wonder why the update is revoked. Anyone has a bigota update link or something similar?
Click to expand...
Click to collapse
The update is not "revoked". It's just the moderator will remove any unofficial post of ROM in the forum. They want to keep all the ROMs under one official post.
hkwildboy said:
Yes, this is an incremental update from 10.1.1.0 to 10.1.2.0
The update is not "revoked". It's just the moderator will remove any unofficial post of ROM in the forum. They want to keep all the ROMs under one official post.
Click to expand...
Click to collapse
I see. So how did you download it?
Freeje said:
You updated coming from 10.1.1? From where did you get the zip file from?
Click to expand...
Click to collapse
mushikago said:
I see. So how did you download it?
Click to expand...
Click to collapse
Well, if you're so skeptical, then please wait for OTA.
https://forum.xda-developers.com/mi-8/how-to/xiaomi-mi8-global-stable-miui-10-1-1-0-t3875526
hkwildboy said:
Well, if you're so skeptical, then please wait for OTA.
https://forum.xda-developers.com/mi-8/how-to/xiaomi-mi8-global-stable-miui-10-1-1-0-t3875526
Click to expand...
Click to collapse
Apologies, I meant that as an honest question, not to sound skeptical. Just wanted to know how you downloaded it, as I'd like to install it too.
mushikago said:
Apologies, I meant that as an honest question, not to sound skeptical. Just wanted to know how you downloaded it, as I'd like to install it too.
Click to expand...
Click to collapse
No worries, it's always good to be careful.
Way to go brother.
hkwildboy said:
You can download from here:
v10.1.2.0
http://bigota.d.miui.com/V10.1.2.0.....PEAMIFI-V10.1.2.0.PEAMIFI-c214dee6fa-9.0.zip
Click to expand...
Click to collapse
Still can't figure out why I get the update "error:7" message from TWRP. I was able to update to 10.1.1.0 from 10.0.3.0 through the updater.
Freeje said:
Still can't figure out why I get the update "error:7" message from TWRP. I was able to update to 10.1.1.0 from 10.0.3.0 through the updater.
Click to expand...
Click to collapse
I renamed the downloaded file to "update.zip"
and updated through original ...About Phone -> System Update -> Choose Update Package.
hkwildboy said:
I renamed the downloaded file to "update.zip"
and updated through original ...About Phone -> System Update -> Choose Update Package.
Click to expand...
Click to collapse
I use the same method to update and success.
Freeje said:
Still can't figure out why I get the update "error:7" message from TWRP. I was able to update to 10.1.1.0 from 10.0.3.0 through the updater.
Click to expand...
Click to collapse
OTA update requires stock recovery.
You can use TWRP to flash the full ROM, but not OTA update.
I think this is the reason.
hkwildboy said:
OTA update requires stock recovery.
You can use TWRP to flash the full ROM, but not OTA update.
I think this is the reason.
Click to expand...
Click to collapse
Can someone upload V10.1.1 stock recovery ?
I got error 7
hkwildboy said:
OTA update requires stock recovery.
You can use TWRP to flash the full ROM, but not OTA update.
I think this is the reason.
Click to expand...
Click to collapse
Most probably. I'll just have to look for the full ROM.
c2781130 said:
Can someone upload V10.1.1 stock recovery ?
I got error 7
Click to expand...
Click to collapse
Full official information can be found here:
http://en.miui.com/thread-5022079-1-1.html
---------- Post added at 11:43 PM ---------- Previous post was at 11:43 PM ----------
Freeje said:
Most probably. I'll just have to look for the full ROM.
Click to expand...
Click to collapse
No full ROM out yet.
mi 8 global android pie is NOT GOOD
NO Night Mode as we all waited
battery time is worse than android OREO
i only did the update because i needed the Night Mode but it is only available to Beta Version not Global
so we have to wait longer
[Solved] So i was gonna download the december update but mid-download my wifi decided to suck. When the connection came back the download just resumed. It's finished now but I'm scared to install the update. Is there a way to delete the update file and redownload it? I'm not rooted and I don't want to flash the update. Please help!
KasraMC said:
So i was gonna download the december update but mid-download my wifi decided to suck. When the connection came back the download just resumed. It's finished now but I'm scared to install the update. Is there a way to delete the update file and redownload it? I'm not rooted and I don't want to flash the update. Please help!
Click to expand...
Click to collapse
just go to download location using file browser and delete the files you downloaded as normal
I don't remember but the name is something like ht team or ht something on root of internal sd
KevMetal said:
just go to download location using file browser and delete the files you downloaded as normal
I don't remember but the name is something like ht team or ht something on root of internal sd
Click to expand...
Click to collapse
I didn't download a flashable file i downloaded the normal way from settings. It's fine the emui updater checks for the integrity of the file and im on the latest update with no problems so far.
On PKQ1.19041.001.WW_Phone-16.0622.1907.33-0
Copied this file ( UL-ASUS_I001_1-ASUS-16.0631.1908.12-1.1.3-user.zip ) from ASUS update server to my ASUS phone to the root folder (internal storage) it sees the file and I get a message saying that my phone can be updated. But when I click ok to upgrade, it fails.
Anyone try this and successful? Any ideas what the heck I am missing here?!
TY
Maybe corrupted download? Try downloading again.
I had a corrupted download and ended up bricking my phone. Had to flash the Raw 1906 then incrementally update to 1908
stealthj said:
Maybe corrupted download? Try downloading again.
I had a corrupted download and ended up bricking my phone. Had to flash the Raw 1906 then incrementally update to 1908
Click to expand...
Click to collapse
Let me download it again. Hope it works. If this does work, I will feel a lot better about updating my awesome phone in the future. Coming from Samsung on AT&T hopefully ASUS keeps the updates fairly regular.
Nope, still not working. Oh well, guess I can wait for the raw version.
But if anyone has any ideas on what I am missing, please chime in.
jkeener88 said:
On PKQ1.19041.001.WW_Phone-16.0622.1907.33-0
Copied this file ( UL-ASUS_I001_1-ASUS-16.0631.1908.12-1.1.3-user.zip ) from ASUS update server to my ASUS phone to the root folder (internal storage) it sees the file and I get a message saying that my phone can be updated. But when I click ok to upgrade, it fails.
Anyone try this and successful? Any ideas what the heck I am missing here?!
TY
Click to expand...
Click to collapse
If you haven't changed the fingerprint to WW yet, the OTA file will be recognized and fail. Change fingerprint and you should be good
xxBrun0xx said:
If you haven't changed the fingerprint to WW yet, the OTA file will be recognized and fail. Change fingerprint and you should be good
Click to expand...
Click to collapse
I never set a fingerprint. so if I set one now, and then try the update it might work? I guess I will try that and see what happens.
jkeener88 said:
I never set a fingerprint. so if I set one now, and then try the update it might work? I guess I will try that and see what happens.
Click to expand...
Click to collapse
It's not a physical fingerprint, it's how the phone identifies itself. Follow this guide: https://forum.xda-developers.com/ro...w-rom-changing-cn-fingerprint-t3969765/page12
jkeener88 said:
I never set a fingerprint. so if I set one now, and then try the update it might work? I guess I will try that and see what happens.
Click to expand...
Click to collapse
you probably got a Chinese 8gb version with flashed WW firmware, which means no OTA anymore. You gotta flash manually after unlocking the bootloader, rooting and so on.
skromnia said:
you probably got a Chinese 8gb version with flashed WW firmware, which means no OTA anymore. You gotta flash manually after unlocking the bootloader, rooting and so on.
Click to expand...
Click to collapse
Thanks, ya learning a lot on this phone. Just got figure it all out without bricking my ROG!
xxBrun0xx said:
It's not a physical fingerprint, it's how the phone identifies itself. Follow this guide: https://forum.xda-developers.com/ro...w-rom-changing-cn-fingerprint-t3969765/page12
Click to expand...
Click to collapse
Thank you so much for pointing me in the right decision, and also although I don't see that many Subaru vehicles in Houston, I plan on getting one this year or maybe next year. Thanks again, up to 1908 now. :good:
Chinese 8gb Tencent q
I'm on 1906 ww. I understand this phone needs a manual flash each time, do I need to flash with every update using raw files and will this also wipe the phone so every update means a wipe?
Can I root, install twrp and simply update the firmware no issue or is it bs?
How do I actually manually update to this? When I hold down on the options button and choose "more options", it still only says Auto-Download System Update
Do I need to flash through fastboot?
Edit: Nevermind, I restarted my phone and it gave me a pop up saying it sees the update
viper98 said:
How do I actually manually update to this? When I hold down on the options button and choose "more options", it still only says Auto-Download System Update
Do I need to flash through fastboot?
Edit: Nevermind, I restarted my phone and it gave me a pop up saying it sees the update
Click to expand...
Click to collapse
i just update to to latest one
u need twrp
put twrp and magisk and the update on root of ur device
flash twrp it will crash first time the next restart will work without any problem
flash and select the latest ota update that u downloaded from asus it take some time
then flash twrp again then flash magisk after all done reboot
work for me no problem
Hi all,
I have downloaded UL-ASUS_I001_1-ASUS-17.0210.2001.60-1.1.97-user.zip from the Asus website and placed the file at the root of the disk. Reboot and I'm getting notified there is an update, click update and it informs me the update failed straight away. Both the firmware and fingerprint have been flashed to WW. Any help would be greatly appreciated.
Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services. I will reflash for clean install...
Edit: did it and it was more or less the same. But it seemed to be something related to MagiskHide. I hided in Magiskhide com.android.blablablablalbal.unstable (just that) and it was fine
I am already on WW Rom and fingerprint WW too but safety net fails
Hi Team,
I just bought ROG 2 tencent and it came loaded with WW rom and WW fingerprint as details below.
Issue- it Passed safety net and everything works fine including netflix, youtube.
Question: is there anything need to do before manually updating to A10 ?
Tried to root the udate but its not detecting. How to update manually ?
Current details
ROM: WW_Phone-user 9 PKQ1. 190414.00116.0631.1910.44-0
Fingerprint: asus/ww_I001D/ ASUS_I001_1:9/PKQ1. 190414.00116.0631.1910.44-0
Please Please Help m crying now
urii13 said:
Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services and I will reflash for clean install...[/QU
If possible, please explain the clean installation method in detail. The only way to update flash is to flash?
Thanks
Click to expand...
Click to collapse
MP888 said:
Hi Team,
I just bought ROG 2 tencent and it came loaded with WW rom and WW fingerprint as details below.
Issue- it fails safety net and everything works fine including netflix, youtube.
Question: is there anything need to do before manually updating to A10 and pass the safety net ?
Current details
ROM: WW_Phone-user 9 PKQ1. 190414.00116.0631.1910.44-0
Fingerprint: asus/ww_I001D/ ASUS_I001_1:9/PKQ1. 190414.00116.0631.1910.44-0
Please Help m crying now
Click to expand...
Click to collapse
Tried to update by copying *UL-ASUS_I001_1-ASUS-17.0210.2001.60-1.1.97 Zip to root, but no luck its not detecting
please help
nigc said:
urii13 said:
Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services and I will reflash for clean install...[/QU
If possible, please explain the clean installation method in detail. The only way to update flash is to flash?
Thanks
Click to expand...
Click to collapse
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse
urii13 said:
nigc said:
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse
:good:
Thanks for your video for inastall a10 ?????
Click to expand...
Click to collapse
urii13 said:
nigc said:
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse
:good::good:
This is how you did it
You may explain in more detail
Links to download
Is there a video of this?
Click to expand...
Click to collapse
nigc said:
urii13 said:
:good::good:
This is how you did it
You may explain in more detail
Links to download
Is there a video of this?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=3fFICBHt5VU
See this video, and other from this guy. He explains everything.
Click to expand...
Click to collapse
urii13 said:
nigc said:
https://www.youtube.com/watch?v=3fFICBHt5VU
See this video, and other from this guy. He explains everything.
Click to expand...
Click to collapse
This method does not FIX the problem
Click to expand...
Click to collapse
nigc said:
urii13 said:
This method does not FIX the problem
Click to expand...
Click to collapse
If you see every video of installation you can see the steps I've put duplicated at all.
Click to expand...
Click to collapse