Hi there,
I'm facing a huge problem and I can not find the solution Googling and reading in randon forums.
Basically after unlocking the bootloader I wanted to relocked it again to avoid fingerprints issues, so that's the problem. I did something wrong and everytime I press Power button it appears a message saying
"The current image(boot/recovery) have been destroyed and cannot boot..."
The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing.
I have downloaded the .ozip file which contains the ROM files, but I don't find the "rawprogram0.xml" or related files to flash the phone properly with Qualcomm Flashing tools.
I have also tried with "Msm download tool" but the program gives me and advert which says that the .ofp file is not correct blablabla.
Do you guys know where to get the proper ROM with rawprogram0.xml and patch files?
I would really appreciate your help because I'm getting crazy with this issue and I don't know how to fix it.
Thanks so much.
guide CN Version
How to Install Stock ROM on Realme X2 Pro (RMX1931)
Before doing anything, we need to have the ROM file for the designated device ie Realme X2 Pro. Here is the download link for the same.
Download Stock ROM File
RMX1931_11_0110: Download
Installation Guide
Before beginning with the installation remember a few pointers we have mentioned below.
Pre-Requisites
This ROM is exclusively for the Realme X2 Pro (RMX1931). Don’t use it on other devices.
Charge your phone completely before installing the ROM.
A Windows PC/Laptop
Download and install Realme USB drivers on your Windows PC.
Download QFil Tool or QPST Flash tool and install on your PC.
It is always recommended to take a backup of your Android Device.
Backup Android Phone Without Root on any device
If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery
GetDroidTips will not be responsible for any hardware or software issue happening to your phone upon installing this firmware or following this guide. Perform this installation at your own risk..!
Method 1: Instructions to Install via QFIL Tool:
Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using QFIL tool
Guide to Install Stock ROM using QFIL Tool
Method 2: Instructions to Install via MSM Download tool:
Download the MSM Download tool, firmware, and drivers on your PC.
Now install the USB drivers
Place the MSM download tool and firmware in the same folder
Open the MSM download tool and connect your device to PC/Laptop
Once you connect, it will automatically load the firmware, if not select it manually.
Click on start button and wait patiently to complete the installation process.
Once it is done! remove your device from PC. That’s it!
Method 3: Instructions to Install via QPST Tool:
Here are the instructions you need to follow in order to install Stock ROM on the Realme X2 Pro :
First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
You will find two files with the name: Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip QPST folder
Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop QPST install
After Installation, Go to the Installed Location in the C Drive
Open the QPST Configuration QPST Configuration exe open
Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it QPST Configuration
Now Open the EMMC Software Downloader in the same folder located all the QPST Files EMMC Software download
In EMMC Software Downloader, Check program boot loaders -> Browse for the device com portEMMC Software download Browse
Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)click and load xml
Now tap on Load Patch def and browse for patch0.xml in folder ROM load patch
Check the search path 2 and browse for the folder ROM search path QPST
Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
That’s it! Once your installation is done! Reboot the phone! Congrats, you successfully installed Stock ROM on Realme X2 Pro.
So, that’s it, guys. Now you know how to install stock ROM on Realme X2 Pro (RMX1931). We hope this tutorial was helpful to you. In case you have any queries do let us know in the comments.
Check out this guide CN Version
Thanks for the reply, but it does not help. I have followed all the guides found in Google, but none has the correct ROM to get rawprogram0.xml and patch.xml files.
Btw, I have European Global ROM (RMX1931EX)
yj_206 said:
Thanks for the reply, but it does not help. I have followed all the guides found in Google, but none has the correct ROM to get rawprogram0.xml and patch.xml files.
Btw, I have European Global ROM (RMX1931EX)
Click to expand...
Click to collapse
did you try via fastboot to fix it ? it might work with the official global rom
natedogg20050 said:
did you try via fastboot to fix it ? it might work with the official global rom
Click to expand...
Click to collapse
any solition?, i have de same case
I think I almost have it, but I need the scatter file, any of you have it generated?
natedogg20050 said:
did you try via fastboot to fix it ? it might work with the official global rom
Click to expand...
Click to collapse
"The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing."
Isavar said:
any solition?, i have de same case
Click to expand...
Click to collapse
I sent it back to the shop and they gave me a new one. I said it was "updating issue"
There should be a fix hopefully soon, maybe check the thread how to lock the bootloader maybe it helps
What are people using to extract from ozip?
yj_206 said:
Hi there,
I'm facing a huge problem and I can not find the solution Googling and reading in randon forums.
Basically after unlocking the bootloader I wanted to relocked it again to avoid fingerprints issues, so that's the problem. I did something wrong and everytime I press Power button it appears a message saying
"The current image(boot/recovery) have been destroyed and cannot boot..."
The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing.
I have downloaded the .ozip file which contains the ROM files, but I don't find the "rawprogram0.xml" or related files to flash the phone properly with Qualcomm Flashing tools.
I have also tried with "Msm download tool" but the program gives me and advert which says that the .ofp file is not correct blablabla.
Do you guys know where to get the proper ROM with rawprogram0.xml and patch files?
I would really appreciate your help because I'm getting crazy with this issue and I don't know how to fix it.
Thanks so much.
Click to expand...
Click to collapse
Did you find a fix?
i have one now with "The current image(boot/recovery) have been destryed and can not boot"
any ideea? the client bring to me in that mode. I think i nned test point because the phone its in the bootloop, i cant make nothing with taste combination. I will open the phone first to remove battery... will see after... Thx in advance!
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
good, the phone enter in HS mode without battery with vol+ and vol - pressed... will see next step. I'll try with QFil first...
xchris said:
i have one now with "The current image(boot/recovery) have been destryed and can not boot"
any ideea? the client bring to me in that mode. I think i nned test point because the phone its in the bootloop, i cant make nothing with taste combination. I will open the phone first to remove battery... will see after... Thx in advance!
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
good, the phone enter in HS mode without battery with vol+ and vol - pressed... will see next step. I'll try with QFil first...
Click to expand...
Click to collapse
did you made to unbrick the device?
any update guys.....i have the same problem and i can't seem to find any solution
I have extracted the firmware and I got patch0.xml , rawprogram0.xml , prog_firehose_ddr.elf and bunch of other files .
I upload a picture of the files .
The firmware is RMX1931_11_A.11 .
I do not have this device yet and I am not 100% sure how to use it but as I understand there is an option to flash though QPST tool on EDL mode.
Update - I also extracted RMX1931EX_11_A.06 global firmware .
how did u extract the ozip file ??
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
or965 said:
I have extracted the firmware and I got patch0.xml , rawprogram0.xml , prog_firehose_ddr.elf and bunch of other files .
I upload a picture of the files .
The firmware is RMX1931_11_A.11 .
I do not have this device yet and I am not 100% sure how to use it but as I understand there is an option to flash though QPST tool on EDL mode.
Update - I also extracted RMX1931EX_11_A.06 global firmware .
Click to expand...
Click to collapse
how did u extract the file ??
uv.007 said:
how did u extract the ozip file ??
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
how did u extract the file ??
Click to expand...
Click to collapse
The OZIP file does not have any of the files that are needed to flash on QFIL tool. I extracted the ofp file .
I currently uploading the extracted files of the Global and CN versions and will post a partial guide of how to flash it through QFIL .I do not 100% sure that it will work as I have not tested it and the guide will be very dangerous and only recommended for people with hard bricked devices that have locked bootloader . I bought this device and waiting to receive it .I was planing to unlock the bootloader of the device and then I read that many people have hard bricked their device and decided to search a way to unbrick this phone in case that I will hard brick the phone in the future.
or965 said:
The OZIP file does not have any of the files that are needed to flash on QFIL tool. I extracted the ofp file .
I currently uploading the extracted files of the Global and CN versions and will post a partial guide of how to flash it through QFIL .I do not 100% sure that it will work as I have not tested it and the guide will be very dangerous and only recommended for people with hard bricked devices that have locked bootloader . I bought this device and waiting to receive it .I was planing to unlock the bootloader of the device and then I read that many people have hard bricked their device and decided to search a way to unbrick this phone in case that I will hard brick the phone in the future.
Click to expand...
Click to collapse
do u have any link for ofp file for realme X2 (RMX1992)
[/COLOR]
uv.007 said:
do u have any link for ofp file for realme X2 (RMX1992)
Click to expand...
Click to collapse
I just search on Google and found one, RMX1992EX_11_A.15_191029_ea418f8c.ofp - https://drive.google.com/file/d/1quux10IHGy6T_dbHljbdxaqWPY-ZBeg_/view
This is an ofp firmware, you can not extract it with winrar or 7 zip,you need special software . If you need I can upload an extracted version . The guide that i will post should be also good for the realme x2 as it has a snapdragon CPU .
or965 said:
[/COLOR]
I just search on Google and found one, RMX1992EX_11_A.15_191029_ea418f8c.ofp - https://drive.google.com/file/d/1quux10IHGy6T_dbHljbdxaqWPY-ZBeg_/view
This is an ofp firmware, you can not extract it with winrar or 7 zip,you need special software . If you need I can upload an extracted version . The guide that i will post should be also good for the realme x2 as it has a snapdragon CPU .
Click to expand...
Click to collapse
downloaded this zip and it's mirror too both are corrupted some crc issue
Related
**UPDATE RESOLVED**
For anyone who searches and has same problems.
I needed an sdcard to get the files onto the phone.
To recap - it was stuck in boot, TWRP would load and stated no OS installed.
1. In rooting guide as per Here download file linked in the guide and unzip.
2. From folder 3 of that zip file there is a folder called data containing stock.img - place this onto sdcard.
3. Then go to this thread and download the files as hosted on mega.nz - over 2 gig.
4. Extract that zip to the sd card so that on the card is a folder called 'dload'
5. To confirm, the dload folder should have update.app and 2 folders called dt and hw
6. Put sdcard into phone.
7 .Boot into TWRP
8. Goto install, select storage, select your sdcard then select stock.img, agree to install, ignore message about no os.
9.Once that has installed my phone just restarted, EMUI came up, read the dload folder automatically and ran.
Then once phone started it found a newer update and installed that.
Phone is now working, unrooted and bootloader is locked again.
All this was found on the XDA site, just across various posts.
Thanks again to all.
********ORIGINAL BELOW********
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
fabgav said:
Hi all.
Please help, I'm a ****!
I unlocked bootloader with Huawi code from thier website.
Then I installed TWRP
Which in turn installed SuperSU
All rooted, jobs a fish. as per - This one and This thread.
Decided I dont need root anymore.
Tried to reset and wipe the phone.
Went into TWRP did a factory reset wipe.
Then went into TWRP again and did advanced wipe, and selected everything.
(yes yes i know, what a tit)
So after that i get the 'this phones is unsecured' message, press up vol 3 seconds, press power button to conti, wait 5 seconds etc.
so I wait, and it sticks on 'Your device is booting'
Restart, can get into stock recovery and hisuit will see the phone and try to restore it but fails and say my device is not supported??
Can get into erecovery and connected to wifi to try and update but does not find anything to download.
can get into twrp.
I have downloaded a stock rom as per -- This ROM
Perhaps this is not the correct ROM, but then how do i find out the correct ROM needed now I can not access phone details?
Forced that onto SD card but TWRP will not run it and says it is corrupt.
I can see it with ADB and device manager so my question really is....HELP??
How can i get just stock rom back onto it and then un-root and re-lock the bootloader?
Cheers in advanced.
Click to expand...
Click to collapse
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update
here's a list of update files: https://forum.xda-developers.com/hu...huawei-p9-lite-firmware-compilations-t3517124
and here you can find the oeminfo files, there's a google drive link under oemfiles, at least for the vns-l21, 22 and 31: https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
mjz2cool said:
you can find the model (for me it's vns-l31) on the back of the phone, just find the corresponding oeminfo file and the update file. flash the oeminfo file, put the update file from the rom zip in the dload folder and reboot using the 3 button combo till it says something about installing update[/url]
Click to expand...
Click to collapse
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
first of all, no, p9 is a different phone, but you posted on the p9 lite forum. i'd suggest posting this question on the p9 forum.
i don't know exactly how it works for the p9, but it shouldn't be much different.
for the rom zip: inside that zip there's an update.app file, that file should indeed be put in a new folder called dload, but it won't be installed through twrp.
on the p9 lite it works like this: you flash the oemfile through twrp, and after that push and hold both volume buttons and the powerbutton till the phone reboots and shows an update progress screen, then you can release the buttons. now the update file will be installed. but then again, i don't know the procedure for the p9 so be sure to post your question on the correct forum.
edit: i've taken a look on that link to the stock rom you tried installing, it's a zip file that contains the dload folder, just put that folder on the root of your sdcard. do make sure it's the correct version.
you will have to flash the stock recovery for your phone however, and if the p9 works the same way as the p9 lite you should find an oeminfo file and flash that with twrp.
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
fabgav said:
So sorry, I didn't realise I was in the lite forum!
I'll ask a mod to move, sorry and thanks for you help.
Click to expand...
Click to collapse
here's a link to the oeminfo for eva -l9: https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 i think that one should be flashed in twrp, and after that you can use the 3 button combo
no problem at all
fabgav said:
Hi, thanks for the reply.
All of those links refer to the P9 Lite - is this the same internals and software as the normal P9?
On the back of my phone it has - Model- EVA - L09 FCC ID: QISEVA-LO9 - IC: 6369A-EVALO9
I do not see how this relates to specific oeminfo file?
Lasatly, can you provide details on how to flash the oeminfo file to device and do you mean the following for the update:
So in rom sip there is a update.app file - extract this to sdcard in a new folder called dload? then install that via twrp?
Cheers
Click to expand...
Click to collapse
Hello
Here it is p9 lite.
Section p9 is here. https://forum.xda-developers.com/p9
I think you are looking for this.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Yes the steps are.
Bootloader
Twrp
Flash Cxxxoeminfo
DLOAD Bxxx
SOLVED
First post updated with fix.
Thanks for all the help here on XDA
deleted by user
Any other place i can download the "dload" file beisides mega...please any help...
Yureka 2 :NO OS installed .Do you want to reboot ? Clicked reboot.Mobile hangs
Hi,
I tried to install Lineage OS 15.1 custom ROM using TWRP recovery in my Yureka 2 YU5551. I wiped out the data before flashing. During flashing I faced Error 7 and unable to install custom ROM.Twrp asked this- NO OS installed. Do you want to reboot? I Clicked reboot and my mobile not even booted properly. Still hangs. I tried to open recovery mode using the power button and volume up and volume down button. I am unable to go to recovery mode. When I connect my mobile to my laptop its not recognizing as the phone is not restarting.
Can someone plz help me how to install an OS and start my phone. Thanks in advance.
Thanks
Thinagharraj
Hello sir, please notice me. Can I possibly get another link to get the stock.img because the link that you gave was already not available. Hoping for your response. Thanks
I have sticker in recovery no OS installed + no backup + locked bootloader
What can I do
----------------------/----------------------
Any one please help me
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
I have the same problem but with a different firmware.. now only thing i can do is use dc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
MobileTechArena said:
I have the same problem but with a different firmware. now only thing i can do is usedc-phoenix paid software (15$ for 72h of use). I will try that tomorrow as i also can't find exact same firmware it was on my phone.
Click to expand...
Click to collapse
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
barnabaXXX said:
Thanks for reply. I will take that into consideration, but from what I see you were looking for PRA-LX1C432B106 and they indeed have the c432 roms there, however they don't seem to have the ones that I have been looking for. They have a list of firmwares online. Anyway good luck.
Click to expand...
Click to collapse
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Thanks for making it clear. Please tell me if it worked or not. Thanks.
barnabaXXX said:
I want to flash my phone with stock firmware, but I cannot find it anywhere.
I am looking for PRA-LX1C738B123.
I own Huawei p8 lite 2017
I wiped my system because I wanted to install other rom, it didn't work so I want to go back to the original.
Unfortunately I wasn't smart enough to do a backup before so I am stuck atm. The bootloader is unlocked and flashing works, I can boot into huawei eRecovery and TWRP. (eRecovery gives the getting package info failed error) I have tried the dload method with other app files, it fails at 5% every time tho.
I tried using Huawei Update Extractor and Firmware Finder but I cannot find the exact firmware.
Could someone help me with installing my firmware? Oh and I am kinda new and it would be nice to get some guides,
Thanks.
Click to expand...
Click to collapse
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
barnabaXXX said:
Thanks for help! I tried but i dont' have factory reset option. All I have is Shutdown, reboot and "Download leastest version and recovery" and after I click that all it does is wants internet connection. I logged in to my wifi but it didn't work and I ended up with "getting package info failed screen".
Click to expand...
Click to collapse
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
barnabaXXX said:
I got rom that allows me to do a factory reset, it's stuck at 99% for like 2 hours now, is it normal? If not what should I do?
Click to expand...
Click to collapse
Unfortunately I can't help you further than what I already posted.
But keep updating in case someone more knowledgeable peeks in.
similar problem....I was fairly good but play store was stuck in pending download....
I did a wipe in TWRP, and ended with a black screen...
I can boot to eRecovery, but it fails.and also to TWRP.
when attached to PC it keeps being seen and unseen as if its stuck in a power on cycle
Any help would be greatly appreciated.
Already Tested
JStrel said:
Hello ! I think I could be of some help since I encountered the exact same problem !
edit: well I just realized I can't find your ROM with firmware finder either, sorry for the failed attempt
In your case I'd try with each firmware until one would work or a I tried them all.
You need some utilities first :
- Firmware Finder
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
It will allow you to find the stock ROM that fits your model
-Huawei UPDATE extractor
https://forum.xda-developers.com/showthread.php?t=2433454
It will allow you to extract the .img files from the firmware previously downloaded.
-fastboot and adb
https://forum.xda-developers.com/showthread.php?t=2317790
The programs that will allow you to flash the .img files.
Now:
1. Find your ROM using firmware finder (the model is usually on the box you received the android in).
2.Extract the necessary .img files : system.img, boot.img, recovery.img.
3.Reboot into the bootloader, connect your device to your computer, open a cmd exe (powershell in my case) by holding shift+right click on the folder containing the .img files and flash each .img file, e.g. for the system file:
"fastboot flash system system.img"
4.then use "fastboot reboot" and after that shutdown your device
(in my case even after flashing the .img files I was greeted by a blank screen, so I shutdown my device holding the power button).
5. Boot into recovery holding vol up + power buttons (be sure to disconnect your device before shutting down and powering it up again) and choose factory reset.
It should then reboot into ROM installation procedure where you will have to follow the same steps as when you booted your device for the first time.
edit: formatting
Also, as far as my limited knowledge goes, there is no custom ROM officially supported for our dear device.
Click to expand...
Click to collapse
Hello did you already test ???
Here is the solution for every PRA-LX1: [http : // www . htcmania . com / showthread . php ? t=1326478] (sorry for the spaces, but I don't have enough posts written to post external links )
Unfortunately, it's from a spanish forum. I didn't found any problem to follow this tutorial, but maybe for someone it could be a little difficult.
Anyway, it works!
MobileTechArena said:
Yes, but any PRA-LX1C432 i tried doesn't work for me, flashing by fastboot. I believe any PRA-LX1 should work on this phone, but i will need to use that dc phoenix software to flash it.
Click to expand...
Click to collapse
Where did you find the C432 firmware? I can't succees to find it
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Iocere said:
Flashing to a completely empty phone via DC phoenix or manual via fastboot still didnt got my device started. Sometimes I end up in the eRecovery and sometimes its just stuck at boot.
I tried different version from the hicloud but none so far did the trick. Maybe someone can point me into the right direction so i can finally rescue this phone?
EDIT:
PRA-LX1C432
Sorry cant link to these files since i don't got 10 posts. Maybe PM ?
Copied the Mega TWRP backup (B100) to SD card
Flashed TWRP via fastboot
Disconnected the USB cable
Boot into TWRP
Restored TWRP backup
Restarted phone into fastboot
OEM unlocked it
Got booted into TWRP since no stock recovery there
Booted into fastboot again
flashed stock recovery
Android started to work!
Tried to update to B164 and failed
Reboot
Now it offered B110 and I tried to update to B110. Success.
Click to expand...
Click to collapse
Yeah, that's the way! It worked for me too!
juanmemo said:
Yeah, that's the way! It worked for me too!
Click to expand...
Click to collapse
Also i noticed everytime a OTA fails you get the full version offered on next boot. So you should get a full B164 aswell after it failed
JStrel said:
Yes I had the exact same problem, but once I did what I described, by rebooting into recovery (without twrp), I finally had the option to restore factory settings.
I believe the issue is in the fact you don't have access to the stock ROM for your model.
Click to expand...
Click to collapse
how can you boot into recovery ? i can only boot into twrp or fastboot & rescue or if i plug the huawei to the pc erecovery ???
---------- Post added at 12:16 AM ---------- Previous post was at 12:13 AM ----------
i have an huawei pra-lx1 c530 it used to boot into pra-lx1c530b111 rooted and twrp but now it doens't boot anymore, i'd like to flash to c530b160 but i can't find the firmware images
tiagoggama said:
Hello did you already test ???
Click to expand...
Click to collapse
Thanks men
I CONFIRM IT WORK PERFECTLY
For the second part go to this link for more detail :
https://boycracked.com/2016/03/14/h...-unbrick-firmware-any-huawei-android-devices/
Hello all developer,
here is the link https://androidfilehost.com/?w=files&flid=259881
(link changed 20180326, files now on AFH)
inside "H9L"
- H9L-PartList...........................................................Partition-List from my H9L
- recovery_ramdis.img................................custom-recovery
- recovery_ramdis.img.header.........custom-recovery-header
- update.app.gz......................................................update.app zipped with gzip
- update-app-gz-md5..................................md5sum update.app.gz
if download o.k. / md5sum o.k. / unzip
then have fun :laugh:
other message to me
you feel free to give "Thank's"
if i can help you - this is fun for me :angel:
i am extract from this update.app recovery_ramdis.img and system.img. This is the way return to custom-OS by my testing with developer-ROM. !!!
updated 20180404 :
excuse me. please. beginner mistake. i write custom, i mean "factory". this update.app is a copy from my phone. is comming with OTA on my phone
Hey JamesBott!
Glad to see you got it sorted:good:
This wil give a lot more users, myself included confidence to try out a custom ROM, knowing the can safely go back again.
I will try it out over the weekend
is it twrp zip or adb sideload zip?
@jusumgeezer
testing and the file's = o.k. - have fun! my fun is your fun :laugh:
i love the community and this is a little bit relove :angel:
@aveemashfaq
it's zipped on linux with gzip. o.k.?
and Linux-sha256sum
You need other info - write here please
boot loop hoor 9 lite
Hello
I can't use it in my sd card after extraction in the dload folder i have "check update, install the update... and his blocking a 5% then reboot loop"
I have try all the wipe and factory reset for nothing (so I lost usb debuging and adb communicates liked with my honor 9 lite)
i'm really lost, please save me I needs a solution to return on the original firmware
My basic problem is the xposed framwork installation (without module no time) after installing my honor as restart and go loop boot T_T
it's possible to force hisuite to inject in my honor the good firmware ?
sorry for my bad english i'm french.
thanks you in advance for your help
Pyro.ted said:
"check update, install the update... and his blocking a 5% then reboot loop"
Click to expand...
Click to collapse
Same here. Any way to force that update?
evolucja said:
Same here. Any way to force that update?
Click to expand...
Click to collapse
now i trying this
https://forum.xda-developers.com/p9/help/huawei-updater-hisuite-t3548003
send me u'r result
Pyro.ted said:
now i trying this
https://forum.xda-developers.com/p9/help/huawei-updater-hisuite-t3548003
send me u'r result
Click to expand...
Click to collapse
Well I managed to unpack system.img via Huawei Update Extractor but after flashing via TWRP it does not boot (bootloop on Honor animation).
evolucja said:
Well I managed to unpack system.img via Huawei Update Extractor but after flashing via TWRP it does not boot (bootloop on Honor animation).
Click to expand...
Click to collapse
ok ty i stopped my search i wait when hisuite think at add the firmware on eRecovery via wifi or via the soft hisuite directly by update ... :/
Hi all
requirement : honor 9 lite with LLD-L31 8.0.0.x(C432), bootloader unlocked.
everyone how flash : you ar developer & tester on your phone ! you carry the responsibility !
i am use pur custom-rom, no xposed framwork ...
can you go with phone in bootloader-mode ?
by me : phone off / usb-wire out of phone / press and hold "vol-down" and put usb-wire in phone. start phone in bootloader : bingo!
you see on bootloader-screen "unlock" & "unlock" in red (by me) the phone is ready to flash
then extract from update.app "recovery_ramdis.img & header" and "system.img & header"
put this 4 files in adb-folder / Windows: open command and cd.. to this folder / on linux open terminal and cd.. to the folder
on my linux-pc i am this files in /home/username/adb. if i start terminal i am automatically in my home-folder and write only "cd adb". this is short-way
fastboot devices (check is phone connected)
if phone connected : fastboot flash recovery_ramdisk recovery_ramdisk.img (extracted out update.app)
next fastboot flash system.img (extracted from update.app)
if this ended : you have customOS on phone
next fastboot erase userdata (this doing what you reed : erase! userdata)
next press and hold "vol-up" and power, phone vibrate and you see Huawei-boot: release power, you see pre-boot messages: release "vol-up", phone boot in erecovery
in erecovery wipe cache and factory-reset . this mace low-level format user_data 0...100%. now is userdate clear and fresh formated. reboot
phone boot as a new phone ! now config, install apps ...
if your phone boot to bootloader and bootloader is unlocked: you can do this how match you need
i test developer-rom's from other phones (oreo) and have this 4..5x doing and it's working way. stony way, hard way - but is working. My phone run.
i hope this is helpful
i hope you think on this: by now is no twrp with working backup & recovery available and i found by now not working developer-rom for this phone. i search continue.
you can on this way only restore the customOS - nothing else. no userdata.
AND FLASH NEVER OTHER as "recovery and/or system". ALL OTHER can brick your phone
excuse my writing "i am use pur custom-rom". i mean "stock-rom" : original manufacturer rom
Just for Info
This is Tread for "Here is the Update.App LLD-L31 8.0.0.127(432)FULL"
Not "how to repair bootloop"
Please make new thread "how to repair bootloop"
i am help if i can help!
only i am write what's working by me. And what's not. That's all
Pyro.ted said:
Hello
I can't use it in my sd card after extraction in the dload folder i have "check update, install the update... and his blocking a 5% then reboot loop"
I have try all the wipe and factory reset for nothing (so I lost usb debuging and adb communicates liked with my honor 9 lite)
i'm really lost, please save me I needs a solution to return on the original firmware
My basic problem is the xposed framwork installation (without module no time) after installing my honor as restart and go loop boot T_T
it's possible to force hisuite to inject in my honor the good firmware ?
sorry for my bad english i'm french.
thanks you in advance for your help
Click to expand...
Click to collapse
by this time is nothing download by huawei - sorry
look post #10
this work by me. it's work by you? test on your own risk!
next day i make new thread "how i repair my bootloop" with emphasis of "my". please wait
look https://forum.xda-developers.com/9-lite/development/honor-9-lite-how-repair-bootloop-t3768384
ok i going to try this method now thanks and yes i have bootloader and fastboot but no twrp i send you my result
thanks again for your help
---------- Post added at 10:21 AM ---------- Previous post was at 09:42 AM ----------
OMG it's work really thanks again and again now i forgot this twrp i just go rooting and no more X)
You are my Savior
thanks again
other question..
tonight i go trying to flash my honor for install Xposed sdk26 for oreo 8.0.0 i send u my result in 12 hour i think this can work i see that tonight
have a good day
@Pyro.ted
that's a good idea. i not use Xposed. you have custom-recovery and -system and can always reflash - no risk !
i hope for "twrp full function". then we have backup from all and can "test - not working - restore" and "no-risk & full-fun"
... don't work i'v try with arm & arm64 sorry
can i install it in my lld l10?
@leon21062000
lld-l31 = european version.
lld-l10 = ? (country) version.
I do not think so. It can work - but not either, i can not gauge the risk. I mean, let it be better
JamesBott said:
@leon21062000
lld-l31 = european version.
lld-l10 = ? (country) version.
I do not think so. It can work - but not either, i can not gauge the risk. I mean, let it be better
Click to expand...
Click to collapse
how long used it in lld-al10
Here I present you my toolkit for flashing TWRP and rooing Redmi Y2/S2/YSL.
Requirements
1. PC
2. Fastboot Drivers
3. Unlocked Bootloader (Guide)
4. Flashing TWRP Toolkit
5. Magisk flashable file
Steps for Flashing TWRP
1. Download the file. Link given in the end of the threads.
2. Boot your device into Fastboot mode (in power off state press power button + volume down button).
3. Connect your device from pc.
4. Now open the downloaded folder and run the file "Flash.bat".
5. Then press any key to continue.
6. Now your phone will automatically boot into TWRP.
7. Now you have sucessfully flashed Twrp.8. Before rebooting your device do flash lazyflasher-no-verity-opt-encrypt.zip.
Note :-
* If you don't flash Lazy Flasher then the Custom recovery will be replaced with stock recovery in next Boot.
Steps for Rooting
1. Download and place the Magisk zip fiile into your device.
2. Boot your device into TWRP Recovery (in power off state press power button + volume up button).
3. Select the option of 'Install' and then locate the directory where you have placed the Magisk file and select it.
4. After selecting the file, swipe the arrow loacted at the bottom.
5. When the flashing is completed click on 'Reboot System'.
6. After the phone has booted successfully install magisk apk.
Congrats you have rooted your device !!
Note :-
* This is Exclusively for Redmi Y2/S2/YSL and if you try this on any other device probably you may be bricking your device!!
* I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
* First boot may take upto 15-20 mins. So don't panic.
Links :-
* TWRP Toolkit - Click here
* Lazy Flasher - Click here
* Magisk - Click here
will try this as soon i am able to unlock my bootloader, thanks!
(i hate xiaomi for locking the device for 1 month....!! )
Flashing LF ends in endless boot. No loop but endles bootscreen 1,2,3 dots endlessly! Any ideas ?
So I got stuck on Bootscreen.
I flashed MIUI with TWRP and was back on stockrom with stockrecovery.
Then I booted TWRP temporarely with ADB. (adb command: fastboot boot twrp.img )
Now I installed Magisk and I am happy now
Just DON´T install TWRP. Boot it temporarely !
I used MIUI from here: https://www.theandroidsoul.com/download-miui-10/
Screen asking for PASSWORD.
The TWRP screen asks for password. Default password does not work and after format data the files are not displayed. Same case in clicking cancel.
use xiaomi eu roms they dont ask twrp password
twrp password
Twrp asks for password. What kind of password is this? How to use twrp without the password? How to use this twrp?
Has anybody got rooted redmi s2 finally?
In particular, with stock rom?
finally yes
When TWIRP asks for password nothing helps. The only thing I could do is to wipe ALL THE PARTITIONS except for external SD card, of course. Yes , you loose everything on your phone. Now, you flash the ROM you want (I flashed the stock ROM). After that, you flash the Magisk file. It is important not to reboot in between. After rebooting you have the new system installed. After initial configuration, you have to manually install the Magisk Manager apk.
P.S. the Lazy thing is not needed. TWRP persists.
Want mbn file of unlock bootloader redmi y2
i need emmc_appsboot.mbn file of unlocked Redmi y2(s2) 's bootloader.
If someone has unlocked y2 then please send me the file.
This TWRP for Custom ROM, and if you flash on RI MIUI will not work with any method as well. Especially if you Flash LazyFlaser will certainly be bootloop (stuck on logo)
sumit17 said:
i need emmc_appsboot.mbn file of unlocked Redmi y2(s2) 's bootloader.
If someone has unlocked y2 then please send me the file.
Click to expand...
Click to collapse
for bypass UBL you can try this
Pass : firmware firmware27
danigp75 said:
for bypass UBL you can try this
Pass : firmware firmware27
Click to expand...
Click to collapse
It will bypass only or unlock it too?
sumit17 said:
It will bypass only or unlock it too?
Click to expand...
Click to collapse
unlock too
danigp75 said:
unlock too
Click to expand...
Click to collapse
Bro it is unable to detect my device. But adb commans are recognizing my device and Mi Unlock tool also detect my device.
But this Soft is not able to detect my device. Giving me error
sumit17 said:
Bro it is unable to detect my device. But adb commans are recognizing my device and Mi Unlock tool also detect my device.
But this Soft is not able to detect my device. Giving me error
Click to expand...
Click to collapse
to be able to use this application you must enter EDL mode or "TEST POINT". After devices are detected 9008 on PC, proceed with running the application. Don't forget to enter the "firmware27" password.
Hopefully it can help for UBL redmi YSL without having an official UBL.
danigp75 said:
to be able to use this application you must enter EDL mode or "TEST POINT". After devices are detected 9008 on PC, proceed with running the application. Don't forget to enter the "firmware27" password.
Hopefully it can help for UBL redmi YSL without having an official UBL.
Click to expand...
Click to collapse
For test points i have to dissemble my device. Lol, If you can give me emmc_appsboot.Mbn from unlocked device then it may can help me.
Skyfire1 said:
So I got stuck on Bootscreen.
I flashed MIUI with TWRP and was back on stockrom with stockrecovery.
Then I booted TWRP temporarely with ADB. (adb command: fastboot boot twrp.img )
Now I installed Magisk and I am happy now
Just DON´T install TWRP. Boot it temporarely !
I used MIUI from here: https://www.theandroidsoul.com/download-miui-10/
Click to expand...
Click to collapse
from where did you downloaded the ROM ?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
shiva sandeep said:
use xiaomi eu roms they dont ask twrp password
Click to expand...
Click to collapse
Where can I download the EU roms ?
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
Novikovmex said:
When TWIRP asks for password nothing helps. The only thing I could do is to wipe ALL THE PARTITIONS except for external SD card, of course. Yes , you loose everything on your phone. Now, you flash the ROM you want (I flashed the stock ROM). After that, you flash the Magisk file. It is important not to reboot in between. After rebooting you have the new system installed. After initial configuration, you have to manually install the Magisk Manager apk.
P.S. the Lazy thing is not needed. TWRP persists.
Click to expand...
Click to collapse
from where did you download the rom ?
Israelleite said:
from where did you downloaded the ROM ?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
Where can I download the EU roms ?
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
from where did you download the rom ?
Click to expand...
Click to collapse
From the official Xiaomi site
Israelleite said:
from where did you downloaded the ROM ?
Click to expand...
Click to collapse
The link is in the quote in the line above your question. Or am I misunderstanding you ?
https://www.theandroidsoul.com/download-miui-10/
It is about midpage, the last in the list of phones, just above the section where it says
"How to install the MIUI 10 update"
Hello,
After installing this 'LavenderOs rom': https: //sourceforge.net/projects/team-tentacles/files/, my smartphone does not start anymore. Fastboot or recovery ps. Can i do something ??
Try using EDL mode
---------- Post added at 09:40 PM ---------- Previous post was at 09:27 PM ----------
toto6976 said:
Hello,
After installing this 'LavenderOs rom': https: //sourceforge.net/projects/team-tentacles/files/, my smartphone does not start anymore. Fastboot or recovery ps. Can i do something ??
Click to expand...
Click to collapse
Maybe you flashed a rom for lavender (redmi note 7) instead of rolex(redmi 4a) so now your device is bricked, but thanksfully, there's a way to fix it. Follow the link below:
https://c.mi.com/thread-1479882-1-0.html
For easiness, here's the link for mi flash tool.
MIFLASH TOOL
And here's the stock firmware:
ROLEX FIRMWARE
Also, next time, whenever you dowload a rom, remember that your device is rolex. In the rom file name, see ROLEX.
Good evening,
I followed this tutorial: https://www.youtube.com/watch?v=sjHMp9ayjak&feature=emb_rel_end
to be able to connect my redmi 4a with the pc. I was then able to launch Mi flash Tool and flash the stock global developer rom.
at this stage, the mobile still does not turn on. No connection via fastboot or adb.
toto6976 said:
Good evening,
I followed this tutorial: https://www.youtube.com/watch?v=sjHMp9ayjak&feature=emb_rel_end
to be able to connect my redmi 4a with the pc. I was then able to launch Mi flash Tool and flash the stock global developer rom.
at this stage, the mobile still does not turn on. No connection via fastboot or adb.
Click to expand...
Click to collapse
Why did you flash developer rom. Try to flash the rom which link i gave. Also, check if your usb cable is working or not.
Edit:
Also, do you tet the ful method.
You need to remove back cover.
Then using a tweezer, press the two edl pins on mobile motherboard(be carefull not to damage it)
Then connect to pc and open mi flash and flash the ron which link i gave you above. It should restore your phone. Otherwise, show it to a shop.
The usb cable works because I was able to connect to the pc and Mi-Flash tool.
I always put a stock developer rom because I want to be able to install behind a custom rom. So I need the unlocked bootloader.
I will try with your rom. No, I have not tried the full method. I will do it.
I hope the battery is not dead ...
toto6976 said:
The usb cable works because I was able to connect to the pc and Mi-Flash tool.
I always put a stock developer rom because I want to be able to install behind a custom rom. So I need the unlocked bootloader.
I will try with your rom. No, I have not tried the full method. I will do it.
I hope the battery is not dead ...
Click to expand...
Click to collapse
Umm, i have never installed a developer rom and i am still able to flash custom roms. Currenlty i am using crdroid 6.3 rolex
It seems all right
Thank you
Hello,
I started the procedure twice.
Each time, for the mobile to turn on again, it was necessary to disconnect and reconnect the battery cable and the one that allows the EDL (small cable next to that of the battery); otherwise, the mobile remains off whatever we do.
This is not mentioned anywhere in any tutorial. I put it here in case it could help one out.
Another thing, your stock rom seems better than mine because I got the scale in landscape format. However, I read in the tutorial that you transmitted to me that there could be fakes in the global stock roms ...
Hi. I cannot download the custom crdroid rom 5. I only have 6. and I cannot install the 'viper4android' module from magisk on Android 10. It seems that the application cannot be install only on android 7.8 or 9.
would you have a link for crdroid 5?
Hi. Do you have a valid link for a global developer rom?
I explain: by installing 'your stable rom' via edl mode, I got all my sensors. then I flash twrp and the problems start. I have error messages during installation. then the lineages os 17 rom installs well except that ... I no longer have my sensors ... So I was wondering if with a rom developer, it would change something
Hi. Do you have a valid link for a global developer rom?
I explain: by installing 'your stable rom' via edl mode, I got all my sensors. then I flash twrp and the problems start. I have error messages during installation. then the lineages os 17 rom installs well except that ... I no longer have my sensors ... So I was wondering if with a rom developer, it would change something
toto6976 said:
Hi. Do you have a valid link for a global developer rom?
I explain: by installing 'your stable rom' via edl mode, I got all my sensors. then I flash twrp and the problems start. I have error messages during installation. then the lineages os 17 rom installs well except that ... I no longer have my sensors ... So I was wondering if with a rom developer, it would change something
Click to expand...
Click to collapse
It happend with me too, all you need to do is re-flash your persist (it contains all the sensor files).
---------- Post added at 01:46 AM ---------- Previous post was at 01:43 AM ----------
To flash persist,
join the official redmi 4a group in telegram (if you use): t.me/redmi4aINT
Here, you will find persist zip.
Also, persist is device specific.
OR.
From the stock rom file. copy "persist.img" to you internal storage.
in twrp, open terminal and type
Code:
simg2img /sdcard/persist.img /sdcard/persist_EXT4.img
dd if=/sdcard/persist_EXT4.img of=/dev/block/bootdevice/by-name/persist
It will fiix it.
Hello,
Thank you for your help. Everything is working. On the other hand, the rom 'crdroid' does not work correctly. I returned to lineage 17.
I don't know how it says [solved] in the title?