Related
Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
You could replace the micro usb port...
Connect phone to pc and run samsung kies it will repair files then open kies, go to tools and install drivers then get into download mode and flash with odin
michaellengyel33 said:
Hello everyone,
I installed a rom on my rooted phone and it did not go well. Now the phone is bricked.. Normally I would be able to fix this. But a few months ago the phone stopped being recognized by my computer. Still charges but the port is damaged some how and no pc will recognize it. I can not get it into recovery I have tried and tried again and again. Still stuck in android with the triangle around it. And sometimes I will get a symbol with a phone-triangle-pc. Does this mean it is done, shot, bricked for ever? LOL
Click to expand...
Click to collapse
I can fix this. Send me a PM.
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
clickervet said:
I am having a similar issue. My phone is soft bricked on the AT&T splash screen with no ability to get it into recovery. The micro USB is completely non-functional.
I am (was?) running CM7 when the problem occurred. I have considered just about every option I can think of (and have had the phone together and apart twice to see if I could get the port working... no dice) including having the phone boot from an external SD card but this still seems to need some ability to get into recovery, which I do not have.
Any creative solutions (short of just buying a new phone...)
Click to expand...
Click to collapse
You could send it to the guy above to have a new micro usb port installed or MobileTechVideos.com. I had them fix a hard brick on my Captivate and would use their services again in a heart beat if I needed to.
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
humblepie88 said:
Hi all kind bros and sis,
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
You see.. I rooted my P990 using unlock root and chanced upon CM7 and thought of giving it a try. I installed clockworkmod and downloaded the stable release of 7.1 for Optimus 2x.. following the instruction to do a Nandroid backup and proceeded with the Mod..
Not knowing that I need to wipe everything including data.. I just selected the Dalvik cache wipe and proceed with the mod. The process went for more than 15mins and I saw some graphics (the android figure going round and round) but it just stuck there... the screen went blank and when I touched those home or back buttons.. they will lighted but nothing happens. I can't power it off also. So I manually took out the battery and put it back before powering up again. The android picture appeared again briefly for about 1 min and just hanged there. I took out the battery again and this time it was dead.. no matter what I press : vol + and power buttons together; home+Vol+ + power down; Vol- + power down.. all those do not revive the phone.
I tried taking out the external SD card and try powering up. The LG logo appeared and got stuck there.
I searched on Google and found the smartflashtool. I tried that and managed to install the NVidia boot recovery driver and stuff correct. Hold the vol+ button and power key before plugging in but the smarttool did not find the com port or communication driver whatever so I couldn't flash it back to stock.
I'm very desperate and stuck now... did I just accidentally burned the board or something? What bad luck I have
If that's the case, will I still be able to bring the phone back to LG service centre and get it repaired?
Please help me.. any kind souls out there. I really liked the phone and hoped to bring it back. else it's such a shortlived phone... really breaks my heart to see this..
Thanks in advance...
Click to expand...
Click to collapse
Try using SmartFlashTool, download the LG stock ROM (can be found here in XDA forum, i'll help you find the link), flash the .bin and .fls files.
humblepie88 said:
Please help me out as I think I've really bricked my less than 2 months brand new Optimus 2X..
...
"Hold the vol+ button and power key before plugging in but the smarttool did not find the com port..."
Click to expand...
Click to collapse
Turn off the phone. Hold Vol-DOWN while plugging it in. Start Smartflash and see the com-ports magically appear.
Follow trymhansen's instructions. He helped me before with my softbricked phone.
I hope you get your O2X back to life! Keep us posted
Best of luck to you!
PS. I also believe you should pull out the battery after turning off the phone in Trym's instructions. Trym correct me if I'm wrong please.
Hi All,
Thanks for your kind replies. I did follow your instruction. Take out the battery (I removed the ext SDcard as well), press and hold -vol and plug in the phone via USB. Afterwhich start up smartflash tool.. still nothing happens and no com ports are found.. The version of smartflashtool that I used is Dec 2010. Do I need to get the latest one and also the LG united drivers installed?
I also tried starting smartflash tool before the sequence.. still the same. BTW.. my OS is Win 7. Is it supported?
Really at my end's wit. Hope I can bring my phone back to life soon and I'm not really bricking it. I heard Samsung phones are not that easy to brick and can get to the recovery mode pretty easily. is it true?
Please help me.. thanks
Hi bros,
Attached are my screenshots from the device manager and smartflash tool... both seems not able to find the phone and allocate a com port. I've tried installing the latest LG mobile driver 3.6 but no help as well
Have you followed instructions as described here http://forum.xda-developers.com/showthread.php?t=1008070 ?
Also, try to attach your phone directly to computer, using usb ports from computer mainboard. I have experienced problems when attaching it via extension usb cord or attaching it to computer case ports. (I hope that you can understand what I have mean to say with usb )
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
humblepie88 said:
Hi Memhis,
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
I'll try to use another computer which is running Win XP and try again. I've downloaded those 3 files from that thread you recommended try using those instead.. hope it can be detected this time else I think I'll have to send to LG service for repair tomorrow.
I've been jailbreaking and modding my Iphone a lot and everytime whenever there's a near brick situation.. I'm able to fix it but not this time with an Android or LG perhaps... I hope I don't have to go to the extend of using ADB low level to push some files which I saw in one of the thread that one of the guys did that.. but I doubt I can since my windows can't even detect the phone!!
Maybe this will be my first and last LG phone if I ever get it repaired...
Click to expand...
Click to collapse
launch smartflashtool first, extract the .fls and .bin files, hold down volume at the same time plug in the usb port to your comp. you must see a s/w updating logo in your phone's screen and smartflash should detect your phone. then click start!
Sent using a phone.
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
humblepie88 said:
Hi mrgian,
I just tried to revive my phone by using the same method on a different laptop running on Win XP.. plugged directly to a side USB port but still no luck. There's no s/w updating logo appearing on my phone and smartflashtool also failed to detect my phone. I've found another thread opened by another user and my situation is exactly the same as his :
http://forum.xda-developers.com/showthread.php?t=1161583
But lucky for him is that he's able to get it working after changing to another PC but I've tried 3 different machines and no luck so far...
I'll try to use the NVflash as a last resort and see if I've any luck with NVflash at all.. If it failed again.. I think I've no choice but to send it to the repair centre for servicing then..
Click to expand...
Click to collapse
does the laptop have lg drivers installed?
Sent using a phone.
inflance hotota
mrgian said:
does the laptop have lg drivers installed?
Sent using a phone.
Click to expand...
Click to collapse
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
humblepie88 said:
Yes.. I've installed the latest LG united mobile driver version 3.6. Any wrong with that version... Really don't know where / what is missing or my phone is really fried after just one mod attempt?
I've also tried NVflash and it's stuck at the "bootloader initialization" screen....
Nothing appeared on the phone... not even LG logo. Can't believe LG phones are so fragile and unmodifiable
Click to expand...
Click to collapse
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
you got a point there.
Sent using a phone.
humblepie88 said:
Yes.. I followed exactly the instructions from the thread and I've plugged into a USB port directly to the computer which is one of the ports in front.. not via any extension or USB hub.. still it did not detect.
Click to expand...
Click to collapse
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
LarsPT said:
When you say an USB port in the front do you mean an USB in the back? Because the ones in front are the case ones, the ones in the back are the good ones, i.e. the ones that are directly attached to the mobo.
Click to expand...
Click to collapse
I've tried the recovery via 2 diff laptops and plugging in directly to one of the side USB ports but to no avail as well.. I think I've plugged in the phone correctly but there's no reaction at all/
mrgian said:
can you entet CWM? Press volume down til s/w will appear.
Sent using a phone.
Click to expand...
Click to collapse
How to enter CWM? I can't even power up the phone and no reaction at all when plugged into USB via smartflash.. the screen remains black. It's liked the whole phone is burned or something... but strange thing is that it can detect APX and asked to install drivers... but after successfully installing the Nvidia boot recovery driver.. the com ports does not get discovered.. What is wrong?
chupi_24 said:
try to charge the battery first...power off your device and charge it...maybe leave it charging for about 1hr even if you dont see anything on the screen( i believe after plugin the charger you will see the charging logo but it will disapear after a few seconds)...after 1 hr unplug and try to check if it will boot to clockwork recovery...if yes then just do complete data wipe...also try installing the ext3 back.zip, it will help delete system files(sometimes CWR is not deleting this)...hope this help
Click to expand...
Click to collapse
I plugged in the phone with battery but there was no charge logo or whatever.. the screen remains blank.. I'll try to leave it charging and see what happens. But I've remembered there was still about 80% power when this disaster happened and I've taken out the battery since.. so the charge should have remain? Btw.. where can I get this ext3 back.zip and how to use it? thanks
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Press recovery combos when your turning off, see if that works, you might just be holding power too long and it turns on again
No usb at all? If you can connect with adb, you can reboot to recovery that way.
Combo.
unotresocho said:
Hi everyone,
I started to use custom roms about some months ago, and I'm facing my biggest problem right now, hope someone can help me.
I flashed my phone via TWRP Custom recovery with CM10.1 and one day, suddenly the pin (that little entering for the charger and usb cables) stopped working, so I couldn't charge my phone in any "normal" way, I started using a direct battery charger. But today I flashed my phone with another version of CM and forgot to wipe data/cache, so now it's stucked in the CM boot animation. Thing is, I can't even access to recovery mode to flash again because for some reason, everytime I turn my phone off, it turns on automatically. Without pressing any button, and it doesn't give me time to do the vol-/home/power combo. I can't use any direct cable alternative either for what I described above. So I was wondering if some of you had a similar problem and can give me a hand with this. I'd be very much appreciated it.
Many thanks and greetings from Perú!
unotresocho.
Click to expand...
Click to collapse
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Hi, thanks all for your advices. I try em all but with no sucess. Though, something weird happened today. After the battery completely drained I tried charging it with the my regular charger, the cable to the wall one, and the phone vibrated, like it recognized it, but didn't turn on. Just vibrated. So I tried again using my micro USB to PC cable and the phone vibrated again when I plugged in to the USB port, but didn't turn on either, nor the PC recognized the device. Don't know if this is good or bad :S
If you have any more ideas, please let me know.
Thanks!
Unotresocho.
AlexGardunio said:
Use key combos mate... and after the phone vibrates, release only power button for avoiding the autorestart :fingers-crossed:
Click to expand...
Click to collapse
I'm trying this, but it keeps auto restarting. I'll describe what I'm doing, maybe there's something wrong:
1. Insert the battery.
2. Phone vibrates, I press Vol-/Home/Power and Samsung Galaxy S3 mini shows.
3. Keep pressing the combo and the phone turns off
4. Release the power button
5. Phone vibrates and again shows the Samsung logo and then the CM boot animation
Turn off again and same.
Thanks for the advice!
Hi again, I managed to get to "Odin Mode", the recovery that comes by default with the phone. Don't know why if I had TWRP installed. Does anyone know if it's gonna help me in some way? Remember I can't use a cable
Thanks!
How did you get into "Odin Mode"? Are you sure the cable is not working when the phone is in download mode?
Got into it by doing the button combo, tried several times and it was tricky but finally got it. And yeah I quickly connected to the computer (I have a Macbook but I also try on a PC) neither of them recognized it. Don't know what else to do
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
As far as I know the phone should not vibrate everytime you put battery back. But if you're able to go into odin you should be able to go into recovery (unless volume up key is damaged). But... while in odin... you can go back to stock rom and that should solve lots of your problems mate.
tys0n said:
Try wireless adb.
When connected to computer:
Code:
adb shell
su
reboot recovery
Click to expand...
Click to collapse
Hi tys0n, thanks for your suggestion. I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app. Do you know any other way to get it?
Many thanks!
unotresocho said:
I did a little research and found that to connect the phone on adb wirelessly I'd need a previously installed app.
Click to expand...
Click to collapse
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
deconectat said:
You also need a working rom.
If the usb connector on the phone is broken, you can buy another one for 4$ on ebay, but you'll need to solder it and it's a smd component with small pins, so it may be difficult.
You can also try to reboot your phone in safe mode:
http://skp.samsungcsportal.com/integrated/popup/FaqDetailPopup3.jsp?cdsite=uk&seq=898277
http://androidjinn.com/boot-android-4-1-safe-mode.html
Click to expand...
Click to collapse
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
tys0n said:
Yeah, thats true. A working system is needed.
Just a question.. When you try to enter recovery (vol+/home/power), have you tried to keep pushing when it reboots?
Have you tried to connect usb in download mode (vol-/home/power) to see if Odin detects it?
Click to expand...
Click to collapse
Yeah, I keep pushing the buttons combo and it reboots again, it won't start to boot CM, just displays de Samsung logo and reboots. About the second question, I've tried connecting the computer while in Odin mode but it won't recognize it, I haven't tried with Odin itself open because my primary computer is a Macbook and don't have a PC with the Odin installed near to me all the time. Do you think it could recognize the device, despite the fact the whole PC doesnt?
Thanks!
Arrrroz said:
Whiteout a being able to synch to your computer or accessing recovery mode youre not gonna be able to restore your phone. Your best bet is buying a new micro usb cable (they are inexpensive) and restore using Odin.
Click to expand...
Click to collapse
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
unotresocho said:
Hi, I wish it'd be that easy! The problem is the pin entrance in the phone, not the cable. I have like 4 with me, but none of them works
Click to expand...
Click to collapse
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
I'm starting to thing you aint got a recovery at the moment. I've seen this type of thing before. Problem is, if you can't get odin to work you won't be able to solve it :/
Arrrroz said:
Oh, I see. You mention you could access odin mode, Im not familiar with it, but maybe it is possible that you could flash TWRP again, or CWR from the odin recovery? Also if you don't mind me asking, do you know how did the phone's pin got damaged?
Click to expand...
Click to collapse
I have no idea. I didn't fall or anything, it just stopped working one day. I thought it had to do with a "software" thing more than hardware, because I was using CM 10.1 and of course it wasn't official, it had bugs. I actually was trying to go back to CM10 to see if that was the problem but I got stuck here.
Hey everyone currently experiencing this semi-bricked as it still recognized on my pc, here's details situations i faced.. Running official V6 , it stuck & freeze on MI logo, i decided to power it off, ive checked the battery before that freeze was about 53%, after that the phone won't even power up no led, try to entering recovery (no luck), trying to access fastboot mode (no luck), downloading MiflashTool and reads every tutors&articles till now nothing work, i connected to pc redlight appeared for a while, i saw that installing driver (usb input installed), then i press the whole button (power+vol-up/down its installing driver (Qhsuab_dload installed) but no luck when try to flash it with miflashtool.. I really need some help to unbrick this devices, any help&suggestions would be appreciated. Thanks
I put some pictures so you guys know what am faces
Some pictures here
Hum wow, had you resized your partitions?
I should have a sugestion, but it may not please you...
Here it is : http://en.miui.com/thread-73348-1-1.html
But before trying it just wait for other replies.
Regards and good luck.
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
SH1M4BD3 said:
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
Click to expand...
Click to collapse
How about this?
How to Unbreak Xiaomi Mi 3 (soft break) - No need to open back cover -*http://en.miui.com/thread-84669-1-1.html
No luck broo fail..ok i sold..this crap
SH1M4BD3 said:
No luck broo fail..ok i sold..this crap
Click to expand...
Click to collapse
This CRAP haha had this happend to me it is a fully bricked phone u could fix it up by opening the phone and connecting some testpoints when flashing (tutorial on miui forum).
I sent it to repair as this same thing happend to me basically the "memory block" got bricked.
You know its just not make sense, i used it normally, not even yet try to root or flashing something, its fully stock, upgrading once..i used it about 2months normal use, but suddenly facing this, come on ..
Well this is what happend when I upgraded my version of MIUI through fastboot. Not sure how u got this but that is what it means as I had this too.
Latest update i always done was an ota stable one and am sure that was recovery way
Hi guys, this is my first time trying to flash a smartphone and i had no luck. After i press the power button nothing happens, only a small vibration and a little green led blink. :crying:
I'm trying to flash the stock ROM through Flashtool but my Xperia SP keeps disconnecting and connecting after a minute in Flash mode, the green light turn OFF for a second then ON again every minute. But if connected in Fastboot mode the device keeps connected normal but I cant select the .FTF file. I have no idea what to do now.
I bought it last year second hand its my first smartphone im broke as **** i cant believe its not working anymore. My last phone was a Nokia 5310 that i used until decomposition, literally. Sorry for bad english.
Please help.
share the instructions that you followed.
Did you root your phone and unlocked the bootloader, installed recovery ?
it is possible that your drivers are not properly installed, try using windows 7
I have similar issue but phone is not bricked it's charging really really slowly. And I don't know issue of it? If someone can link some room that don't have this issue that would be g8.