Hello
It is possible to unlock P smart z? After enter to Fastboot & rescue mode there is FRP Locked and Phone Locked. Phone is in boot loop and after Huawei logo enter to EMUI screen (wipe cache...etc). `Once was possible to download rom from Microsd, and after that phone was back to live , but have FRP lock. After next reboot phone stuck in loop... DC Phoenix didn't work wwitha that phone..
Related
I had recently tried to updated my p9-Eval19c185 to android 7 from b220 to b368 but the update failed, when i tried to rollback changed the phone stopped boot-looping and now only turns on and gets stuck on the boot logo.
I cant flash from sDcard dload file any more
Phone can only go into fastboot rescue mode
FRP and Phone locked and when i try to unlock oem using fastboot or erase frp, phone turns off immediately and boots to logo but still remains unlocked.
Any Help????? Fixes??rumors??
Sounds Illicit.
Dear Supporters,
I flashed Stock ZUI 1.9 on my ZUK Z2 Pro phone by using qfil. By mistake i select erase all option in qfill and after flashing i lost IMEI and MAC addresses. Luckly i have my EFS backup (QCN files). In order to restore my QCN i have to unlock my bootloader and install TWRP and Superuser. But i am facing issue and below mentioned are the scenarios i have so far tried.
Unlocking Bootloader and Installing TWRP with ZUI 1.9
Many time i have flashed Stock ZUI 1.9 and always my phone boots into below options screen (see 1.jpg);
0. SD update
1. Restore QCN
2. Save Param
3. Reboot
4. Shutdown
5. GetInfo
When i connect charger with switched off phone, it automatically switched on to same screen as mentioned above.
I have to long press power button and when second time ZUK logo (vibration) appears i release power button and phone boots in to Android OS. If i unlock my boot loader by using official way, my phone stuck on bootloader unlock screen (see 3.jpg).
Unlocking Bootloader and Installing TWRP with ZUI 3.5
I also try to unlock boot loader by using STOCK ZUI 3.5. But after update to ZUI 3.5 my phone boot into fastboot mode (see 2.jpg). In this fast boot mode i cannot scroll to menu but send fastboot commands.
I have to long press power button and when second time ZUK logo (vibration) appears i release power button and phone boots in to Android OS. If i unlock my boot loader my phone stuck on bootloader unlock warning screen (see 3.jpg).
Note:
1- Same behavior with ZUI 2.5, ZUI 2.3 if i try to unlock boot loader and install twrp
2- Just one time my phone boots in OS (ZUI 3.5) and and pass the unlock warning screen. Also just one time my phone boots to Twrp but sudden crashed and restart it self.
Any suggestion or solution to solve it.
Is there any way to solve this issue.
Thanks for help.
Solved: Zuk Z2 Pro Stuck in EDL 9008 mode and port auto connecting/disconnecting
I think i forget to attach JPGs
Did you solve it ?
Good evening, so here is my Huawei blocking the boot logo and I do not have access to recovery. I have access to fast mode, can you help me please, my bootloader is locked and I also saw that Huawei no longer gives unlock boot loader codes so what to do?
UP
Dude, why did you delete my reply? lol As I said, there isn't any solution.
The only solution was dc-unlocker or dc-phoenix but they said that my phone is gone. I had a refund too, because the knew this situation very well.
You have a device with locked bootloader and FRP, no TWRP, bootloop at Huawei logo, no recovery at all (talking about eRecovery this time) and the only thing that works is the Fastboot&Rescue Mode, but as I said, locked bootloader.
P8 Lite (2017): Retail Demo and "your device has been unlocked and can not be trusted
Hi @All
Few weeks ago i got a P8 Lite (2017) from my buddy.
The problem is that every boot has the annoying message "your device has been unlocked and can not be trusted" and then there are 2 options to choose from. If neither option is selected, the phone will start.
After it has started and you do not do anything for a short while, there is an equally annoying "promotional" procedure (Demo Mode, Retail Demo?)
Now Huawei is not really mine, Samsung already rather.
So how do I get the message after booting away and how this annoying retail mode away?
Huawei P8 Lite
Model: PRA-LX1
Build no. PRA-LX1C652B100
EMUI - 5.0
Android version 7.0
The found hint
1- Keep pressing power button to restart mobile
2. As soon as vibrate presses volume up button along with power button.
3- When huawei logo apear release power button and do not leave volume up button.
4- EMUI interface will be displayed
5- tap factory reset
6- When complete tap Wipe cache partician
7- Restart Mobile
- Done--
You are out of demo mode. Tested on Huawei P8 Lite
dont work.
I already tried.
The P8 Lite jumps immediately after the Huawei logo to the message "your device has been unlocked and can not be trusted"
I tried to flash the mobile with other firmware (e.g. german B140 firmware for P8 Lite) with SD Card and force update methode.
None of them is working, flashing fails at 5%.
I installed TRWP but i do not find a correct firmware.
Is there a step by step guide or is lineageos the solution?
Thanks and LG
Fastboot oem lock ?
Graveen said:
Fastboot oem lock ?
Click to expand...
Click to collapse
Thank you for the answer.
What do you mean exactly with Fastboot oem lock?
Zonk666 said:
Thank you for the answer.
What do you mean exactly with Fastboot oem lock?
Click to expand...
Click to collapse
this is the command that should relock your bootloader / frp and thus remove the warning message when you start your device.
You can simply, from a shell / command prompt:
adb reboot boatloader
(you will boot in fastboot mode)
fastboot lock oem
(you should relock the bootloader)
I think you will be forced to deploy a base rom (you should do this before relocking the BL) and all your datas will be wiped.
Perhaps into your rom, in developper options, you could relock the bootloader. Not sure as i never wanted to try this option
Hello, I had problems with my Sony Xperia XZ2, in past it didn't boot up, stuck on logo with Sony, I flashed a firmware with flash tool and after that it boot up, it worked but now, after 1 week it won't to unlock the screen with my password, after I enter my password ( it is a model password ) some theme or app crash I think and shows "com.sonymobile.runtimeskinning.common,,," and just ask again and again the password .
What can I do to do not lose data from it, it is very important for me ?
I tried to erase cache from fastboot but bootloader is locked and I can't.
Can I flash firmware in some way and repair this bug ?