Hi,
I'm trying to root the phone of a family member, but I got into a LOT of trubble.
According to the label behind the phone, it's SM-N9200, I attached the label without the IMEI.
After reading and learning, I decided to flash recovery and kernel inorder to root the phone.
1. So I flashed TWRP using odin based on this tutorial:
https://twrp.me/samsung/samsunggalaxynote5.html
I picked the version of: "China & China Duos (SM-N9200, SM-N9208)"
2. After flashing I got into recovery (without loading system), and flashed some kernel that should fit to this phone.
I picked the newest kernel in the forum:
https://forum.xda-developers.com/note5/development/kernel-samsung-galaxy-note-5-sm-n920-t3396722
But I think that this was a mistake, I don't know if this kernel fits to stock system.
The installation of the kerenl took ages (2-4 hours), the thing that took so long was the dealing with the system partition for the rooting.
3. Tried to boot into system, right in the start above the logo of samsung galaxy note5, I saw in red that the kernel is not seandroid enforcing.
But the system never booted, it just stuck in the black screen with the logo of samsung galaxy note5.
4. i tried another kerenl:
https://forum.xda-developers.com/note5/help/how-to-root-note-5-android-7-0-nougat-t3574986
But it didn't work and the phone is still it stuck in the black screen with the logo of samsung galaxy note5.
Now I don't know what to do...
I hope I didn't damaged the system and it's still recoverable.
I can't earse the phone, we want to recover all the data including all system.
Do you have any idea how can I resolve this?
Any idea?
Related
Hi friends,
My phone is currently stuck on Samsung logo screen. I have not done any new installation or flashing for the past 2 weeks. I had moved to power saving mode under settings (Jelly bean stock) two days back.
I'm currently on Germany Jellybean LSZ with the corresponding Phils kernel LSZ (this was all done two weeks back). What could be the issue? I realized the phone was in Samsung logo because the phone started heating up in my pocket. I immediately removed battery and tried restarting after 20 minutes. No luck.
I am able to go into Recovery and Download mode.
Please help me out.
Thanks a lot.
You can try:
1- Enter Philz's recovery with the proper keys combination and in advance section choose "reboot in recovery" (yes, again).
2- Once again in recovery choose "reboot now".
Some people tells that combination get pass samsung logo screen (I haven't tried for myself).
Regards.
tried your procedure but no luck. it does reboot into recovery from advanced. but then the reboot system is not happening.
while in recovery -
do data reset
wipe cache
then reboot ( you will have to set up your rom again )
AW: Phone stuck at Samsung logo screen.
Before you do anything else get the latest PhilZ kernel, transfer it to your sd card and flash it. It comes with a bootloop fix.
Sent from my revived Galaxy Note
Hi,
Okay so I have a Galaxy Ace S5830. It was rooted etc with no problems. I was just running the stock ROM (Koodo) that it came with.
Earlier I took a backup with CWM, then I used ODIN to flash a different ROM that I got from a different thread. However this ROM was not working well for me, the network connection kept winking in and out, so I wanted to go back to my stock ROM.
I got the stock firmware from SamFirmware using my model + country. I then used ODIN to flash the stock ROM.
When I boot after doing this, I go into a bootloop between the Koodo splash screen and the glowing SAMSUNG logo.
To hopefully remedy this, I used CWM to restore the backup I had taken previously.
However, when I boot after doing this, there is no loop, the phone simply sits at a screen with a black background that says Samsung GALAXY Ace GT-S5830D in white lettering. I have left it for a substantial amount of time and nothing changes.
I have read some other threads and they all suggest re-flashing stock rom with ODIN which I have done to the same result. So at this point the firmware will not fully boot, whether or not I have restored the backup.
Any help in fixing this will be appreciated! I'm stuck and I don't know what to do at this point, other than try some other firmwares.
Thanks!
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
frozenreddy said:
Update:
Thanks to ver3go I was able to get back to stock rom + factory settings. the bootloop issue has been resolved.
HOWEVER,
when I load from the backup I made with CWM, it freezes forever at the black + white samsung galaxy ace screen.
Any solutions would be great. Though it's not a huge issue, it would be nice to not have to re-install all my apps and reconfigure my phone
Click to expand...
Click to collapse
Before restoring your back up, do 3 the wipes and then restore your backup
I have a Note (GT-N7000) which has decided to no longer boot up completely. It is unrooted stock ROM. It manages to get bast the initial boot screen, but gets stuck on the SAMSUNG splash screen.
I can:
Boot into Recovery
Boot into Download Mode
Use ADB
see it in device manager as aMTP Device (although I can't see the actual device contents)
I have data (appdata, and files/documents)on it I need to get off, is there any hope?
It's my wifes phone, so some of you probably know how important this is!
Any help appreciated.
dartho said:
I have a Note (GT-N7000) which has decided to no longer boot up completely. It is unrooted stock ROM. It manages to get bast the initial boot screen, but gets stuck on the SAMSUNG splash screen.
I can:
Boot into Recovery
Boot into Download Mode
Use ADB
see it in device manager as aMTP Device (although I can't see the actual device contents)
I have data (appdata, and files/documents)on it I need to get off, is there any hope?
It's my wifes phone, so some of you probably know how important this is!
Any help appreciated.
Click to expand...
Click to collapse
From what I've read, I guessed I'm screwed, but was hoping there was something I missed. Look slike the phone will be relegated to a drawer in the hope that one day I can get data back. Look out Note 3! (or 4 if the budget can stretch)
Solved!
So, I ended up installing PhilZ-cwm6 - Safe Stock Based Kernel (http://forum.xda-developers.com/showthread.php?t=1901191) and could then boot into a custom recovery, mount USB and copy all the data off.
All good. Now to factory reset and see if phone comes back to us. Already got a new Note 4 to replace the old girl, so not a issue anymore.
Good day everyone.
I have a s6 stuck at logo and than go black. Recently I managed jailbreak my smg920f with successful result and I also successfully flash Nemesis custom rom using TWRP tools. For some reason I want to go back the old stock rom and using TWRP I flash back the backup. At the end TWRP warned me that it fail to restore a small portion from the backup but I continue restart the device, and it fail to boot, just appear samsung logo and go black. Anyone can help me?. By the way, sorry for bad English.
https://forum.xda-developers.com/galaxy-s6/help
And don't forget about the search function.
I have this phone, the thing that happened here is short, i proceed to explain.
I flashed a custom recovery, but for mistake i put the twrp from another device completly different, it was the one from another phone that i have (j2 prime), and when i noticed about it, it was so late, the phone restarted, and say the clasic red text "kernel is not seandroid enforcing" , but.....i wait for more than 5 minutes and the screen stay in the logo of samsung s6 edge plus....and nothing happened, i tryed to enter in recovery mode but it wont work, only works the download mode (lucky it wanst a hard brick), so i try flashing from the original firmware for the SM-G925I (version marshmellow, i think is 6.0.1) extracting the original recovery, then flash it, and the same happened, it wont start, i know if i flash the whole firmware again it will start, but im trying to save the data, cuz i have lots of pictures there....is anyway to fix this or extract the data (ofc the pc doesnt recognice the storage)...? Thanks.
p.d: if i was wrong posting here in the supersu forum , i apologize