I have been reading all sorts of threads for the past week on how to do this correctly. I think I got it down, just need some confirmation.
I got an international Note 8 SM-N950F 128GB.
I updated to the latest SW via the OTA - Baseband: N950FXXS4CRG6, Build Number: R16NW.N950FXXS4CRG6.
During Setup, I did not put in my SIM at all, I Logged in to the samsung and google accounts.
Waited 7 days and now have the OEM unlock option available.
I want to use the device on USA T-mobile, and root the device and install Xposed and Viper.
Can this be confirmed as the correct work flow?
I will be following Dr. Ketan's Guide to Root and Backup EFS. https://forum.xda-developers.com/galaxy-note-8/how-to/guide-how-to-root-note8-efs-backup-t3677038
1) Flash TWRP via Odin
2) Flash the OEM Unlock Fix, which should also install Magisk.
at this point, I shall boot into the Stock ROM and ensure the OEM Unlock is available, and Backup the EFS partition using the app from Dr. Ketan's post.
Question is: at this point, after backing up the EFS, I can flash a custom ROM, correct?
3) Backup EFS
4) Install Custom ROM.
- I am thinking https://forum.xda-developers.com/galaxy-note-8/development/rom-lightrom-t3768385
5) Flash the Tekhd Tmobile CSC Detonator https://forum.xda-developers.com/ga...ent/n8-s8x-s9x-oreo-t-mobile-efs-csc-t3772374.
A lot of Roms state they support Multiple CSC's. So, would this CSC Detonator be needed?
5) At what point in time Can I update Magisk or TWRP to the latest ones?
I just want to end some confusion I have. If you all on T-mobile can tell me the steps you took to get this working, I'd greatly appreciate it! Thanks for all your help.
nubie said:
5) Flash the Tekhd Tmobile CSC Detonator https://forum.xda-developers.com/ga...ent/n8-s8x-s9x-oreo-t-mobile-efs-csc-t3772374.
A lot of Roms state they support Multiple CSC's. So, would this CSC Detonator be needed?
Click to expand...
Click to collapse
hello,
any update from your effort to get volte ?
i think if you are on oreo, just need to flash the current detonator version for note 8 and see if it works. you can only use 1 CSC file (either multi or not) per phone.
mailistman said:
hello,
any update from your effort to get volte ?
i think if you are on oreo, just need to flash the current detonator version for note 8 and see if it works. you can only use 1 CSC file (either multi or not) per phone.
Click to expand...
Click to collapse
does this work to get wifi calling and volte?
I would like to do the same thing. thanks in advance.
Hi,
I'm having a problem flashing my N960N with a N960F.
So far, I've rooted my phone with twrp and installed magisk.
However, when I tried to flash my phone with stock firmware in Odin I would get a fail to re-repartition error.
Any help would be great.
Thank you
trannote9 said:
Hi,
I'm having a problem flashing my N960N with a N960F.
So far, I've rooted my phone with twrp and installed magisk.
However, when I tried to flash my phone with stock firmware in Odin I would get a fail to re-repartition error.
Any help would be great.
Thank you
Click to expand...
Click to collapse
you should use a custom rom and flash it throught twrp and not odin, use odin to flash official firmware.
in this case go to the note 9 roms forum and search for a rom that supports your model in this case its usually in the tittle N, even thought i read that you can flash the F rom to N model but i didnt try it, maybe some one can confirm this or not.
ubejd said:
you should use a custom rom and flash it throught twrp and not odin, use odin to flash official firmware.
in this case go to the note 9 roms forum and search for a rom that supports your model in this case its usually in the tittle N, even thought i read that you can flash the F rom to N model but i didnt try it, maybe some one can confirm this or not.
Click to expand...
Click to collapse
Thanks for reply, I've been trying to flash my phone with official firmware using Odin from N960N to N960F BTU (United Kingdom). I don't want to use custom rom.
then you are trying for nothing and it will never work. worst comes to worst you might brick.
bober10113 said:
then you are trying for nothing and it will never work. worst comes to worst you might brick.
Click to expand...
Click to collapse
Thanks
trannote9 said:
Thanks for reply, I've been trying to flash my phone with official firmware using Odin from N960N to N960F BTU (United Kingdom). I don't want to use custom rom.
Click to expand...
Click to collapse
You shouldn't have any issues installing the N960F BTU OS onto your N960N as they are basically the same device and run on the same hardware specs. They even run on the same LTE bands...
iceepyon said:
You shouldn't have any issues installing the N960F BTU OS onto your N960N as they are basically the same device and run on the same hardware specs. They even run on the same LTE bands...
Click to expand...
Click to collapse
It doesn’t install even tho it’s the same device. Odin throw some error repartitioning
So after a bit of research it looks like it is not possible to flash stock att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Noteuser22 said:
So after a bit of research it looks like it is not possible to flash stock att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Click to expand...
Click to collapse
Not officially, no. However I don't think samsung pay will work in the US on a Korean Note9 anyway, so if you unlock the bootloader and root you can flash a CSC changer to get all of the ATNT features (including voLTE/voWIFI). You will void your warranty and lose knox/Samsung Pay.
Noteuser22 said:
So after a bit of research it looks like it is not possible to flash stocksevice. att firmware to the n-960n. Does this sound right. I'm leaving Korea and will be going back to att when I get home.
Click to expand...
Click to collapse
you can't flash snapdragon firmware on a exynos device. but regardless, just pop the sim and be happy. no need to change CSC for voice and data.
but if you do root as the suggested then you can get the additional csc features by flashing a csc pack.
bober10113 said:
you can't flash snapdragon firmware on a exynos device. but regardless, just pop the sim and be happy. no need to change CSC for voice and data.
but if you do root as the suggested then you can get the additional csc features by flashing a csc pack.
Click to expand...
Click to collapse
Exactly which CSC pack can I use and where do I get it?
I am in the exact same situation: Korean SM-G960N, rooted, on AT&T's network with Android 9.
Do I extract the CSC from the latest SM-G960U1 file and flash that with Odin? Can I use an Android 10 CSC on an Android 9 phone?
sleepeeg3 said:
Exactly which CSC pack can I use and where do I get it?
I am in the exact same situation: Korean SM-G960N, rooted, on AT&T's network with Android 9.
Do I extract the CSC from the latest SM-G960U1 file and flash that with Odin? Can I use an Android 10 CSC on an Android 9 phone?
Click to expand...
Click to collapse
Are you looking for AT&T specifically? Cause from what I know they don't release them. I used N960U since the 1 is the unlocked version software. Sorry I can't be much help beyond what I know of AT&T files. Best of luck.
macgyver40 said:
Are you looking for AT&T specifically? Cause from what I know they don't release them. I used N960U since the 1 is the unlocked version software. Sorry I can't be much help beyond what I know of AT&T files. Best of luck.
Click to expand...
Click to collapse
Thanks for the respopnse. Well the link from SamMobile has the CSC in it. I tried to flash the HOME_CSC file via Odin and the Odin PrinceComsy version (I don't think this works on Android 8) and it would not flash.
sleepeeg3 said:
Thanks for the respopnse. Well the link from SamMobile has the CSC in it. I tried to flash the HOME_CSC file via Odin and the Odin PrinceComsy version (I don't think this works on Android 8) and it would not flash.
Click to expand...
Click to collapse
The last 2 times I updated I used the Comcast files to update my note9 i got from AT&T i am currently on the newest release this way and everything seems to work at least the limited options I use from AT&T.
no update samsung Note 9 AT&T unlocked phone in another region without AT&T sim card
Hello everyone i've been really struggling with updating my phone that i got pre-owned It's a Samsung Galaxy Note 9 (SM-N960U) and I have not recieved updates since I got it the phone is still on Android version 8.1.0 and security patch from 2018 so i've been really wanting to update it to the latest version but I couldn't and i figured out that phones from AT&T only update via their own app or OTA thing anyway I thought of flashing it with a stock firmware VIA ODIN but i checked on sammobile that the note 9 AT&T csc only has 1 update and thats 8.1.0 also so i was wondering if i can use some other firmware to flash it or do i change csc? would that work if i changed the csc or am i gonna have baseband and signal issues? I tried KIES it said it didnt recognize my phone probably because the software version has never been updated and very old , i wanted to flash it to a different CSC than AT&T but i dont think thats a good idea, please help
ep1kku said:
Hello everyone i've been really struggling with updating my phone that i got pre-owned It's a Samsung Galaxy Note 9 (SM-N960U) and I have not recieved updates since I got it the phone is still on Android version 8.1.0 and security patch from 2018 so i've been really wanting to update it to the latest version but I couldn't and i figured out that phones from AT&T only update via their own app or OTA thing anyway I thought of flashing it with a stock firmware VIA ODIN but i checked on sammobile that the note 9 AT&T csc only has 1 update and thats 8.1.0 also so i was wondering if i can use some other firmware to flash it or do i change csc? would that work if i changed the csc or am i gonna have baseband and signal issues? I tried KIES it said it didnt recognize my phone probably because the software version has never been updated and very old , i wanted to flash it to a different CSC than AT&T but i dont think thats a good idea, please help
Click to expand...
Click to collapse
Kies is for older Samsung devices, Smart Switch is for newer Samsung devices.
Here is a list of firmware at Sammobile that has android 10 for your device. They are for T-mobile but I'm pretty sure it can be used on the AT&T Note 9.
https://www.sammobile.com/samsung/galaxy-note9/firmware/sm-n960u/tmb/
Here is a thread for AT&T note 9 where another user flashed their Note 9 with firmware from another carrier. Use the T-Mobile firmware and follow the steps from post #4 of the thread linked below.
https://forum.xda-developers.com/galaxy-note-9/help/please-help-flashing-att-n960u-firmware-t4107287
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Kies is for older Samsung devices, Smart Switch is for newer Samsung devices.
Here is a list of firmware at Sammobile that has android 10 for your device. They are for T-mobile but I'm pretty sure it can be used on the AT&T Note 9.
https://www.sammobile.com/samsung/galaxy-note9/firmware/sm-n960u/tmb/
Here is a thread for AT&T note 9 where another user flashed their Note 9 with firmware from another carrier. Use the T-Mobile firmware and follow the steps from post #4 of the thread linked below.
https://forum.xda-developers.com/galaxy-note-9/help/please-help-flashing-att-n960u-firmware-t4107287
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
hey thanks for replying so basically i can flash my phone to any other csc because it's unlocked correct? i live in Saudi Arabia so is the reception or whatever gonna get messed up by chance if i flash to something other than AT&T? thanks again.
ep1kku said:
hey thanks for replying so basically i can flash my phone to any other csc because it's unlocked correct? i live in Saudi Arabia so is the reception or whatever gonna get messed up by chance if i flash to something other than AT&T? thanks again.
Click to expand...
Click to collapse
Read post #4 of the thread that I linked, it will tell you everything you need to know.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
Read post #4 of the thread that I linked, it will tell you everything you need to know.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
yeah but my phone is sm-n960u not sm-n960u1 what should i be changing in the methods?
ep1kku said:
yeah but my phone is sm-n960u not sm-n960u1 what should i be changing in the methods?
Click to expand...
Click to collapse
So, all the SM960U devices are the same. Just flash the T-Mobile firmware.
Sent from my SM-S767VL using Tapatalk
Droidriven said:
So, all the SM960U devices are the same. Just flash the T-Mobile firmware.
Sent from my SM-S767VL using Tapatalk
Click to expand...
Click to collapse
oh alright, tyvm im gonna go through with it and update you how it goes, ty for the help and response :highfive:
Hello people, having exactly the same problem, so its a SM-N960U phone, unlocked from AT&T. First to say, im not in the US, dont have AT&T sim, the phone is updated to android 10 with 2.0ui, with baseband ver. N960USQS3DTB1.
Now somewhere i read that bootloader must be unlocked in order even to begin thinking of flashind the device, dont know how accurate that is... Id like to ask the Owner of the post, if he was able to make it, to update his firmware. And if so did he indeed succeded from the link above from ep1kku ?
Denis95M said:
Hello people, having exactly the same problem, so its a SM-N960U phone, unlocked from AT&T. First to say, im not in the US, dont have AT&T sim, the phone is updated to android 10 with 2.0ui, with baseband ver. N960USQS3DTB1.
Now somewhere i read that bootloader must be unlocked in order even to begin thinking of flashind the device, dont know how accurate that is... Id like to ask the Owner of the post, if he was able to make it, to update his firmware. And if so did he indeed succeded from the link above from ep1kku ?
Click to expand...
Click to collapse
No, the bootloader does not need to be unlocked before flashing if you are flashing stock software, unlocked bootloader is required to flash custom software, not stock software. There are some manufacturers that require unlocking bootloader even when flashing stock software but Samsung is not and probably never will be one of them.
You can flash your device with stock firmware any time you want, provided that the firmware is not a firmware that is older than your currently installed firmware and if the firmware is for your model number or an equivalent variant of your device with a similar model number and the same CPU series.
Droidriven said:
No, the bootloader does not need to be unlocked before flashing if you are flashing stock software, unlocked bootloader is required to flash custom software, not stock software.
You can flash your device with stock firmware any time you want, provided that the firmware is not a firmware that is older than your currently installed firmware and if the firmware is for your model number or an equivalent variant of your device with a similar model number and the same CPU series.
Click to expand...
Click to collapse
Wow didn't know that, well how to find out if the firmware on my device is stock or not, im trying to flash for a week now, odin keeps giving me error ... All threads succed 0/1 no idea whats up with that
Denis95M said:
Wow didn't know that, well how to find out if the firmware on my device is stock or not, im trying to flash for a week now, odin keeps giving me error ... All threads succed 0/1 no idea whats up with that
Click to expand...
Click to collapse
You can boot into download mode and it should say whether the firmware is "official" or "custom".
As I said, you can flash stock firmware provided that the firmware that you are flashing is not older than your current firmware, you can't downgrade the firmware, you can only flash an equivalent firmware to what is already on the device or a newer, updated firmware. Your error may be due to this. For all Samsung firmware, the 5th character from the right in the build number is referred to as the binary version. Your currently installed firmware has a "3" for the binary version, this means you can only flash a firmware that also has a binary 3 or you can flash a firmware that has a number higher than 3 but you can not flash a firmware that has a binary that is lower than 3(you can not flash a binary 1 or 2 firmware).
Depending on the specific error that you got, this could be your issue. What was the specific error that you got?
Droidriven said:
You can boot into download mode and it should say whether the firmware is "official" or "custom".
As I said, you can flash stock firmware provided that the firmware that you are flashing is not older than your current firmware, you can't downgrade the firmware, you can only flash an equivalent firmware to what is already on the device or a newer, updated firmware. Your error may be due to this. For all Samsung firmware, the 5th character from the right in the build number is referred to as the binary version. Your currently installed firmware has a "3" for the binary version, this means you can only flash a firmware that also has a binary 3 or you can flash a firmware that has a number higher than 3 but you can not flash a firmware that has a binary that is lower than 3(you can not flash a binary 1 or 2 firmware).
Depending on the specific error that you got, this could be your issue. What was the specific error that you got?
Click to expand...
Click to collapse
I got you, well iv got into download mode many times, its say official, so in theory i can flash official release right, but keeps ending with that odin error, no idea ... Could it be because im in different region than the device's market, its a US market phone like i said, in from europe
Denis95M said:
I got you, well iv got into download mode many times, its say official, so in theory i can flash official release right, but keeps ending with that odin error, no idea ... Could it be because im in different region than the device's market, its a US market phone like i said, in from europe
Click to expand...
Click to collapse
When using Odin, in the box that shows the flashing process, it should say exactly which error you are getting. When I asked what error you are getting, I was not asking "why" you are getting the error, I'm asking what it says in that box. Post the exact name of the error. Try to flash the device, while it is flashing, watch the dialog box in Odin, when it gives the error, take note of exactly what the error is, you can scroll up and down within the box and read all of the output data in that field.
Yes, it could be due to being from a different region but I doubt it. It could also be because your device is a Snapdragon version but the firmware that you are trying to flash could be for a Exynos version instead, or vice versa.
Droidriven said:
When using Odin, in the box that shows the flashing process, it should say exactly which error you are getting. When I asked what error you are getting, I was not asking "why" you are getting the error, I'm asking what it says in that box. Post the exact name of the error. Try to flash the device, while it is flashing, watch the dialog box in Odin, when it gives the error, take note of exactly what the error is, you can scroll up and down within the box and read all of the output data in that field.
Yes, it could be due to being from a different region but I doubt it. It could also be because your device is a Snapdragon version but the firmware that you are trying to flash could be for a Exynos version instead, or vice versa.
Click to expand...
Click to collapse
Yes i know that i cant downgrade, well all software that i attempt to flash is downloaded from sammobile, my binary is v3, but one problem, all at&t release for that model is the original one, with android 8.1 ... So i try U1 model still didn't work, my software is official, says in download mode
Denis95M said:
Yes i know that i cant downgrade, well all software that i attempt to flash is downloaded from sammobile, my binary is v3, but one problem, all at&t release for that model is the original one, with android 8.1 ... So i try U1 model still didn't work, my software is official, says in download mode
Click to expand...
Click to collapse
You still aren't telling me the SPECIFIC error that you are getting in the dialog box in Odin. That has been the most important question to understand your issue but you keep dodging it. Flash the firmware, watch for the error, take note of exactly what error it says it is, then post exactly what it says the error is. If you can't post that then there is no point in replying.
If you are trying to flash the device in a different region, you may not need to flash the whole firmware from the different region, you may be able to flash just the modem.img from the alternative firmware. To do this, extract the firmware, find the modem.img then convert that modem.img into an Odin flashable .tar using 7zip with its highest level of compression, then flash the modem.img.tar via Odin.
Droidriven said:
You still aren't telling me the SPECIFIC error that you are getting in the dialog box in Odin. That has been the most important question to understand your issue but you keep dodging it. Flash the firmware, watch for the error, take note of exactly what error it says it is, then post exactly what it says the error is.
Click to expand...
Click to collapse
Sorry rigth in posting screen shot of the error.
Denis95M said:
Sorry rigth in posting screen shot of the error.
Click to expand...
Click to collapse
I added to my previous post.
Strange, your screenshot doesn't show an error, it just stops without giving an error.
I'm assuming that your firmware came in multiple parts with some CSC files? If so, try flashing without using the CSC files.
Droidriven said:
I added to my previous post.
Strange, your screenshot doesn't show an error, it just stops without giving an error.
I'm assuming that your firmware came in multiple parts with some CSC files? If so, try flashing without using the CSC files.
Click to expand...
Click to collapse
Right tonight i will try when I'm home, could it be thoug because of wrong firmware ?
Denis95M said:
Right tonight i will try when I'm home, could it be thoug because of wrong firmware ?
Click to expand...
Click to collapse
Give me a link to the firmware that you downloaded and I'll compare to see if it is supposed to work.
Droidriven said:
Give me a link to the firmware that you downloaded and I'll compare to see if it is supposed to work.
Click to expand...
Click to collapse
Alright, https://www.sammobile.com/samsung/galaxy-note9/firmware/#SM-N960U this is without the carrier, if you put at&t in search menu, you will see that only 1 is available, with android 8.1
So i tried U1, version at&t https://www.sammobile.com/samsung/galaxy-note9/firmware/SM-N960U1/ATT/#SM-N960U1 also didn't work, i tried T-mobile on same U1 model, also didn't work. Everytime same error/none error like on the screen shot
Hi all, I'm new to modding in general so there's many things I don't quite understand, hoping somebody can help.
I bought an S10 from a site which was supposed to just send me a refurbed (italian) S10, instead they sent me the US version, (G973U) and I believe it is carrier locked since it's stuck with Android 9 and doesn't find any update.
I have tried searching to no avail what I should flash to simply unbrand it, and allow it to receive OTA updates without tripping Knox.
The build version is the following: PPR1.180610.011.G973USQU2ASGC and the CRC is XAA/XAA/ATT
Thanks in advance.
You shall call them.
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
CSC (not CRC).
XAA is a multi-region USA ROM, so I don't think it will change over properly for you in Italy. There are threads here for how you reflash a different ROM. The one I used for my S10+ was this one: https://forum.xda-developers.com/t/...e-links-and-flashing-discussion-here.3905897/ but I am sure there is one like that for your S10 non-plus... find it, follow the instructions, and you should be all set.
Thanks! I'm a newbie, what does it mean it wouldn't change properly? No OTAs? Tripping KNOX?
I have found this which seems to be the equivalent of the link you posted.
So, I should flash the U1 version right? However I see only a file "SAU - 1 - ....", and my build number doesn't end in that, furthermore I don't know which bootloader version I'm at.
lrzfc said:
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
Click to expand...
Click to collapse
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
FardinIslam said:
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
Click to expand...
Click to collapse
No problem. I'm aware of the mode I have to enter to flash, as above I'm trying to figure out which stock rom I should flash to avoid tripping knox, and to receive OTAs. What won't work seamlessly?
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Watch this video
lrzfc said:
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Click to expand...
Click to collapse
Hello, I'm in more or less same situation. When you flashed, which files did you use? All of them or just the AP_*** file?
Never mind. Flashed it anyway, now I don't see the AT&T startup screen anymore which is promising. Firmware version is now Android 11 (SM-G973U1 and not SM-G973U) on XAA CSC. Will see if I get any firmware updates later.