Hello all,
I did some searching here on XDA and on the internet regarding the flashing but I was unable to find any definitive answer to this so maybe someone here can help me out, here goes:
As far as I'm aware, Xiaomi does not provide a source code for their drivers (firmware) which means we need to use precompiled binaries for specific android versions, downloadable for example here:
https://forum.xda-developers.com/k2...mware-xiaomi-mi-9t-pro-redmi-k20-pro-t3955317
What I don't exactly understand is how can one go about installing a custom ROM (e.g LineageOS) and drivers in case there is a difference between Android versions when flashing a ROM (e.g going from Android 9 based MIUI 10 to Android 10 based LineageOS 17)
Most of the how-to's I found on installing a custom ROM specify that I should update to MIUI 11 (Android 10) first before installing LineageOS 17 so the firmware is up to date and working but I would like to avoid this due to Xiaomi's anti-rollback "feature" (fastboot getvar anti) which will then prevent me from installing back MIUI 10 (in case I might want to roll back)
Does anyone know how/where is the firmware stored exactly? As I understand, the firmware is installed via TWRP therefore I believe it's stored somewhere on filesystem, do I need to flash the firmware/ROM in specific order when flashing a new ROM via TWRP (ROM first, then firmware)?
For now, I came up with these steps:
1. Unlock bootloader - already done
2. Install TWRP
3. Flash custom ROM (Android 10 / LineageOS 17)
4. Flash Firmware (Extracted from Android 10 / MIUI 11)
5. Wipe data/dalvik/etc. + install gapps/magisk/etc.
6. Reboot
Will this work?
Thanks a bunch!
our phone doesn't have anti-rollback. Source: xiaomi.eu
my guide: bit.do/raphaelguide
I'd advise updating the firmware of stock miui, so you are up-to-date normally. The firmware is located in the vendor. the vendor and firmware files are combined. (links in my guide as well.
Updating to an AOSP rom from miui is also in my guide.
Hello there, I have bought an Xiaomi Mi 9t pro in Germany 2 Days ago.
The guy who used it before had unlocked the Bootloader and installed the TWRP. This is working great and I've got no Problem with that.
He Also installed another ROM. In The beginning there was the Original EEA Rom. Now it is runnning with "MIUI 11 | V11.0.5.0QFKCNXM|(stable)".
He said this ROM is the original Global ROM from China and because of that the Phone identifys as Redmi K20 Pro. I've got no Problem with that, because I know These are the same phones. But my Question is: What is the difference between these two ROM's and does it make sense to use the ROM witch is installed already? Because actually i wanted to test the phone with the original ROM. And where can I find the actuall original ROM?
Thanks a bunch!
duma218 said:
Hello there, I have bought an Xiaomi Mi 9t pro in Germany 2 Days ago.
The guy who used it before had unlocked the Bootloader and installed the TWRP. This is working great and I've got no Problem with that.
He Also installed another ROM. In The beginning there was the Original EEA Rom. Now it is runnning with "MIUI 11 | V11.0.5.0QFKCNXM|(stable)".
He said this ROM is the original Global ROM from China and because of that the Phone identifys as Redmi K20 Pro. I've got no Problem with that, because I know These are the same phones. But my Question is: What is the difference between these two ROM's and does it make sense to use the ROM witch is installed already? Because actually i wanted to test the phone with the original ROM. And where can I find the actuall original ROM?
Thanks a bunch!
Click to expand...
Click to collapse
Your phone now has the Chinese ROM, not global.
The Chinese ROM is not so good for use outside of China.
You would be better using the latest EEA ROM, which you can download from here
http://bigota.d.miui.com/V11.0.3.0....EUXM_20191029.0000.00_10.0_eea_80e1c5de81.tgz
This is a fastboot ROM and needs to be flashed in fastboot mode, not with TWRP.
There are plenty of guides here on flashing a fastboot ROM, just be careful not to re-lock the bootloader.
Thank you for the fast answer. I will try to install the original ROM as fast as i can find a good guide on how to install via fastboot .
Can you please tell me whats the difference in the methods of installing a ROM via fastboot or TWRP? Up to now I always worked with TWRP. But this is my first Xiaomi device.
And why the bootloader should be re-locked when I'm installing the ROM? And is there any problem with re-locking the bootloader?
duma218 said:
Thank you for the fast answer. I will try to install the original ROM as fast as i can find a good guide on how to install via fastboot .
Can you please tell me whats the difference in the methods of installing a ROM via fastboot or TWRP? Up to now I always worked with TWRP. But this is my first Xiaomi device.
And why the bootloader should be re-locked when I'm installing the ROM? And is there any problem with re-locking the bootloader?
Click to expand...
Click to collapse
Xiaomi release 2 ROMs for each version, a recovery ROM and a fastboot ROM.
The recovery ROM is a standard ROM that is flashed via recovery, i.e. TWRP. Fastboot ROMs are more for recovering a soft bricked phone. They include most of the phones partition images, not just the system image. When changing to a different region ROM, you need to flash a fastboot ROM, not the recovery ROM.
Flashing fastboot ROMs is normally done with the Mi Flash Tool. The tool defaults to flash and lock the bootloader. You need to manually change the flash option from the default to flash only option (called 'clean all' in the tool)
It is only possible to re-lock the bootloader when you are flashing a ROM that is for the original region of the phone, if you try and lock the bootloader when flashing a ROM for a different region, it will brick the phone.
Because you've bought the phone second hand, and the seller already lied about the Chinese ROM being global, then there is no guarantee that the phone is a genuine European model, so it is best to play safe and not re-lock the bootloader when flashing the EEA ROM.
Robbo.5000 said:
Xiaomi release 2 ROMs for each version, a recovery ROM and a fastboot ROM.
The recovery ROM is a standard ROM that is flashed via recovery, i.e. TWRP. Fastboot ROMs are more for recovering a soft bricked phone. They include most of the phones partition images, not just the system image. When changing to a different region ROM, you need to flash a fastboot ROM, not the recovery ROM.
Flashing fastboot ROMs is normally done with the Mi Flash Tool. The tool defaults to flash and lock the bootloader. You need to manually change the flash option from the default to flash only option (called 'clean all' in the tool)
It is only possible to re-lock the bootloader when you are flashing a ROM that is for the original region of the phone, if you try and lock the bootloader when flashing a ROM for a different region, it will brick the phone.
Because you've bought the phone second hand, and the seller already lied about the Chinese ROM being global, then there is no guarantee that the phone is a genuine European model, so it is best to play safe and not re-lock the bootloader when flashing the EEA ROM.
Click to expand...
Click to collapse
Thank you for this great description. I will try top flash the european ROM this weekend. After everything works succesfull i will write here .
Only one more question.. flashing the original ROM with re-locking the Phone will deinstall TWRP and install an original bootloader?
duma218 said:
Thank you for this great description. I will try top flash the european ROM this weekend. After everything works succesfull i will write here .
Only one more question.. flashing the original ROM with re-locking the Phone will deinstall TWRP and install an original bootloader?
Click to expand...
Click to collapse
Yes.
costorektypico said:
Yes.
Click to expand...
Click to collapse
So now I flashed it by fastboot and its running. I had to watch some videos an dread some sides to understand what to do to make the Mi Flash tool run. But all in all its not that complicated as i thought.
When I start the phone its still unlocked, but i think there is no TWRP anymore. Thats not that important for me now. But I'm missing some Features witch were in the chinese ROM already. For example the App drawer. I Thougt it would be normal to have one because up to now i only had Phones with it :/. I've read it will come with some extra updates, and i hope it will come soon.
Thank you for your help. I hope i will accustom myself to use the phone without the app drawer.
Related
Hi everyone
First, I didn't find an answer form my question via search. Sorry if there is already one.
I'm now with an Global Mi 8 with Global ROM MIUI 9 9.6 (9.6.4.0 (OEAMIFD) and locked Bootloader. That's how my MI 8 got out of the box (so, the official Global version).
I want to flash the Gloabl Developer ROM 8.8.30 from the official MIUI Homepage (http://en.miui.com/download-346.html). As there is also a ZIP ROM Version for flashing via Recovery I want to ask wether it's safe to flash this. The verification process said no problems, just that all Data is erased. This is ok.
Is it safe to flash this way or is there a danger for a brick if the Bootloader is not unlocked?
sthoeft said:
Hi everyone
First, I didn't find an answer form my question via search. Sorry if there is already one.
I'm now with an Global Mi 8 with Global ROM MIUI 9 9.6 (9.6.4.0 (OEAMIFD) and locked Bootloader. That's how my MI 8 got out of the box (so, the official Global version).
I want to flash the Gloabl Developer ROM 8.8.30 from the official MIUI Homepage (http://en.miui.com/download-346.html). As there is also a ZIP ROM Version for flashing via Recovery I want to ask wether it's safe to flash this. The verification process said no problems, just that all Data is erased. This is ok.
Is it safe to flash this way or is there a danger for a brick if the Bootloader is not unlocked?
Click to expand...
Click to collapse
It's safe to switch from global stable to global beta rom thru the updater, it won't brick your device.
Sent from my MI 8 using Tapatalk
Hello,
I was in your case with the same version.
No problem for me, I downloaded the version like you via the link then going through system update of the phone.
My bootloader is not unlocked
I'm currently on China Stable (miui9), bootloader isn't unlocked yet, what would happen if I flash globlal beta rom (miui10) (zip) via updater recovery?
It worked. Thanks
3597dxta said:
I'm currently on China Stable (miui9), bootloader isn't unlocked yet, what would happen if I flash globlal beta rom (miui10) (zip) via updater recovery?
Click to expand...
Click to collapse
If your device is Chinese, you gonna brick it without unlocked bootloader.
So unlock it, flash then stay unlocked.
Is it possible to downgrade from 10 beta to stable 9 with recovery rom?
For the people who did. Did it erase everything on the phone? I am thinking of trying miui 10 but am too lazy to re-setup everything
cryptonx said:
For the people who did. Did it erase everything on the phone? I am thinking of trying miui 10 but am too lazy to re-setup everything
Click to expand...
Click to collapse
Yes, it erases everything, back up all your data first, and save it on your computer
Hello,
I would like to flash Global Beta Rom on Global Stable rom thru adapter, but after touch 3 dots I do not have opportunity to choose the zip.
Do you have any suggestions how to do it?
Hello.
Click 10 times on the miui10 logo and submenu will appear.
Have fun
Thanks, it works :good:
Lol wrong thread
Hello guys,
I buy k20 pro, I think its a China version. And i have two problems with this rom(Global 9.5.31 Beta), i dont know what i need do now.
First problem:
Reboots from nothing, sometimes the phone reboots when i use the finger for unlook.
Second problem:
Network(4G) stops to work from nothing and i need reboot for back to work again.
If I need change the rom, what rom i can use for this version? Its easy to change?
Sorry for my english, i dont speak well. Thanks
K20Pro doesn't have any Global beta rom, so your device came with a fake rom. What you need to do is to flash official rom via fastboot. Careful to select only "clean all" option for fastboot flash. Locking the bootloader may brick your device.
kibria.mgk said:
K20Pro doesn't have any Global beta rom, so your device came with a fake rom. What you need to do is to flash official rom via fastboot. Careful to select only "clean all" option for fastboot flash. Locking the bootloader may brick your device.
Click to expand...
Click to collapse
Where i can download this official rom for my phone and have some problem because its china version?
Thanks for your help.
Tagales said:
Where i can download this official rom for my phone and have some problem because its china version?
Thanks for your help.
Click to expand...
Click to collapse
The Official Rom for your phone is China Rom. You can download it from MIUI China Forum. However, incase you need Google Apps, you’ll need the 9T Pro Global rom which works just fine on K20 Pro as more or leas they are siblings. Here’s the fastboot link for Global rom. Flash it via Mi Flash and choose the options carefully in the tool. Locking the bootloader would hard brick your device.
http://bigota.d.miui.com/V10.3.1.0....XM_20190805.0000.00_9.0_global_135788d537.tgz
Remember if you flash the china rom, you can lock bootloader, there wont be any issues. But if you choose to flash global/eu/india rom, locking bootloader will brick your device. So choose "clean all" in the flash tool.
Hi All
Pulled the trigger last night and ordered a 256GB 11 Ultra from Wonda. The wait for the next couple of weeks will be painful haha.
This will be the first Xiaomi I've used having previously used Samsung and Oneplus etc. How easy is it to flash the EU rom? Does it need to be rooted or unlocked BL first?
Thanks
Hi, many explication here
[GUIDE][venus|star|mars] How to install Xiaomi.eu ROM for Xiaomi MI11 / Pro / Ultra
How to install Xiaomi.eu ROM for Xiaomi MI 11 / Pro / Ultra -----------EDIT 20.5.2021-------------- Since weekly 21.5.20 and Stable 12.5.7.0, we are releasing TWRP version of our ROMs for MI11, MI11Pro/Ultra.. TWRP install via fastboot command fastboot boot twrp.img To change TWRP language...
xiaomi.eu
more than to wait for your version
Guitarfreak26 said:
Hi All
Pulled the trigger last night and ordered a 256GB 11 Ultra from Wonda. The wait for the next couple of weeks will be painful haha.
This will be the first Xiaomi I've used having previously used Samsung and Oneplus etc. How easy is it to flash the EU rom? Does it need to be rooted or unlocked BL first?
Thanks
Click to expand...
Click to collapse
Xiaomi phones are allowed to have their bootloaders to be unlocked and welcome custom ROMs. There is one previso, you have to wait a week ( 168 hours). You must agree and fully bond your phone with your Xiaomi account first. Then using the online or mi unlock tool you start the process. Once successfully started, you wait a week and then go back to the online or tool and actually do the unlock. This reboots your phone and formats the data, so have an off phone back up or data source.
Once unlocked, you can install custom ROMs like the EU ROM, which I will use when Available. 2 methods of flashing custom ROMs, fastboot via a PC or TWRP recovery. When a TWRP recovery is available, this is the easiest method but as this tends to be a while after the phones release, you tend to have to update by pc and fastboot for a while. To replace stock recovery with TWRP recovery, you again use a pc and fastboot the TWRP over your stock recovery and then boot direct to it and flash a TWRP .zip ROM when available. Of course you don't need to format each update, only if you change ROM branches. The EU ROM has a stable and both weekly ROM versions. Both are based on stock Chinese but made more like a global ROM. Their ROMs are the best choice if you want a good custom ROM based still in Xiaomi miui system.
You don't need to root to do any of the above. If you want to see my guide I wrote when the 10 Ultra was released, take a look at my guide here... https://mega.nz/file/fIoWUD4a#q1S3wYoOltgaPcchAiXc3dHal7Sf31k5BZQBM4xy6NE
It takes you through ensuring your phone is bonded with your Xiaomi account, unlocking, flashing by fastboot, installing TWRP, flashing by TWRP, updating and changing ROM branches. I will release a 11 Ultra version later this month when mine arrives but it should be no different in process.
Just don't expect kernel sources to be released complete...
But after changing to the global rom, will it update automatically?
Or do we have to do it manually?
BooBoo_el_Locco said:
But after changing to the global rom, will it update automatically?
Or do we have to do it manually?
Click to expand...
Click to collapse
You need to do it manually with the batch file. As long as there is no TWRP for that model OTA will not work unfortuantely.
RoughNeck1971 said:
You need to do it manually with the batch file. As long as there is no TWRP for that model OTA will not work unfortuantely.
Click to expand...
Click to collapse
Thank you for the replay. Thats is the only reason i will have to wait for the global variant.
Thought I read it someone if one flashes stock eu rom over China rom using mi flash too jar... you can lock bootloader back and it will receive OTA.
Is this information wrong ?
On
eijnaix said:
Thought I read it someone if one flashes stock eu rom over China rom using mi flash too jar... you can lock bootloader back and it will receive OTA.
Is this information wrong ?
Click to expand...
Click to collapse
On Sony Devices you can. I believe on xiaomi it wil brick and you need EDL
Guys someone successfully flashed Global rom on CN version phone ?
Hi guys,
i flashed tons of roms since i got my phone. Now i want to revert back to miui 10 android 9 ~v10.3.17 - xiaomi.eu, as miui 10 always was best with battery life for me.
Should i first flash the official stock rom from c.mi.com with fastboot mi flash tool to get rid of all my mess i have done in those years or can i just flash xiaomi.eu via twrp ?
I have the chinese version redmi k20 pro 8gb 128gb raphael.
Thanks.
Danny94 said:
Hi guys,
i flashed tons of roms since i got my phone. Now i want to revert back to miui 10 android 9 ~v10.3.17 - xiaomi.eu, as miui 10 always was best with battery life for me.
Should i first flash the official stock rom from c.mi.com with fastboot mi flash tool to get rid of all my mess i have done in those years or can i just flash xiaomi.eu via twrp ?
I have the chinese version redmi k20 pro 8gb 128gb raphael.
Thanks.
Click to expand...
Click to collapse
Flashing Xiaomi.eu will only replace the system. It's probably better that you first re-flash the complete stock, also MIUI 10/A 9, to have the clean situation like in the old days
@zgfg thank you very much for your answer.
May you can tell me if i should prepare anything to get the bootloader unlocked again easily or is it the same procedure like requesting the file from mi.com ?
And maybe you can tell me if i can flash eea or global rom aswell as i live in Italy/europe or china is required ?
Danny94 said:
@zgfg thank you very much for your answer.
May you can tell me if i should prepare anything to get the bootloader unlocked again easily or is it the same procedure like requesting the file from mi.com ?
And maybe you can tell me if i can flash eea or global rom aswell as i live in Italy/europe or china is required ?
Click to expand...
Click to collapse
I suppose your BL is unlocked since you were flashing.
You can check in Fastboot:
fastboot oem device-info
Regarding how to flash the fastboot firmwares, see (I didn't use myself):
How to Flash Xiaomi Firmware using MIUI Fastboot and Recovery ROM
Ever since the dawn of affordable smartphones in countries like India and China, the demand for more has increased. The consumers now, more than ever, are
www.getdroidtips.com
Long ago, when I switched from stock to Xiaomi.eu, I switched from EEA (but AFAIK, Xiaomi.eu guides nowhere require to be coming specifically from EEA, Global, China, Russia)
Yeah im unlocked, but if i recognize it correctly flashing stock will lock bootloader again.
Need to do further research tomorrow than if i can prevent that somehow .
Thanks.
Danny94 said:
Yeah im unlocked, but if i recognize it correctly flashing stock will lock bootloader again.
Need to do further research tomorrow than if i can prevent that somehow .
Thanks.
Click to expand...
Click to collapse
Take a look to the screenshot from Mi Flash in the guide, there is the option Clean all vs Clean all and lock
That is a common issue, people leave on default: Clean all and lock and if anything goes wrong while flashing (wrong firmware or something) they hard brick their phones and since they locked them, they cannot flash again (and must ask for the paid EDL support)
zgfg said:
Take a look to the screenshot from Mi Flash in the guide, there is the option Clean all vs Clean all and lock
Click to expand...
Click to collapse
Thank you so much for pointing that out, i surely have missed that.
If i can keep it unlocked may i stay at stock and will do a lot of debloating and optimization as i wont update it .
Hi
Kind of in a pickle here, I have upgraded to the EU version of the rom and then updated to the above 13.0.5.0 SKAEUXM. Now the issue I am facing is no matter what version of twrp I install or boot into it doesn't show me the internal storage and neither can I copy anything there for some reason. ( That's TWRP out of the question trying to flash magisk or trying to extract the phones boot.img? )
Neither can i get hold of miui 13.0.5.0 SKAEUXM zip file where i can extract it and utilise the boot.img either as its no where to be found aka the full rom?
How do I root with magisk on my mi 11 ultra miui 13.0.5.0 SKAEUXM. Any suggestions or links would be greatly appreciated.
Regards
You can only root via adb fastboot using the fastboot version of your rom to patch the original boot.ini. AFAIK there are no fastboot versions of these roms quite yet
xNAPx said:
You can only root via adb fastboot using the fastboot version of your rom to patch the original boot.ini. AFAIK there are no fastboot versions of these roms quite yet
Click to expand...
Click to collapse
okay i managed to find a twrp and use the following command
fastboot flash boot_a twrp.img
that worked fine and i was able to see the storage. flashed magisk canary which then sent the phone into twrp loop.
restarting again installing the eu 12xxx rom which i will update to 13.0.5.0 SKAEUXM and then re do the procedure with normal magisk and see how that fairs. when i do normal fastboot flash recovery twrp.img i get a failed message.
will update
AliasFaux said:
okay i managed to find a twrp and use the following command
fastboot flash boot_a twrp.img
that worked fine and i was able to see the storage. flashed magisk canary which then sent the phone into twrp loop.
restarting again installing the eu 12xxx rom which i will update to 13.0.5.0 SKAEUXM and then re do the procedure with normal magisk and see how that fairs. when i do normal fastboot flash recovery twrp.img i get a failed message.
will update
Click to expand...
Click to collapse
Use unsupported version of twrp with miui 13 (A12) can brick your phone, remember that
Still no working twrp for miui 13 (A12)
everything's been fine I been testing various roms and trying to get boot.img from miui 13 eu rom but while being careful on one occasion i forgot to check clean all and instead it was sat on clean all and lock and it locked and now i have fast boot only no recovery and boot loader is locked, I don't get why they would design this software to auto select clean all and lock rather than nothing so you get to select before you can even proceed unless it was malicious and done on purpose?? I done the unlock thing last night and have to wait 134 hours.
pay for a phone and still be at the mercy of the manufacturer, no, fk that. this phones getting flashed back and sent right back up the Chinese where the sun don't shine.
anyways what option do i have apart from now being at the mercy of another foreigner who just wants you to pay him before he even wants to talk to you or answer any questions or ask any about your issue.
all i got was pay no refund pay no refund from one dude in india no questions no nothing. i asked questions and he couldn't even answer one of them apart from with a maybe and a ? (Wont take any names)
so this is where I'm at fastboot with locked bootloader, no recovery or data. cant twrp on locked device cant set to edl mode via fastboot nothing.
any attempt has rendered cant do anything on locked bootloader. I can see the phone on mi flash and try to flash it but keep getting the locked error.
I have tried a global rom a eu rom a chinese rom hell even a engineering rom all the above give cant erase on locked stae error while the engineering one gives Antirollback error, and yes i have deleted the section of anti rollback check still get some other error?
Over to you guys.
AliasFaux said:
everything's been fine I been testing various roms and trying to get boot.img from miui 13 eu rom but while being careful on one occasion i forgot to check clean all and instead it was sat on clean all and lock and it locked and now i have fast boot only no recovery and boot loader is locked, I don't get why they would design this software to auto select clean all and lock rather than nothing so you get to select before you can even proceed unless it was malicious and done on purpose?? I done the unlock thing last night and have to wait 134 hours.
pay for a phone and still be at the mercy of the manufacturer, no, fk that. this phones getting flashed back and sent right back up the Chinese where the sun don't shine.
anyways what option do i have apart from now being at the mercy of another foreigner who just wants you to pay him before he even wants to talk to you or answer any questions or ask any about your issue.
all i got was pay no refund pay no refund from one dude in india no questions no nothing. i asked questions and he couldn't even answer one of them apart from with a maybe and a ? (Wont take any names)
so this is where I'm at fastboot with locked bootloader, no recovery or data. cant twrp on locked device cant set to edl mode via fastboot nothing.
any attempt has rendered cant do anything on locked bootloader. I can see the phone on mi flash and try to flash it but keep getting the locked error.
I have tried a global rom a eu rom a chinese rom hell even a engineering rom all the above give cant erase on locked stae error while the engineering one gives Antirollback error, and yes i have deleted the section of anti rollback check still get some other error?
Over to you guys.
Click to expand...
Click to collapse
Relock bl when flash different branch rom with original rom, will make the phone cannot boot. Only way to fix it is someone with special account, just can fix it in some ez step
UPDATE
so the phone is back on Chinese rom now, that it came with but the boot loader is locked until another 120 hours...can I install the eu rom over this chinese rom or replace it without boot loader being unlocked or do i have to wait the 120 hours before i can unlock and then wipe and reinstall eu rom?
AliasFaux said:
UPDATE
so the phone is back on Chinese rom now, that it came with but the boot loader is locked until another 120 hours...can I install the eu rom over this chinese rom or replace it without boot loader being unlocked or do i have to wait the 120 hours before i can unlock and then wipe and reinstall eu rom?
Click to expand...
Click to collapse
u must wait
yes "MUST" lol
okay until i can upgrade again i want to go to eu rom from Chinese but there are 2 variants, EU and EEA which is the one people go for that say is a better version than the Chinese rom?
AliasFaux said:
okay until i can upgrade again i want to go to eu rom from Chinese but there are 2 variants, EU and EEA which is the one people go for that say is a better version than the Chinese rom?
Click to expand...
Click to collapse
EU isn't rom variant. They call that EU because full name is xiaomi.EU
Remember official rom branch: global, global EEA, global IN, china
Xiaomi.eu is just china miui with some mods for working with global user
hungragezone said:
EU isn't rom variant. They call that EU because full name is xiaomi.EU
Remember official rom branch: global, global EEA, global IN, china
Xiaomi.eu is just china miui with some mods for working with global user
Click to expand...
Click to collapse
i'm even more confused now, I went from china rom to global but got told there an eu rom thats better which everyone switches to, by that I assumed it was the Europe variant aka you had chinese, indian, global and then europe.
which is that rom that alot of people recomend? do they mean EAA rom? aka this
Download Xiaomi Mi 11 Pro/Ultra Firmware ROM TWRP (star)
Xiaomi Mi 11 Pro/Ultra Firmware (star) ⭐ Mi 11 Pro/Ultra ROM ⭐ Mi 11 Pro/Ultra Global ROM - EU ROM - TWRP - Fastboot ROM
mifirm.net
if not can you link which one please so i have an idea and prepare to download for upgrade when i can unlock thx.
Regards
Everyone relax.
Edit: There is no need to respond to this message.
Edit 2: Thread cleaned. I will be talking to everyone involved shortly.