:good:Thank you for the hard work
vlad3647 said:
:good:Thank you for the hard work
Click to expand...
Click to collapse
Naaaa...Tanks to @pduper:silly:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
pmduper said:
Many thanks to you @luisgonzales1977 for your work.
sm-g900i
Formatted and advanced cleaned
Installed Bliss-v12.2-klte-UNOFFICIAL-20200128 and open_gapps-arm-10.0-pico-20200124 together
Rom is very nice.
I have noticed that audio levels are low and device lags while in settings menu.
Anyone else experiencing this?
Click to expand...
Click to collapse
yes...I installed earlier and I think its the best of the new Android 10 Roms for our device....I installed the Intelli Kernel and raised the volume levels....the lag in settings is a pain... I noticed the gear on the footer of quick settings wont work unless you bring the pull down all the way out....My guess is an overlay is probably in conflict with the system ui
Test Build Upload ...
Download.
luisgonzales1977 said:
Test Build Upload ...
Download.
Click to expand...
Click to collapse
Would love to test this but very happy with your other test build MSM Xtended that I have been using it all day with no problems..thanks again for the work you are putting into these roms
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
SmgKhOaRn said:
You have to know that android 10 is Beta Stage. If you don't want to face these bugs, you can simply go back to LOS 16, which is stable.
Bluetooth problem is always issue since LOS 15.1, so you'd better not expect to fix it in few days only.
See curiousrom's post that says you should don't press devs to fix these issues since they do volunteering. Therefore, if you keep this attitude, you will be sad because no one will develop any roms then.
Click to expand...
Click to collapse
Lineage os is ****..best pie os is DOT OS 3.1
Skerleton said:
Lineage os is ****..best pie os is DOT OS 3.1
Click to expand...
Click to collapse
Wrong thread mate. Take your disrespectful comments elsewhere!!
Skerleton said:
Fonts not working correctly...not all the phone and all the apps are fonted with my selected font in settings..sound to low..i cant hear anything when call or when receive some notification...and why no one cant fix connect headsets?...all android 10 mods have same problems..like copy pasted and changed ui only
Click to expand...
Click to collapse
Oh no!! And on top of all that mummy didn't give you any lunch money! I feel for you my friend, I really do. It must be so tough going through life with no respect for anyone, especially when they are working hard and free of charge to bring your aging device up to date, God that sucks doesn't it.l?! Tell you what, you go and enjoy your pie and the grown ups will come and let you know when all these iddy biddy widdle bugs have gone.
I can't download the link, because the file was deleted.
Who can give me a download link?
Thanks!
Access denied where can I download the rom?
n_boy86 said:
Access denied where can I download the rom?
Click to expand...
Click to collapse
Try this link ?
https://qc5.androidfilehost.com/dl/...3197/Bliss-v12.2-klte-UNOFFICIAL-20200130.zip
I expected many Problems when migrating to a q Rom. Waited until today and started with Bliss.
And all i can say is that this Rom is awesome in responsiveness and Options. Everything is working so far. Only Thing is that there is no selinux set for now.
But that is okay. Everything else just works amazingly good!
Phone (with Recorder outofthebox), Camera, all Google Apps, WiFi, Mobile Data, Magisk
Also my 128g sd was set up as adopted storage and uses f2fs by Default. Nice!
Not a single glitch or freeze.
Will consider using this as my daily Driver.
Coming from LineageOS16
Big thanks to the devs from bliss project and OP of this Thread!!!!
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
ajox said:
Thinking about formating my DATA and CACHE also as F2FS. Would that Work and is that a good Idea? What do you think? More over is it possible to use also System as F2FS with Bliss?
Would really appreciate it.
And i found a little bug with gboard. There is a little unused space between my navbuttons and the bottom of my gboard. Is there an Option to Change that?
Thanks
Click to expand...
Click to collapse
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
You have to disable gesture navigation bar to remove that blank.
SmgKhOaRn said:
I think its better to change only cache partition because f2fs is unstable due to our kernel version.
when I used this rom with tuned kernel, f2fs all, apps stopped frequently so I had to reboot a lot of time. This is just my opinion.
Click to expand...
Click to collapse
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to usw F2FS formated system Partition right?
Think i will give it a chance this weekend.
SmgKhOaRn said:
You have to disable gesture navigation bar to remove that blank.
Click to expand...
Click to collapse
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
ajox said:
Did You try that with intelli Kernel, too? But as you said the rom is generally capable to use F2FS formated system Partition right?
Think i will give it a chance this weekend.
Thought about something like that. Anyway i dont find such setting... Maybe iam blind?
Click to expand...
Click to collapse
IDK since I don't like that kernel...
I didn't tested on this rom (using other Q rom now) so You can try and tell about the results... (Backup data first, don't need it on cache if you want...)
Just search it in setting's search section (type gesture if you can't find)...
Or remove qemu.hw.mainkeys=0 in build prop...
Can't use f2fs in System partition lol...
It will force to install as ext4 even you format it to f2fs...
This is all same in other roms...
Related
Removed
Reserved
Moar reserve
Screenshots
I'm gonna try this. Hope it works better. I'm not having any luck flashing the NEXT kernel and also have no phone audio using the "other" stock-based 4.2.2 (same problem as @ketut's Sammy-based 4.1.2)....
Ahhhh big job Luigi!! :beer:
Screenshots ?
I´ll hit "Thanks" tomorrow (Not able today: "Sorry, you are limited to 8 thanks per day")
You can also use https://www.file1.info/ for uploads.
Anonymous users can store files up to 1 GB and download files at a normal/slow speed. Registered users can store files up to 1.5 GB each, use 50 GB total and get higher speeds. Registration is free.
Click to expand...
Click to collapse
TabletUI patch?
rod555 said:
TabletUI patch?
Click to expand...
Click to collapse
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
fooiskandar said:
Stock rom default is phablet ui ... btw maybe luigi help u ...
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Not Tablet UI Patch yet.
Also @Android-Andi Screenshots! Yes! I forgot.
Edit: Screenshots added on post 4
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Luigi2012SM64DS said:
Alright. I have a working phone remover. The deny signal is gone. The phone stuff is gone. Only problem is the device reboot when trying to bring up the power menu. So I guess we can't remove mobile data from the settings. Unless I or someone from here can figure something out. Anyways, now I''ll try to add flare effect and fix the mic and stuff.
Click to expand...
Click to collapse
Please try add ro.carrier=wifi-only to build.prop, NEXT kernel will stop 2 phone related daemon on boot.
Alright, I made my own version of the blackhawk 4 update annnnnnd... mic still doesn't work. @ketut.kumajaya. I think 4.2.2 uses some different files for mic.
Any error with sync app & calendar?
For me everything went well. Realy smooth and fast. But first time i tried to delete some of the things i don't use from system/apps(nothing that i don't usually delete) TW FCs....will try again with only freezing. Ty for your good work
Does swap sd work? thanks
Not working on 3100
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
I have the P3113 and simply go into systemui.apk and remove all signal icons. I also remove all the battery icons simply because I prefer the bat %. I know this does not remove the phone stuff itself but it does get rid of the icons in the Noti bar without any errors.
Not the best way but it works.
fast and smooth but i have an problem after flashing there is no gallery app
a1shakes said:
on Booting the message "android.phone" has stopped and "android.gapps" has stopped pops every second. Cant even get through the setup process.
Procedure which i followed was from cm 10.1.2
Wipe data-> wipe cache->wipe dalvik->install rom->wipe cache->wipe dalvik and reboot.
going back to cm now.
Thanks.
Click to expand...
Click to collapse
try formatting /system and /data before you flash the ROM (just be sure you have a nandroid backup, ofc ^_^)
Why call this rom the PlayStore Rom? Because this rom features absolutely nothing, thats the beauty of it! If you want something your going to have to get it from the PlayStore. You can customize it any way you want. The rom boots and you can make a phone call and get on the playstore thats about it. So have fun!
Features
Google Dialer and Google Contacts
S7 Camera
Google Launcher
Samsung Gallery Left so Lockscreen Wallpaper can be changed
Google Now
Google Maps
Verizon Visual Voicemail
L Speed (for tweeks and other stuff)
Thats It No More! Dont Ask Thats why its called the Playstore Rom. If you want it download it!
Bugs
Alot of things will not work or may FC in settings. This is because it is removed. Deal with it!
Install Instructions For PI3 International Firmware
Note about new rom
This will require you to reinstall The PEH firmware and reroot. Once done The new rom will flash files not a system.img any more. The zip file will be alot smaller. I think this will also help on the MMS problem for some people, as the system partition was getting messed up during multiple flashes of system.img images
Recommended you be on PH1 or PI3 firmware and Rooted
Install Flashfire
G930U_PEH_Deodexed_BS_Free_Rom.zip on internal or sdcard
Open FlashFire and agree to terms
Click the + button in the actions menu
Click Flash Zip or OTA and locate VZW_G935U_PI3_DEODEX_AROMA_V1.zip_Rom.zip and click on it
In Options menu leave the box Mount/system read/write checked and click the check mark in the top right corner of options menu to flash this rom
Leave EverRoot disabled
Leave reboot menu set to normal
Click On The Big Flash Box at Bottom With the Red lightning bolt to flash rom
This zip will wipe data but not internal storage
View attachment 3814934
Downloads
VZW_G935U_PI3_DEODEX_AROMA_V1.zip
Change Log
V2
Zip flashes files now no more system.img
Added root essentials which includes a root browser and lots of other cool features.
Added force doze which will increase battery life by up to 40 percent,
Added Adaway for add blocking
Updated FlashFire to V52
Includes Previous Fix
Post Install Instructions
You must decide if you want to use Google IncallUI or Samsung InCallUI. Samsung InCallUI will allow too still receive and switch to video calls and the google IncallUI will only support HD calling. To switch to google IncallUI goto settings/applications click on default applications choose calling app and click on the blue phone app. To switch back to samsung IncallUI is a little more complicated. You will need an app like root explorer and goto data/system/users/0 and then findthe setting_secure.xml and delete and then restart phone. This will restore samsung IncallUI as default
You will also want to turn edge features off since everthing is deleted
Also you need to goto SuperSU app and goto settings and click on enable su during boot and also click trust system users
Goto this thread and under Recommended Next Steps find the S7_or_S7Edge_Fixes_V15.zip or latest version and flash to fix kernel lage and doze fix.
Goto setting/about phone
Click on build number 5 times to enable developer options
Change animation and duration scales to .05 this will speed up phone
You will also have to change charging/file mode from within developer options
Remember Wiping Dalvik cache will cause phone to take up to 10 min to boot on deodexed roms
If using samsung IncallUI here is a fix for call phone FC and also location service fix
Phone_Fix_Misc_Fix.zip
Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk
markwebb said:
Another! Is this that different from your other?
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Of course it is different read the OP
Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk
@jkruse Thanks bro appreciate your efforts. One favor, do you know where the Olympic theme is located on your first Rom? (Which folder?) I'm going to extract it from the other version and install it in this one. For some reason its not on the Samsung theme store.
markwebb said:
Yes I can read. Sorry to support you.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Real talk you're an awesome dev
jrkruse said:
I didnt mean for my reply to come across rude. I just thought since the OP looks like the other one you thought it was the same. This is basically nothing but a bootable rom with like 5 apps installed thats it there are over 180 running apps removed. I kind of thought it would be cool to be able to build your rom how ever you want it without having to worry about what you can delete and what you cannot. I appreciate the support especially on new development. Understand I have many threads and and other devices so i sometimes keep my answers short and direct especially when using the mobile app which I hate using.
Click to expand...
Click to collapse
Ok, that is what I thought. I just was trying to determine if there was anything else major missing from that other ROM, knowing some apps would have to be pulled or installed, hence your "Playstore" moniker for this ROM. Ok, this is a good clean base ROM for those who like to order "a la carte" down the road when the need for other features are required. I may give it a spin for the fun of it.
Cool! We are good.
sweet idea
Inb4 crazy high battery stats
Just finished flashing about 4 minutes ago. Still suck on the white SAMSUNG logo. Is this normal?
UPDATE: Took like 8 minutes to boot. Runs fine.
Downloading now. Been waiting for something like this. Cheers.
ShadowyStorm said:
Downloading now. Been waiting for something like this. Cheers.
Click to expand...
Click to collapse
Super smooth. Thank you good sir.
If using samsung IncallUI here is a fix for call phone FC and also location service fix for apps not asking proper permission
Phone_Fix_Misc_Fix.zip
Should we flash this either way?
bickfordman said:
Should we flash this either way?
Click to expand...
Click to collapse
I'm using the Google incall with no issues at all. Probably no need to flash if that's what you're using.
So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.
Hey I'm considering installing this ROM because I live the minimalism of it. How's the performance? Anyone mind posting an AnTuTu score?
Syn Ack said:
So far the ROM is nearly perfect.
Having some MMS issues again. It only works when Wifi is turned off or not connected to a network.
Any assistance would be greatly appreciated. I even flashed your fix it ZIP.
Click to expand...
Click to collapse
I actually found one of the battery saver apps to be causing the issue. I think it was amplify through xposed, it caused the mobile data to turn off when connected to wifi. So, i turned it off and haven't had an issue since.
The base rom turned out to be full of small bugs and just not worth it any future work on it. Sorry...
After two days of digging around finally managed to fix the only CM13 release that doesn't have the nasty and so far impossible to fix 3G bug some of us experience with all other CM based releases to date.
I think this ROM by itself deserves a new thread despite the many we have already... Don't you agree?
Fixed Video Playback, Video Recording, Network Location, Speaker Low Volume Level... Those were the major known issues with this version...
Will get us by till 3G bug is fixed(I hope) in later ROMs.
Credits and thank you to:
@ffboy2009[/MENTION] for his 2nd CM13 release this ROM is based on;
@ajsmsg78[/MENTION] for the helium video recording fix;
This is all-in-one Mi Max UNIVERSAL CM13 ROM for both hydrogen and helium devices. It will check an install the proper version for your device.
BUT MAKE SURE YOU ARE RUNNING THE CORRECT TWRP FOR YOUR DEVICE CODE!!! HELIUM WITH OLD TWRP FOR HYDROGEN WILL BRICK!!!
If you are coming from any CM13 rom you can dirty flash. From anything else including RR clean flash is recommended! Backup device before install etc but you know what to do if reading this...
As usual install gapps etc...
Report bugs and I will try fixing them but I am very time/resources limited during the week.
Download: cm-13.0-20160614-UNOFFICIAL-hydrogen+helium-fixed_nijel8.zip
PS. Will appreciate if you guys don't link the ROM download directly anywhere else... Refer to this thread instead... Let's keep it all in one place for better feedback. Thank you!
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
n1tro said:
Just did a clean install. Video recording doesnt work. Tried adding the fix line in build.prop but didn't help.
Click to expand...
Click to collapse
It's not the build.prop...
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
nijel8 said:
What exactly is doing? No sound or else... Need to know to fix it for helium I can't test...
Click to expand...
Click to collapse
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works with sound. I let the phone sleep for a bit and seems to be still working.
Same here in another helium, just start to records and stop suddenly :crying:
n1tro said:
After pressing record, it just starts and stops. I took the fix file that asjmsg78 created and flashed it and also left the fix line in the build.prop and it works. I am letting the phone sleep and will test again.
Click to expand...
Click to collapse
Ok... I'll fix it... Just to be clear you are talking about this file for helium, right? Because it is not needed for hydrogen...
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
nijel8 said:
Ok... I'll fix it... Just to be clear you talking about this file for helium, right?
[FIX] [HELIUM] [HYDROGEN] Video Recording Fix by ajsmsg78
Click to expand...
Click to collapse
Yes, that is the file I used to flash after installing this rom.
n1tro said:
Yes, that is the file I used to flash after installing this rom.
Click to expand...
Click to collapse
Ok, thank you for the quick reply... We'll get it fixed right away...:good: Fixed... Uploading... Done...
Glad no flashing problems on helium. Took a slim chance by not having you or @ajsmsg78 test it on your heliums before publish it.
Skalexs said:
Same here in another helium, just start to records and stop suddenly :crying:
Click to expand...
Click to collapse
Please redownload... Just fixed it...
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
ajsmsg78 said:
I just got home and saw this. Great news. I'm glad you were able to fix everything. All we need now is to figure out the data bug and most of our roms should be perfect
Click to expand...
Click to collapse
Yeah... data bug is going to be difficult without proper debugging and taking logcat/dmesg logs. We both can't do that...
Let me know if you want to fix RR5.7.0 and I will give you details...
nijel8 said:
Please redownload... Just fixed it...
Click to expand...
Click to collapse
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
nijel8
Thank you!:good:
Skalexs said:
Great
I've made a clean install and video recording works :good:
Thanks for the time you've wasted here :victory:
PD: I had data bug in RR, but with this rom it seems to work perfectly
Click to expand...
Click to collapse
That's why I fixed exactly this one...
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Great job bro..3g working here..Greeting from Malaysia...
Helium 64gb
Sent from my MI MAX using XDA-Developers mobile app
Great Job!
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
techy97 said:
Thanks for the effort, video recorder has become useful again
Just one request, add the Enhanced LTE mode in the sim network options section. Annabathina build has the same issue of no selection/activation menu.
Wish you get a fix really soon. And thanks again.
Click to expand...
Click to collapse
Ii didn't build this rom... I am just the fixer... Adding things is not that easy in prebuilt roms.
Even if I can add it I can't test LTE at all and I hate doing things I can't test... So probably not gonna happen, sorry...
panyan said:
Awesome work dude!!!
In general, how does the battery life compare on cyanogenmod ROMs compared to miui?
What about reception/signal compared to miui?
Also, I assume we don't need a locked bootloader for this
I can't wait to try it:victory::victory:
Click to expand...
Click to collapse
for me: normal use on Miui--> 1,5 days, normal use on CM-->3,5 days
This ROM should tie people over until xiaomi releases the kernel for our devices and some developers come into the picture. Amazing how much was accomplished by nijel8 and asjmsg78, both who aren't developers but had enough curiosity about our devices to tinker with it to make it a better device for all. Show some appreciation by making a donation to these guys or we all be stuck with the crappy miui ROM with no android auto and delayed notifications!
Hi There Everyone!First a brief: I've been a longtime XDA user, but never found the need to create an account. Now, I bought a Redmi 6 and I'm really disappointed by the development:crying:, so I thought i'd chip in a bit I don't have permission yet, so I posted this here.
As you know, till now there are NO Custom ROM's available. This is really sad, and I can't live with MIUI. So I decided to give GSI (Generic System Image) ROM's a try.
And guess what? They work! I tried installing Lineage OS 15.1 on our cereus. The rom is really fast and smooth. Here's what I found:
Working:
Wifi
Bt
Camera
Vibration
Sound
Finger Print
Bugs:
SIM detected, but no range found. RIP calls/sms/data. Looks like a problem with the raido's.
Headphones don't work
I couldn't test hotspot and gps.
Even though there is a bad bug, it still works surprisingly on this MediaTek SoC with no drivers / kernels. All we need is a little paching and we should be good to go!
Give it a try. Ill post guide on how to do this later. For now, i'm using miui cuz i wanna make phone calls
Here are screenshots:
https://ibb.co/J7FRk9K
https://ibb.co/sbNk3N4
https://ibb.co/K5KDW43
https://ibb.co/5Mfrz0d
https://ibb.co/kHCwqb2
https://ibb.co/S3X9gkv
https://ibb.co/1JYNmqp
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
What about finger print reader?
TanRayCz said:
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
Click to expand...
Click to collapse
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
hiitsrudd said:
What about finger print reader?
Click to expand...
Click to collapse
It works! Sorry, I forgot to mention that - added it now :good: Btw, even though it works, it isn't as accurate and as fast as MIUI.
Tech_Expert said:
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
Click to expand...
Click to collapse
I meant to say good job about putting this all together. Nice.
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
TanRayCz said:
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
Click to expand...
Click to collapse
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Tech_Expert said:
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Click to expand...
Click to collapse
All i tried was LOS and Pixel Eperience. Both are same, except PE has Android 9.0. I tried treble RR, it had really cool logo while booting, and i was really excited for RR because i never tried it. But i never made it to boot. Boot logo is looping infinitely and i tried fresh installing (With MiFlash clear) about 10 times.
Edit: Maybe if you would want to, you can give it a try https://forum.xda-developers.com/pr...0-resurrection-remix-v7-0-arm64-32-b-t3891636
Edit: I didn't understand most of it, but i could start adb logcat while booting. From all i could understand, all apps were dying and restarting all over.
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
[email protected] said:
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
Click to expand...
Click to collapse
That's nice and all, but more info would be cool. SIM works?
TanRayCz said:
That's nice and all, but more info would be cool. SIM works?
Click to expand...
Click to collapse
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
[email protected] said:
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
Click to expand...
Click to collapse
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
JosifBoga666 said:
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
Click to expand...
Click to collapse
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
[email protected] said:
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
Click to expand...
Click to collapse
But this doesn't fix ussd right?
JosifBoga666 said:
But this doesn't fix ussd right?
Click to expand...
Click to collapse
I haven't tested this, but why do you think so?
[email protected] said:
I haven't tested this, but why do you think so?
Click to expand...
Click to collapse
Since you said ussd is broken by default i thought that that wouldn't fix it.
JosifBoga666 said:
Since you said ussd is broken by default i thought that that wouldn't fix it.
Click to expand...
Click to collapse
By default — right after installing, without adding this line.
[email protected] said:
By default — right after installing, without adding this line.
Click to expand...
Click to collapse
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
JosifBoga666 said:
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
Click to expand...
Click to collapse
It doesn't work for me. Same as every single other GSI rom.
Ive noticed this ROM doesn't seem to be listed on here anywhere but I've been running it for a few weeks now. The official build is on the AICP website with weekly updates that install perfectly through the built in updater. I hope the AICP team is okay with this post. If not, please remove.
It's not the most unique ROM out there but it is the best I've run out of every ROM I've tested on here, which is all of them. My first reaction to the pink background option for the daytime theme was "WTF" until I realized that it makes everything visible regardless of the level of sunlight or glare, and at the highest brightness puts no strain on the eyes.
Personally, I decided to switch kernels because the one built-in was geared towards battery life...like 36-48hr battery life, but otherwise this ROM is tough, reliable, the fingerprint sensor responds immediately, and everything works flawlessly. You can set separate themes for day and night, there's signature spoofing, a built in debloater to just click to remove any preinstalled package you don't need, and a selinux switch. Audio mods and magisk modules that have given me issues on all other roms work well on AICP. If you check the OnePlus 8 forums youll see the Thread for AICP there, and it will give you a fairly accurate idea of what to expect. The built in launcher is the best I've come across as well IMO.
For those who haven't tried it, check out Mull browser. It's a stripped version of Fennec with a great Sync feature and some good extensions. It's only available on Fdroid I believe. I was a dedicated Bromite user until I came across it about a week ago, and I never even liked Fennec...still don't.
Yes they started the update, but i don't know why they didn't inform about it in xda????
Gapps included ???
akshat2499 said:
Gapps included ???
Click to expand...
Click to collapse
No, flash mindthegapps
I have installed it yesterday... Just fabulous and awesome..response in terms of all.. Flashed open gapps micro
What kernel ?
I flashed this last week but I'm on Verizon and it has the RTT screen pop up when I make a call. If it wasn't for that it would be perfect. Hopefully someone can fix it.
Thank you sir for sharing was looking months back but they didn't support our 6t so i had given up
Fabulous ROM ever experienced so far... Everything works pretty and responsive.. Looking for best updates in future too...
crosschris said:
Thank you sir for sharing was looking months back but they didn't support our 6t so i had given up
Click to expand...
Click to collapse
Pls do work for oneplus 6t always... ROM is working fine.. Realised many good things in this..thank u
Prabhuraj 0 said:
Fabulous ROM ever experienced so far... Everything works pretty and responsive.. Looking for best updates in future too...
Click to expand...
Click to collapse
You'll get an update every week, just look in aicp extras, go to updates, click download and install but don't reboot. Then go to magisk assuming you're using it and click install to other slot. After you see Magisk finish patching the new stock boot image you can go back to the update section and click restart. I turn all of my modules off before I update and turn them back on when I'm done I haven't had any issues. The only place I can find any support regarding this rom was by joining Discord. Join the Aicp channel. I switched to MCD Kernel because I wanted a bit more performance. The battery life with the included Kernel was more than I needed! This ROM comes with aicp recovery so on a first-time Flash be sure you refresh TWRP or whichever recovery you're using.
S'il tecpl
Yeedatoy said:
View attachment 5347921please, link Of this kernel for one plus 6t
Click to expand...
Click to collapse
Yeedatoy said:
You'll get an update every week, just look in aicp extras, go to updates, click download and install but don't reboot. Then go to magisk assuming you're using it and click install to other slot. After you see Magisk finish patching the new stock boot image you can go back to the update section and click restart. I turn all of my modules off before I update and turn them back on when I'm done I haven't had any issues. The only place I can find any support regarding this rom was by joining Discord. Join the Aicp channel. I switched to MCD Kernel because I wanted a bit more performance. The battery life with the included Kernel was more than I needed! This ROM comes with aicp recovery so on a first-time Flash be sure you refresh TWRP or whichever recovery you're using.
Click to expand...
Click to collapse
Format Data + Internal Storage like always?
Huskied said:
Formater les données + stockage interne comme toujours ?
Click to expand...
Click to collapse
Oui
jeffvs980 said:
I flashed this last week but I'm on Verizon and it has the RTT screen pop up when I make a call. If it wasn't for that it would be perfect. Hopefully someone can fix it.
Click to expand...
Click to collapse
AluminumTank said:
So I went and read through the RTT docs. One way to make sure RTT is disabled is to remove it from the carrier configuration, lol. So I went and did just that:
UPDATE: So, I found a better way to do this that doesn't break everything else. You can go to /data/user_de/0/com.android.phone/files and edit the carrierconfig file there, mine was called carrierconfig-com.android.carrierconfig-89148000001882338238-1839.xml. Change the following line:
<boolean name="rtt_supported_bool" value="true"/>
becomes
<boolean name="rtt_supported_bool" value="false"/>
And reboot! After that, RTT shouldn't be a bother anymore. This is a bit of a hack, but it works! XD
Click to expand...
Click to collapse
Thank you, AluminumTank! This edit works. It works on Lineage OS, Fork Lineage OS and should work here!
chidi_duru said:
Thank you, AluminumTank! This edit works. It works on Lineage OS, Fork Lineage OS and should work here!
Click to expand...
Click to collapse
I tried it on this one but it didn't work for me.
jeffvs980 said:
I tried it on this one but it didn't work for me.
Click to expand...
Click to collapse
Oh?! I used root explorer, then clicked on "R/W", then made the edit, saved. Root explorer then told me that it saved the original under a different extension. I can see the two files. Then, I rebooted and it stuck.
chidi_duru said:
Oh?! I used root explorer, then clicked on "R/W", then made the edit, saved. Root explorer then told me that it saved the original under a different extension. I can see the two files. Then, I rebooted and it stuck.
Click to expand...
Click to collapse
I just reflashed this ROM again and made the edit just as you described with root explorer which is exactly what I did in lineage but the RTT window still pops up.
Download link?