Database Develop

[Q] i9070 root UBLG2 firmware

Hello guys, first of all thanks to anybody who reads this. I really appreciate the time and efforts people puts helping others. For this thanks!
Well my problem is simple: I really want to root my device, I have a new Samsung i9070 (S Advance). But when I looked around for this, I saw things were not going to be that easy.
First of all I bought my device in Uruguay (from Ancel).
Second, the firmware that it has now is: I9070UBLG2
Third Im not sure if is stock or not, but I can say that when it turns on the original Samsung animation was changed by an ugly one from my local carrier. Dont know if that means is a non stock firmware or not.
I saw some tutorials to root this device, but they are for some specific firmwares. One of these tutorials said if I didn't have one of the supported firmwares, I needed to flash to one of them...but which!
Also I saw this thing of the binary / flash counter. I would not like to mess with that thing either, and Im not sure which rooting technique does avoid increasing that bloody counter.
I know is too much, that this is a new device and not an important one (like SIII) so probably tutorials are not massive.
I dont pretend any of you guys to answer me and teach me, I know I have some stuff I need to learn; only thing I would ask is some links, or a plcae to start and to trust!
Again thanks! I'm surprised you even reach this line
Cheers!

que tal? ya que sos de Uruguay voy a aprovechar a escribir en español..
Estoy en la misma y te quería preguntar si habías tenido suerte con ese firmware maldito de antel??
Cualquier avance que quieras compartir se agradece.
Saludos!

Mira lo que yo se es que, según tengo entendido en Gingerbread (2.3) no puedes rootear sin aumentar el contador binario pero en Jelly Bean si se puede (4.1) lo que pasa es que si cambias de firmware posiblemente si lo puedas rootear en una mejor version pero hay riesgos para pasarse a Jelly Bean como por ejemplo no se sabe si tu operadora tiene el BootLoader bloqueado. En ese caso tendrias el telefono inservible y si logras hacerlo Shaaan tiene un post aqui en xda en el que viene como rootear en Jelly Bean sin aumentar el contador binario, si quieres el link al post si no lo encuentras te lo paso por MP con lo poco que se aqui ando para ayudar >.<
BANKAI!

Please use English,..
Sent from my GT-I9070 using xda premium

vieri_firman said:
Please use English,..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Maybe we can use our language too lol
Sent from my GT-I9070 using xda premium

vieri_firman said:
Please use English,..
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Sorry i forgot that i must use english in this forums :$ i'll translate the reply later
BANKAI!

Do these information match with your phone:
GT-I9070 - Argentina
PDA: I9070UBLG2
CSC: I9070ANCLG1
Version: 2.3.6
Date: 2012-09-19
Regions: Brazil
Click to expand...
Click to collapse
If yes please continue reading... else Reply me
Ok.. I think diego-ch can help you...
1. Go to his thread "Rooting your Galaxy S Advance without increasing the Binary Counter"
2. Post a REQUEST there that you want to Root and also provide this link too http://www.sammobile.com/firmware/?page=8&view=9038
3. He will download your firmware and root it... all you have to do is Download and Flash it using Odin I guess..
4. But the problem is he is concentrating more on CyanogenMOD and not this so he might not do this as soon as possible

[Q] to install firmware,for entel chile

Hello friends, I need to know which firmware to install on my computer, I'm from chile

newmesis said:
Hello friends, I need to know which firmware to install on my computer, I'm from chile
Click to expand...
Click to collapse
ayuda por favor, ya que tengo mi equipo sin funcionar

newmesis said:
ayuda por favor, ya que tengo mi equipo sin funcionar
Click to expand...
Click to collapse
Si no tienes miedo a perder la garantía desbloquea el bootloader e instala kitkat de TMO. El problema es que el repositorio de roms esta caido.

waiflih said:
Si no tienes miedo a perder la garantía desbloquea el bootloader e instala kitkat de TMO. El problema es que el repositorio de roms esta caido.
Click to expand...
Click to collapse
el bootloader lo tengo desbloqueado, instale la 4.4 de AT&T USA, pero no me corre bien , entonces necesito una rom compatible con mi pais. el servidor esta caido y no se donde sacar esos archivos.

newmesis said:
el bootloader lo tengo desbloqueado, instale la 4.4 de AT&T USA, pero no me corre bien , entonces necesito una rom compatible con mi pais. el servidor esta caido y no se donde sacar esos archivos.
Click to expand...
Click to collapse
I'm also from chile but as this is an international forum please use english. If you have problems use google translator.
right now I'm uploading the file for you. once it is ready will put the URL

beelzebu said:
I'm also from chile but as this is an international forum please use english. If you have problems use google translator.
right now I'm uploading the file for you. once it is ready will put the URL
Click to expand...
Click to collapse
my apologies, replied in Spanish because the user answered me in Spanish, but not happen again, I am waiting for that link

newmesis said:
my apologies, replied in Spanish because the user answered me in Spanish, but not happen again, I am waiting for that link
Click to expand...
Click to collapse
Link to download kitkat TMO retail. works witout issues even with 4G
https://drive.google.com/file/d/0B5jTMAeN2GU5Y1hMQjB1bmRyMWc/edit?usp=sharing

Lollipo Update Help needed Please !

From the Moderator ......... All Postings need to be in English
[FONT=&quot]Hi all, I have the note 3 N900a ... and as you know, a week ago it received the upgrade to lollipop. I need help updating and heard the only way is via ota.[/FONT][FONT=&quot]Since I am not in the United States, I'm from the Salvador have no coverage ATT on my device so idk if getting the ota update will work for me on my phone here.
So, I am unsure whether to upgrade it or not. You help and advice is appreciated
.........you're welcome ..... amigo .........oka1
[/FONT]
Hola a todos tengo este dispositivo note 3 sm-n900a y como saben hace una semana recibio la actualizacion a lollipop necesito ayuda para actualizarlo ya q e oido q la unica manera de hacerlo es via ota y como yo no soy de estados unidos , soy de el salvador no tengo cobertura de at&t en mi dispositivo por lo q nose si llegara la actualizacion ota quien me dice q tengo q hacer para actualizarlo por favor

vencelml said:
From the Moderator ......... All Postings need to be in English
[FONT=&quot]Hi all, I have the note 3 N900a ... and as you know, a week ago it received the upgrade to lollipop. I need help updating and heard the only way is via ota.[/FONT][FONT=&quot]Since I am not in the United States, I'm from the Salvador have no coverage ATT on my device so idk if getting the ota update will work for me on my phone here.
So, I am unsure whether to upgrade it or not. You help and advice is appreciated
.........you're welcome ..... amigo .........oka1
[/FONT]
Hola a todos tengo este dispositivo note 3 sm-n900a y como saben hace una semana recibio la actualizacion a lollipop necesito ayuda para actualizarlo ya q e oido q la unica manera de hacerlo es via ota y como yo no soy de estados unidos , soy de el salvador no tengo cobertura de at&t en mi dispositivo por lo q nose si llegara la actualizacion ota quien me dice q tengo q hacer para actualizarlo por favor
Click to expand...
Click to collapse
Buena tarde amigo. It would help greatly if you said what version note 3. Personally, I have the sm-n900a(at&t version)

blakklanta said:
Buena tarde amigo. It would help greatly if you said what version note 3. Personally, I have the sm-n900a(at&t version)
Click to expand...
Click to collapse
Um, he did.

pre4speed said:
Um, he did.
Click to expand...
Click to collapse
Yes he did... My fault

I have note 3 too
can u help me too? im from El Salvador

Help me!!

Good morning, I have a problem with my mobile yesterday I tried to rootear for odin I left pass but the mobile rebooted and I was in "the recovery is not seandroid to enforce I am already testing everything but I can not, I hope this forum can help! :llorando::llorando:
I just want some help
Buenos Días, tengo un problema con mi móvil ayer intento rootear por odin salio pasar pero el móvil se reinicio y quedo en "la recuperación no es seandroid hacer cumplir ya estoy probando de todo pero no puedo, espero que este foro me puedo ayudar! :llorando::llorando:
Solo quiero una ayuda

just restore your phone using smartswitch or flash it with stock firmware using odin

Thanks you
remosam said:
just restore your phone using smartswitch or flash it with stock firmware using odin
Click to expand...
Click to collapse
Thanks you can upgrade to 6.0 and it turns on, but now it does not only cover emergency calls. I have orange company in Spain but install Paraguay because the phone is from there
There is a solution?

Question REMOVE Firmware FROM OPERADORA Móvil, CLARO (COLOMBIA)

good friends, I would like to know if someone could explain to me how to flash the Global Rom of the redmi note 10s since I have the version of the Company and I want to remove the ROM, AND PLACE THE GLOBAL.... at this time I have the ROM 12.5.4 (RKLLMCR) I WOULD LIKE TO KNOW IF ANYONE CAN PLEASE HELP ME :C

hi, i changed easily region (from oerator personalisation to global) with XiaomiTool V2, witout need too flash. if it can help you...

Antho02 said:
hola, cambié fácilmente la región (de personalización del operador a global) con XiaomiTool V2, sin necesidad de flash. si te puede ayudar ...
Click to expand...
Click to collapse
H Friend what happens is that this tool only works with Qualcomm processors in Mediatek it has not worked for me.

kev99090 said:
H Friend what happens is that this tool only works with Qualcomm processors in Mediatek it has not worked for me.
Click to expand...
Click to collapse
try flashing with MiFlashTool, i can flash stock rom just fine from there.

J6idot said:
intente flashear con MiFlashTool, puedo flashear stock rom muy bien desde allí.
Click to expand...
Click to collapse
I need to unlock the bootloader?

kev99090 said:
I need to unlock the bootloader?
Click to expand...
Click to collapse
Yes

kev99090 said:
H Friend what happens is that this tool only works with Qualcomm processors in Mediatek it has not worked for me.
Click to expand...
Click to collapse
well it worked for me, and i have the same note 10s than everyone for sure.... plus no need to unlock bootloader

J6idot said:
intente flashear con MiFlashTool, puedo flashear stock rom muy bien from all
Click to expand...
Click to collapse
Antho02 said:
bueno, funcionó para mí, y tengo la misma nota 10 que todos, seguro ... además no es necesario desbloquear el gestor de arranque
Click to expand...
Click to collapse
Do you have THE REDMI NOTE 10 OR THE 10S?

kev99090 said:
Do you have THE REDMI NOTE 10 OR THE 10S?
Click to expand...
Click to collapse
if i had the redmi note 10 then i probably wouldn't even be here

J6idot said:
si tuviera el redmi note 10, probablemente ni siquiera estaría aquí
J6idot said:
si tuviera el redmi note 10, probablemente ni siquiera estaría aquí
Click to expand...
Click to collapse
¿Podrías enseñarme cómo eliminar la Rom de la empresa sin desbloquear el gestor de arranque porque ni la pc reconoce mi teléfono en modo fastboot?
Click to expand...
Click to collapse

you have 3 choices:
1. SPFlash Method
Not recommended, but if you want, do it at your own risk (Works with locked bootloader, but please take a backup of EFS before you try this).
2. XiaomiTool V2
Probably will work.
(I just realized you said that this tool doesn't work on MTK, althought someone with RN8P and RN9P were able to change regions just fine. Are you sure you have the correct drivers?)
3. MiFlashTool
Needs unlocked bootloader.

J6idot said:
you have 3 choices:
2. XiaomiTool V2
Probably will work.
(I just realized you said that this tool doesn't work on MTK, althought someone with RN8P and RN9P were able to change regions just fine. Are you sure you have the correct drivers?)
Click to expand...
Click to collapse
As i said it works well, i removed french operator customization and switched to global, and without unlock bootloader

kev99090 said:
good friends, I would like to know if someone could explain to me how to flash the Global Rom of the redmi note 10s since I have the version of the Company and I want to remove the ROM, AND PLACE THE GLOBAL.... at this time I have the ROM 12.5.4 (RKLLMCR) I WOULD LIKE TO KNOW IF ANYONE CAN PLEASE HELP ME :C
Click to expand...
Click to collapse
Lo recomendable primero sería desbloquear el bootloader.
Segundo, descarga en tu PC Xiaomi Mi tools V2 y sigue los pasos xd
Y se instala la Global y listo (Te recomiendo tener la ROM Fastboot del dispositivo a un costado por emergencia) si te salta algún error.. pues con el Fastboot desbloqueado lo instalas manualmente y listo.
Aunque no parezca sencillo, es solo tener paciencia y ya.

ssolved thanks to all.

kev99090 said:
ssolved thanks to all.
Click to expand...
Click to collapse
Hello brother, could you help me? I have the same problem, I want to change the rom of Claro to be able to enable sim 2.
How did you do it?

suarezfco said:
Hola hermano, ¿podrías ayudarme? Tengo el mismo problema, quiero cambiar la rom de Claro para poder habilitar el sim 2.
¿Cómo lo hiciste?
Click to expand...
Click to collapse
suarezfco said:
Te las arreglaste para hacerlo?
Click to expand...
Click to collapse

@kev99090 primero lo esencial, desbloquea el bootloader de tu Xiaomi, con la herramienta MiFlashUnlock, luego descargas la ROM global estable y procedes a flashear con la herramienta MiFlash, haces los pasos y te quedará un Xiaomi con dos SIM habilitadas

No, pude ayer desbloqueé el bootloader pero al trata de instalar la rom global con Xiaomitools v2 arrojo un error y me quedo en el logo de redmi y se reinicia constantemente y de ahí no sale
No, I was able to unlock the bootloader yesterday but when trying to install the global rom with Xiaomitools v2 I throw an error and I stay in the redmi logo and it restarts constantly and from there it does not come out

dajohlopez said:
@kev99090 primero lo esencial, desbloquea el bootloader de tu Xiaomi, con la herramienta MiFlashUnlock, luego descargas la ROM global estable y procedes a flashear con la herramienta MiFlash, haces los pasos y te quedará un Xiaomi con dos SIM habilitadas
Click to expand...
Click to collapse
Desbloquie el bootloader, pero utilice la herramienta Xiaomitoolv2 y salió error y me quedo en el logo de Redmi y se reinicia constantemente

suarezfco said:
Desbloquie el bootloader, pero utilice la herramienta Xiaomitoolv2 y salió error y me quedo en el logo de Redmi y se reinicia constantemente
Click to expand...
Click to collapse
Vuelve a flashear