It is slow, slow, slow... - Xiaomi Mi 8 Questions & Answers

Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
What do you think about that ? At first I thought my battery is dead. It charges as fast as usual. Discharging is like before I'd way. Not worst for sure So I hope Its nor that.
I'm using battery charge limit (the app, nor from havoc sertings) to stop at 81% and charge it always when the minimum reaches 40%. So for battery life I think I'm doing things well.
I'm still on pie. Please, see the attached picture to look at my version.
I'm wondering what could cause this big issue.
I'm used my make lot of backups with twrp 3.3.1-1. Sometimes 2 per days, sometimes none in 2 or 3 days and so from the day I unlocked the phone and installed my first and only rom : havoc. Sure I installed several updates but no other ROM and I stopped updating it cause it worked really as I expect it should. So...
Also, making twrp backups are Soooo slow. Generaly it tooks depending of the size, between 90 sec and 140. Now it takes more than 6 min !!
So before doing a last backup and do anything I wanted to ask what you all think about that before doing a clean install update/upgrade.
Do you think it worth the try ?
I tried to clear caches (both) in twrp. Nothing :/
I'm afraid I killed my phone memory or battery. Don't really know.
Last thing, maybe an important one but don't know why it would... I installed notify & fitness and sleep as Android for my mi band 4 and I noticed my phone getting slow during this period. About N&F it was on 12.27.2019.
The firmware was updated way after that issue... And of course I cleaned all app caches manualy, not using some weird app to do the job.
Sorry me for this long SOS, and please forgive my bad english. I'm starting to being crazy. OK, the phone works but oooh boy, Its slow.
Cheers

Your rom software is out of date. if you truly want the best experience on a daily basis. There is no doubt in my mind that Xiaomi.EU is still the absolute best experience overall.
It is light years better than the Global stock Rom, all of the bloat has been removed and it has some of the Pixel AOSP features integrated into the Rom. but yes it's still miui. For me that is a good thing because I am a fan. It sounds like you have never tried Xiaomi.EU so give it a shot. I guarantee, that if you keep it installed for a few days, you will not want anything else unless you are just bored. Wait until the new update comes out, it should be late today or tomorrow. by the way, you will average about 7.5 -8.5 hours SOT.
On the other hand, if you are content with Havoc, then migrate to the latest, Its pretty great but the battery SOT time is bad right at 4 hours. This can be improved by changing the kernel. I tested the LawRun_x5.0-60hz kernel and it improves SOT to 5.5 hours, and the OS gennnerally runs better. Other Roms are also good, but lack the abundance of features that Havoc has. A comparable heavily feature rich rom is CRDroid.
If you want to stay on your current rom, then clean your caches, and at least upgrade the kernel. That alone may be enough to improve your recent performance. i dont think you phone is going bad. You likely just have some corruption, or too many processes running in the background.

@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.

Erpe7 said:
@tsongming Hi and cheers for replying.
To start, I forget to mention that I'm using a global version.
That being said, I did clean all caches including from all my apps. Manualy of course.
I did use Xiaomi MIUI for very long time. Since I got my first Redmi Note 4. As you well said, I did switch to custom ROMs for what you said.
Regarding SOT... And the reason why I didn't update anything on my Mi8 its because with this version of havoc and this kernel. Gsam bat monitor tells me now : 9h41 (5h58 Max) and before my issue it was 11h !
So, to answer you : before asking here I also trying to update the Rev kernel but lot of things didn't work anymore. Like unlock the phone with my fingers and I think its pretty much normal as Havoc as evolved so kernel did the same and is not compatible with older version I think. At least, mine...
Honestly I tried lot of things to make my havoc super speed, smooth with a great battery and I was happy with that
I do hope I answered to all your questions.
I don't know what to do cause I'm not 100% sure that starting from clean MIUI or custom rom will fix it. What if not ? I'll "forced" to reinstall "everything" (I'm aware of backup apps but dont wanna use them) even if I saved all important stuffs
And if I badly revert to the last MIUI (I never reinstalled MIUI after a custom ROM. I know there is good tuto, but...) I could break it and I'll loose everything. For now it works, slowly OK ^^' but I rather that than taking a risk and found what is the cause of my problem.
Click to expand...
Click to collapse
The current version of Havoc already uses the Revolution kernel, and its part of the current problem so use something else. The Law kernel that I mentioned is extremely good. but so are the others latest release such as Mipa and Twisted. and no fingerprint issues with these kernels.
As a longtime user you do know that anytime you switch the kernel that you should remove all passkeys, screenlocks, face unlock etc.? This could explain the slowness, you have encryption issues.
Android 10 is much improved over pie, except for the battery 11 hours SOT is unheard of on Android 10. Except for 1 guy claiming 11 hours on the ION rom. I tried the rom and it is good. but I am only getting 7 hours Sot, and the Rom is like Lineage, just the basics. No fingerprint issues.
You truly need a full clean install, including formatting storage. just backup your files first.
Xiaomi Miui? Did you mean Xiaomi.EU? if not Xiaomi.EU , then you really should try it, you wouldn't know from a past experience. This is Miui 11 on Android 10 and its flawless.

thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the lastest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^

Erpe7 said:
thx again @tsongming
Yep, I note all what you said to me. But to be honest last year anytime I switched from kernels to kernels I never had to reset screenlock etc. Last year cause as I said once I found the kernel which suits me I stuck with it.
So I can state its note related to that cause I didn't change it since month trust me, just tried the last kernel one or week ago to be sure if it was the cause or not. Just installed and uninstalled apps since.
look at this screenshot you'll see what I meant about SOT which was better month ago. :/ Maybe I didn't explain well...
I'm not against trying any roms including xiaomi.eu perhaps (I do have links for this I think but any link is appreciated just in case. I just download the latest stable 11 from xiaomi.eu if its what you have in mind) but I want to be sure if it'll fix what I'm facing. You know ?
I'm afraid that doing a clean install with any rom won't fix my beautiful Mi8 ^^
Click to expand...
Click to collapse
You posted a question asking for help, but then you dont want to try anything because you tried things before. Yes, its true that Magisk is sometimes persistent, but it depends on the release. it is safer to remove the passkeys.
But if you really think about it, what would cause the phone to cool down, ignore the battery stats especially from Gsam it's often very wrong, I use it too, for years and in your case you are getting good SOT because you have a zero % for the phone. It's almost like a Sim card isn't installed? Every rom will provide extremely fantastic SOT when a sim card isn't being used. If you have an active sim card then something is wrong with the monitoring because Gsam is showing 0%, it should show something even if you havent made a phone call for days.
Do whatever you want it's your phone:
I still think that you have encryption or corruption issues and its bad enough for your to make a post about it. FYI : The battery dying doesnt slow down the phone. Yes, some stock roms, notably Apple intentionally by choice changed the kernel core settings automatically on aging batteries. Hence the huge controversy a couple of years ago, that isn't happening to you.
A dying battery doesn't slow down the phone, evn cold solder joints do not slow down the phone, they keep a phone from booting to system and to recovery. The only thing left is corruption or thermals, which on this phone good luck editing thermals because they are mostly encrypted. The remaining possibility is corruption, post your log files and lets see what's actually going on.
Again, what would slow down your phone even in recovery?
It's always thermals, or corruption. Slow to start up, even in recovery.: We can rule out thermals unless your battery temp or cores temps are extremely high. This leaves corruption. if its slow while booted into the system, then you may have apps or processes crashing and you are not aware of it. If that is true, then eventually the phone may stop booting up altogether. If its thermals causing overheating you should truly resolve this issue immediately before actual heat damage occurs. Did you ever flash display refresh rate mods? If so your DTBO partition could be the issue....corruption.
Use this program to provide an app list : https://play.google.com/store/apps/details?id=de.onyxbits.listmyapps ( Weed out any unknown programs that you may not realise are installed. Post the list along with complete logs. Once you see these crashes, that I am sure the logs will show: Do as I suggested earlier: wipe and "format" your phone. Then later use best practices and remove passwords before changing kernels

Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers

Erpe7 said:
Cheers. I'll try what you suggest.
I might have some questions in the future regarding format and some other things.
Never flashes display refresh rate and never noticed any overheat issue on my phone.
Sure, I'll do something like you said as soon as possible.
PS : you said "before remove passwords". You mean in the parameters of the phone like schema/diagram, pin, etc ?
Cheers
Click to expand...
Click to collapse
You could remove password under data/system/locksettings.bin But it's better to just go the settings//security/ *.* < remove whatever you have setup : prints and face unlock first before, pattern or pin.
Another good practice for Android 10, should you go there is :
Extract the boot image from the rom
Place it inside the downloads folder.
When ready to flash root, patch to the boot image first, ( this links the existing system binary credentials into the boot image)
Boot to recovery flash boot to boot
Then flash magisk > then boot to system and you will have no issues whatsoever with root.
Afterwards, if you decide to flash different kernel, Magisk is more likely to stay stay persistent.
I hope everything is good from this point forward take care.

@tsongming Thanks for reminding me the locksettings.bin thing because I used it once on my old phone and I forgot that.
Never installed 10 yet. But I take carefuly your advice.

Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP

I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk

ahmadbasher011 said:
I have that issues on my mi8
I had this problem with me before and I solved it by flashing the last official ROM, Now the problem happened to me again and I do not know what is the reason behind it @tsongming
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I recently had some issues with my phone as well. I was able to get my phone back to normal functioning by flashing the latest stable fastboot rom using the flashall.bat method. (dipper_global_images_V11.0.3.0.QEAMIXM_20200118.0000.00_10.0_global)
I kept everything stock for a few days even recovery, to ensure once that everything was back to normal.
Next I flashed the latest OrangeFox beta recovery, and I highly recommend the latest beta build over any other version of Recovery, it will decrypt when official Twrp will not. It is now more up to date than the LR Team version, and all of the bugs have been solved by DarthJabba. In fact, he even added a script to work around poorly designed startup scripts, which are suprisening not consistent between the wide range of custom roms for the Mi8.
Today, I am still using Orange Fox, ( OrangeFox-R10.1_002-Beta-dipper) and the latest stable Magisk. I no longer have freezing, unexpected shutdowns, slow starts, or poor battery life. My issue was without a doubt corruption, and bugs with the mid february version of Xiaomi.EU. The last 2 releases have been solid.

Since this weekend I face the same problem. Every action seems to bit slower than before. And I don't know what I did that resulted in this problem. The last thing I remember I installed was the new Miui12 live backgrounds. But I deleted them again.
I'm on stock since some weeks.
But I don't want to install everything from the beginning again.
Do you know how to solve the problem without wiping everything?
Edit: As I think about it, it seems as if the caching of the apps doesn't work as good as before and the killing of apps is too aggressiv.
But what did affect it?
Edit: I found the solution for my problem.
With Android Battery Historian was able to find the process that made the trouble.
It was the Miui wallpaper carousel app. After deleting it the problems were gone.

Erpe7 said:
Hi guys,
I'm a bit concerned about my mi8. Since several weeks now the phone is getting so slow to boot, even into recovery mode !
For exemple, today before starting to see the havoc logo spinning I count more than 20 spins. Months ago it took only 5 or 6, 2 weeks ago : more than 8... Etc.
When phone is started first apps tha usualy open really fast (Viper4fx, gsam battery monitor, magisk notifications) are so slow to open. Some other apps same thing the moment I open them.
Click to expand...
Click to collapse
it's a hardware issue and it's going to keep coming back, i spent the last two months trying to resolve it but i gave up.
it seems that UFS chip malfunctions on a lot of F1 and mi8 phones.

danielnavarrowo said:
Hello!
Did you fix it? Because it's happening to my Mi 8 too. It's exactly the same issue, the phone takes a long time to boot up, to open apps and even to boot into TWRP
Click to expand...
Click to collapse
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs

Erpe7 said:
Sorry for repling only now guys...
Thx to all who proposed to solve my issue, I will tell you what I did to fix my mi 8.
I did a crystal clean flash :
- downloaded & installed last miui image using miflash
- used "clean all" at the bottom right (be careful to not choose something else like "lock boot loader ")
- then you'll need to flash recovery (twrp), then format data by typing yes. Then copy from where you want your custom rom, flash it flash magisk and boot.
I did this several months from now and my phone is like just new!
No issue at all since.
I guess installing lot of different kernels like I did before must have broken something and hopefully this could help if you dont have more serious issues.
Ps: battery is more than ok and there is no hardware problem.
Thx again to Dexer125 for his help!
Sent from my dipper using XDA Labs
Click to expand...
Click to collapse
I can confirm this.
I have been unrooted on stock for a few months now and have had no problems since then.

Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards

roberbas said:
Hello, I have the slow issue (Androbench app with poor performances) after several dates when I have rooted my phone: Mi8 Chinese version with stock global ROM.
After unroot the phone, several days after, the phone works fine with Androbench app with good performances.
I need root my phone to use Magisk hide for Google Pay in order to avoid the Google block for contactless payment.
Can anybody help me about the understanding of this behaviour?
I do not know the reason why the phone is slow after root and why the phone works fine after several days after rooting.
Thanks in advance. Regards
Click to expand...
Click to collapse
Hi,
Mine has hardware issue (rooted).
Didn't try to unroot it if there is a difference like you describe.
Can't help you with magisk hide. I don't use it.

I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?

Irish_Dude said:
I have this issue with my mi 8 guys, just happened yesterday
So flashing the latest official rom via miflash is the way to fix it?
Click to expand...
Click to collapse
Hello, yes in my case. Sometimes, with wipe all, internal storage included, the problem it solved.
Recently I have the issue again without root: only with custom rom flashed. Several times the issue was reproduced out of my habitual site during vacances.
Thanks

Related

Problem with lockup / display not turning on across various roms, rooted droid

I successfully rooted my droid (that came with lollipop), using this guide
https://forum.xda-developers.com/droid-turbo/general/guide-how-to-unlock-bootloader-install-t3292684
installed twrp backed up the stock OS and installed resurrection remix lollipop rom. I did not install any different modems or radios as I planned to stay on lollipop.
Everything worked great yet after a day or two the display/phone would appear to lock up. I can press power, the display doesn't come on and when (usually) moving the the volume up/down I do hear sounds. Sometimes at this point it will reboot by itself, other times I have to reboot it.
When it comes up it goes through the android is upgrading thing, and sometimes works fine after, sometimes not, regardless eventually this problem repeats.
Thinking it was perhaps RR I tried straight Cyanogenmod, and eventually the rooted stock OS, both have this same problem.
I've tried using it with very minimal installed in the way of apps, same issue.
I've tried saving the log to SD to peer at later, but going through it I don't really see anything obvious to show what the problem is.
I"m wondering if there's a problem with the phone itself (it's a refurb) and am considering unrooting it and returning it.
Anyone seen this or thoughts on what might be the issue?
p.s.
if you happen to have a good link handy to an unrooting guide you might shoot it my way thanks.
thanks in advance!
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
There are ways to grab logs after a reboot, but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
thanks for the reply
ChazzMatt said:
What versions of the other ROMs did you use? Lollipop also, or Marshmallow? Nougat? For rooted stock ROM did you upgrade to Marshmallow? None of the Lollipop ROMs are supported anymore, so hard to answer for those.
Click to expand...
Click to collapse
I tried the last released CM lollipop snapshot, as well as the last nightly.
For RR it was last released, "ROM OS Version: 5.1.x Lollipop"
ChazzMatt said:
There are ways to grab logs after a reboot,
Click to expand...
Click to collapse
Yeh I've been saving it to the SD so I can view it after a reboot, I've looked at 4 or 5 of them after the problem occurred and at least to me nothing really stood out
ChazzMatt said:
but here's another suggestion...
I use Auto Reboot app (needs root) to schedule a reboot my phone every day while I'm asleep.
This seems to keep the cobwebs cleared out, so the phone runs better. I know you want to find the issue, but maybe it's an accumulation of apps not releasing RAM orb something. This might help prevent that.
Click to expand...
Click to collapse
Yeh I expect it might periodically need a reboot but if it's just unpredictiably locking up or rebooting on its own it's not very usable.
I think I'm just going to have to try to unroot and return, maybe I'll go with a LG V20 as I don't want to have pay to re-root another one of these and possibly have same issue. Also the whole pay to have some app do something secret to my phone does leave me a bit uneasy.
Kind of a bummer as I'm actually pretty impressed with this device, fast, good battery, takes nice photos, only drawbacks for me are no removable SD and lack of LED notification, but I was willing to live without those given how good everything else was.
thanks
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Android Version: 7.1.2
Current Rom: AOKP
Kernel: 3.10.107-Stock-bhb27-nougat-kerneL
MrN00b said:
Same here,
I tried with different Roms 7.X, still blocking and display not turning on.
I'd appreciate some help.
Thanks!
Click to expand...
Click to collapse
FWIW and in case it helps you or someone else, I seem to have fixed mine finally, here's what I did.
First I installed latest twrp (mod 4) https://androidfilehost.com/?w=files&flid=39562 (there's a thread on this twrp if you want tor read on it). That in itself didn't fix the issue but did finally let me format and got rid of an 'mkfs.f2fs: invalid option -- r, ERROR=1' type error I used to get.
I installed this stock zip from twrp as described in thread:
https://forum.xda-developers.com/droid-turbo/development/rom-su4tl-49-100-stock-t3390041
It would never actually boot it would shut my phone off not long after showing the boot screen, and I'm not sure if doing that was necessary or not.
Taking some suggestions from here:
https://forum.xda-developers.com/droid-turbo/help/help-request-custom-rom-phone-unlocked-t3767070
I dug up the last official CM 13 snapshot:
https://www.google.com/search?q=cm-13.0-20161221-SNAPSHOT-ZNH5YAO3Y5-quark.zip
sha1: 9a219dd487c27e51b0c5c4922812838f394099c5
Wipe and installed with no gapps and voilà it would boot consistently. Without reinstalling I tried installing pico gapps and it would still boot though it took maybe 15 mins initially.
I want Nougat so I wiped and installed lineage-14.1-20180612-UNOFFICIAL-quark.zip from https://forum.xda-developers.com/moto-maxx/development/rom-t3494646 again no gapps and it also booted fine, whereas previously it would hang on booting. Without reinstalling ROM I tried installing opengapps nano and it would just hang.
I could then no longer get it to boot again, so I reinstalled CM13 no gapps, which booted fine, wipe and install lineage-14.1-20180612-UNOFFICIAL-quark.zip no gapps, and now it boots fine though currently it's taking a while.
I should perhaps note I took twrp backups inbetween steps whenever I had a working boot, (ex before installing gapps), but once the phone went back to hanging on boot, those restores didn't help. Only reflashing CM13 seemed to clear things up.
My ultimate goal is a LOS ish Nougat/Oreo ROM with no gapps using microg, and running tmobile, I'll see what I end up with.

[SOLVED] How to fix the TW Oreo battery calibration issue.

so for some reason upgrading to oreo really messes up the battery calibration for me. at first, everything will be fine, but after a few reboots and using the phone, the battery percentage is everywhere. I'll plug my phone to charge and the percentage will rise as if it were seconds. I love oreo to bits, and I prefer it over nougat obviously. I used Odin to flash a stock rom, and still it's happening. anyone know what we can do to fix this? I know others here have the same problem.
EDIT (09/03/2019):
some people have mentioned ways to try and fix the problem, so I decided to make this a thread to try and find a solution to the calibration issue.
How can I participate?
You can participate by (briefly):
*submitting a solution you have found
*submitting an idea that may potentially work
*testing the fixes or ideas submitted
What else?
*solutions that are submitted are to be tested and confirmed if they work or not.
*ideas can also be tested, but at your own risk. make sure to make a backup of your current rom and storage if you don't want to lose anything.
*also submit what model you have (unless this applies only to the G610F model - we cant tell).
we can do this. I am tired of android nougat (android N doesn't have this issue).
EDIT (14/04/2019)
so, now that our phone actually recieved OneUi, theres no point for this thread android Pie doesn't have this problem, which is fantastic. thanks for those who contributed!
ill keep this thread around in case there are some bois out there who still prefer oreo for whatever odd reason.
but honestly tho, oneui is perfect.
PEACE!!
EDIT 13/05/2019
SOLVED!! (FINALLY)
right now im running oreosama rom, with no issues, no problems at all - i have (accidentally) found the solution to this battery problem!
the solution is very simple - download a stock oreo rom from sammobile or updato, and then flash its bootloader with odin. the battery calibration issue occurs cause the bootloader is still based on nougat. that issue goes away once you upgrade.
there you go folks - happy oreo flashing!!
lor3tz said:
so for some reason upgrading to oreo really messes up the battery calibration for me. at first, everything will be fine, but after a few reboots and using the phone, the battery percentage is everywhere. I'll plug my phone to charge and the percentage will rise as if it were seconds. I love oreo to bits, and I prefer it over nougat obviously. I used Odin to flash a stock rom, and still it's happening. anyone know what we can do to fix this? I know others here have the same problem.
Click to expand...
Click to collapse
I have the same problem after an OTA update.
officially from samsung?
Try to use Battery Calibration app on CHPlay of SuperThomasLab, read instruction and follow that, i am in TW Oreo and my battery is OK although it stills rarely mess up
I have this problem and I don't know why. I have Android 8.1 official
I had the same problem but .. its gone after flashing oreosama rom and in other TW roms that supports USSD CODES (including the stock) I used *#0228# and it worked everything was ok
Can you give more details?
AhmedKhamis67 said:
I had the same problem but .. its gone after flashing oreosama rom and in other TW roms that supports USSD CODES (including the stock) I used *#0228# and it worked everything was ok
Click to expand...
Click to collapse
i could give this a try. im desperate to get my phone fixed lol.
AhmedKhamis67 said:
I had the same problem but .. its gone after flashing oreosama rom and in other TW roms that supports USSD CODES (including the stock) I used *#0228# and it worked everything was ok
Click to expand...
Click to collapse
so I updated the post. anyways, I tried your idea. I downloaded oreosama and used the ussd code. I thought everything was fixed, then suddenly it gave the usual problems. so your solution did not really work. is there any way we could like port the nougat battery files over to oreo?
If you try to delete battery.bin?
Maybe it would help you.
Drain to 0% and charge your phone to 100%. While plugged in, dial *#0228# and press 'Quick Start'. It would be better if you are on stock ROM. Do it 1 or 2 times and you are good to go. Works like charm for me.
do i dial the ussd code once the phone has reached 100%? how do i know if theres a battery calibration issue?
Beytullah61 said:
If you try to delete battery.bin?
Maybe it would help you.
Click to expand...
Click to collapse
somebody test this
lor3tz said:
somebody test this
Click to expand...
Click to collapse
It worked on my phone.
I think you need to replace the battery with new one
Before doing make sure battery is at 100%
1. Go to root/data/system.
2. Delete all the files which have a name that starts with battery.
3. Delete the Dropbox folder.
4. Reboot to TWRP.
5. Go to Wipe -> Advanced Wipe. Choose dalvik and cache partitions and then wipe them.
6. Reboot and check.
For TWRP and root users ..
op post edit~
guys, ive finally fixed the problem. check the OP to see how!
Help, all of your methods are not work on my phone. My phone is charged too quickly to 100% and after restart the battery is draining to 10%.
did you upgrade the bootloader to Oreo?
lor3tz said:
did you upgrade the bootloader to Oreo?
Click to expand...
Click to collapse
Yeah.

[Discussion] Resurrection Remix 7 for Hammerhead (Android 9 Pie)

Hello everyone. I am opening this thread for the sake of convenience of us users of this ROM so that we stop hijacking the Oreo version thread and have a "clean" place where we can discuss about our experience with this great ROM. So I suggest anything regarding this ROM to be posted here!
You can find the official builds here: https://get.resurrectionremix.com/?dir=hammerhead
DISCLAIMER: I am by no means a developer or maintainer of this ROM, so this cannot be considered an official support thread, just conversation, plain and simple! Moderators can close this thread as soon as an official support thread opens.
Cheers!
I just installed the rom,came from stock. My first impressions are:
-It took 2 reboots to get the camera working. Installed google camera app since the integrated one doesnt show up on app drawer(you can access it from lockscreen though) and it seems to work kinda bad(picture goes black on it sometimes).
-It runs a bit hotter than stock rom. It might be just me though,I have opened the phone a few times to fix the power button which seems to get stuck for me once in a while.
-The default DPI doesn't seem right,everything looks a little bit smaller than it does on stock rom. There is an option to change it though, I set mine to 380 and it looks about right.
I haven't found any other issues yet.
Another note,I think the rom fixed my notification led lol. It didn't work for me on stock rom for some reason.
Pretty good rom overall,I haven't faced any stability issues yet.
edit: Is there any way to lower the resolution?
I upgraded from RR's Oreo build. Before flashing I repartitioned the phone using the method described here and the even more detailed instructions posted by douguluskaien on page 12 of that thread. The flash went very smoothly and although the phone initially ran hot it cooled back to normal after a few hours of what was probably background processing. With the 1.5G system partition I was able to install the micro version of GAPPS. I've had that experience after flashing new ROMs on other phones as well. I also discovered the bundled camera doesn't work and installed Google Camera. After starting up Google Camera, the original camera worked also. I tried connecting bluetooth headphones, and even though I could pair the headset I couldn't get the phone to send audio - it just kept playing through the phone speaker. I also found the default font size a little small, but changing it to Large in the Font Size menu got it back to what seems like normal.
I have one major issue which I realize is not directly related to the ROM. A custom version of TWRP is required to support the non-standard partitions, and that version is based on TWRP 3.2.3 and doesn't support device encryption. Does anyone know if an updated TWRP will be available that will allow me to encrypt the phone and still do recovery-related stuff?
In summary, this is impressively well along for a build that's only been live for a couple of weeks. This isn't my daily driver so I don't need absolute stability, so this is plenty for me for now. I just won't leave the house with it until I can encrypt.
I've been using this ROM for about a month now as a daily driver, so here's my feedback:
ROM is very nice and smooth and feature rich (as expected for RR). I installed it with Opengapps nano, rooted with Magisk. It works very well with the Pixel launcher I grabbed from here.
Some drawbacks I noticed:
Battery life is rather bad. I get 1h30m SOT at best with very mild usage (mostly site browsing and a little bit of social apps and YT video watching) . Then again I am still using the 5yr old battery that came with the phone...
The phone runs very hot (too hot to hold!) after using it for some time. It cools down rather fast if you let it be for a while, though.
Sometimes the camera is crashing (the notorious "can't connect to camera" error). usually a reboot fixes this.
Sometimes it takes a while for the device to wake up after pressing the power button.
I got some soft reboots under device heavy load. Mostly I get them when using the Rocket player music app, and it tries to load a large music folder. Phone freezes, then soft reboots.
SElinux is set to permissive and the build is signed with test keys. Maybe the first thing is caused by the latter, I don't know really....
Overall, it is a good ROM with room for improvement. However, I am concerned about its maintenance status. No update since May 14, so I keep my fingers crossed.
New build (28/07) uploaded!
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
I am not able to install it giving me ERROR 7
hammerheadache said:
New build (28/07) uploaded!
Click to expand...
Click to collapse
Do you know about change log??
What features added?
I want to update it tonight
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
m.morcielago said:
Do you know about change log??
What features added?
I want to update it tonight
Click to expand...
Click to collapse
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
I flashed this build this morning by dirty way
Unfortunately Bluetooth is not working
It can find the other devices but can not connect to them
1- How can I fix it?
2-How can I downgrade to previous build?
hammerheadache said:
As I state at the first post, I am not a developer, neither I have any involvement in this project and the people behind it. So I can't provide any support apart from my experience as a user.
I didn't flash this build so I don't know if it works or not. I have switched to a different ROM. However, could you elaborate? Do you come from another ROM? Did you dirty flash? Is your device repartitioned? Usually error 7 in TWRP means there's not enough system space...
I do not see any changelog file on the download page. Unfortunately with no official support thread, there are no official answers as well...
Click to expand...
Click to collapse
Thanks for the idea, I had just repartitioned, so I had format my entire phone, (before that i had taken the backup ), and I had successfully installed the rom, I got an strange issue of WIFI connectivity, as I am not able to connect to my wifi which is having Hidden SSID, but i am successfully connected with the hotspot from my another primary phone. i haven't tested the bluetooth yet.
I dirty flashed the new build this morning. Haven't tried bluetooth or camera yet, but Wifi is working fine. As usual, the phone heated up for about a half hour after the flash and then the temp dropped and stabilized. Battery life is not great, like the May build, and there is often a long delay responding to the power button, especially shortly after power-up, but the build seems pretty solid.
Casting isn't finding anything to cast to in the most recent build. Camera worked fine.
New build available (Aug 4) as seen at ROM's dl page.
Bluetooth pairing now working for me on last release
Hi installed this ROM in clean maner but i got intermitent issue with sim card. Not sure if it is only sim issue or reboot but phone ask my pin code.
Looks like @voidz777 is the maintainer for RR Pie as well:
https://github.com/ResurrectionRemix-Devices/api/commit/8388c5df5069cf04df04facbdc22a2bfd8890185
New build (09/08) in case someone missed it... Link in OP
sacmat said:
I am not able to install it giving me ERROR 7
Click to expand...
Click to collapse
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
New build (Sep 16) available! Link in OP.
princeknockouts said:
okay so to fix this you will have to repartition your system.
This thread will help you. https://forum.xda-developers.com/go...ment/repartition-nexus-5-repartition-t3844395
Repartitioning is the fix to error 70 while flashing gapps as well as error 7.
Click to expand...
Click to collapse
Thank you for the tip, I followed the thread and was able to install RR 7 without any trouble. This might not be the right place to ask, but would you have any info on how to install SuperSU on RR 7, or is there perhaps another root method that we must use? Thanks in advance, I can't seem to find information on it anywhere and rather than continuing to bang my head against the wall I thought I'd ask.

Just ordered razer phone 2 looking for custom os instructions.

So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
SynGreis said:
So from what i gathered TWRP doesnt work yet on the razer phone 2 and lineage os doesnt have a build for this phone yet i gotta ask what is available for modding razer and what is the step by step to make that happen. i seen some instructions but other than root there isnt much to do.
Click to expand...
Click to collapse
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
which one do you suggest? i dont see much of a selection.
SynGreis said:
which one do you suggest? i dont see much of a selection.
Click to expand...
Click to collapse
Right now there really aren't any, although there are a few in development, such as AOSP. I think the initial high price, specialized hardware & relative unpopularity has not helped attract any serious development.
I've noticed that ROM development has decreased significantly in the last few years. I remember the days of the Samsung Galaxy Nexus & the HTC Evo 4G where it seemed as if there was a new ROM released every week. I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult.
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
mattwheat said:
Cancel your order. Get your money back. This phone while it is awesome at gaming and has a great screen. The OS is ****ty to say the least. I have had more issues with it freezing up. Not wanting to download apps from the play store. Not allowing me to install apps that I have already downloaded on my device. Now it's showing up as the Asus Rog II. This phone is the biggest heaviest piece of **** I've ever had. I promise you if everyone knew the issues this phone has you couldn't give it away free.
Click to expand...
Click to collapse
Mine showed as in rog 2 the last time I reloaded the OS. It's because it searches for "phone 2" and randomly guesses. No biggie, just fix it in the settings. No issues here from playstore, if you do it's common on every Android phone and fixable by clearing the data from the app. Maybe you should reflash the stock firmware? I don't see why you would call this phone ****ty. It's basically running AOSP stock except some theming from Razer. I fixed some freezing issues by reseating the Sim and SD card that I have. This thing rocks, just saying.
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
matt that might be just you i havent experienced any issues with this phone whatsoever.
"I think its because (a) recent Android operating systems are offering greater customization out of the box, & (b) with the new A/B partitioning scheme, it makes ROM development more difficult."
can you provide more info on this A/B partition? id love to see what customizable stuff i can do with this.
mattwheat said:
I've cleared the play stores cache, data, and dalvic in every method imaginable. Even google play services. I've restored backups, flashed stock .imgs, and flashed the stock odex Ron and the deodexed rom. It doesn't start failing to install play store apps till after I initially install most the apps I normally use then a while later when I think of one I forgot I'll go and try to install. That's when it starts messing up. If I watch a video threw some websites built in player on the webpage I'm viewing... about 15 to 20 seconds into the video everything but sound freezes. And will not correct itself. I have to hold the power button till it reboots. Only videos I can watch without issue is from the YouTube app. It's ridiculous. I've unlocked, rooted, and crack flashed tons of roms on all of my pixel and Nexus devices without any issue besides the random freeze. Which can be quickly fixed by toggling the screen on and off. This **** is ridiculous. So over this phone.
Click to expand...
Click to collapse
The freezing is due to a bug in Google Chrome. All you have to do to fix this issue is roll back the app version to 72 because version 76 doesn't work on our RP2.
Edit: uncheck auto update
Only freeze I had so far was with the infamous switch switch to the tele lens. Not a single other issue with software.
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
MasterThiefGarrett said:
Other question, if you put the display at 120hz, and you scroll something, does it 'feel' like your finger sticks to text/icons?
I mean, is there no delay like you normally would have at 60hz?
On the Oneplus 7 Pro the 90hz is already a big improvement (less delay) but 120 should really be kickass... anyone?
Click to expand...
Click to collapse
Take this with a grain of salt, as I just got the RP2, but its the most responsive, "sticky" feeling Android phone I've used. 120hz is like night and day to me.
On a related note, Firefox Fenix with webrender enabled feels significantly more responsive than Chromium atm, as it seemingly renders the whole page instead of stuttering as you scroll like Chrome.
JDBarlow said:
TWRP works just fine on this device. It's installed when you fastboot flash arter97 kernel and it works perfect. He just updated it to r10. Good luck!!
Edit: as far as ROMs look around in this forum you'll find a couple of different ones in the same section as arter97 :good:
Click to expand...
Click to collapse
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
SynGreis said:
how can you get twrp in? Everytime i try to flash twrp in i get stuck at powered by android logo.
Click to expand...
Click to collapse
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
duplicate post
JDBarlow said:
Which version of Android are you running currently?
MR1 will be arter97 r11
MR2 will be arter97 r12
http://arter97.com/browse/aura/kernel/
Click to expand...
Click to collapse
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
SynGreis said:
i havent flashed either of those arter because im worried that its gonna screw things up again.
Im sitting on the 9.0 MR1 stock image from razer.
https://developer.razer.com/razer-ph...actory-images/
Click to expand...
Click to collapse
So are you on the global version? If so let it update to MR2 and fastboot flash boot arter97 r12 and you'll be just fine.
Which version are you running then to get stuck on boot logo?
Edit: if you want to stay on MR1 then flash arter97 r11
i tried updating to mr2 but says installation failed.
all i do is
faatboot flash boot kernal.img?
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
JDBarlow said:
I just rooted MR2 to show you. It took me less than 5 minutes to do the whole process of fastboot flashing kernel booting straight into TWRP recovery which is included then installing magisk immediately rebooting into system and updated magisk. Done
Click to expand...
Click to collapse
My only question is, which version zip of magisk did you use in TWRP to flash? 20 or the latest beta? I'm rooted now with a modded boot.img that someone else used the canary/latest beta. Just don't want to screw myself and end up having to flash mr1 again then taking the update.

Question Weird behavior on 2 different ROMs

Hey,
I got my Pixel 7 last week and installed Graphene OS on it, however after some days I noticed it behaved very strange.
No buttons on the phone worked anymore, neither the power nor the volume buttons. After I did a full reboot the buttons worked again, but then the fingerprint scanner is not available anymore?!
As i very much like to have both, the buttons and the finger print, working I did a factory reset and installed LineageOS. But now I have the same beavior again after 2 days with the new ROM.
Did anyone experiences something similar already? Do you think this is a hardware issue? Can I still get a replacement if I already unlocked the bootloader and tinkered around with the OS on the phone?
Sounds like a hardware issue. Although its a bit strange that it would affect either the fingerprint sensor or the buttons. Could you describe what goes on with the fingerprint sensor in more detail?
Well the fingerprint hardware is simply not available, conpletely gone from the settings, doesn't show up on the lockscreen, like it doesn't even exist on the device.
If I then reboot the hardware is available again but the whole OS is super buggy, the buttons don't work and the phone will soft reboot after a few minutes.
Before you call it a hardware issue why not flash back to stock and verify. Most likely a rom issue and I'm sure the other rom pulls from the lineage source, most do. Would also explain the issue persisting on two different roms.
Yeah I will try it but the Android flash tool failed on me on 2 seperate machines. So now I habe to do it manually with adb it seems.
But even if the Stock ROM works, it's still weird, as nobody else reporting on this.
elba96 said:
Yeah I will try it but the Android flash tool failed on me on 2 seperate machines. So now I habe to do it manually with adb it seems.
But even if the Stock ROM works, it's still weird, as nobody else reporting on this.
Click to expand...
Click to collapse
I seem to recall a problem with fingerprint disappearing from screen and settings like you described. I think it was in the Pixel 6 forums months ago. I don't remember any details.
It's not unusual to lose certain functions with a custom ROM but the button problem is definitely unusual. Whether it's software or hardware, if you can reproduce at least one of these problems with stock Android then I think you have your answer. And as long as factory firmware is installed, bootloader is locked and you factory reset it, you should be ok returning the phone for repair or replacement.
Thanks for the answer!
Today I finally had the time to flash a factory image. After rooting and restoring all my apps the issue reappeared after about 20 min. on the stock rom it was even more severe. Now I uninstalled magisk and flashed the stock init_boot.img file and until now it seems fine.
Can the patched boot image cause the problems described above, or even an unlocked bootloader?
elba96 said:
Can the patched boot image cause the problems described above, or even an unlocked bootloader?
Click to expand...
Click to collapse
If these problems are caused by bootloader unlocking or rooting stock Android I think the same would've happened to other people by now and it would have been mentioned.
Regarding the bootloader, was GrapheneOS fully erased? In particular its verified boot key.
GrapheneOS CLI install guide
Command-line installation instructions for GrapheneOS, a security and privacy focused mobile OS with Android app compatibility.
grapheneos.org
If that's not it, or something similar leftover from Lineage, I think you should forget any modifications long enough to reproduce your problems in the phone's factory state. Just run flash-all.bat (or bash equivalent) and let it wipe, lock the bootloader, install updates and use the phone. Time consuming, I know. But if there are hardware issues one or both problems may show up again and it's less of a mystery.
manjaroid said:
Regarding the bootloader, was GrapheneOS fully erased? In particular its verified boot key.
Click to expand...
Click to collapse
Thanks for the notice, I forgot about this!
So far the stock rom without root performs ok, no problems. It just sucks to not have all the customizations I'm used to for the last 10 years...
Maybe try not restoring any apps and see if it still persists.
manjaroid said:
If these problems are caused by bootloader unlocking or rooting stock Android I think the same would've happened to other people by now and it would have been mentioned.
Click to expand...
Click to collapse
@elba96
Maybe it's too soon to dismiss Magisk patching as the problem. You might try Magisk stable 25.2 or canary 25206 if you've been patching with one of the newer 26.x releases.
I'm starting to suspect my patched boot image may be the cause of a new problem on a Pixel 5. Either that or it's a new Android bug.
My problem is similar to one of yours: a lost function combined with a disappearing setting. SmartLock hasn't worked right since the April update a couple days ago. When I check its settings all three SmartLock options are gone. Rebooting brings them back and I'm able to get SmartLock working again. The problem seems to repeat when the phone goes idle and locks down.
By now I'm pretty sure it was the patched boot image. Until now (2 days) the stock ROM doesn't show any bugs.
And now that you say it. I used Magisk 26 for the patching as it rolled out right when I was setting up my phone. Should have stayed with v25.x it seems.
I'll give it 1 or 2 days more just to be sure and then I'll try it with Magisk v25.x again.

Categories

Resources