I tried to perform a factory reset from TWRP cause it wouldn't let me from Configuration>Reset and Restore (or something like that), and after a reboot system didn't launch, it said something about an encryption problem, so I decided to restore a system backup I did and now my phone is stuck in bootloop. Someone can point me in the right direction? Thanks in advance.
Yzakz said:
I tried to perform a factory reset from TWRP cause it wouldn't let me from Configuration>Reset and Restore (or something like that), and after a reboot system didn't launch, it said something about an encryption problem, so I decided to restore a system backup I did and now my phone is stuck in bootloop. Someone can point me in the right direction? Thanks in advance.
Click to expand...
Click to collapse
We're you on stock Orero, Pie? Or one of the custom Pie, Q ROMs?
Ainz_Ooal_Gown said:
We're you on stock Orero, Pie? Or one of the custom Pie, Q ROMs?
Click to expand...
Click to collapse
Stock Pie
Yzakz said:
Stock Pie
Click to expand...
Click to collapse
Yeah TWRP and Stock are at odds with each other.... You must fallow the guide to make TWRP and Stock compatible with each other when restoring.... alternatively you can try to flash one of the custom ROMs and see if it boots.
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
This guide specifically https://forum.xda-developers.com/lg-v40/how-to/guide-twrp-data-access-stock-t3970149
Ainz_Ooal_Gown said:
Yeah TWRP and Stock are at odds with each other.... You must fallow the guide to make TWRP and Stock compatible with each other when restoring.... alternatively you can try to flash one of the custom ROMs and see if it boots.
---------- Post added at 11:55 PM ---------- Previous post was at 11:51 PM ----------
This guide specifically https://forum.xda-developers.com/lg-v40/how-to/guide-twrp-data-access-stock-t3970149
Click to expand...
Click to collapse
I tried with LineageOS but no luck. In fact, I tried to install LineageOS before I had this problem and even when TWRP said "Success", the phone booted into stock pie rom
Yzakz said:
I tried with LineageOS but no luck. In fact, I tried to install LineageOS before I had this problem and even when TWRP said "Success", the phone booted into stock pie rom
Click to expand...
Click to collapse
Did you switch slots?
Ainz_Ooal_Gown said:
Did you switch slots?
Click to expand...
Click to collapse
When? When installing LineageOS? To be honest right now I don't remember exactly what I did, but I'm 100% that I followed the write-up in the TWRP thread step by step.
Which slot should I select to install a custom rom?
Yzakz said:
Which slot should I select to install a custom rom?
Click to expand...
Click to collapse
When you install a ROM made for the V40 if your on Slot A when you boot into TWRP then the ROM installs in Slot B and if on B the it installs into A. But gapps and other flashable zips install into the current booted slot.
So flashing steps would be
1. Boot TWRP
2. Check which slot your on in the reboot menu
3. Flash ROM
4. Flash the TWRP recovery IMG. To ram disk
5. Go to reboot menu and select opposite Slot
6. Select reboot recovery and swipe to reboot
7.flash anything else gapps etc.
8. Reboot into your new working ROM.
Ainz_Ooal_Gown said:
When you install a ROM made for the V40 if your on Slot A when you boot into TWRP then the ROM installs in Slot B and if on B the it installs into A. But gapps and other flashable zips install into the current booted slot.
So flashing steps would be
1. Boot TWRP
2. Check which slot your on in the reboot menu
3. Flash ROM
4. Flash the TWRP recovery IMG. To ram disk
5. Go to reboot menu and select opposite Slot
6. Select reboot recovery and swipe to reboot
7.flash anything else gapps etc.
8. Reboot into your new working ROM.
Click to expand...
Click to collapse
I thought I did that, but when I rebooted the phone it booted to the stock Android rom
Yzakz said:
I thought I did that, but when I rebooted the phone it booted to the stock Android rom
Click to expand...
Click to collapse
My guess is you didn't select reboot recovery and instead hit reboot system...
Related
OK guys hi... I somehow managed to wipe everything from the phone.I mean everything.The phone boots au to the screen with the ''unlocked bootloader'' warning.Then nothing.if i press power button and hold volume down i can use the recovery menu and i can go to the TWRP menu.From there i cannot use the MOUNT>USB OTG option so the phone is not recognized from my windows.
The only option i see available is installing something from my SD card.But i have no idea what or how or if there's a way i can install again the original android files.When i try booting it says there is no OS.
Is there a chance fellas.?
The fact you have somehow wiped your phone I dont think you can recover any lost files but you can at least still use the phone. Try flashing stock, if you are unable to do this put a custom rom on the sd card and try flashing that.
stonedpsycho said:
The fact you have somehow wiped your phone I dont think you can recover any lost files but you can at least still use the phone. Try flashing stock, if you are unable to do this put a custom rom on the sd card and try flashing that.
Click to expand...
Click to collapse
Yes i definitely cant recover anything i've wiped out.I will try anything you say i just don't know where i can find a custom rom or a stock one.Can you please give me a link.? i have the 2014 moto G XT1072.
Albilosha said:
Yes i definitely cant recover anything i've wiped out.I will try anything you say i just don't know where i can find a custom rom or a stock one.Can you please give me a link.? i have the 2014 moto G XT1072.
Click to expand...
Click to collapse
I would recommend trying to flash the stock image first. I am unsure of what country you are in, the link below is for the UK filmware:
http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-firmware-uk-gb-t3337916
This also has the steps needed to flash the stock image.
You can flash a custom rom though if you wish. I have only flashed Cyanogenmod13 so I can not recommend a different rom although CM13 is brilliant.
to download CM13- http://download.cyanogenmod.org/?device=thea
for Gapps (choose ARM/6.0/ then I choose the pico but you can choose what you want- http://opengapps.org/
Once you have put them on the sd card flash cm13 then gapps straight after then just reboot, done.
Take your Sd card out to an other phone or card reader then copy the ROM and flash it
stonedpsycho said:
I would recommend trying to flash the stock image first. I am unsure of what country you are in, the link below is for the UK filmware:
http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-firmware-uk-gb-t3337916
This also has the steps needed to flash the stock image.
You can flash a custom rom though if you wish. I have only flashed Cyanogenmod13 so I can not recommend a different rom although CM13 is brilliant.
to download CM13- http://download.cyanogenmod.org/?device=thea
for Gapps (choose ARM/6.0/ then I choose the pico but you can choose what you want- http://opengapps.org/
Once you have put them on the sd card flash cm13 then gapps straight after then just reboot, done.
Click to expand...
Click to collapse
Tried flashing both stock and CM and it failed.How can i check what version Moto G do i have since the UK firmware doesn't seem to work..
here are some pictures of the message i get while flashing
http://s33.postimg.org/h374o1x0v/DSC0760.jpg the stock one.
http://s33.postimg.org/lmx5esj1r/DSC0764.jpg CM.
Albilosha said:
Tried flashing both stock and CM and it failed.How can i check what version Moto G do i have since the UK firmware doesn't seem to work..
here are some pictures of the message i get while flashing
http://s33.postimg.org/h374o1x0v/DSC0760.jpg the stock one.
http://s33.postimg.org/lmx5esj1r/DSC0764.jpg CM.
Click to expand...
Click to collapse
The stock image is not for flashing in recovery, you need to flash it with "mfastboot" on a pc using command prompt.
It seems CM13 will not flash as I take it you were still on Lollipop?
I will PM you steps on how to use mfastboot.
stonedpsycho said:
The stock image is not for flashing in recovery, you need to flash it with "mfastboot" on a pc using command prompt.
It seems CM13 will not flash as I take it you were still on Lollipop?
I will PM you steps on how to use mfastboot.
Click to expand...
Click to collapse
ok thank you.the problem is that PC does not recognize the device.Even in Device manager the device appears as a MTP usb device.So i wonder how will i use fastboot damn i thing im doomed
Albilosha said:
ok thank you.the problem is that PC does not recognize the device.Even in Device manager the device appears as a MTP usb device.So i wonder how will i use fastboot damn i thing im doomed
Click to expand...
Click to collapse
Just sent you a PM
Albilosha said:
OK guys hi... I somehow managed to wipe everything from the phone.I mean everything.The phone boots au to the screen with the ''unlocked bootloader'' warning.Then nothing.if i press power button and hold volume down i can use the recovery menu and i can go to the TWRP menu.From there i cannot use the MOUNT>USB OTG option so the phone is not recognized from my windows.
The only option i see available is installing something from my SD card.But i have no idea what or how or if there's a way i can install again the original android files.When i try booting it says there is no OS.
Is there a chance fellas.?
Click to expand...
Click to collapse
If you can already enter TWRP then just download a Thea CyanogenMod firmware and Pico Gapps for Android 6.0. Then flash the CM ZIP and then the Gapps ZIP and then restart in normal mode.
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
And one thing more. If you flashed TWRP for titan (XT106X) flash it for thea if your phone is XT107X. Then try to flash a XT107X Cyanogenmod firmware.
benjausen said:
If you can already enter TWRP then just download a Thea CyanogenMod firmware and Pico Gapps for Android 6.0. Then flash the CM ZIP and then the Gapps ZIP and then restart in normal mode.
---------- Post added at 06:47 PM ---------- Previous post was at 06:45 PM ----------
And one thing more. If you flashed TWRP for titan (XT106X) flash it for thea if your phone is XT107X. Then try to flash a XT107X Cyanogenmod firmware.
Click to expand...
Click to collapse
With help i managed to restore the phone to default android and then flashed the latest twrp and cyanogenmod 13.Thank you all guys
Close please.....
Boot into twrp and Flash twrp AGAIN (install-select img- Recovery).
Click to expand...
Click to collapse
I don't quite get what this means - please make it more thorough.
RJMacReady said:
I don't quite get what this means - please make it more thorough.
Click to expand...
Click to collapse
just flash twrp .img file with fastboot command
After I flashed the rom, mounted system normally and flashed magisk, etc. I booted into system, rebooted into FASTBOOT and re-flashed TWRP but it just leaves me at a black screen.
RJMacReady said:
After I flashed the rom, mounted system normally and flashed magisk, etc. I booted into system, rebooted into FASTBOOT and re-flashed TWRP but it just leaves me at a black screen.
Click to expand...
Click to collapse
hold power button for 15 sec boot the phone tryaguin
If that doesn't work, are you gonna recommend redoing the entire process over?
RJMacReady said:
If that doesn't work, are you gonna recommend redoing the entire process over?
Click to expand...
Click to collapse
i do it myself just let the os boot then reboot in fastboot and flash twrp
---------- Post added at 03:10 PM ---------- Previous post was at 02:30 PM ----------
RJMacReady said:
If that doesn't work, are you gonna recommend redoing the entire process over?
Click to expand...
Click to collapse
hi flash the new twrp the old one is not working
im tested is working
Twrp working on 3.5.2
RJMacReady said:
I don't quite get what this means - please make it more thorough.
Click to expand...
Click to collapse
i mean first install twpr vie fastboot.
then reboot into twrp.
then you can go to install (in twrp) and then you can select "select image" then you can choose your twrp.img and flash it on recovery partition
to go the safe way
Because i experienced that i flashed twrp via fastboot and when i boot the system, the stock recovery was flashed again.
RJMacReady said:
After I flashed the rom, mounted system normally and flashed magisk, etc. I booted into system, rebooted into FASTBOOT and re-flashed TWRP but it just leaves me at a black screen.
Click to expand...
Click to collapse
Can you boot into system?
or do you get the op3 logo and then black screen?
upps, sorry for posting two comments, my fault :c
Edit: if you have black Screen at Recovery Boot you must Flash twrp 3.0.2.19 from another thread
I think "how to dirty Flash........"
Hi everybody,
I have a probleme with my OP3T.
I have upgraded the OS from 3.5.4 to 4, but I don't succed to root the phone, mainly because of the TWRP (flash with 3.0.3.0) that doesn't access to the SD card (twrp asks a password I don't have, so that stay encrypted).
When I try to follow this guide, I always have an error with the recovery stock (recovery downloaded from the oneplus support) during the sideload step (I also try to dowload the rom with twrp, but no success...)
So my question:
Does someone can help me to come back to 3.5.4 until twrp is supported by 4.0 ?
Thank you very much
I'm in the same boat. When sideloading 3.5.3 ota it fails after approximately 45%.
I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.
Okay, my solution was to: 1. boot up in fastboot mode 2. Disable encryption by opening a command prompt in administrater mode and type fastboot format userdata. 3. Install 3.5.3 from Twrp.
Not ideal to disable encryption but now I got a working phone
---------- Post added at 04:59 PM ---------- Previous post was at 04:54 PM ----------
djseban2 said:
I had the same problem. Steps I did in order to make phone functional:
If you don't have TWRP, you have to install it.
Then, you should wipe your phone entirely from TWRP (Factory Reset, Format Data, Advanced Wipe->Dalvik/ART;System;Data;Internal Storage).
Reset the phone and enter TWRP once again.
Copy the official ZIP with OOS 3.5.x ROM into phone's memory, then flash it.
Flash SuperSU, otherwise your phone won't boot.
I don't take any responsibility, in case you mess something up with your phone.
Click to expand...
Click to collapse
Thx. I might have forgotten to reset the phone after wipe, before installing 3.5.4 which is why it wouldn't install even from twrp. My solution worked though - encrypting it again will be for another day. Sick of geeking
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Yes, it's entirely possible, but what's the point? You can flash stock recovery->lock bootloader->sideload OOS 4.0, and you are stock . From what I've read, not everyone got 4.0 through OTA yet.
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
white43 said:
So once you have working 3.5.3/4 can you return it to stock - I mean by relocking bootloader and reflashing stock recovery? So then to receive 4.0 via OTA?
Thanks
Click to expand...
Click to collapse
Do you have a link for the stock 3.5.X recovery? Link from O+ download section won't work..
They provide the so-called Oxygen Stock REC for OP3T here: downloads.oneplus.net/
But I always got different MD5 after downloading the img they provided.
spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.
uttam.ace said:
Hey I am in same boat, does TWRP version matters to return from 4.0.2 to 3.5.3.
I have TWRP(3031) and SU 2.79. I want to revert for battery as well xposed.
Click to expand...
Click to collapse
It will work with 3.0.3-1 TWRP but you have to flash the ROM twice because of filesystem and put the files twice on the internal memory. Reboot recovery twice forced.
I think TWRP 3.0.4.0 should work better but I do not used it on my phone to restore from 4.0.2 to 3.5.4 so you could try and let us know
---------- Post added at 06:35 PM ---------- Previous post was at 06:32 PM ----------
https://forums.oneplus.net/threads/how-to-restore-to-3-5-4-from-4-0-2-on-op3t.493963/
I made this but you can flash it at your own risk.
To me it worked.
And another tutorial I found but not tried is here https://forum.xda-developers.com/showpost.php?p=70310185&postcount=308
Oneplus 3T downgrade bootloader locked
Hello everyone!
I have a OP3T locked by frp and android nougat oxygen 4.0.3. Is there any solution to downgrade the android to oxygen 3.x??
Thank you guys,
Cheers!
spida_singh said:
Do you have to be on a specific version of twrp to do this? I cant flash 3.5.4 back using the latest twrp (3031)
EDIT
Never mind all OK, was just begin inpatient
Click to expand...
Click to collapse
I tried using TWRP 3.0.4.1,
I was able to flash. thing is, while flashing zip in twrp, it won't show any progress for 2-10 minutes.
then it will show finished flashing
---------- Post added at 07:12 PM ---------- Previous post was at 07:07 PM ----------
I want to share my experience,
Latest TWRP 3.0.4.1 made all difficulty easy,
I was in oxyzen os 4.1.6.
then tried sideload, it fails,
then installed TWRp and flash 3.5.4 via TWRP, (have to flash data,system,cache,internal storage) before flashing,
then it just booted, no issue
Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help
any help guys,
skyh3ck said:
Hi Guys
My brothers lenovo K3note was runing RR rom and he did factory reset the phone, but now it only goes to TWRP and not booting into the OS
I tried to reinstall the RR rom, it installs normally but after reboot from TWRP, it goes back to TWRP instead of android Os.
What can i do now, please help
Click to expand...
Click to collapse
Hello mate
Don't worry.. Just wipe system, data and cache and re-install rr rom. The same thing happened to me when i did a factory reset on that ROM.
i did all, it shows as installing but after reboot goes back to TWRP recovery only
change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....
skyh3ck said:
i did all, it shows as installing but after reboot goes back to TWRP recovery only
Click to expand...
Click to collapse
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.
TheRootRiffs said:
I had the same problem a few days back. I tried everything but at the end, I had to flash the stock ROM using SP Flash Tool. After that, I was able to boot into Stock Android and rooted the phone again and installed the Custom Rom later.
Click to expand...
Click to collapse
And from where have you downloaded the stock ROM?
VinayakS said:
And from where have you downloaded the stock ROM?
Click to expand...
Click to collapse
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this
TheRootRiffs said:
youtube(dot)com/watch?v=TySRc_DkcFk&t=251s
Follow this
Click to expand...
Click to collapse
Thanks, I have already downloaded from some other URL.
@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007
Krzykor said:
@ skyh3ck and VinayakS
did it help?
My phone got a bootloop to twrp 3.0.2-7 after I wanted to restore to factory settings (from settings menu), I tried flashing 'new' RR-N-v5.8.5-20170926-aio_otfp-FINAL (during flashing I had 2 errors - logs available), tried to flash with some other roms, I tried to restore some old backups - same thing = bootloop to twrp.
I don't want to brick it like the guy from this thread https://forum.xda-developers.com/k3-note/help/help-unbricking-k3-note-k50a40-charging-t3699007
Click to expand...
Click to collapse
I did not had time to revert rooting and remove custom recovery, so can't say much at this moment.
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.
VinayakS said:
But your bootloop issue is most probably due to presence of TWRP, you need to completely remove root & TWRP, restore stock boot and recovery, then try.
Click to expand...
Click to collapse
Fortunately I've made it working again.
What I did, I flashed phone with SP FLash Tool 5.1628 and K50a40_S433_160909_ROW https://forum.xda-developers.com/k3-note/development/official-build-lenovo-k3-note-k50a40-6-t3370537. But it was not success at that time. Phone acted weirdly couldn't boot, only vibration after power on could be felt. So I tried to flash only the recovery Lenovo K3 Note Stock Recovery.img 10,2MB (also in the package but not default recovery image for S433) with the scatter map from S433 stockrom but SPFL said that it didn't end successfully, so I flashed only rocovery from stock rom S433 target_bin folder recovery.img 12800kB and then voila, it started to boot, there was a Lenovo logo, took some time to start but eventually phone is working.
Now I want to root it and / or flash correct version because my phone is actually k50-t5 not k50a40.
So thanks and good luck to those with similar problems after restoring factory settings on AIMROM.
same prob happend to me
first time encountering with TWRP loop.
downloading the stock rom
if there is any improvements will update
the solution for this(FIX)
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed
nidheeshv said:
all we need to do is reinstall a stock recovery and the again reinstall the TWRP
https://forum.xda-developers.com/k3-...-note-t3102997
follow this link..my phone just got fixed
Click to expand...
Click to collapse
That link is incorrect / not working.
updating
VinayakS said:
That link is incorrect / not working.
Click to expand...
Click to collapse
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
---------- Post added at 12:10 PM ---------- Previous post was at 12:05 PM ----------
nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727
nidheeshv said:
wait i will update the link now
---------- Post added at 12:05 PM ---------- Previous post was at 11:49 AM ----------
Before proceeding download a stock and TWRP recovery from the link below
https://drive.google.com/file/d/0B2I5z1mFfUpcTUtjWUtpUmFCRWM/view
this is the stock recovery,extract this recovery and paste the contents to a folder named STOCK
https://drive.google.com/file/d/0B2I5z1mFfUpcaE5sZTk3M2Vrc1E/view
this is the TWRP recovery,extract this recovery and paste the contents to a folder named TWRP
1.install adb and fastboot on ur laptop.(am using ububtu 16.04)
2.make the phone to go to TWRP
3.plug in the usb
4.open terminal and type adb devices
5.see if device is detected ,if detected do the following
go to the STOCK rfolder u created and open terminal there.and type the following
adb reboot bootloader
fastboot devices
fastboot flash recovery recovery.img
fastboot reboot
6.Now ur device will have stock recovery.
7.again repeat the above steps instead of STOCK use TWRP recovery.
8.your device will boot up with TWRP recovery build in
Click to expand...
Click to collapse
dont download the files from the below link ,its for a different device ,its just a reference i used
the reference is
http://https://forum.xda-developers.com/oneplus-5/how-to/guide-fix-twrp-recovery-script-loop-t3649727
sudip_55 said:
change ur twrp recovery, i mean update your twrp recovery and you will never face this problem....
Click to expand...
Click to collapse
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.
Salvadorfreeman said:
Exactly the same thing happened to me.
So I tried your idea and updated my TWRP, going from 2.8 to 3.1..1
But exactly the same thing happens - it still bootloops, but to the new TWRP.
I've tried flashing several different ROMs that all worked in the past. But no change.
Click to expand...
Click to collapse
do as what i have mentioned above,..and give update
It worked ! Thanks.
The reason I didn't try it straight away was all the comments about wrong links etc. And some of the links afterwards didn't work. So I was looking for a recovery.img file in other places.
I read your new message, so I used the first link in your post which gave me the recovery img. The TWRP link doesn't seem to work, but I already have an up to date TWRP on the phone.
Hello,
I attempted to root my Mi CC9 / 9 Lite and currently have a bootloop.
What I did:
-Flash TWRP from fastboot (success)
-Boot into TWRP (success)
-Wipe / Factory reset (success)
-Flashing Magisk v20 zip file (success)
-Then, reboot system sends me to TWRP again.
What I tried:
-The phone is not bricked. When I factory reset again from TWRP and boot to system, it boots up.
-Signing the boot image after flashing magisk using the zip file here (This did not work. Flashing the zip file returned a verification error)
Not quite sure how to root my phone at this point. Any help would be much appreciated. Thank you.
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
[email protected] said:
You need the Enable encryption zip...it will boot it up.. boot loop is cause from MIUI trying to encrypted and failing.
Flash the zip in this thread... go to the fstab zip that will help you
https://forum.xda-developers.com/mi-cc9/development/recovery-twrp-pyxis-unofficial-t3990493
Click to expand...
Click to collapse
Where do I find it?
dupreme said:
Where do I find it?
Click to expand...
Click to collapse
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
[email protected] said:
Direct link from OP.
https://www.mediafire.com/folder/zqk7a9qj5ltyd/Mi 9 Lite (pyxis)
Click to expand...
Click to collapse
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
dupreme said:
Thank you. I tried flashing the fstab zip after flashing magisk and it did not change the situation. Shall I first flash the auto-decrypt TWRP img and then try again?
Click to expand...
Click to collapse
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
[email protected] said:
What I do is this: I Boot in recovery and format data then I go to advance wipe and select data and then repair and select ext4 and swipe and then reboot recovery and flash the MIUI rom and then I reboot the recovery and mount system and vendor and flash the zip and then reboot and wait for it... you know it will boot up because after it boots up the bootanimation increases it's light before the actual booting in the system and the rest you can figure out... hope this helps you out.
Click to expand...
Click to collapse
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
dupreme said:
I'll try that. Thanks a lot. Do you use the auto-decrypt (the one you linked) TWRP in this, or just regular TWRP. I am using just the pyxis TWRP.
Click to expand...
Click to collapse
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
dupreme said:
Can anyone elaborate on what needs to be done? The previous responses did not explain how to ROOT the phone.
What I have just tried:
-flashed the TWRP img here
-did a wipe
-sent Magisk and the fstab zips to storage and flashed them (fstab first)
still gives bootloop to recovery. How to root this phone?
Thank you
Click to expand...
Click to collapse
Fstab zip is last because it's the encryption fix
[email protected] said:
After you unlock the bootloader I just put it in fastboot mode and fastboot boot "(whatever you have it called... I renamed it recovery) recovery.img and then press the volume up button and then I install the image through TWRP and reboot recovery and then follow the steps.
---------- Post added at 04:07 PM ---------- Previous post was at 04:06 PM ----------
I used the TWRP for the team win recovery project website.
---------- Post added at 04:25 PM ---------- Previous post was at 04:07 PM ----------
Fstab zip is last because it's the encryption fix
Click to expand...
Click to collapse
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
use twrp by brigudav. It has also s built-in Magisk installer.
JimmyBondi said:
use twrp by brigudav. It has also s built-in Magisk installer.
Click to expand...
Click to collapse
Can you share a link? I could not find an XDA thread. Thank you.
dupreme said:
I tried a combination of what you suggested and this guide and the phone booted up with root. However, opening the Magisk manager immediately says "your device needs additional setup" or something similar, and asks to flash a zip file. When I select flash, it says rebooting in 5 sec and stays in bootloop. Have you come across this?
Click to expand...
Click to collapse
TBH no because as Soon as I got TWRP I flash another rom Mi Globe rom to be exact and use the method I posted.