Database Develop

Android P Treble GSI

Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).

PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.

The Marionette said:
Which GSI booted on your SE?
Other Mi8 SE users reported that every GSI they flashes resulted in a bootloop.
Can you also mention the last MIUI version you had when you flashed a GSI?
As for P, you tried the semi-GSI, right?
Some people said that they had to fix things themselves for the image to boot but did you try flashing Magisk or setting Selinux to permissive? There should be a "permissiver" zip on the P gsi thread if I'm not mistaken.
dm-verity and selinux could cause a bootloop.
Click to expand...
Click to collapse
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.

PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Tell us how it works out [emoji846]
Skickat från min MI 8 via Tapatalk

PravAndroidGeek said:
Got my Mi8 SE running MIUI 9 Chinese.
Unlocked the bootloader and flashed the latest Xiaomi.EU MIUI 10 ROM as a base and then tried both: GSI for phh-Treble AOSP and Resurrection Remix phh-Treble. Both worked surprisingly well, the notch being detected was the main issue. I followed this guide on xda.
Yes it was the P semi-GSI that resulted in a bootloop. Might try the permissiver zip.
Click to expand...
Click to collapse
Been wanting to get the 8 se, but I've been waiting to hear if phh-treble and other GSIs work before buying. other than notch problems are there any other major issues? Once P is released and phh-treble is updated to android 9 the notch won't be a problem anymore due to AOSP notch support.

Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.

Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Can you point me to a guide to run Lineage os or RR on out SE?
I am familiar in flashing custom for many years but i am new to treble and just heard about it.

Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img

Ydraulikos said:
Unlock your bootloader, flash a TWRP and format your data partition. Then flash and try to boot the latest xiaomi.eu rom. If you succeed, format /data /system /cache and flash /system with an arm64 GSI for A only devices such as https://github.com/phhusson/treble_...d/lineage-v21/system-arm64-aonly-gapps-su.img
Click to expand...
Click to collapse
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions

marcel112 said:
ok, i am running xiaomi.eu rom so thats allready done.
The img i download is allready the lineage os, what i see
And is there a completely different forum/site where just. only trebel based custom roms are stored and discussed.
Is it gapps included, because normally it has to be flashed separtly.
Can you just format and go back to any miui rom, and when wanted to trebel based, just flash img file in /system again
Sorry for all the questions
Click to expand...
Click to collapse
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.

Ydraulikos said:
Gapps are included in the above link. You don't need to flash anything else. And yes you can always flash the stock rom. Just remember to erase /data when you change between MIUI & AOSP based ROMs.
Click to expand...
Click to collapse
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla

marcel112 said:
ok, so its like normal business.
Normally when i switch between custom i allways full wipe
/dalvik
/data
/cache
/system
As long as format data was once, i dont have problem..
Can you provide links for more like RR for SE?
I didnt knew there was development at all for SE on custom roms
EDIT: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
this one is for RR, and if i am correct you linked me to the first in the V5 section, so the xiaomi mi 8 se is a ARM64 A-only device?
But what is the difference between gapps and vanilla
Click to expand...
Click to collapse
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.

Ydraulikos said:
Running lineage GSI on SE too without issues (except some full screen apps which do not support notch). The minimum brightness is a bit high.
Click to expand...
Click to collapse
Does the system detect the notch on lineage?

Ydraulikos said:
Gapps include google services, vanilla does not.
Mi 8/SE are ARM64 A-only devices. You can try flashing any treble based rom with a high chance to operate normally. With a decent treble implementation, there is no need for custom rom development. The device specific blobs are moved to a separate partition and are provided by vendor.
Click to expand...
Click to collapse
i did full wipe,
after that i tried to install image, but as what do i need to flash this?
system image
boot
recovery
vendor image
firmware
persist
splash
logo
etc etc?
i choose system image, but after flash ( was quick ) i get no OS?
edit: so i can flash anyone off this page, as long as i use arm64 Aonly for my Mi 8 SE?
edit 2: got it..
install is real fast, and phone is very quick
after trying treble...
i tried to go back to miui backup..
It boots fine, but i cant get past pin code?
I know 100% its the right code, does it have to do with trying treble?

PravAndroidGeek said:
Has anybody tried the Android P DP4 GSI on the Xiaomi Mi 8/ Mi 8 SE?
Couldn't get the treble P GSI to boot on my Mi 8 SE but I managed to get the Oreo GSI running (doesn't have notch support though).
Click to expand...
Click to collapse
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.

jectsin said:
MI8 is also same.
P GSI (can't boot)
RR oreo rom (all working)
- last MIUI verion : XIAOMI.EU 8.7.19 version.
Click to expand...
Click to collapse
Everything works on RR? How is the camera?

_katho_ said:
Everything works on RR? How is the camera?
Click to expand...
Click to collapse
work. but bad quality

jectsin said:
work. but bad quality
Click to expand...
Click to collapse
yes and notch is not detected for me

marcel112 said:
yes and notch is not detected for me
Click to expand...
Click to collapse
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.

The Marionette said:
Notches are "expected" on AOSP only with P and newer Android versions.
It probably can be modded but since P is around the corner, it might not be worth it.
Click to expand...
Click to collapse
i know this is not miui forum, but i made twrp backup..
Why cant i unlock after restoring after flashing Treble based roms ?
I tried yesterday 3 trebles and full wiped, and restored nandroid of miui 10.
All looks good, but after boot up, i cant get past pincode( i know its right code 110% )

Magisk 17.1 & treble-roms ?

Hi
everything is almost in title : do latest magisk work with the treble custom roms for Santoni ?

Yes

Yeah bro. works fine and safetynet error is fixed now.

newbie_or_not_newbie said:
Hi
everything is almost in title : do latest magisk work with the treble custom roms for Santoni ?
Click to expand...
Click to collapse
Ya work treble android v8.1 and 9.0

Magisk 18.1 issue

Hi Guys,
I been using this device for more than 2 weeks. After i unlocked this, I attemted to intall twrp, xiaomi.eu rom and magisk. Twrp works but magisk 18.1 isnt. So i decided to look for fix on how to install magisk 18.1 over xiaomi.eu. Glad that I found in the xiami.eu thread similar case as mi mix3 and one kind person shared this magisk 18.1 link and able to test it. And it worked.
I also tested Magisk 18.2 by ianmacd which is currently installed in my rn7.
So to cut thing short. Below is the latest working magisk versions for our redmi note 7.
Magisk 18.1 (Moded)
https://www.mediafire.com/file/6maum4k7d3hjc0y/Magisk-v18.1_mix3%E4%B8%93%E7%89%88.zip/file
MIRROR:
https://drive.google.com/file/d/16XDKFiF0qXkQRTZ1A0AjvKAv8O53kQWd/view?usp=drivesdk
Magisk 18.2 by ianmacd (This is what I am using now)
https://github.com/ianmacd/MagiskBuilds/raw/master/Magisk-v18.1-2019020401-ianmacd.zip
Magisk 18.2 by topjohnwu
Magisk Manager 7 by topjohnwu
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Older Version:
Magisk 17.3 by topjohnwu
https://github.com/topjohnwu/Magisk/releases/download/v17.3/Magisk-v17.3.zip
Magisk Manager 16.1 by topjohnwu
https://github.com/topjohnwu/Magisk/releases/download/manager-v6.1.0/MagiskManager-v6.1.0.apk

ebautista said:
Hi Guys,
I been using this device for more than 2 weeks. After i unlocked this, I attemted to intall twrp, xiaomi.eu rom and magisk. Twrp works but magisk 18.1 isnt. So i decided to look for fix on how to install magisk 18.1 over xiaomi.eu. Glad that I found in the xiami.eu thread similar case as mi mix3 and one kind person shared this magisk 18.1 link and able to test it. And it worked.
So to cut thing short. Below is the working magisk 18.1 for our redmi note 7.
Click to expand...
Click to collapse
Thanks, it really works. :good:

ebautista said:
Hi Guys,
I been using this device for more than 2 weeks. After i unlocked this, I attemted to intall twrp, xiaomi.eu rom and magisk. Twrp works but magisk 18.1 isnt. So i decided to look for fix on how to install magisk 18.1 over xiaomi.eu. Glad that I found in the xiami.eu thread similar case as mi mix3 and one kind person shared this magisk 18.1 link and able to test it. And it worked.
So to cut thing short. Below is the working magisk 18.1 for our redmi note 7.
Click to expand...
Click to collapse
Thank you very much! It is working!

ebautista said:
Hi Guys,
I been using this device for more than 2 weeks. After i unlocked this, I attemted to intall twrp, xiaomi.eu rom and magisk. Twrp works but magisk 18.1 isnt. So i decided to look for fix on how to install magisk 18.1 over xiaomi.eu. Glad that I found in the xiami.eu thread similar case as mi mix3 and one kind person shared this magisk 18.1 link and able to test it. And it worked.
So to cut thing short. Below is the working magisk 18.1 for our redmi note 7.
https://www.mediafire.com/file/6maum4k7d3hjc0y/Magisk-v18.1_mix3%E4%B8%93%E7%89%88.zip/file
Click to expand...
Click to collapse
Do you have the thread that describes what the issue is? I would like to pass as much information along to the developer of Magisk as possible so they can fix it in their next update

Enddo said:
Do you have the thread that describes what the issue is? I would like to pass as much information along to the developer of Magisk as possible so they can fix it in their next update
Click to expand...
Click to collapse
I dont have like that mentioned exactly what happened. But i guess the developer can look at the flash zip file and compare against the official flash file.
But based on my reasearch, i dont know if this help, mi mix 3 and redmi note 7's system partition is at /system_root/system path.

thanks!!

upload with nice spam generator unreliable link no information on what or how a correction was made

great, it really works!

嗨，大家好，
我使用这个设备超过2周。在解锁了这个之后，我发现了twrp，xiaomi.eu rom和magisk。Twrp可以工作，但是磁盘18.1不是。所以我决定寻找如何在xiaomi.eu上安装magisk 18.1的修复程序。很高兴我在xiami.eu线程中找到了类似mi mix3的案例和一个人分享了这个magisk 18.1链接并且能够测试它。它奏效了。
所以要缩短东西。下面是我们的redmi note 7的工作磁盘18.1。

I saw it somewhere that the latest miui is just not compatible with the latest magisk, so I ended up using magisk 17.3, it has everything I need and I hardly noticed any difference

I have mix 3 n rn7, when I saw the issue with rn7, having similar architecture of memory...I flashed same modded magisk 18.1 for mix 3 n it worked with magisk manager 7 ofc

PeppeCNN said:
I have mix 3 n rn7, when I saw the issue with rn7, having similar architecture of memory...I flashed same modded magisk 18.1 for mix 3 n it worked with magisk manager 7 ofc
Click to expand...
Click to collapse
Or : use magisk v17 or magisk cannary build.

iofujsiow said:
I saw it somewhere that the latest miui is just not compatible with the latest magisk, so I ended up using magisk 17.3, it has everything I need and I hardly noticed any difference
Click to expand...
Click to collapse
But you may not be able to download and install some magisk module from the module manager.

ebautista said:
Or : use magisk v17 or magisk cannary build.
Click to expand...
Click to collapse
Cannary build can create problems of stuck in update rom
N 17 don't let work some modules

Not working for me on eu rom.. not sure why.. as it does on the beta builds??
Nothing for root has worked for me, v17 v17.3 this v1.81 SuperSU v2.82.. they all install fine but after boot nothing.. not app or root

tillaz said:
Not working for me on eu rom.. not sure why.. as it does on the beta builds??
Nothing for root has worked for me, v17 v17.3 this v1.81 SuperSU v2.82.. they all install fine but after boot nothing.. not app or root
Click to expand...
Click to collapse
Did u tried version I posted up?

PeppeCNN said:
Did u tried version I posted up?
Inviato dal mio MI PAD 4 utilizzando Tapatalk
Click to expand...
Click to collapse
Your link says 404 Not Found?
Edit: got it working just had to manually install apk i'm used to the zip adding it

tillaz said:
Your link says 404 Not Found?
Edit: got it working just had to manually install apk i'm used to the zip adding it
Click to expand...
Click to collapse
Works now?

PeppeCNN said:
Cannary build can create problems of stuck in update rom
N 17 don't let work some modules
Click to expand...
Click to collapse
Yeah that is why I shared it in the OP.

PeppeCNN said:
Works now?
Click to expand...
Click to collapse
Says 500 Internal Server Error now?

How to install resurrection remix gsi in moto g6

Hey guys. Any one help me here to properly install the gsi for moto g6. I don't want to mess it up.

androidtab2 said:
Hey guys. Any one help me here to properly install the gsi for moto g6. I don't want to mess it up.
Click to expand...
Click to collapse
https://www.xda-developers.com/flas...BRAB&usg=AOvVaw21lcTNgfGORpOgwJ8G7W6U&ampcf=1

HueyT said:
https://www.xda-developers.com/flas...BRAB&usg=AOvVaw21lcTNgfGORpOgwJ8G7W6U&ampcf=1
Click to expand...
Click to collapse
Thanks. will this cause any problems?

androidtab2 said:
Thanks. will this cause any problems?
Click to expand...
Click to collapse
99% function but 1% not. Stock is best but if you're bored, back up with TWRP and try GSI

descendant rom works great... No issues on my side... all the gestures that comes with the rom made me forget about Moto actions..not to long i Installed "Dolby" it made me forget about going back to stock... Battery wise is almost like stock, the first day flashing the rom was ok, after a week of using it's pretty good...

jglm4u said:
descendant rom works great... No issues on my side... all the gestures that comes with the rom made me forget about Moto actions..not to long i Installed "Dolby" it made me forget about going back to stock... Battery wise is almost like stock, the first day flashing the rom was ok, after a week of using it's pretty good...
Click to expand...
Click to collapse
Please tell me which image you have taken and which gapps you have installed, thanx

​
mcc2005 said:
Please tell me which image you have taken and which gapps you have installed, thanx
Click to expand...
Click to collapse
http://bit.ly/TwoDotZero_arm_aonly
Must be on Oreo base
Open gapps Pico
Magisk 18.1 for root

HueyT said:
​
http://bit.ly/TwoDotZero_arm_aonly
Must be on Oreo base
Open gapps Pico
Magisk 18.1 for root
Click to expand...
Click to collapse
Thank You, I will test it soon. Actually, I am on Stock PIE so I have to go Back to Oreo...
I have been tested, but I get an error while open gapps installed in twrp 'error 64:... (in red) so I am back on Stock... Thanks again.

mcc2005 said:
Thank You, I will test it soon. Actually, I am on Stock PIE so I have to go Back to Oreo...
I have been tested, but I get an error while open gapps installed in twrp 'error 64:... (in red) so I am back on Stock... Thanks again.
Click to expand...
Click to collapse
Unofficial TWRP works for Gapps. Official TWRP doesn't. It's been broken for 6 months

Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?

underwater69 said:
Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?
Click to expand...
Click to collapse
Most GSI requires Oreo base. Since u have PIE, you're limited to phh AOSP v108, Octopus latest, AEX official, Descendant 1.5 or 2.1 made by the Real John Galt avail. on Telegram for G6 (2.0 needs Oreo). VOLTE generally doesn't work on GSI--just 4G. If u need VOLTE, stay on stock Oreo or PIE. RR7 disallows SD card (int/ext) access but works on PIE base

HueyT said:
Most GSI requires Oreo base. Since u have PIE, you're limited to phh AOSP v108, Octopus latest, AEX official, Descendant 1.5 or 2.1 made by the Real John Galt avail. on Telegram for G6 (2.0 needs Oreo). VOLTE generally doesn't work on GSI--just 4G. If u need VOLTE, stay on stock Oreo or PIE. RR7 disallows SD card (int/ext) access but works on PIE base
Click to expand...
Click to collapse
HueyT. Have tried just about every possible way of installing RR on Moto G6. The last attempt was to completely wipe phone(format, and all directories deleted.). Flashed AOSP 9 PHH treble. It booted properly. Completed "basic setup" then after brought to home screen, powered down. Rebooted into FastBoot. Dirty flashed RR 9 from official download site, and it never passes boot screen. Have left the device for over 30 minutes. Any help would be appreciated!

PhoneSlayer said:
HueyT. Have tried just about every possible way of installing RR on Moto G6. The last attempt was to completely wipe phone(format, and all directories deleted.). Flashed AOSP 9 PHH treble. It booted properly. Completed "basic setup" then after brought to home screen, powered down. Rebooted into FastBoot. Dirty flashed RR 9 from official download site, and it never passes boot screen. Have left the device for over 30 minutes. Any help would be appreciated!
Click to expand...
Click to collapse
RR7 has broken SD card (int/ext) access so can't download anything or any apps or take any photos. Thus, get Oreo vendors and flash RR6.1 and be done with it

underwater69 said:
Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?
Click to expand...
Click to collapse
There are several GSI's flashable off of PIE vendors: pHH AOSP v111, Descendant AOSP v2.1 (John Galt has customized it to G6 on our Telegram group with Gapps built-in, but GSI vanilla version listed here will work also), AEX official 6.1, Octopus 11/18, PixelExperience 8/2018 version, LOS16, DotOS and Syberia by Nfound on Android File Host) are those that I can cofirm work on PIE vendors.
The other GSI's are best installed on top of stock Oreo vendors.
Most GSIs, VOLTE does NOT work (just 4G data) and PLAY Store is NOT certified (except John Galt's version as it's customized for our G6). Most Play Store needs Device ID apk to get GSF value to manually register your phone before Play store will work.

Question Is it possible to install ANX Camera in Redmi note 10 pro without root?

I am currently using Havoc OS 4.16 (non rooted) custom rom and the rom came with ANX Camera. It performs really amazing and i would like to install it in other roms. However when i searched around the internet on installation of the camera app some say it requires it needs root and magisk module while others say it doesn't need root and can be flashed from custom recovery without root. Can someone give a clear answer?
Device: Redmi Note 10 Pro
Code name: Sweet
Android Version: 11
Current rom: Havoc 4.16
Custom Recovery: Orange Fox
Encryption status: Yes
Anx version in Havoc: 204.StunningHeavenlyFugu

No. ANX is a magix module now. So magix is needed for ANX. All you can do is install a pre installed ANX rom like Project Elixir, pixelOS, etc.

There are some ROMs that have the MIUI camera preinstalled, like crDroid and PixelOS

andrewzodina said:
No. ANX is a magix module now. So magix is needed for ANX. All you can do is install a pre installed ANX rom like Project Elixir, pixelOS, etc.
Click to expand...
Click to collapse
Does project elixir have Anx camera?

any update to this thread?
im really appreciated

xdadice said:
any update to this thread?
im really appreciated
Click to expand...
Click to collapse
im sure exist apk version anx without magisk, but i don't remember where i founded.. groups telegram for sure...
i founded a recovery version named "Recovery-ANXCam-Installer.zip" too but not tested

aleMarvel said:
im sure exist apk version anx without magisk, but i don't remember where i founded.. groups telegram for sure...
i founded a recovery version named "Recovery-ANXCam-Installer.zip" too but not tested
Click to expand...
Click to collapse
can u give me the link or ill be searching but ty appreciated bro