Guys, I decided to install custom firmware, but I met a bunch of problems.
I chose this recovery https://4pda.ru/pages/go/?u=https:/...4690/fsdownload/krdcaHlb9/TWRP_A30&e=94266802 and installed it through One, the recovery is loading, everything is fine. Then I decided to install Lineage OS 17.1 (https://w3bsit3-dns.com.ru/forum/index.php?showtopic=948701&view=findpost&p=90491345), BUT after a successful installation of the image it loads me into recovery again, and in the reboot section it says "no os installed ". At the moment, I can’t install any os - he writes that it is successful but eventually reboots into recovery. I will be glad to any help or advice.
dude same here , i tried flashing arrowOS and pixel EXperience but no OS installed shown ..i think its because TWRP doesn't support on android 10 cause on TWRP you can't change the option "mount system as read". this one is the first problem and there are so many else...
i tried many options, flashing new TWRP as well but RIP.
Yeah, i found it out too. Ive flashed stock through odin and this works fine. Now will search for the right recovery. Maybe somebody leave link here
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
NegilisticBluesman said:
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
Click to expand...
Click to collapse
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
luke martinez said:
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
Click to expand...
Click to collapse
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
NegilisticBluesman said:
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
Click to expand...
Click to collapse
hey man, its again giving me download error :crying::crying:can you give me another download link to TWRP for Andriod 10?? Thanks
btw system partition type for GSi rom - A or A/B ??:fingers-crossed:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
NegilisticBluesman said:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
Click to expand...
Click to collapse
sorry i don't know russian..can you please upload that TWRP to google drive or any other site
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
luke martinez said:
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
Click to expand...
Click to collapse
if u still need here is completly working twrp for samsung a30: https://drive.google.com/file/d/1fnXYqD_lyogDbjx9MnJ51cM2PmMoImc4/view?usp=sharing:highfive:
Related
Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/
SToNeD said:
Just released.
http://xiaomi.eu/community/threads/5-6-11.27706/
Click to expand...
Click to collapse
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.
jazz452 said:
Well spotted you flashed it? If so via twrp with full wipe?
What about GAPPS is it 64bit version?
Are we downloading for LEO?
Jeez to many questions, just think someone might mess up.
I'll test and report back.
Click to expand...
Click to collapse
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.
Is there no improvements from 6.5.1.0 version?
Also how do I flash twrp on my phone? Do I need root?
Thanks
jazz452 said:
So I downloaded the EU rom, make sure you download for Leo, installed via TWRP with full wipe as per instructions. To be honest if your from uk no point its still english US not UK, For everyone else yea go for it no problems and Playstore included.
Click to expand...
Click to collapse
Can you tell me if German is included? Cant find it in the list on xiaomi.eu - now I'm a little bit unsure.
Can't see German even after installing.
Sent from my MI NOTE Pro using XDA Free mobile app
European Modem??
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??
langas said:
Hi,
Have you tried if also is changed the modem to accept the european 4G??. In Spain does not work the 4G....
Any tutorial or link how to flash TWRP??
Click to expand...
Click to collapse
Here you go bro :
http://en.miui.com/thread-118114-1-1.html
I just flashed this rom and i can confirm that it works well here in the uk on the ee 4g network no problems for me and very happy with this phone
Are there any instructions on how to install it?
I found TWRP, but need root to install it which i don't have.
Just boot to TWRP first via fasboot by using fastboot boot twrp.img command,
Then flash supersu,
After u got root access, install flashify and flash twrp
Is French included in this ROM? Probably not...
Will my apps be in French anyway or will it go like the UI?
Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!
gavjs said:
Hi - I tried installing the most recent stable version for the Note Pro (xiaomi.eu_multi_leo_V6.6.3.0.LXHCNCF_v6-5.0) and it was completely unusable. Lots of system processes failing etc. Has everyone else had this experience or am I doing something wrong? I installed initially through TWRP, then also tried through MiRecovery.
Just got the phone and really liking it, but very keen to get it working more like a UK phone! Great to see there's people working on this!!!
Click to expand...
Click to collapse
It works fine for me in UK, full wipe in TWRP? You said first with TWRP and then Mi, did you reflash original recovery. I always find that after flashing a new rom I have to reflash GAPPS or I get the problems you describe.
I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks
gavjs said:
I had been unsure if the 'Wipe All' would also scrub the ROM zip file, so did not do this first time.
This time I did wipe everything, which also resulted in the ROM zip file being deleted.
Managed to sideload it and everything is now working! Many thanks for the suggestion. And for future, should I be wiping everything, or is there a way to avoid the sideload?
Thanks
Click to expand...
Click to collapse
Like I said just reflash google apps no need for full wipe, use TWRP, keep a copy of GAPPS on your phone along with the rom so wiping won't be a problem should you need too.
I'm trying to flash Lineage OS to my mi5, I'm very new to this so I don't know exactly what i've done wrong. I get error 7 when i try to flash using twrp. Do I need to update anything?
obg_ said:
I'm trying to flash Lineage OS to my mi5, I'm very new to this so I don't know exactly what i've done wrong. I get error 7 when i try to flash using twrp. Do I need to update anything?
Click to expand...
Click to collapse
You need to flash a MIUI Nougat firmware before flashing Lineage OS. You'll find all the links in Lineage OS thread if you read the instructions carefully.
Wow, fast reply. A lot of guides seem not to mention this. I'll let you know if it works.
Thanks
EDIT: All worked. For anyone who needs help, these are the links i used:
NOTE I REPLACE THE ASTERICK WITH A PERIOD '.' I CANT POST FULL LINKS AS IM TOO NEW
xiaomiadvices*com/download-xiaomi-mi-5-nougat-update-miui-8-2-global-stable-rom/
(I installed through adb sideloading instead)
Downloaded the rom off this page:
xiaomiadvices*com/download-miui-82-global-stable-rom/
Then i installed lineage os like normal as a zip file
Massive Thanks once again!!
obg_ said:
Wow, fast reply. A lot of guides seem not to mention this. I'll let you know if it works.
Thanks
EDIT: All worked. For anyone who needs help, these are the links i used:
NOTE I REPLACE THE ASTERICK WITH A PERIOD '.' I CANT POST FULL LINKS AS IM TOO NEW
xiaomiadvices*com/download-xiaomi-mi-5-nougat-update-miui-8-2-global-stable-rom/
(I installed through adb sideloading instead)
Downloaded the rom off this page:
xiaomiadvices*com/download-miui-82-global-stable-rom/
Then i installed lineage os like normal as a zip file
Massive Thanks once again!!
Click to expand...
Click to collapse
You don't need to flash whole rom. Flashing the firmware it's enough. You can find TWRP flashable firmwares here: https://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898
obg_ said:
I'm trying to flash Lineage OS to my mi5, I'm very new to this so I don't know exactly what i've done wrong. I get error 7 when i try to flash using twrp. Do I need to update anything?
Click to expand...
Click to collapse
twrp gives error 7 when it is unable to write to the system partition.
check in recovery if you have mounted the system as read-only.
twrp-->mount-->check box at the bottom.
hi guys i have a friend who had tried to root the huawei p8 lite 2017 with this guide,https://newesc.com/root-al-huawei-p8-lite-2017/ , he have this version of the firmware pra-lx1c55b105 after the flash of this kernel for the root , the phone is gone to a bootloop so my friend it's entered to the recovery and than wiped all and the phone works again , the phone had the root but he have a lot of problem if i go to the developer mode and try to open it comes a blank page and than he retun to the setting the same thing appear when i try to open the setting to enable the unkown source for the app, and the last problem is who he can't uninstall the app after installed , the only way to unistall is with titanium backup but the phone force reboot when it uninstall it .... so anyone had this problem? how i need to solve ? i really need a help for him , sorry for my bad english but i'm italian
halfboss said:
hi guys i have a friend who had tried to root the huawei p8 lite 2017 with this guide,https://newesc.com/root-al-huawei-p8-lite-2017/ , he have this version of the firmware pra-lx1c55b105 after the flash of this kernel for the root , the phone is gone to a bootloop so my friend it's entered to the recovery and than wiped all and the phone works again , the phone had the root but he have a lot of problem if i go to the developer mode and try to open it comes a blank page and than he retun to the setting the same thing appear when i try to open the setting to enable the unkown source for the app, and the last problem is who he can't uninstall the app after installed , the only way to unistall is with titanium backup but the phone force reboot when it uninstall it .... so anyone had this problem? how i need to solve ? i really need a help for him , sorry for my bad english but i'm italian
Click to expand...
Click to collapse
IDEM!! COMPLETELY IDEM! I had the pra-lx1c55b105 too, and, after root, I have your same problems too! Please, someone help us!!!
nobody read the multiple thread about this problem ?
Sorry but it's really annoying. (it's not about you, nothing personnal
Your problem is related to a different version between the boot_root image and, the system partition...
You could try to update your phone to the latest firmware (so you have to configure the wifi and then check in the "about" page for an update)
If an update if available, then I think this will solve your problem.
And be very carefull, never install (apk or worse, flash a partition ) something if no version is specified
My friend had maked the update over Wi-Fi but after the download the flash in the recovery fails, why ? @ripp2003 can you link me where la located this theard ? Thanks a lot
halfboss said:
My friend had maked the update over Wi-Fi but after the download the flash in the recovery fails, why ? @ripp2003 can you link me where la located this theard ? Thanks a lot
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/how-to-root-huawei-p8-lite-2017-android-t3582179
But this topic is related to PR1-LX1C432B110 and this is the source of newesc.... (this topic got a lot of informations on how to find your firmware)
So right now, you need the exact version of the firmware : I think it's pra-lx1c55b105
-> Find it and download it with Huawei Firmware Finder
-> Extract the boot.img from the firmware with Huawei Firmware Extractor (or maybe you've done a copy before flash the boot_root.img ?)
-> fastboot flash boot boot.img
You 'll lost root but this way, I think you can recover your phone
If this doesnt work, I'm really sorry but, you have to wait for some developpers to make Rom....or, some special things for recover an official firmware.
I'm sorry, this situation is a bullsh**
Really Good luck
@ripp2003 thanks a lot, i had tell this to my friend and Now He try
@ripp2003 bad news after the flash of the kernel rom the Phone is soft bricked , it appears the tim logo than reboot in recovery , He has tried to flash the full rom from the recovery but only install failed
halfboss said:
@ripp2003 bad news after the flash of the kernel rom the Phone is soft bricked , it appears the tim logo than reboot in recovery , He has tried to flash the full rom from the recovery but only install failed
Click to expand...
Click to collapse
Even after doing a full wipe whith manual calling recovery ?
ripp2003 said:
nobody read the multiple thread about this problem ?
Sorry but it's really annoying. (it's not about you, nothing personnal
Your problem is related to a different version between the boot_root image and, the system partition...
You could try to update your phone to the latest firmware (so you have to configure the wifi and then check in the "about" page for an update)
If an update if available, then I think this will solve your problem.
And be very carefull, never install (apk or worse, flash a partition ) something if no version is specified
Click to expand...
Click to collapse
ripp2003 said:
Even after doing a full wipe whith manual calling recovery ?
Click to expand...
Click to collapse
Manual calling recovery?
Recovery: Vol. + and power without PC connection
Then you can make a full wipe, try this
ripp2003 said:
https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/how-to-root-huawei-p8-lite-2017-android-t3582179
But this topic is related to PR1-LX1C432B110 and this is the source of newesc.... (this topic got a lot of informations on how to find your firmware)
So right now, you need the exact version of the firmware : I think it's pra-lx1c55b105
-> Find it and download it with Huawei Firmware Finder
-> Extract the boot.img from the firmware with Huawei Firmware Extractor (or maybe you've done a copy before flash the boot_root.img ?)
-> fastboot flash boot boot.img
You 'll lost root but this way, I think you can recover your phone
If this doesnt work, I'm really sorry but, you have to wait for some developpers to make Rom....or, some special things for recover an official firmware.
I'm sorry, this situation is a bullsh**
Really Good luck
Click to expand...
Click to collapse
The problem is to find it... On the internet I can't find anything, and on firmware finder too. I need the stock PRA-LX1C55B105 firmware (especially the boot.img) but the problem is to find it. I can't find it anywhere!!!
Please help
I Think what firmware finder isn't really good, someone know another method to download firmware or part of firmware like the boot.img?
halfboss said:
I Think what firmware finder isn't really good, someone know another method to download firmware or part of firmware like the boot.img?
Click to expand...
Click to collapse
I think it's this one, the Prague-L11C55B105
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v75035/f1/full/update.zip
ripp2003 said:
I think it's this one, the Prague-L11C55B105
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v75035/f1/full/update.zip
Click to expand...
Click to collapse
I'm not enough brave to risk the death of my device... Are you sure this is good for my device?
Manuele1000 said:
I'm not enough brave to risk the death of my device... Are you sure this is good for my device?
Click to expand...
Click to collapse
If your phone is softbrick, you could try but, I can't tell you this will work at 100%
With this new phone, we actually try a lot of things to see what happened and..... we are now all beta testers lol
I'm sorry but I can't promise you anything : this si what I've found with Huawei firmare finder so source is OK but like I sait : the version is Prague-L11C55B105 and the firmware is full OTA
My is pra-lx1c55b105
I have the same problem as Napoli.
I will try the Prague-L11C55B105 and I will let you know what hapend...
krousnik said:
My is pra-lx1c55b105
I have the same problem as Napoli.
I will try the Prague-L11C55B105 and I will let you know what hapend...
Click to expand...
Click to collapse
Yeah, thank you!! Let me know if you can boot the phone with that stock kernel, and if security and developper options works. Try the Webcam and the music player too, thank you!
Manuele1000 said:
Yeah, thank you!! Let me know if you can boot the phone with that stock kernel, and if security and developper options works. Try the Webcam and the music player too, thank you!
Click to expand...
Click to collapse
OMG!!! It worked! The phone booted with the stock kernel.
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Music player is working, camera also working... its back on pra-lx1c55b105.
krousnik said:
OMG!!! It worked! The phone booted with the stock kernel.
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Music player is working, camera also working... its back on pra-lx1c55b105.
Click to expand...
Click to collapse
Oh my God yeah!! Today afternoon I will try it! So, works everything? Security and developper options too? Yeah bro, very thank you!!
-------------------------------------
Can you tell me what you did? You flashed the entire zip, or only the boot.img? And how? With twrp right?
Yes everything works. I did factory reset and the phone is back to default.
I extracted BOOT image and RECOVERY image with HuaweiUpdateExtractor.
After that with I copied both BOOT and RECOVERY image in Minimal ADB and Fastboot folder.
At last I've connected the phone to PC and flashed BOOT and RECOVERY image.
I've disconnected the phone booted in recovery did factory reset and after that phone booted normally.
Most custom ROMs for the OnePlus 5 are now supporting encrypted devices only. However, some users choose to keep their device in a decrypted state for MultiROM support and for other reasons. If you follow the steps below, you can flash any encrypted ROM on your decrypted device (without losing data) and your device will remain decrypted! I found this information in one of the many threads I've read (I don't remember which one) and thought I'd post it here to help others and for easy reference. Enjoy!
Follow These Steps:
1. Boot into TWRP
2. Wipe caches, data, and system partitions
3. Flash encrypted ROM
4. Flash GApps
5. Flash Magisk
6. Flash no-verity-op5.zip (not created by me)
7. Reboot
8. Enjoy!
If you closely follow the instructions above, you can enjoy any ROM on your decrypted OnePlus 5 and have the best of both worlds! :highfive:
Note 1: If device gets stuck at OnePlus boot animation after following all of the steps above, hold the power button for 10 seconds to turn off device. Power the device back on and it will boot successfully into the ROM.
Note 2: Some ROMs are not compatible with MultiROM without the inclusion of additional commits by ROM developer.
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Tested it yesterday with aosip and all data are on internal storage. Flashed validus today without no-verity-op5.zip and it worked too. Didn't lose data on internal storage...
Gesendet von meinem ONEPLUS A5000 mit Tapatalk
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Yes, I have followed these steps to flash MANY encrypted ROMs on my decrypted device.
Confirmed to work successfully! :good:
Creeper36 said:
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Click to expand...
Click to collapse
I've found that flashing SuperSU (instead of Magisk) on encrypted ROMs often ends in a bootloop on my decrypted device. Flashing Magisk seems to be a requirement.
Not working for me. Tried with AICP release from 9/11. Wiped caches, system, data. Flashed rom. flashed gapps (tried stock/full/micro). Flashed magisk (also tried without). -> Bootloop
//edit
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
nico2195x said:
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
Click to expand...
Click to collapse
No, I believe your device must be decrypted to flash decrypted ROMs.
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
sjamie said:
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
Click to expand...
Click to collapse
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Sent from my Nexus 6 using XDA Premium HD app
shadowstep said:
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
Click to expand...
Click to collapse
And there's a thread I started for using FDE.
It works with most ROMs...
https://forum.xda-developers.com/oneplus-5/development/op5-disk-encryption-enabler-op5-t3672477
glockman4519 said:
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Click to expand...
Click to collapse
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
arjunarora said:
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
Click to expand...
Click to collapse
In addition to what is stated here, if you flash Magisk immediately after flashing the full firmware zip (no rebooting between steps), TWRP won't get replaced with the stock recovery. This is a great time saver!
Any method to get oxygen os as a secondary ROM with multirom?
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
sjamie said:
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
Click to expand...
Click to collapse
Darn, well thanks for the reply
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Have you tried flashing OxygenOS, the no-verity zip and Magisk?
glockman4519 said:
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the feedback and I'm glad this thread could provide you the guidance you needed.
Hello,
I need advice, please. MOTO G2 (2014) XT1068
XT1068 unlocked>TWRP installed>TWRP Fix permissions clicked>now boot animation and goes into black screen (with backlight).
More detailed:
Last night I have unlocked my XT1068 and installed TWRP, no problem.
(following this https://www.youtube.com/watch?v=BLSTDsFG1xw, citing https://forum.xda-developers.com/moto-g-2014/development/recovery-twrp-2-8-0-1-moto-g-2014-t2896165).
First deviation was I got TWRP from http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img as I ran into an unavoidable sign-up trap following the cited url).
Second deviation was I chose to install SU offered by the TWRP app via Gplay, which was unsuccessful.
So I decided to go back and follow the instruction, using the provided "Update SU" file but found my Windows Explorer but it didn't give me access to internal memory or SD card. After short research, I found that XT1068 "developer options>USB configuration" toggling MTP to Charging only and back MTP helped https://www.reddit.com/r/Android/comments/3nnkaa/cant_access_android_device_internal_storage_from/ as the Windows Explorer was able to access the XT1068 memory. (SD card was setup as internal memory).
I copied the file over, rebooted into TWRP but couldn't see the file. I remember having seen something like "unable to mount or access memory" in TWRP and remembered from XDA thread that permissions might be messed up. It was late, I jumped to a conclusion when I found the TWRP option "Fix permissions". I clicked it and have since the issue.
I can get into the menu which offers "recovery" and also get into TWRP
I have tried "Factory reset" but I am not sure what happens there, Motorola boot animation comes and then the black screen again (with backlight)
I think I have options but feel like in a minefield and better ask for what to do next.
Thank you
can you tell me you're bootloader version and on what android version you were when you messed up things? If your phone boots up to the bootloader i.e. the menu which allows you to enter recovery then you're having more than one options to fix this problem. But be careful this time. as this may brick your phone and it will be gone for good..
Read this XDA thread and do the steps carefully. This may restore your phone
https://forum.xda-developers.com/moto-g-2014/general/official-stock-firmware-t3018682
Hi, I had the stock Marshmallow and bootloader is showing 48.86 (if that is actually the number). I was aiming to do a titanium backup and then probably try a custom ROM.
I will follow the steps in the link provided to get back to a known working state before trying a custom ROM but I really like to understand what went wrong and in what state the phone now is. I don't think my deviations where a bad choice but clicking "Fix permissions" obviously was. I like to learn from mistakes.
Thanks for helping me out.
Ok, read the guide and am uncertain which firmware is the correct one for New Zealand (the thread is full of confusion about the versions). I am waiting for a reply there and asking here if I could from this point also try to flash a custom rom via TWRP? Or better back to a working condition before doing this? Thanks.
karteileiche said:
Ok, read the guide and am uncertain which firmware is the correct one for New Zealand (the thread is full of confusion about the versions). I am waiting for a reply there and asking here if I could from this point also try to flash a custom rom via TWRP? Or better back to a working condition before doing this? Thanks.
Click to expand...
Click to collapse
Umm.. About the firmware version of the stock ROM, you can search google for it. And as far as your question about trying a custom ROM, you can try whichever ROM you want (except Ubuntu Touch, it's installation methods are too confusing). Just download the ROM in .zip file and download "Google Apps (GApps)", I prefer open gapps and install the rom via TWRP.
Wipe out these paritions in TWRP > Wipe > Advanced Wipe:
Dalvik/ART cache
Cache
Data
System
Also before installing any custom ROM read the steps plus read user comments before flashing anything
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
pkdon123 said:
Umm.. About the firmware version of the stock ROM, you can search google for it. And as far as your question about trying a custom ROM, you can try whichever ROM you want (except Ubuntu Touch, it's installation methods are too confusing). Just download the ROM in .zip file and download "Google Apps (GApps)", I prefer open gapps and install the rom via TWRP.
Wipe out these paritions in TWRP > Wipe > Advanced Wipe:
Dalvik/ART cache
Cache
Data
System
Also before installing any custom ROM read the steps plus read user comments before flashing anything
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
Click to expand...
Click to collapse
Yes, thanks.
I have flashed ROM's successfully before on Galaxy S3 and Tab 2 and used gapps via TWRP.
I have tried Google for the correct version but find myself turning in circles, most-likely my limited search term knowledge.
https://www.reddit.com/r/MotoG/comments/4bgg02/info_all_moto_g_codenames_models_variants/ shows "XT1068 : Latin America/EU/UK/Asia/Australia/Germany/Brazil/India, Dual SIM" and the listed ROMs named XT1068_TITAN_RET ...(BR for Brazil?) (LA for Latin America?) (DSDS for India?) (GB for UK?) (DE for Germany?) then what? Some are obvious others are what I have read through various comments, DSDS may even be for (EU/INDIAN/GLOBAL), I have not been able to find a really good page explaining this.
You did not answer my last question directly but given that you stated how to flash a ROM and what to wipe, I assume you mean that I could alternatively install a custom ROM at this stage. (Which is what I had planned originally).
Still, would be nice to know the correct firmware version and also why clicking "Fix permission" turned things into custard.
Thanks.
pkdon123 said:
.........
P.S. make sure your TWRP is latest. For TITAN it is TWRP-3.2.0-0
Click to expand...
Click to collapse
Yeah, I´ve seen in the post of @karteileiche that link: http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img. That recovery is outdated and not from the original source. Maybe that´s the reason why things get messed up.
Downlad latest TWRP always from this site if you don´t need something unoffical for your device: https://dl.twrp.me/
For titan this would be: https://twrp.me/motorola/motorolamotog2014.html
About installation of custom roms: When you check any thread of custom roms you´ll find in the OP what to wipe and what to use.
And imho it would be better to first flash the actual recovery before flashing any custom rom.
Valid point, thanks for reminding me and providing the link.
karteileiche said:
Valid point, thanks for reminding me and providing the link.
Click to expand...
Click to collapse
You're welcome. Just send me a PM if you need further help or instructions.
Sent from my Moto G 2014 using XDA Labs
Wolfcity said:
Yeah, I´ve seen in the post of @karteileiche that link: http://www.devfiles.co/download/4lhHC4Uv/TWRP_2.8.0.1_Titan_v2.img. That recovery is outdated and not from the original source. Maybe that´s the reason why things get messed up.
Downlad latest TWRP always from this site if you don´t need something unoffical for your device: https://dl.twrp.me/
For titan this would be: https://twrp.me/motorola/motorolamotog2014.html
About installation of custom roms: When you check any thread of custom roms you´ll find in the OP what to wipe and what to use.
And imho it would be better to first flash the actual recovery before flashing any custom rom.
Click to expand...
Click to collapse
Yeah.. I Agree with your point?
---------- Post added at 03:34 AM ---------- Previous post was at 02:45 AM ----------
karteileiche said:
Yes, thanks.
I have flashed ROM's successfully before on Galaxy S3 and Tab 2 and used gapps via TWRP.
I have tried Google for the correct version but find myself turning in circles, most-likely my limited search term knowledge.
https://www.reddit.com/r/MotoG/comments/4bgg02/info_all_moto_g_codenames_models_variants/ shows "XT1068 : Latin America/EU/UK/Asia/Australia/Germany/Brazil/India, Dual SIM" and the listed ROMs named XT1068_TITAN_RET ...(BR for Brazil?) (LA for Latin America?) (DSDS for India?) (GB for UK?) (DE for Germany?) then what? Some are obvious others are what I have read through various comments, DSDS may even be for (EU/INDIAN/GLOBAL), I have not been able to find a really good page explaining this.
You did not answer my last question directly but given that you stated how to flash a ROM and what to wipe, I assume you mean that I could alternatively install a custom ROM at this stage. (Which is what I had planned originally).
Still, would be nice to know the correct firmware version and also why clicking "Fix permission" turned things into custard.
Thanks.
Click to expand...
Click to collapse
Yess, you can try installing custom rom and see if that works.. otherwise flashing stock rom will also be an option for you.
Fixed
Resolved by using the latest TWRP version and a clean flash of a custom ROM.
Thank you Wolfcity :good:
Fixed
Resolved by installing the latest TWRP version and a clean fash of a custom ROM.
Thank you Wolfcity :good:
karteileiche said:
Resolved by installing the latest TWRP version and a clean fash of a custom ROM.
Thank you Wolfcity :good:
Click to expand...
Click to collapse
You're welcome. Nice to hear it's working.
Sent from my Moto G 2014 using XDA Labs