Database Develop

[Q] Partition Problem

While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.

First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.

cfw950116 said:
While I flashed 1.2GB.zip to expand my partition size, I got some issue to reset my phone. now, my recovery is xiaomi stock recovery and when i go into fastboot mode, my pc can't detect my phone by adb function. I test variety of version and pc, still not work. Can someone help me to write a stock partition that can fastboot with MITool? Many thanks, my phone only can detect with MiTool in this moment. Sorry for interruption.
Click to expand...
Click to collapse
I was in the same situation. Mi recovery without adb and
and fastboot only. I'm on the phone and can't post links but if you go to the repartitioning thread and find my posts(there are not many)read it through and you will find a link to "how to fastboot" thread. If your computer recognizes your phone in fastboot mode than you'll be fine. Download from the same thread repartitioning to stock from the HTC mania guy if you want to flash miui with miflash. Otherwise it won't work. Good luck.

ashish289 said:
First flash cwm or twrp recovery with fastboot .flash stok repartition zip in cwm then flash with miflash.
Sometimes adb not work due to bad driver reinstall drivers for adb.
Click to expand...
Click to collapse
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.

gauravsaini964 said:
If you can flash CWM ,then you are good to go.My phone is not detected via adb devices command but I dont know how fastboot commands work all the time.
Click to expand...
Click to collapse
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.

ashish289 said:
i think adb will not work in this case because mi recovery dont support adb so boot into fastboot mode by pressing volume down + power key there will be mi bunny and fastboot mode .
u will need recovery in img format so extract recovery.img file from cwm r11 zip file and put it in adb or fastboot folder . then
open command prompt in adb folder and type.
fastboot devices
if it show device id then type
fastboot flash recovery recovery.img
fastboot reboot
try to boot it into recovery mode by using key combination ( vol up+ power buttuon) and it should boot in clockwork mode recovery.
and flash reparition zip to return to stok partition
repartition stok zip by eaxir http://forum.xda-developers.com/xia...ize-extend-partition-capacity-t3011918/page17
if u dont have repartition zip then use adb side load method to send file to device and flash it or ask me again.
now you can use miflash.
Click to expand...
Click to collapse
can i flash repartition stock zip by eaxir via twrp ? please answer

Stuck in ERROR MODE

hello guys pretty new to the flashing scene and ive made a mistake. ive tried flashing different twrp.img files and nothing and i mean nothing will make the recovery work, dont have access to the standard recovery either. my model is VTR-L09C440 unlocked bootloader. ive tried every possible solution that i can find and nothing works. Please help thanks
edit
i can flash kernals and recovery imgs via fastboot but still wont load up
apparently my system is 8.0.0.046(0BZC
any help? been here for like 10 hours trying to fix this!

no help i see......

How did you flash twrp ?
fastboot flash recovery_ramdisk yourtwrp.img

Blackball said:
How did you flash twrp ?
fastboot flash recovery_ramdisk yourtwrp.img
Click to expand...
Click to collapse
yeah i think i did it like that but it won't allow me to go in twrp itself by doing the commands volume up. keeps showing
ERROR MODE
ATTENTION!
PLEASE UPDATE SYSTEM AGAIN
ERROR!
FUNC NO:11 {RECOVERY IMAGE}
ERROR NO:2 {LOAD FAILED}

absynteZero said:
Hello Cloud,
arff fianl fantasy 7....arff arfffff so many hours without sleepin...sin is defeated!
it seems you don't flash well the TWRP.
frist you need the good,
https://forum.xda-developers.com/p10/development/recovery-twrp-3-2-1-0-emui-8-0-4-04-2018-t3773449
verify drivers.
verify that files you want to flash are in the fastboot.exe computer folder (the better is system root c
Go to fastboot mode
try
fastboot erase recovery_ramdisk
flash as
fastboot flash recovery_ramdisk nameofTWRPfile.img
and try again.
if you're really bricked, try as
fastboot flash recovery nameofTWRPfile.img
?
after this, if issue persist, maybe try to extract ramdisk.img from official update from Firmware finder with YOUR soft version.
and flash it before flash TWRP as
fastboot erase ramdisk
and
fastboot flash ramdisk RAMDISK.img
take the manufacturers cables not noname , and try to change usb
Click to expand...
Click to collapse
ive had no luck trying that. will give the huawei Multi tool a shot see if that can fix my problem

Solved Successfully flashed the update.app files with dc phoenix app. but it still says im on fromfuture which i dont understsnd considering i flashed a clean

Troubles reinstalling TWRP [Failed to load/authenticate boot image: Load Error]

I dirty flashed a new version of xiaomi.eu stable build, and it caused TWRP to uninstall itself.
Whenever I hold power on and volume up it just goes to fastboot.
Now I tried reinstalling TWRP like I've done many times before, but it keeps throwing an error. The error I get is when trying to boot without flashing the img. When I do this, I get the error:
Code:
fastboot boot TWRP.img"
downloading 'boot.img'...
OKAY [ 1.609s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 1.675s
Anyone gotten any ideas on what could be going on here? I'm scared to try anything as my phone currently works, but I need TWRP back to update my phone to a different versions and to install the clock mod again.
Thanks!

Got it to load once, but now back to square one. Throwing same error.

Now when running the command fastboot reboot recovery it's saying
Code:
fastboot: usage: unknown reboot target recovery
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.

Try on a computer with a USB 2.0 port, or a different usb cable, had the same issue once

Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.

I have the same error. How can I fix this pls?

MrkoZino said:
I have the same error. How can I fix this pls?
Click to expand...
Click to collapse
Flash the latest official rom then start all over again. Follow the post above you about miflash.

Hello, I've had the same problem, then flashed latest dev rom via MiFlash and it booted, but now after I flash any custom ROM in TWRP i have this issue again and need to reflash chinese ROM. How can I flash any custom rom?

i'm stuck in the same issue. stuck in fastboot and it would not load recovery. any fix?

Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
greendra8 said:
And writing 'fastboot boot twrp.img' turns the phone off / makes the screen go black. Fully bricked now as the OS wont load either.
Click to expand...
Click to collapse
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?

DJPlaya said:
Hi, i fixed the "Failed to load/authenticate boot image: Load Error" by simply restarting the Device.
It seems to appear randomly when flashing partitions and then block all further Transfers.
If the Device loops in Fastboot, the only Solution to me was re flashing the Stock Firmware.
I have the same Issue, but reflashing Stock Firmware or making OTA Updates dident helped for me. Ive already tried TWRP and OrangeFox without success. The Screen always turns black and Fastboot stays active in an limited Mode, any Ideas? My host Computer only has 3.0+ Ports only, but ive used an 2.0 Extender so it should be fine?
Click to expand...
Click to collapse
long time ago now. but i remember at one point having to flash the stock firmware using the mi unlock tool. i also remember trying every single version of twrp and rom until one finally worked. sorry i can't help much but i believe that's how i eventually fixed it.

hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp

Marihot said:
hi, I've experienced with the same thing.
this methode help me out from it.
try to reflashing some file image from the rom where youre want to install in hh with adb.
copy this files below from rom image to adb folder
1. system.img (command in adb >> fastboot flash system system.img)
2. boot.img (command in adb like #1, change the name of img file) do till #6
3. vendor.img
4. dtbo.img
5. cust.img
6. misc.img
7. now flashing twrp/recovery.img (choose twrp compatible with rom you want to install) with adb
8. the "fastboot boot recovery.img" with adb
9. flashing the rom by twrp
Click to expand...
Click to collapse
Where do you get these .img files?

iconoclasthero said:
Where do you get these .img files?
Click to expand...
Click to collapse
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder

Marihot said:
all img files come from the official rom china stable V12.0.2.0.QEBCNXM (.tgz), download and extract the tgz file then find img files from images folder
Click to expand...
Click to collapse
Please tell the details for this method

greendra8 said:
Ended up having to reinstall dev rom. Device relocked, so have to wait 15 days again. @BusterBg_18 Thanks, will do when I unlock the device
EDIT: When using Mi Flash tool, make sure to check 'clean all' and not 'clean all and lock' in the bottom right. That's what set me back 2 weeks.
Click to expand...
Click to collapse
BROOOOOOOOOO HAHAHAHAHAHA I LITERALLY JUST READ YOUR COMMENT AND 10 SECONDS LATER I FLASH THE ROM WITH "CLEAN ALL AND LOCK" Im a f-king dumb bro

Marihot said:
你好，我也经历过同样的事情。
这个方法帮助我摆脱它。
尝试使用 adb 从要在 hh 中安装的 rom 中重新刷新一些文件映像。
将下面的文件从 rom 映像复制到 adb 文件夹
1.system.img（adb >> fastboot flash system system.img中的命令）
2. boot.img（adb 中的命令，如#1，更改 img 文件的名称）直到 #6
3. 供应商.img
4.dtbo.img
5. 自定义.img
6. 杂项.img
7. 现在用adb刷twrp/recovery.img（选择twrp与你要安装的rom兼容）
8. adb 的“fastboot boot recovery.img”
9. twrp刷入rom
Click to expand...
Click to collapse
Thank you, brother

try fastboot set_active a
or fastboot set_active b

Can't Access Recovery or Device, only Fastboot

Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?

same problem here... were you able to fix it?

You might have to use the QFIL method to get your phone going again. Remember you MUST backup the EFS partition and anything associated with your phones imei and SN

Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
flash the boot partition then flash stock recovery then try to flash twrp then try to flash a custom or stock rom what you want.

Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
Anyone solve this problem?

Juninalilla said:
有人解决这个问题吗？
Click to expand...
Click to collapse
这两个可怕的重锁码吓了我一跳，以为手机没电了。幸运的是，我找到了解决方案。你可能需要找个老股rec，跟着视频操作，不用拆机，重点解压。进入adb文件夹，生效

Lirimaer said:
Hello,
I deciden to install Android 10 Beta 3 then install a custom rom. I succesfully installed Android 10 Beta 3, and tried to install Magisk as told in here. After the patched boot.img step, my device stopped booting.
When I press Power+Volume Up or Down, it always goes to fastboot mode. I can't boot into recovery from fastboot, I can't boot TWRP from fastboot. I tried:
fastboot oem reboot-recovery
fastboot boot twrp.img
fastboot flash recovery twrp.img
As shown in the image rebooting into recovery always failing. What can I do?
Click to expand...
Click to collapse
Hey guy,
My phone was running the rom "UL-ASUS_X00QD-ASUS-AOSP-17.0615.2005.25-1.1.1-user.zip" (downloaded from Asus Web). I tried to install the TWRP ver 3.3.1 unofficial and my phone was stuck on the fastboot mode only.
After a lot of searching on how to fix the issue, I didn't change anything and almost gave up, until I've read this thread.
My Asus Zenfone 8 flip is STUCK in CSC FASTBOOT MODE PLZ HELP!, RAW FIRMWARE ANYONE???
These are what I did to get the phone into the recovery mode:
1. Extract the rom zip file that my phone was running on.
2. Copy the file boot.img to adb folder.
3. On PC, at adb folder enter CMD, connect the phone then type
fastboot -w
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot recovery
4. After that, my phone can be booted into the recovery mode.
Hope you can solve the same problem as me.
Bye bye ...

Help| Can't boot

Hi,
I have Carbon ROM with Android 10,
I wanted to flash Bliss ROM, and it says that I need a rooted device,
So I've downloaded Magisk and follow the instruction, created a boot.img and flashed it in fastboot, then I did the same only with twrp recovery & Magisk, flashed it and now it is wiered and I'm not sure what is the problem,
I have fastboot BUT when I try to perform any command, it shutsdown and preety useless, I've tried from PC, if I try from MAC, I can boot into twrp but every operation is causing the tablet to reboot.. So I can't even flash a stock ROM,
In PC, the recognized Android device (When in fastboot mode) I update it's driver to Android bootloader device
Now, fastboot says: "fastboot: error: cannot get boot partition size"
tried:
fastboot flash:raw boot boot.img
fastboot flash:raw recovery twrp.img
How can I solve it?
Thanks !!!

Did you also try
Code:
fastboot flash boot boot.img
?
I can boot into twrp but every operation is causing the tablet to reboot
Click to expand...
Click to collapse
I didn't understand the problem, I think.
You flashed a patched boot.img and your twrp recovery isn't working? Like if you press a button, it just reboots?
I have fastboot BUT when I try to perform any command, it shutsdown and preety useless
Click to expand...
Click to collapse
If you do
Code:
fastboot devices
it also doesn't work?
Or only if you flash a img?