My S10 just won't update.. - Samsung Galaxy S10 Questions & Answers

It's an unlocked Galaxy S10 AT&T G973U..
I am using it internationally and not with an AT&T sim, so I don't try to upgrade it OTA anymore..
I tried Smart Switch, it says it's up to date. But last security patch was April 2019 and it's running Android 9.
Build and Baseband: G973USQU1ASD7 (According to SamMobile) there's no Android 10 for this baseband.
But my question is, can I flash let's say USA (Android 10) G973USQU3CTB1 or would I need to wait for the baseband for my model?
If I missed something, feel free to correct me.
Thanks!

Having a "U" model means Universal. You can flash any U.S. carrier stock firmware to it. If you have AT&T firmware and want to use T-mobile firmware instead, you can do it by flashing it with Odin.
You can get most firmwares off Sam mobile (Verizon, Sprint, T-mobile). AT&T firmware is hard to come by and you will usually have to pay to get it from a pay site like www.gsm2file.com
Just download an Android 10 firmware and flash it. No matter what it is as long as it's for the U model line.

StoneyJSG said:
Having a "U" model means Universal. You can flash any U.S. carrier stock firmware to it. If you have AT&T firmware and want to use T-mobile firmware instead, you can do it by flashing it with Odin.
You can get most firmwares off Sam mobile (Verizon, Sprint, T-mobile). AT&T firmware is hard to come by and you will usually have to pay to get it from a pay site
Just download an Android 10 firmware and flash it. No matter what it is as long as it's for the U model line.
Click to expand...
Click to collapse
Ok, thank you very much.
And is "USA" only unbranded? I don't want any bloatware since I am international and I don't benefit from anything they offer.

The G973U phone will only accept U.S. firmware (Verizon, Sprint, At&t, T-mobile, Spectrum, Xfinity, and unlocked U1 Samsung firmware). So if you flash the U1 unbranded firmware you will get rid of carrier bloatware.

StoneyJSG said:
The G973U phone will only accept U.S. firmware (Verizon, Sprint, At&t, T-mobile, Spectrum, Xfinity, and unlocked U1 Samsung firmware). So if you flash the U1 unbranded firmware you will get rid of carrier bloatware.
Click to expand...
Click to collapse
Say I wanna get rid of the bloatware, what firmware do I select from the U1 variants? Because I see all of them have carrier names.

If you get it from sam mobile it's XAA from Unknown. The latest is the CTB5 bootloader. I think there's also a thread in the forums here that contains Odin firmware.

jannamain1 said:
It's an unlocked Galaxy S10 AT&T G973U..
I am using it internationally and not with an AT&T sim, so I don't try to upgrade it OTA anymore..
I tried Smart Switch, it says it's up to date. But last security patch was April 2019 and it's running Android 9.
Build and Baseband: G973USQU1ASD7 (According to SamMobile) there's no Android 10 for this baseband.
But my question is, can I flash let's say USA (Android 10) G973USQU3CTB1 or would I need to wait for the baseband for my model?
If I missed something, feel free to correct me.
Thanks!
Click to expand...
Click to collapse
Here is the latest SM-G973U Android 10 firmware. It was just released yesterday morning. https://samfrew.com/download/Galaxy__S10__/f6o3/VZW/G973USQS3CTB5/G973UOYN3CTB5/

Related

Note 9 T-mobile possible to get rid of bootlogo?

Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
LennartL said:
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
Click to expand...
Click to collapse
You can flash it using modded or patched ODIN to the U1 non-carrier firmware to get rid of the T-Mobile boot animation. It will also remove the T-Mobile video calling dialer though but WiFi Calling will still work.
What he said^^^ flash the U1 firmware. Note your device will be wiped.
Sent from my SM-N960F using Tapatalk
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
LennartL said:
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
Click to expand...
Click to collapse
Do not use the one labeled TMB U1. That firmware isn't official and could potentially break OTA's. You want to use the U1 XAA with the same version or newer bootloader than what your device currently has. The the first character of the last five characters of the build number contains your bootloader version. I don't believe the Note 9 has a v2 bootloader yet, but I have only really followed ATT U firmware, U1 firmware, and TMB U firmware. When you flash, do not use the HOME_CSC! remember your device will be wiped and factor reset so back up what you want before starting.
I'm running the TMB U1 firmware. No bloat or boot screens and I get OTAs around the same time as the U t mobile devices. I honestly dont see a real difference from the XAA u1 vs the TMB U1 firmware to be honest
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
LennartL said:
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
Click to expand...
Click to collapse
The non-branded firmware is the U1. The reason the modded or patched ODIN is needed is to skip the check that you are flashing the same carrier firmware. The hardware for the US and Canadian models are exactly the same. The firmware on Sansung's page isn't meant for flashing in ODIN.
Although I have only seen one user experience issues with the TMB U1, which for some reason, gave him a modded software warning when they tried to check for updates. I would stick to using the actual non-carrier specific firmware, which has T-Mobile's WiFi Calling and still has band 71 enabled.
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
LennartL said:
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
Click to expand...
Click to collapse
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
LennartL said:
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
Click to expand...
Click to collapse
That's correct! The U1 non-carrier firmware is like a stepping stone, If you want to move from one U firmware to one from a different carrier, you need to flash to U1 first and always make sure you never use the HOME_CSC. The HOME_CSC doesn't wipe the device, which can cause a number of issues when converting. Being on the U1 though, makes it very easy to go back to any U firmware because you are already at the point where you could just straight flash to any U or W firmware as long as the bootloader version is the same or newer than what your device has at that time.
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
LennartL said:
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
Click to expand...
Click to collapse
The HOME_CSC prevents wiping while flashing. If you skip the wiping part, you risk having no data, no potential cellular connectivity, no different unlocked bands for the firmware you are flashing to, etc. You pretty much put yourself in a position where you have to flash again, but actually use the other CSC to ensure your device works properly.
Any unlocked USA note 9s willing to upload there modem files somewhere wanna try and make a sim unlock
Help on Flashing Tmobile firmware on Unlocked Note 9
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
lguti46 said:
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
Click to expand...
Click to collapse
Yes you can. Use ODIN to flash the T-Mobile firmware. It's that simple. You don't need an unlocked bootloader or root. No it won't trigger Knox.
If you need detailed instructions, they have been posted in some of the firmware threads here, o you can go to the Note 8 forums and read through the carrier switching thread. Just follow the steps for flashing carrier firmware. The steps are all the same, you just make sure you're using the right firmware for your device.
Thank you so much! I was able to successfully flash to T-Mobile using the forum threads.
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
LennartL said:
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
Click to expand...
Click to collapse
That's because U1 XAA is on ARJ9. There won't be a U1 Firmware with an ARH6 build number.

Note 9 N9600 SDM845 HongKong Version to N960U1 firmware ?

Hello,
I have a Note 9 N9600 SD845 HongKong Version, I am using Lyca Mobile sim( Tmobile MVNO) with it .
I have gone through this forum and could not figure out if its possible to install the N960U1 firmware on N9600.
If yes, will it activate all the tmobile bands on N9600 ?
I also have a ATT unlocked note 9 N960U, I have flashed it to N960U1 successfully using Odin. Is it the same process for N9600 ?
Thanks in advance
I there, I have the same phone model and the conclusion that I made was that you can't just flash the u1 firmware like how awe are used to. I had to root mine in order to install tmb software. I then had 4g Lte and wifi calling, but before you root look at what you may be missing out on. It is usaully stuff dealing with knox i.e samsung pay, secure folder, etc.
batsup606 said:
I there, I have the same phone model and the conclusion that I made was that you can't just flash the u1 firmware like how awe are used to. I had to root mine in order to install tmb software. I then had 4g Lte and wifi calling, but before you root look at what you may be missing out on. It is usaully stuff dealing with knox i.e samsung pay, secure folder, etc.
Click to expand...
Click to collapse
Thanks for your response
I dont need Samsung Pay but after flashing to u1 would I get OTA updates or every time will have to update manually for the monthly security patches
Funkypoopsy said:
Hello,
I have a Note 9 N9600 SD845 HongKong Version, I am using Lyca Mobile sim( Tmobile MVNO) with it .
I have gone through this forum and could not figure out if its possible to install the N960U1 firmware on N9600.
If yes, will it activate all the tmobile bands on N9600 ?
I also have a ATT unlocked note 9 N960U, I have flashed it to N960U1 successfully using Odin. Is it the same process for N9600 ?
Thanks in advance
Click to expand...
Click to collapse
No
Funkypoopsy said:
Thanks for your response
I dont need Samsung Pay but after flashing to u1 would I get OTA updates or every time will have to update manually for the monthly security patches
Click to expand...
Click to collapse
Unless you flash the official Samsung software using Odin, you will not be able to install OTA updates. But from my understanding you can't flash USA U1 firmware onto the Hong Kong/International N9600 Note 9. The bootloader will only accept firmware for their respective models. All U.S. Note 9's can flash any of the carrier versions or the unlocked U.S. firmware, but you can't flash the international N9600 firmware... and vice versa.

Questions about flashing unlocked firmware to my G973U

Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it
cggamer1 said:
Please excuse any mistakes I make as this was my first time flashing firmware. So anyway, I have a Verizon S10. I got tired of Verizon’s bloat and all the missing stock features so I flashed the Unlocked Firmware from Sammobile. As I had no prior experience, I did research and came to download the latest U1 firmware with the XAA CSC. I know there’s a U1 version with the Verizon CSC, but I decided to use the XAA version because I knew it was universal. Now I could be totally wrong on this, but isn’t at least one of the three CSCs supposed to be XAA? All mine are still VZW, just like it was on the original carrier fw. I even tried taking the Sim out and reflashing, but no luck. The phone is still locked to Verizon, could that be why? The problem is, can I still get OTA updates? How can I stay on unlocked firmware and get them? Did I mess up and should’ve flashed the VZW U1 fw? Is this fw all vzw cscs too and I just messed up somewhere else? I have the pda of the xaa version with the csc of the vzw version. I don’t know what to do. I would’ve loved to install the one ui beta now that I’m in unlocked fw, but I can’t because my active csc is version, who blocked it
Click to expand...
Click to collapse
Some answers to your questions:
1. I don't know, it should flash a data partition that's for the unlocked firmware. I remember reading that somewhere here in the forums.
2. I think Verizon phones are more locked than the others, but I could be wrong.
3. You can get the OTA updates on the unlocked firmware, you just have to have a SIM inserted.
4. You may have, do a factory reset in recovery and try flashing this with that special version of ODIN:
https://www.androidfilehost.com/?fid=1899786940962609128
5. U and U1 firmware are different, sort of. U is carrier and U1 is unlocked.

Frimware S20 FE 5G

Does anyone know of a good, easy p[lace to get the firmware for our beloved Galaxy S20 FE 5G?
mine is SM-G781U (actualy purchased though Boost Mobile- Soon to Dish)
Have seen some newer sites that claim, they have the files. However, not sure why their files seem not 100% after downloading the package. About 6.1Gbs for complete Rom, so far, but not able to actually use the darn thing. Odin has issues with the files.
So, if anyone actually knows where we can get firmware for our phones, I would be rather happy.
Tanx!
No offense, but: Just search here at XDA. There are at least two good tools - 'Frija' and 'SamFirm Reborn'.
"Frija" might do the trick. I know that the samfrim is not up to date, and may have stable issues...
I thank you for the pointers
I prefer Sanfirm, the 'Reborn' version is fast and stable.
Following this post. Frija is good but can any provide info on where to get ATT Firmware?
lokofly said:
Following this post. Frija is good but can any provide info on where to get ATT Firmware?
Click to expand...
Click to collapse
I use https://samfw.com/firmware/SM-G781U
now we can flash SM-G781U or SM-G781U1 ......SM-G781U1(factory unlocked from samsung) is the same as the G781U in all carriers.... now to get the carrier specific bloat updates or switch to other carrier to check out their bloat and updates download and only flash USER DATA file the correct SM-G781U CSC version (TMB SPR USC TMK XAS) USC is at&t in the us.... so AP BP CP and CSC from every firmware available for G781U are the same files and can be mismatched with other userdata.... now the unlocked firmware G781U1 has all carrier variant's built in triggered by Sim card insertion provisioning at boot
the website has march security update as the latest and the at&t website has two more so whenever somebody uploads latest the website will be updated and generally they are 3weeks behind the carrier..... This will not void warranty or trip Knox will not carrier unlock or unlock bootloader and if you have updated to latest bootloader rev3 then bootloader unlock is not available on the paid service
Or www.sammobile.com
[email protected] said:
I use https://samfw.com/firmware/SM-G781U
now we can flash SM-G781U or SM-G781U1 ......SM-G781U1(factory unlocked from samsung) is the same as the G781U in all carriers.... now to get the carrier specific bloat updates or switch to other carrier to check out their bloat and updates download and only flash USER DATA file the correct SM-G781U CSC version (TMB SPR USC TMK XAS) USC is at&t in the us.... so AP BP CP and CSC from every firmware available for G781U are the same files and can be mismatched with other userdata.... now the unlocked firmware G781U1 has all carrier variant's built in triggered by Sim card insertion provisioning at boot
the website has march security update as the latest and the at&t website has two more so whenever somebody uploads latest the website will be updated and generally they are 3weeks behind the carrier..... This will not void warranty or trip Knox will not carrier unlock or unlock bootloader and if you have updated to latest bootloader rev3 then bootloader unlock is not available on the paid service
Click to expand...
Click to collapse
same procedure I only used the SM-G781U1 model
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U1 Free Download
Samsung Galaxy S20 Fan Edition 5G Firmware Download SM-G781U1 Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
I used the CSC XAA, which is free from the factory by Samsung for USA, and currently I receive all the updates automatically without problems, I am from Mexico
I'm just updating to this version that just appeared to me:
G781U1UEU3DUD2
BUILD DATE
20210408090336
ADD DATE
2021-04-27 00:46:37
The post above says CSS=USC is ATT but that's US Cellular. I am looking for the the ATT version as I am not getting HotSpot on my unlocked FE S20 SM-G781U (XAA). I want to flash to the ATT version but when I tred the one on https://samfw.com/firmware/SM-G781U1/ATT made no difference. I see the SW version to have ATT/ATT/XAA. The trick to use *#272#IMEI*#* does not work , I do not get the preconfig. My phone was bought in the USA directly from samsung. I m suprer frustrated with ATT . Hot spot works on my wife's iphone wiht my SIM
Any pointers from some one who has got Hot Spot working that would be great. I got Wifi Calling working outof the box but no VVM

Can I flash a S10 G973U with G973U1 firmware please ?

Hi Folks,
I have bought a G973U samsung S10 but it is not receiving any updates and I am obliged to flash it with ODIN, I heard that I can technically flash G973U1 XAA firmware on it and it will update via OTA, is this true please ? I have the SPR firmware on it. Thanks for your help.
Depends on the carrier. ATT (I assume you're in the USA?), for example, won't do OTA updates unless the IMEI also matches (and maybe some other switches at ATT that we can't change).
XAA should update on some carriers, at least. My XAA updates on TotalWireless (VZ MVNO)... I've actually blocked them because I want to stay on A11 for now.
I believe you can upgrade via ODIN yourself without using an OTA - just be sure to use the HOME_CSC file because the non-home CSC will wipe your data. Any reason you're not doing that? This way, you can control your own updates and timing.
Hello Sofiene.Saidi, look at the official US firmware here for your model, the best thing for you is to take a model for your European region.
us firmware link
Download Samsung Galaxy S10 SM-G973U USC USA (US Cellular) G973USQU6IVE7 firmware
Fast download latest Samsung Galaxy S10 firmware SM-G973U from USA (US Cellular) with G973USQU6IVE7 and Android version 12
www.sammobile.com
I bought a G973U in Switzerland and it has XAA firmware on it. I think it is an ATT unlocked device but I have never had a single Software Update.
meric57 said:
Hello Sofiene.Saidi, look at the official US firmware here for your model, the best thing for you is to take a model for your European region.
us firmware link
Download Samsung Galaxy S10 SM-G973U USC USA (US Cellular) G973USQU6IVE7 firmware
Fast download latest Samsung Galaxy S10 firmware SM-G973U from USA (US Cellular) with G973USQU6IVE7 and Android version 12
www.sammobile.com
Click to expand...
Click to collapse
Thanks Meric ! But how can I know which is the best for my region ? I am in France actually ! Many thanks
Fast_Lessy said:
I bought a G973U in Switzerland and it has XAA firmware on it. I think it is an ATT unlocked device but I have never had a single Software Update.
Click to expand...
Click to collapse
Hi Fast, same for me XAA ATT but SPR (SPRINT firmware), everything is working fine except Sapm protection which is greyed
schwinn8 said:
Depends on the carrier. ATT (I assume you're in the USA?), for example, won't do OTA updates unless the IMEI also matches (and maybe some other switches at ATT that we can't change).
XAA should update on some carriers, at least. My XAA updates on TotalWireless (VZ MVNO)... I've actually blocked them because I want to stay on A11 for now.
I believe you can upgrade via ODIN yourself without using an OTA - just be sure to use the HOME_CSC file because the non-home CSC will wipe your data. Any reason you're not doing that? This way, you can control your own updates and timing.
Click to expand...
Click to collapse
Thanks for your anwser Schwinn, actually it is fine with ODIN but each time I need to flask aprroximately 6Gb of firmware, it is somehow risky isn't it ? Can I flash USC firmware and get OTA updates please ?
If you're in France, I don't think you'll ever get OTA updates.
No, flashing the ROM a few times over the phone's life isn't going to affect the device that much. If you did it every day, then sure... but a few flashes over the life of the phone won't make much difference. I recommend you just do the updates yourself with these files and don't worry about the OTAs, because you are unlikely to get them.
schwinn8 said:
If you're in France, I don't think you'll ever get OTA updates.
No, flashing the ROM a few times over the phone's life isn't going to affect the device that much. If you did it every day, then sure... but a few flashes over the life of the phone won't make much difference. I recommend you just do the updates yourself with these files and don't worry about the OTAs, because you are unlikely to get them.
Click to expand...
Click to collapse
Great, thanks a lot and anyways one day the OTA updates will stop Have a great day.
Sofiene.Saidi said:
Hi Fast, same for me XAA ATT but SPR (SPRINT firmware), everything is working fine except Sapm protection which is greyed
Click to expand...
Click to collapse
I installed google phone and messages apps and I have the spam protection too !!!!

Categories

Resources