So flashed my tencent ROG 2 since the very first version of the global rom. Now i want to upgrade its version to the 1907 to recieve updates on the phone. now my issue is when im trying to flash it thru fastboot. it fails. it starts up a bit for 5-10seconds then the cmd window closes.
with "FAILED, fastboo.exe flash all WW ............. failure. EXIT"
then a notepad appears on the folder some kind stating of what the problems was i guess. but at the end of the note says "error: raw signature fail or pkd id mismatch.
HELP please. thanks a lot.
Related
Hi, I'm new in here..
wanna ask some question.
last year, my friend bought Mi 5X from Online shop (obviously, not an official store from that online shop)
when he receive the phone and trying to check for miui updates, the pop-up message window keep showing when we tried to check the update, its said "connect to WLAN", even we already connected to the wifi network.
if i really correct, the miui version still miui 8 but with 5 digit number of the version.
Then, we already tried to unlock the phone in the same day. And the result we cannot unlock the phone.
is this possible change to another ROM (probably using from xiaomi.eu site) ?
Thanks!
So..R U Chinese?
Your English is bad..
According to your question, your Mi 5X cannot update to the latest MIUI version..And cannot unlock bootloader.
And there is another way to update MIUI, you can first download the latest MIUI full-size zip which fits your phone on miui.com (DO NIT EXTRACT),and launch 'System Update' app, press the three points at the edge, then choose 'choose zip from SD card
' and then choose the downloaded MIUI full-size zip ,then you can update offline.
如果
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Evening all!
I bought a new Rog phone 2 this week from ebay. Sold as new from the UK.
Its the 12gb / 512gb version of the phone. Its says tencent on the back of the phone but appears to have a ww firmware installed. This is 1908 something or other
Doing an update ota says nothing is available, and downloading a newer ww update and trying to install by recovery doesn't work either as I don't even get the option to update. I only get power off, reboot, wipe data factory reset or reset bootloader. Nothing to allow me to update.
Has this phone been messed with prior to my buying it?
I only ask because there are couple of apps I'd like to use like Netflix etc, that just won't allow me to install from the play store.
kristianity77 said:
Evening all!
I bought a new Rog phone 2 this week from ebay. Sold as new from the UK.
Its the 12gb / 512gb version of the phone. Its says tencent on the back of the phone but appears to have a ww firmware installed. This is 1908 something or other
Doing an update ota says nothing is available, and downloading a newer ww update and trying to install by recovery doesn't work either as I don't even get the option to update. I only get power off, reboot, wipe data factory reset or reset bootloader. Nothing to allow me to update.
Has this phone been messed with prior to my buying it?
I only ask because there are couple of apps I'd like to use like Netflix etc, that just won't allow me to install from the play store.
Click to expand...
Click to collapse
Check your device fingerprint matches your rom, you need to have fingerprint matching your WW rom.
Use device info hw from playstore to check. It's under system, you need your rom, fingerprint and product id to match
get it here
My product ID says CNi 001D
Fingerprint is CN 1908
Software is WW 1908
kristianity77 said:
My product ID says CNi 001D
Fingerprint is CN 1908
Software is WW 1908
Click to expand...
Click to collapse
Then you need to change fingerprint to WW too...
https://forum.xda-developers.com/ro...check-change-fingerprint-cn-to-t4002279/page9
I have different issues; no update even though my HW displays as below:
Product ID: WW_l001D
Finterprint: asus/WW_l001D/ASUS_l001_1.9/PKQ1... (Firmware version)
Device: ASUS_l001_1
What do I need to do for manual OTA?
lavenderyew said:
I have different issues; no update even though my HW displays as below:
Product ID: WW_l001D
Finterprint: asus/WW_l001D/ASUS_l001_1.9/PKQ1... (Firmware version)
Device: ASUS_l001_1
What do I need to do for manual OTA?
Click to expand...
Click to collapse
For the latest .44 you'll need to download the raw rom, extract it to root of c drive, remove or delete the original zip from the same folder (if it's in there), then run flashall_AFT.cmd, wait 5-10 minutes then the phone will restart once it's done. You won't lose any data...
Find the raw rom in this thread...
https://forum.xda-developers.com/rog-phone-2/how-to/raw-ww-1910-44-download-t4009293/page2
Thanks. I've successfully upgraded it.
lavenderyew said:
Thanks. I've successfully upgraded it.
Click to expand...
Click to collapse
Excellent!
First off - Mods, I have the original box and sticker IMEIs if needed as proof.
I have been flashing between AOSP and Stock trying to fix a Microphone bug on my phone (see previous posts), when all of a sudden my phone will no longer connect to Network (IMEI unavailable error)
I went through every QCN backup + editing I could think of, even using my friends Mi 9 that we both bought from the same place in China as a QCN backup + my IMEI edits.
Everytime I edit the QCN and load it, the phone just boot loops immediately shutting down upon OS load. Using MiFlash back to stock didn't work, and I had to flash Evo X rom to get it to boot normally now, but I"m also missing WiFI MAC onto of my IMEIs.
I seriously have no idea what to do. I've tried every IMEI editing tool or Hex Editor in the book to put my original IMEIs back in to no avail. What am I doing wrong that cases it to restart loop when I push my updated QCN file?
Thanks in advance - Can provide whatever else you need.
AZ_Miss_Murder said:
Using MiFlash back to stock didn't work
Click to expand...
Click to collapse
As i understand you have China version of Mi 9, saying: "MiFlash back to stock didn't work" you meаn you have flashed official xiaomi china FASTBOOT ROM and it did't work?
Then i afraid the problem is deeper then in the ROM. Because by flashing stock fastboot ROM you flash everything that possible to flash, ROM and all images, with all setting like it was from the store.
g_seva said:
As i understand you have China version of Mi 9, saying: "MiFlash back to stock didn't work" you meаn you have flashed official xiaomi china FASTBOOT ROM and it did't work?
Then i afraid the problem is deeper then in the ROM. Because by flashing stock fastboot ROM you flash everything that possible to flash, ROM and all images, with all setting like it was from the store.
Click to expand...
Click to collapse
Correct. Reflashing China ROM in Fastboot does not fix the problem. It fixes the bootlooping but not the IMEI issue.
I cross-flashed my v405ua (ATT) to the V405EBW30b_00_OPEN_EU_DS_OP_0806.kdz in an effort to get rid of the start-up error (current version) but the error still remains. Now I'm unable to flash back or to any other Kdz file, I get this notice Not support cross model download. It's not the start up error that concerns me, it's that I can not flash any other variant. I got the start up error after flashing from pie to Android Q (error: Current version not available for user. can't find matched carrier)
What can I do to fix this not being able to flash another Kdz file? Any ideas?
Gabriel51 said:
I cross-flashed my v405ua (ATT) to the V405EBW30b_00_OPEN_EU_DS_OP_0806.kdz in an effort to get rid of the start-up error (current version) but the error still remains. Now I'm unable to flash back or to any other Kdz file, I get this notice Not support cross model download. It's not the start up error that concerns me, it's that I can not flash any other variant. I got the start up error after flashing from pie to Android Q (error: Current version not available for user. can't find matched carrier)
What can I do to fix this not being able to flash another Kdz file? Any ideas?
Click to expand...
Click to collapse
Yes, to do a crossflash, u need the 1.14 dll version of patched lgup. U probably have that as you've already done a crossflash. To flash back, u need the patched lgup with dll 1.16. It's newer and recognizes the newer rom u crossflashed to.
The other issue u mention, the error on startup. I've found that if I crossflash (partition dl) to the rom I want, let it finish (which means it reboots), then shut it off and use lgup to do a 'refurbish' with the exact same rom u crossflashed to, then u won't get the message.
It sounds kind of convoluted, I know. But it seems the 'refurbish' propagates some of the values from partition to partition, where the part dl does not.
cheers
Yes I have been using patched 1.14, I'm looking for patched 1.16 now. Thanks
The EBW30b works well, I will try the method you mentioned to get rid of the start up error. (If I understand it correctly)
I cannot find patched lgup with dll 1.16. anywhere?
I did fine the patched 1.16 however I still get the cross flash error "CrossDL"
Gabriel51 said:
I did fine the patched 1.16 however I still get the cross flash error "CrossDL"
Click to expand...
Click to collapse
hmmmm, try doing it with the 1.14 version, choose part D/L and select everything but the ftm partition. Then do a refurbish with same kdz. See if that works.
I tried every option with the patched 1.14 version as well however I selected all items with the D/L option. Will omitting ftm be that much different?...
It seems no matter what I do with any lgup file it gets to 4% and then gives me the crossDL error. I wish it would just ignore what ever version I'm using. Thanks
Gabriel51 said:
I tried every option with the patched 1.14 version as well however I selected all items with the D/L option. Will omitting ftm be that much different?...
It seems no matter what I do with any lgup file it gets to 4% and then gives me the crossDL error. I wish it would just ignore what ever version I'm using. Thanks
Click to expand...
Click to collapse
Here's a thread, and another one to look in for a version of 1.14 that should work. In this thread there's talk about the start up error.
Should have mentioned earlier, the startup error doesn't hurt anything, and you only see it briefly after rebooting the phone. Others have just lived with it.
But, as said, it's the part d/l and then do a refurbish that gets rid of it, so check the other threads to find a version that will work. The ftm exclusion isn't necessarily critical, but some have lost their imei / and or serial due to cross flash and excluding ftm usually avoids that.
hopefully you've read the threads about doing this prior, as they do suggest to backup your boot, abl, laf, ftm, fsg, modem, modemst1 and modemst2 partitions first.
cheers
One of those options I had already tried but no success until about an hour ago.
https://mylgphones.com/how-to-flash-stock-pie-kdz-firmware-on-lg-v40-thinq-with-lgup.html?amp
These instructions got me where I needed to be with ease. It seems that some KDZ files cross flash easy but cross flashing from them is difficult as I have tried everything from everywhere.
I appreciate you effort to help.
====================================================
Attachment contains process
I bought a LM-V450ebw Dual SIM with android 8x, probably HongKong distribution. I've beed trying to flash it to EU/Polish ROM (android 10) with no possitive effect (I want to have volte and wifi calling - that's the main reason to update).
I've beed trying LGUP 1.14-1.16 with different LGDLL but no way to overcome "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Finally I tried to update to android 10 Hong Hong version and I succeeded (v30b-lao-yt). But still no success in moving to EU/Polish ROM (android 10) via LGUP - "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
It looks like, there is no problem to move between HK version but no way to move from HK -> UE/Polish.
Of course LG Bridge doesn't help much.
What's wrong? Is there any way to do it without rooting?
pjgadek said:
I bought a LM-V450ebw Dual SIM with android 8x, probably HongKong distribution. I've beed trying to flash it to EU/Polish ROM (android 10) with no possitive effect (I want to have volte and wifi calling - that's the main reason to update).
I've beed trying LGUP 1.14-1.16 with different LGDLL but no way to overcome "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Finally I tried to update to android 10 Hong Hong version and I succeeded (v30b-lao-yt). But still no success in moving to EU/Polish ROM (android 10) via LGUP - "error: 0x6004, crossdl open_hk_ds>open_eu_ds"
It looks like, there is no problem to move between HK version but no way to move from HK -> UE/Polish.
Of course LG Bridge doesn't help much.
What's wrong? Is there any way to do it without rooting?
Click to expand...
Click to collapse
For most of the variants all that's needed to crossflash is to use 1.14 and choose 'partition download'. But the HK dual sim variant is a pia. You can lose one or both sims if not done correctly.
I'd suggest, in rom forum see initial thread for lineage os and find invite to join v40 tele group. Ask there as those guys have much more international experience especially with dual sim variants.
cheers
Similar problem wit a new LM-V405EBW running Android 9 sec patch 1 June 2019
It is supposed to be an European version, came with a EU charger ...
Current software V20a-LAO-YT
Checked with a IMEI checker that said it is a DEC region phone.
It seems LG has removed V40 Thinq from the supported devices,
cannot get any OTA updates :-(
I want to install V405EBW30d_00_OPEN_EU_DS_OP_1223.kdz
latest DEC firmware I think.
When I try LGUP i get the same error mess as above
"error: 0x6004, crossdl open_hk_ds>open_eu_ds"
Tried both "refurbish" and "update" same error.
I don't mind to wipe the phone clean,
but when i select the "Partition DL" i get more than 10 options,
which one(s) should i select ?
Hope I can get some advice.
LG_User_42 said:
Si
I don't mind to wipe the phone clean,
but when i select the "Partition DL" i get more than 10 options,
which one(s) should i select ?
Hope I can get some advice.
Click to expand...
Click to collapse
all of them except ftm. Then, when it finishes and reboots, do the refurbish (twice) with the same kdz.
cheers
Evening! I bring you a solution, it seems a strange solution, but after weeks of trying anyway, the only one that did not occur to me, is to disconnect it while I was flashing the rom that I put wrong to downgrade it, i cause a provocated brick, what is my surprise when insert the IBR rom (before it had the TIM) it started flashing without problem.
Mobile to repair: Lg K41S (LMK410EMW)
Use this version of the LGUP flash tool: LGUP_Dev-1.14 (patch)