Related
[ROM][Stock][ICS]LG P990 v28g Stock ICS flashable zip by harsh & tonyp [DISCONTINUED]
LG P990 Stock ICS flashable zip [DISCONTINUED]
This ROM is discontinued.
If you're looking for a stable ROM I recommend this ROM as an alternative: ParanoidAndroid CM10
It's more up-to-date and smoother than Stock ROMs - but at the same time still rock stable and qualifies as a daily driver.
If you want to continue using a Stock ROM on the GB bootloader I'd recommend to use the updated and actively maintained v30a/b Stock ROM by rugglez.
Some of the work of this ROM went into it - especially the heavily reworked ramdisk.
Using this ROM with the kowalski oldbl kernel does work as well (and fixes the callbug).
I've never intended to support a Stock ROM in the long term - I prefer CM based ROMs by far.
The initial intention of the first version of this ROM was to provide an easy way for people to test the SU660 leaks - back when we didn't even have P990 ICS leaks.
Nowadays that's easy, thanks to tools like the AIO toolbox by spyrosk, but back then it was more complicated for the users - especially with a SU660 ROM as base.
Then harsh & I decided to work on it together and update the initial SU660 base to a P990 v28 one.
A big thanks to harsh with whom I've been working closely together.
What is this?
This is a flashable zip version of the official LG v28g ROM by LG.
It's a Stock LG Android 4.0.4 ROM which uses the default ("old") bootloader and stock ("old") partition layout.
I prefer to stick with the GB layout and old bootloader as pretty much all ROMs, including CM10, are build for that.
If you have used the NVFlash ICS ROM you need to go back to the GB partition layout.
There are two versions. The standard version will fit into the stock GB partition layout.
To make it fit in there we had to remove some apps, including LGEmail, LG Calendar, LGMemo (QuickMemo is still there, don't worry) etc.
If you want to have the full ROM you can use the extended version, but need to increase the /system partition size to 512mb+ beforehand (see here for instructions).
Note that by only changing the partition size the partition layout won't change - so you still can flash other ROMs like CM10.
What's working?
This ROM is considered stable. harsh and I are using it as a daily driver currently!
Full hardware accelleration including:
Working Videocamera
Google Chrome
Videodecoding
etc.
In-call audio
Playstore
LG UI 3.0 & LG 4x lockscreen (THE MOST demanded feature in every dev thread )
Bluetooth
2G/3G
FM Radio
Everything else you can expect from a stable ROM (data, wifi, sms etc.)
What's not working?
slow charging on usb computer connection. Wall charger does work.
Workaround: Power off phone, attach usb cable, boot.
Screenshots (Power + Vol down) are empty. Just use Quickmemo (Vol up + down).
LG Application Manager not fully working and thus not included
The call issue of CM10 ROMs is present for some people.
If you reboot the phone once a day (e.g. at the morning) it usually won't occur during the whole day.
Credits:
Besides harsh thanks (especially for the old versions) to the following people:
(alphabetical order)
Someone missing? PM me asap!
aremcee
bihariel
ergoen
Kostja_V
wkpark
Due to the continuous misunderstanding: This ROM requires you to run the GB (aka the "old") bootloader and partition layout.
If you flashed a ICS ROM (kdz etc.) with NVFlash you need to go back to the old layout and bootloader, for example with this tool:
[TOOL] Full Brick Repair (Clean & Easy)http://forum.xda-developers.com/showthread.php?t=1975274
If you're coming from CM7, CM10, PA, GB (Android 2.3) Stock ROMs etc. this warning does not affect you.
Note:
I fixed the error which required you to use CWM 5.0.2.x for this ROM so you can now use any recovery you want now.
I'd recommend the official CWM 6.0.1.5 Touch or the newest TWRP.
How to install the new CWM:
You can use the ROM Manager to install CWM. But you need ROM Manager premium (or an in-app purchase for ~2$) to be able to flash CWM Touch with it.
You can use this flashable zip to install CWM 6.0.1.5 Touch easily: http://forum.xda-developers.com/showpost.php?p=34263577&postcount=1083
You can use my freshly zipped NVFlash CWM6 touch Recovery flasher (based on Rusty!'s method):
http://goo.im/devs/tonyp/P990-stuff/various/CWM6.0.1.5 touch NVFlash-tonyp.zip
Remove battery, hold both Vol - & Vol +, connect the phone to your notebook and use the "install_cwm6.bat" file (or the matching linux sh install script). APX driver is included.
This will flash CWM without touching any other partition.
Installation (follow carefully!):
Read post 1 and post 2 completely before you're doing anything with your phone!
If it doesn't exist, yet: Create the folder "external_sd" on your internal sdcard.
Reboot once.
Reboot into your recovery.
If you are coming from another ROM than my Stock ICS:
wipe data/factory reset(!)
Install zip from sdcard (flash the ROM)
Reboot (can take a couple minutes)
After fully booting up and going through the setup wizard: Restart your phone once again
Don't touch the RIL! And don't mind the "Unknown baseband" if everything works. This just means you got one of the older basebands which aren't displayed properly anymore. Nothing to worry about.
If automatic time if off you can either flash the v28g baseband (see my stickyied thread) or disable automatic time and use ClockSync.
Download:
standard version (fits into GB's /system partition):
http://goo.im/devs/tonyp/P990-stuff/ICS
extended version ("full" version requires /system of 512+ mb):
http://d-h.st/CVb
Changelog:
Code:
[u]version 3.01[/u]
[LIST]
[*]build.prop lines added to identify it as P990 device in the ROM Manager
[/LIST]
[u]version 3.0[/u]
[LIST]
[*]updated to v28g
[*]CWM Encryption error fixed (you can use any recovery now)
[*]kernel updated. fixes the bluescreen issue and some bugs & memory leaks
[/LIST]
[u]version 2.0[/u]
[LIST]
[*]complete new version based on the v28e leak
[*]no more korean SU660 files, pretty much all bugs are fixed
[*]thanks to harsh who build this version!
[/LIST]
[u]version 0.98[/u]
[LIST]
[*]bsod on screen off fixed (thx arcee!)
[*]huge update to the updater-script
[*]now pre-rooted
[*]Playstore updated
[*]Stock Messaging app replaces LG's one
[*]added Stock LG Browser
[*]added LGAlarm
[*]removed Google TTS
[/LIST]
[u]version 0.81[/u]
[LIST]
[*]typo fix in the updater-script
[/LIST]
[U]version 0.8[/U]
[LIST]
[*]initial release
[*]A mix between the final SU660 v30c ROM and the P990 ICS leak
[*]custom kernel to let it boot with the old bootloader
[/LIST]
Old installation instructions for versions prior to 3.0 (which was way more complex):
Installation (follow carefully!):
Read post 1 and post 2 completely before you're doing anything with your phone!
Create the folder "external_sd" on your internal sdcard.
You need to use ClockWorkMod 5.0.2.x
TWRP & CWM 6.x will result in encryption errors (something to investigate later)
use e.g. RomManager, scroll to the bottom, choose "older recoveries" and install 5.0.2.0
Backup your current ROM
wipe data/factory reset
mounts and storage - format /system
Install zip from sdcard (flash the ROM)
remove the usb cable from the mobile phone!
(if you boot with the phone connected to your PC the PC will either freeze or show you a bluescreen!)
Reboot (can take a couple minutes)
After the setup wizard go to Settings - Connectivity and change the USB connection type to MTP
(now you can attach the phone back to your PC).
Restart your phone
Don't touch the RIL! And don't mind the "Unknown baseband" if everything works. This just means you got an older baseband which aren't displayed properly.
If automatic time if off you can either flash the v28e baseband or disable automatic time and use ClockSync.
Thanks man.
i'll try this and feedback later
thx i'm test:good:
Thanks man. I'll try whether the USSD code is usable or not. This is important for a prepaid user like me.
Sent from my LG-P990 using xda app-developers app
yeah baby
tonyp said:
It's possible that in-call audio is not working! It's too late to call someone to test it.
Click to expand...
Click to collapse
downloading now, will flash and call myself (landline) and report back
I get almost 40kb/s so I think it's gonna be a while
Thank u. Will try
Sent from my LG-P990 using xda app-developers app
flashing...
Damnit, I had it at the USB cable the whole time. I just realized the ROM will bsod when going into deep sleep.
This is a kernel issue due to the GB bootloader.
So this is mainly a "let's check out how ICS works" ROM at the moment
Doesn't deserve an own thread. I can't yet close my own thread, will have to ask a mod about it.
no go then
will check tomorrow for any news
dont worry, you did a amazing job by make it flashable
go get some sleep you deserve it and thanks you again for your hard work :good: :fingers-crossed:
unkown function "uassert"
I wanted to try this anyways(despite the BSOD issue). Installation aborted with (Status 6). Logs show
Code:
line 1 col 89: unknown function "uassert"
1 parse errors
I wiped data and was on CM9 PA rom before. Tried toggling script asserts in recovery but same results.
Let me know if I am missing something? [busybox maybe?]
Edit: Maybe this is a recovery issue, I am on 5.0.2.7, but never had this issue before with any other roms.
Fix: Just use the 0.81 build or modify the update-script as described in the post below.
Aj264 said:
I wanted to try this anyways(despite the BSOD issue). Installation aborted with (Status 6). Logs show
Code:
line 1 col 89: unknown function "uassert"
1 parse errors
I wiped data and was on CM9 PA rom before. Tried toggling script asserts in recovery but same results.
Let me know if I am missing something? [busybox maybe?]
Click to expand...
Click to collapse
This is a simple mistake I made resulting of me being tired.
I did some last minute modifications of the update-script file (to ensure no P999 or SU660 users try and install it) and unfortunately wrote uassert instead of assert.
You can either fix it yourself: Goto META-INF/com/google/android/updater-script and remove the first character (the "u").
Or download v0.81.
goo.im is a great hosting service and offers me remote ssh access via a linux terminal - so I just unzipped the ROM, fixed the line and rezipped it as v0.81. No need to re-upload
Please reply if it works.
v0.81 of this rom is release i didn't even finish to download the first build and another build is uploaded thanks tonyp download speed is 40kbps so it take a while to test it
Tonyp is one of my favourite guy, there is a reason behind and thats he is simply amazing!
Thank u man. Now ppl can flash it w/o worries and fear
Sent from my LG-P990 using Tapatalk 2
grimmyrippy said:
v0.81 of this rom is release i didn't even finish to download the first build and another build is uploaded thanks tonyp download speed is 40kbps so it take a while to test it
Click to expand...
Click to collapse
Oh, goo.im slow again. A couple hours ago I had full speed.
If someone wants to provide a mirror feel free to do so, I'm out now really.
The v0.81 zip is untested, I hope it works the way I did the change remotely. If it doesn't use 0.80 and apply the manual fix I posted in my last post.
Open the updater-script with a texteditor like Notepad++.
Use build 0.81
tonyp said:
This is a simple mistake I made resulting of me being tired.
I did some last minute modifications of the update-script file (to ensure no P999 or SU660 users try and install it) and unfortunately wrote uassert instead of assert.
You can either fix it yourself: Goto META-INF/com/google/android/updater-script and remove the first character (the "u").
Or download v0.81.
goo.im is a great hosting service and offers me remote ssh access via a linux terminal - so I just unzipped the ROM, fixed the line and rezipped it as v0.81. No need to re-upload
Please reply if it works.
Click to expand...
Click to collapse
thanx, i'll modify the update script and try. I also thought it should be assert but refrained on commenting lest you had defined your own macro.
Thank you for your hard work. :good:
Edit: Can confirm that modifying updater-script manually works. Using stock ICS now. Cheers.
Somebody who has installed it, could try running playing song through music player before screen lock?
Does music/song keep playing continuesly after screen locks and after 2-3 mins does the phone wakeup by pressing unlock key or still BSOD?
Definately unplug usb cable before doing this
Sent from my LG-P990 using Tapatalk 2
COLOSSUS™
A ROM for MediaTek MT6589 Android devices.
© 2014 REMZEJ. All rights reserved. All other trademarks are the properly of their respective owners.
Officially Ported by NRUPESH2912
Highlights
- Note 3 UI and features
- 13MP full screen main camera and 5MP front camera
- 3G dual sim and dual standby
- Advanced Power Menu
- HTC Sense 4-Style Task Switcher
- Dolby, xLOUD and ViPER4Android FX audio effects
- Swipe to Call and Swipe to Message
- Smart stay
- Multi window
- Air command
- Note 3 lock screen
- SAMSUNG Fonts
- KitKat logo
- Fully deodexed and zipaligned
- init.d support
- Busybox installed
- Fully rooted
- No bloat-wares
- And many more...
Feature updates to follow
- Full gesture support
- Smart scroll
- etc...
Known issue(s):
- Unfortunately, System UI to stopped intermittently. Read FAQ(S) regarding this issue.
PLEASE READ CAREFULLY:
This custom ROM is FREE and NOT FOR SALE. You should not pay to anyone who will install this ROM to your device. To all interested developers/porters who want to make use or port this ROM to other devices please contact remzej.
Download Links:
Mediafire
Credits:
- Remzej
- Needrom especially to Dekdroid
- xdadevelopers especially to all contributors
- CyanogenMod
- ViPER520 and zhuhang http://vipersaudio.com
- Bishal Goswami ([email protected])
- Mahendra Chavan ([email protected])
- Noel Macwan and Aniruddh Chandratre
- Amarullz
- Elvies Africano
- SAMSUNG
- HDC
- Sony
- Micromax
- To all others not mentioned but contributed to my work
XDA:DevDB Information
[ROM][4.2.x Jelly Bean] COLOSSUS™ 4.0.0603, ROM for the Micromax Canvas Turbo A250
Contributors
nrupesh2912
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: HDC Galaxy Note 3 SM-N9006
Version Information
Status: Stable
Current Stable Version: 4.0.0603
Created 2014-06-06
Last Updated 2014-06-10
Reserved
INSTRUCTIONS
Instructions to flash via CWM Recovery:
1. Download COLOSSUS™ ROM
2. Copy ROM to internal sdcard
3. Reboot to CWM recovery
4. Select wipe data/factory reset, Yes - Wipe all user data
7. Select advance, wipe dalvik cache, Yes - Wipe Dalvik Cache
6. Select install zip, choose zip from internal sdcard
8. Select ROM, Yes - Install
9. Follow on screen instructions
Instructions to flash via TWRP Recovery:
1. Download COLOSSUS™ ROM
2. Copy ROM to internal sdcard
3. Select Wipe
4. Swipe to Factory Reset
5. Go back to main menu select Install
6. Select Storage
7. Select ROM
8. Swipe to Confirm Flash
9. Follow on screen instructions
Reserved
FAQ(s)
1. How to enable air command?
- Hold capacitive menu button
2. How to use multiwindow?
- Just drag 2 apps from sidebar
3. How to hide / unhide sidebar?
- Just long press the back key button
4. How to install OTA update(s) after downloading?
- Uncheck wipe data and wipe cache before installing OTA update(s).
5. Why do I always experience Unfortunately, SystemUI has stopped?
- If you have facebook messenger installed, drag down chat head(s) to close it then reopen messenger application shortcut to restore System UI back to normal. (Do this if you encounter similar issue with other messenger applications like Viber, Yahoo!, Skype, etc...)
- Another workaround is to install Xposed Installer/Framework and Gravity Box [JB]. Activate Gravity Box [JB] module in Xposed Installer then reboot. Open Gravity Box select Navigation keys actions and set Home key Long-press action to Show recent apps.
- Branded Android devices from known companies like HTC, SAMSUNG, SONY, etc. also encounter this problem when facebook messenger is installed.
- Future updates will be release as soon as this issue is fix permanently.
Reserved
MANUAL OTA UPDATES DOWNLOAD LINK(S)
How to manually flash OTA update(s) via CWM/TWRP
1. Download flasable zip file from given link
2. Save downloaded file in sdcard
3. Boot device in recovery mode
4. Flash directly no need to wipe data or factory reset
Reserved
Screenshots gallery:
When is the download link going to be released?
rishiandri said:
When is the download link going to be released?
Click to expand...
Click to collapse
Download link will be up by today :good:
nrupesh2912 said:
Download link will be up by today :good:
Click to expand...
Click to collapse
Cool.. Waiting for it
Sent from my M2 using XDA Premium 4 mobile app
@nrupesh2912 thanks for the one more great rom..............waiting for download link
slow
nrupesh2912 said:
FAQ(s)
1. How to enable air command?
- Hold capacitive menu button
2. How to use multiwindow?
- Just drag 2 apps from sidebar
3. How to hide / unhide sidebar?
- Just long press the back key button
4. How to install OTA update(s) after downloading?
- Uncheck wipe data and wipe cache before installing OTA update(s).
5. Why do I always experience Unfortunately, SystemUI has stopped?
- If you have facebook messenger installed, drag down chat head(s) to close it then reopen messenger application shortcut to restore System UI back to normal. (Do this if you encounter similar issue with other messenger applications like Viber, Yahoo!, Skype, etc...)
- Another workaround is to install Xposed Installer/Framework and Gravity Box [JB]. Activate Gravity Box [JB] module in Xposed Installer then reboot. Open Gravity Box select Navigation keys actions and set Home key Long-press action to Show recent apps.
- Branded Android devices from known companies like HTC, SAMSUNG, SONY, etc. also encounter this problem when facebook messenger is installed.
- Future updates will be release as soon as this issue is fix permanently.
Click to expand...
Click to collapse
dont u think its slow
Review to 1 day of usage
Hey, thanks for another great rom. Here is the review :
1. The rom is a bit laggy. Lags appear every now and then which becomes a bit irritating.
2. The air command window can be opened but it freezes there itself if attempted to close and the device then needs to be restarted to solve the issue.
3. Multiple sound engines always cause some issues. So i suggest to keep only Viper in the rom. Viper works flawlessly.
4. The S note and sketchbook apps are very much slow.
More detailed review coming soon
P.S Thanks again
anything u can ask said:
dont u think its slow
Click to expand...
Click to collapse
No its not slow.....yesterday late night i downloaded and flashed...and what i observe are below.....
Its is smooth like stock
works well...both sim's, network etc
All samsung goodies and lot more...
What is not good...
When i open camera and take picture camera closed...but picture is taken i tried for both front and back camera and this issue happened.
When i clicked on Font in setting system UI crashed
It seems some more work is required towards this rom to be a great rom
overall good work by devs and thanks @nrupesh2912 for porting this great rom for our turbo
Smart features not working
Features in this ROM like smart stay,smart scroll and air gestures are not working
air command does comes up but I am not able to use any of its function
only smart pause in the video player works accurately
I wish you to file update .zip for following features to work especial smart scroll by tilting head
hoping a good reply from xda team
In call screen is distorted
Is any body facing distorted call receiving screen with this ROM? What is the fix?
karbonn titanium x
anything u can ask said:
dont u think its slow
Click to expand...
Click to collapse
Hi sir i am using "Karbonn Titanium x" mobile.....
i have sucessfully flashed your rom by port with my stock rom....
but the problem is with resolution...
the icons and apps are very small in my mobile...how to increase the resolution are resize the apps....?
please help me there is no manifacters for this rom so i tried to port rom....
please solve my problem
updates?
to the creator of this rom, sir any updates regarding to your rom?
karbonn titanium x
Ranzoe said:
to the creator of this rom, sir any updates regarding to your rom?
Click to expand...
Click to collapse
yse I change the value of "ro.sf.lcd_density" in "buld" folder...
updates
uinod3 said:
yse I change the value of "ro.sf.lcd_density" in "buld" folder...
Click to expand...
Click to collapse
Sir if its not too much to ask can you fix the fluidity of the rom its a bit slow, thank you
Camera Fix
i just found a bug about using the camera it crash when you take a picture
nrupesh2912 said:
MANUAL OTA UPDATES DOWNLOAD LINK(S)
How to manually flash OTA update(s) via CWM/TWRP
1. Download flasable zip file from given link
2. Save downloaded file in sdcard
3. Boot device in recovery mode
4. Flash directly no need to wipe data or factory reset
Click to expand...
Click to collapse
Buddy y this happens...?
First of all i want to make sure one thing to all the developers and users in this forum. I am not the developer of this rom. I am just sharing the work of a Great Developer. So i request everyone not to use any feature of this rom in yours. If you want to, then please ask proper permissions from the actual developer and give proper credits. Please must follow this
CAUTION: I will not be responsible for anything that will happen to your device while flashing or using this rom. Not even the developers too. You are solely responsible for everything that will happen to your device while using this ROM. Mind that Dudes
READ THIS FIRST
1. I am sharing this work here from some other forum with the permission of the developer.
2. So please don't ask for ETA's of updates.
3. If any one facing any new bug, please report here, but don't ask questions like "when it will be solved"?
4. It will be notified to the developer and it will be resolved off gradually.:good::good:
5. Don't use Harsh Language while posting in the comment sections.
Prerequisites:
1. You Must have the Stock Kitkat 4.4.2 in your phone before flashing this.
2. You must have the CWM recovery/Philz Recovery installed in your phone (Highly Recommended)
ROM FEATURES
1. Multiwindow
2. UPSM Mode
3. Private Mode
4. Toolbox
5. Statusbar Settings
6. Advanced Power-Off Settings
7. Animation Settings
8. Dynamic Statusbar
9. One Handed Operation
10. Circle Sidebar
11. Gesture Anywhere
12. Guest Mode
13. USB Fast Charge Support
14. Themes Support and So On........
Installation Instructions
1. First download the Firmware Package from below links.
For GT I9192 Users: https://yadi.sk/d/FwwmUW6knq3rS
For GT I9190 Users: https://yadi.sk/d/8M2V0av6npiug
For GT I9195 Users: https://yadi.sk/d/cl2m5Ujtnpisi
2. Flash the above firmware through ODIN. Complete the setup
3. Then download the following ROM file...
MOD EDIT
Links removed for containing warez
4. Download the rom from above link. Put it in your sdcard and flash via recovery.
5. The GT I9190 users can flash the rom and reboot the phone. No fixes are needed.
6. For GT I9192 and GT I9195 users, download the following corresponding fixes and place it in sdcard along with the Rom file. Flash the fix immediately after flashing the rom and then reboot. otherwise you may results in bootlop.
For GT I9192 Users: https://yadi.sk/d/QGSI0M8ioXyxe
For GT I9195 Users: https://yadi.sk/d/9P-gP3MPoXyzL
7. That's it..!!!!!
Post installation instructions
1. After flashing the ROM and fixes. No setup screen will come and dont get panic.
2. Also the phone language will be in Russian or serbian i think. Don't panic for that too.
3. Just go to settings (language is not needed for to select settings lol) and look for the language and input option...you can easily find it out. Or other wise check the screenshots. And in that you can see the option for language change. Change it to whichever language you want and phone will gets rebooted. Then you can enjoy all the features of the ROM..
4. Attached the screenshots in post #2.
Updates
Update 5.2.2
[/COLOR]
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT][/SIZE]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
To change Language
To change the language after setup see the following screenshots...
CWM Recovery for Duos Users
Flash Via Odin
More Screenshots
there is a problem in power menu doesn't appear
Mo7amed_Gom3a said:
there is a problem in power menu doesn't appear
Click to expand...
Click to collapse
Activate the developer option, go to that and in the last you will see an option called "advanced system settings".
In that, you will see an option with the name "Power off button setting". There you will have all the options for the power menu..
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Viruses and adds?!?!?!?!
I don't understand.....
You talking about the stagefright bug?!?!?!
Sent 4m My S4 Mini Duos with S5 "STE" Rom by PLOIKI
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Also what you mean by, "Once you installed you can't uninstall the adds and viruses?" LOL....Its funny....
Because for the past 2 weeks i am using this rom and before that also i used this and i changed to CM 13 and some other MM ports for short time. No problems arised while changing....
Now due to some reasons, i revert back to this.... And moreover some of the users here personally contacted me to give the links of this rom. That's why i created this thread....
And one more thing i am not making any fun of you. But i want you to make clear about the "Viruses and Adds" thing??!!!!!
Was really looking forward to trying it out, what viruses :crying:
Init.d will force close
Hi
If u get Init.d will force close use this kernel Alexax66 0.1.2 for I9192
Hello there. my phone never had kitkat officially so i am using s6&N5 port(which is 4.4).
do i still have to download I9190XXUCOC1_SER.zip? or can i directly flash S5_STE_Rom_v.5.2.1.zip.
because i heard kitkat update bootloader and i do not want my bootloader to be updated as i may want to go for jelly bean.
btw i updated s6 port(kitkat) from NEW S6 n N5 Project thread from jellybean. and worked fine.
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
syednawaz said:
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
Click to expand...
Click to collapse
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
little bit more help please. How to do it? which file to delete? and total commander for pc right?
syednawaz said:
little bit more help please. How to do it? which file to delete? and total commander for pc right?
Click to expand...
Click to collapse
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
syednawaz said:
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
Click to expand...
Click to collapse
Yes i have tried that. U can also try. Just remove all the files except system.img and boot.img then flash then you will have the kitkat firmware installed then u need to flash this rom
Sent from my ASUS_T00J using XDA Free mobile app
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
solved. by removing md5. now installing
syednawaz said:
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
Click to expand...
Click to collapse
Remove .md5 the firmware should be in xxx.tar not xxx.tar.md5
Sent from my ASUS_T00J using XDA Free mobile app
Code:
/*
* Your warranty is now void.
*
* We (The AXES Team) are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, We will laugh at you.
*/
AXES Rom as in: "AlexsaderXxvirusElazarSystem", is a Stock Touchwiz Marshmallow Rom based on the A520FXXU1AQC3 firmware for the Samsung Galaxy A5 2017 Smartphone which is compatible with the following Model Numbers:
A520F (Europe, Global Single-SIM)
A520F/DS (Global Dual-SIM)
A520K/L/S (South Korea)
A520W (Canada)
FEATURES:
1- February 2017 Security Patch
2- Pre-rooted
3- Xposed Framework Pre-installed
4- XTouchWiz Xposed Module Pre-installed
5- Busybox Pre-installed
6- Samsung's Good Lock UI applied
7- Galaxy S8 Touchwiz Launcher set as the default launcher
8- Nova Launcher available as well
9- Multiple User Accounts (Main, Guest)
10- Advanced Reboot Menu
11- Pop-up View Gestures
12- Samsung Galaxy Note 7 Apps Edge
13- build.prop Tweaks
14- Viper4Android v2.3.4.0 (Make sure to use the: "Compatible Mode" option in the Viper app since we've inserted another sound mod)
For more info you can check out VIPER'S Audio Website here:
http://vipersaudio.com/blog/?page_id=127
And the Official Xda Thread here:
https://forum.xda-developers.com/showthread.php?t=2191223
15- eXtremeBeats Aural Maximizer 2™ Audio Mod
For more info you can check out the Official Xda Thread of eXtremeBeats here:
https://forum.xda-developers.com/showthread.php?t=2634729
16- S Health Available & Working
17- Knox removed
18- Comes in a 1.4 GB of Size Package
CREDITS:
@alexsaderxda ---> He's Rom as base for AXES Rom and he's help in the Development Area
@XxViRUsPRO ---> Lead Developer/Main Developer
@LorDElazAR ---> Ideas for the Rom and the Creator of this Thread along with it's Text
SPECIAL THANKS:
@samsung for their Firmware & Good Lock UI
@SuperR. for he's Linux Kitchen
@JustArchi for he's ArchiKitchen
@rovo89 for Xposed
@wanam for he's XTouchWiz Xposed Module
@Chainfire for Superuser
@viper520 for Viper4Android
@Ben Feutrill for he's eXtremeBeats Audio Mod
VERSION INFO:
Status: Stable
Current Stable Version: AXES Rom v1
Stable Release Date: Sat, May 13 2017
Hello A5 2017 Users,
Thank you for taking a look at what modified software (Rom) we have to offer for your device. In return we welcome you into considering joining our Galaxy A5 2017 Whatsapp Group.
If your interested, don't hesitate to check out the Original Xda Thread here:
https://forum.xda-developers.com/samsung-a-series-2017/how-to/galaxy-a5-2017-whatsapp-t3561455
Best Regards,
The AXES Team
Don't forget to thank the Lead Developer/Main Developer @XxViRUsPRO in he's post down below for making all of this possible!
Also we'd love to hear from you through your feedbacks and ratings as it is much appreciated and it's what keeps us going into providing new updates and a better overall experience. So be honest above all else.
DOWNLOAD LINK:
https://mega.nz/#!4phlVZyT!oJDhCQyDqldlRSnALTF2itmZ_8p4eUZ_-7wudTUZLI4
Screenshots & Installation Instructions are available in the other posts down below.
Changelog:
[Sat, May 13 2017]: Initial Release
----------------------------
Screenshots:
Requirements for installing AXES Rom:
1- A Human Brain
2- A PC/Laptop running Windows OS
3- Samsung USB-C Cable (USB-C to USB-A) which obviously comes with your phone in it's retail box.
4- Patience & Time at hand
Make sure to backup your files, contacts and so on before attempting to tamper with your device unofficially as the data residing in your phone's storage will be wiped!
Instructions on installing AXES Rom:
1- Go to your devices Settings ---> About device ---> Software info and tap on it's "Build number" several times in a row till a message appears saying that you have unlocked Developers mode.
Go back one step and you'll find a new option defined as: "Developers mode".
Without further ado select Developers mode in Settings and turn on: "OEM unlock".
2- Make sure the above step is fulfilled before you move on to this step. This guide is case sensitive and your device is on the line in case you do not follow the necessary steps provided in the right sequence and way.
Turn Off your phone completely and press and hold it's Power Button along with it's Volume Down Button & Home Button to enter: "Download Mode".
After the Samsung phone name logo, you will see a blue screen with a warning sign.
Proceed by simply pressing the Volume Up button once as seen on the screen.
Now you are in the: "Download Mode" aka: "Odin Mode" for flashing firmware files using the Samsung flashing tool called Odin.
3- In this step we will be attempting to Flash a Custom Recovery entitled: "TWRP" which stands for: "Team Win Recovery Project".
To do so we will need to download the Odin Windows Application as described above in Step 2 for flashing the custom recovery file.
WARNING: Flashing a custom recovery to your device will trip the Knox warranty bit on your phone. Check with your mobile provider to see if they will still cover warranty on Knox bit triggered devices. If you understand this risk, continue on.
Odin v3.12.3 Download Link:
https://forum.xda-developers.com/showthread.php?t=2711451
You'll find the link in the attachments section below the thread.
TWRP Recovery v3.0.2.0 (ONLY for SM-A520F/DS) Download Link:
https://www.androidfilehost.com/?fid=745425885120710156
Once you've download both files from the given links above, extract the folder: "Odin3 v3.12.3" from the Odin3 v3.12.3.zip file to your desktop and move the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file to the Odin folder you just extracted.
Run the Odin3 Application within that folder.
Click on the: "Options" Tab after Log and uncheck: "Auto Reboot" and make sure that: "F. Reset Time" is checked.
Go back to the: "Log" Tab and click on the: "AP" button and select the: "A5-SM-A520F-TWRP-3.0.2.0.tar" file you just moved to the Odin folder in your desktop.
In order for Odin to detect that your phone's connected to your PC/Laptop make sure you have the Samsung Usb Driver for Mobile Phones installed onto your PC/Laptop.
If you already have it installed then simply skip obtaining it from the download link below.
Samsung Usb Driver for Mobile Phones Download Link:
https://yadi.sk/d/uubiaKw6j8bug
Afterwards connect your phone to your PC/Laptop using the Samsung USB-C Cable.
Once Odin displays that your device is connected, hit the: "Start" button below and wait for the file to be done flashing. You will notice above a green progress bar filling up towards the end and also your phone's screen will display a white progress bar to go along with it.
4- Odin will display a green: "Done" box above when it's done flashing TWRP Recovery.
Afterwards we will reboot our phone normally by simply pressing and holding the Volume Up Button and Power Button for a few seconds (around 10 sec.) and then we instantly press and hold the Volume Up Button along with the Power Button and Home Button before we see the Samsung Galaxy A5 Bootlogo in order to successfully boot to TWRP Recovery.
5- You will reach a TWRP Recovery screen asking you if you want to allow system modifications. Swipe right and enable modifications and select: "Don't show this again".
6- For the Internal Storage or Data to work in TWRP Recovery we will have to go to: "Wipe" then "Format Data" (not advanced wipe) and type: "yes".
Go to: "Reboot" and select: "Recovery".
7- Your phone will reboot to TWRP Recovery once again.
If you have the Rom zip file available in your External SD Card then skip Part 1 of this step and move on to Part 2.
Part 1: While running TWRP Recovery on your device, connect your phone to your PC/Laptop using the usb cable and copy the Rom zip file to your phone's Internal Storage.
Part 2: Finally go to: "Install", select storage and select: "Internal" or "External storage" wherever you copied and stored the AXES Rom zip file.
Locate the Rom in either storages, select it and swipe to the right to flash it.
Wait for the Rom to be flashed entirely and then select the reboot option.
Rebooting to the system will require about 5 minutes so be patient and don't forget to report back to us with your experience!
Does this rom flash thru odin or???
No You Can Flash It Only Via Custom Recovery Like TWRP and CWM
in testing.
thanks for the rom.
Is it safe to flash this rom to a SM-A520F??? not duos
Kargi said:
Is it safe to flash this rom to a SM-A520F??? not duos
Click to expand...
Click to collapse
This ROM Is For SM-A520F/DS
LorDElazAR said:
Screenshots:
Click to expand...
Click to collapse
Whats up with this UI?
argoitiaangeel said:
Whats up with this UI?
Click to expand...
Click to collapse
This Is Samsung Good Lock UI and This Can Be Modified By User So He Can Change Colors,Clock And Lock Screen Effects
Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM
NO OS INSTALLED .. after flashing through TWRP ..
XxViRUsPRO said:
Guys Any One Need Help Or Have Any Question PM Private Or PM On WhatsApp (+96176406231) And Dont Forget Give Me And LorDEazAR Thanks If You Like This ROM
Click to expand...
Click to collapse
can u make a video how to flash this rom successfully. tnk u /
Nougat Comming.... All Test :good:
For Now! For More Helping [Press Thanks Buttom & Go Try My ROM]
xAce4 said:
can u make a video how to flash this rom successfully. tnk u /
Click to expand...
Click to collapse
Hello xAce4!
Make sure to follow the Instructions in the posts above you for Installing the Rom successfully.
Samsung theme work on this rom?
mcvisster said:
Samsung theme work on this rom?
Click to expand...
Click to collapse
Yes it's available.
reserved
IMPORTANT ADVISE! I AM NOT THE MAINTAINEER OF THE EPIC ROM OF MI6 YET, NOW IS JOSEMA93, I AM RETIRED BY NOW (BUT WE'LL SEE YOU AGAIN IN AOSP SOON)
Jamflux, Pocarropa, and MrRaines (MrTomatico on en.miui), creators of Épic ROM, we are glad to present Épic ROM for Xiaomi Mi MIX, who was born thanks to the hard work of these guys. Epic ROM is a Custom ROM based on MIUI, but with some mods and improvements that you can see below on features chapter.
The focus of this ROM is improve MIUI official stock on many devices making many mods and improve Xiaomi sellers to get a bigger MIUI-ers family!
**IMPORTANT ADVISE : Install at your own risk on your device. We are not responsible of any damage on your device. Read carefully instructions before install.
Requirements:
-Xiaomi Mi 6
-Unlocked Bootloader (official unlock to prevent issues)
-Custom Recovery (Cofface TWRP Recovery is highly recommended)
-Make previously a full Backup by TWRP Recovery (System, Data, Cache, and EFS).
-Read all thread before proceed
-Love for technology and most important: Love for Xiaomi!
Newest Features
Changelog:
* 9.0.5.0 v1.5 base with all changes (visit en.miui.com/forum to check all)
* Assisted GPS in Settings
* New Camera Interface
* Camera2Api and HAL3 Enabled by default
* New Miui Mail enabled
* Face Unlock
* Blur lock screen effect
* New Epic Themes
* New TWRP 3.2.0.0 base with Epic Theme by MrRaines
* All features from Epic ROM 7.11.30
* Improved Themes Manager and Welcome Message
* New PowerMenu Design
* Notification shade improved (not aosp by now but is better than older)
* Soon I'll add smart assistant and more...
The rest of features are in quote below:
HTML:
* Fixed Notifications and FACE UNLOCK
* BugFixes in the system adn gallery
* Fixed widgets issues
* New boot mechanism
* New settings for Smart Assistant (next week I will add many other features like enable and disable it, etc)
* Fixed many bugs with languages from GitHub like Italian or German
* Fixed a little issue when displaying WiFi in some networks
* Fixed notifications mechanism
* Introduced SMART ASSISTANT Global
* Added few new languages
* Many bug fixes in system
* UI Simplified
* New Epic Music Widgets
* DELETED antispam by default by people asking (now you can flash it by addons in OTA)
* New Audio Modes for Mi 6 and MiMIX
* New GRID for Launcher and Folders (Thanks to Tomhenson and MrRaines)
* New GRID selector in Settings/home and recents (Thanks to Tomhenson and MrRaines)
* New Ringtones and Notifications sounds
* New mods for Icons, Grid, Reflected Icons, and more in OTA and ADDONS
* All changelog from official build in en.miui.com
* Safety net and android pay only works without ROOT (Payments will work as HCE protocol)
* New Network manager and bugfixes in system
-SuperSU in ota and mods, if you want it.
-Improved System Speed
-MultiWindow
-Fixed Wifi from 3.0
-Updated all languages from GitHub
-Deleted Adaway (anti spam now is native in MIUI system by MrRaines)
-Deleted root
-DocumentsUI enabled ALWAYS by default
-Fixed SafetyNet and NFC Payments!
Xiaomi.eu base (thanks to this, I don't have to deodex all rom, that takes me about 1 hour in my old computer... Blur-lockscreen effect is added also in epic rom (services.jar) and all languages from eu base; THANKS to Ingbrzy for his amazing work!)
DOZE enabled!!
New apps added to OTA and MODs (in settings)
Improved icons on status bar mods and improved the rest of the mods
LockScreen Icon in Status Bar MOD now is White
Optimizations on TWRP installation and GAPPS
Better Intelligent CPU management and RAM
DPI Changer in Ota and MODs (settings app)
Multilanguage
Zipalign all ROM
New Nice Icons in settings and launcher
New (a lot of) mods in OTA & MODS on settings
Gapps Pico pre-installed (Google Play Store and Google Services... you can choose what Google app's are you going to install later :P)
Épic OTA Service Added on Settings
Epic Mods on OTA app
Music App Improved
Icons on Settings re-orderer (now you'll have Dolby and SuperSU, and dolby icon from launcher has been removed, you can hide supersu icon from supersu app and only have supersu icon in settings)
Init.d support
Busybox pre-installed
Kernel tweaks (very little changes on boot.img)
Build.prop improved (again)
Miui System improved to get better RAM management
Services and frameworks improvements (more battery and system performance)
MIUI Launcher improvements
Camera MODs (better image quality)
Adway integrated on system (you can see also on Settings)
All Chinese app's and Google app's (bloatware) removed
Advanced Reboot Menú (PowerMenu improved)
DolbyAtmos Updated to latest version
Some Nice Wallpapers added
More Languajes and Spanish Updated (thanks to [user=5863451]@JamFlux[/user])
Assistant Touch Updated Like Epic Team Style :P
Animations on SystemUI (lockscreen), thanks to xiaomi.eu but we now add some optimizations to this
Epic Bootanimation improved
Optimized installation time from TWRP.
Fixed issues in NFC pay (you should unroot your device from SuperSU app)
Added XIAOMI installer multilang (with antivirus :P )
Better Battery and Performance/RAM management thanks also to many patches that we built for JBart
Languages Supported:
All European Languages from Xiaomi.eu (Thanks Ingbrzy, for bring to all MIUI users xiaomi eu roms (availables in www.xiaomi.eu) )
How to install first time
* First of all, make a complete backup of all your photos and internal data in the computer, since the first installation requires to eliminate ALL the sdcard content, given the encryption of Android Nougat and later; the one that warns you is not a traitor, you are going to lose all the data (just as it happens if you install other ROMS). This is due to (in turn) that if we have not formatted the sdcard, it will not boot for security protection data of the cited encryption,
* With TWRP Recovery (read tutorials on how to install it) we will make another backup, but this time System, Data, Cache, Boot, and especially the EFS (important).
* Download the ZIP flasheable and pass it to the internal memory of the phone (no matter if we have already formatted it or not).
* Restart on TWRP recovery
* Make Wipes: System, Data, Dalvik, Cache.
* Install from Recovery the EpicROM ZIP flasheable and wait for it to appear okay (If you get error 7 the TWRP in the step of "formating system / extracting system", restart in recovery immediately, and reinstall it, this is due that in Nougat you must re-generate the system partition for encryption topics, so it will install you, it should work like the rest of us )
* We reboot in fastboot mode once the rom has been installed correctly. To do this, we can do it from TWRP in REBOOT / Fastboot or by holding down the power button and the volume down button until FASTBOOT and Mitu appear by soldering an Android robot. In this step, we connect the mobile to the computer, and in the same folder that can be downloaded from en.miui.com/unlock (to unblock the bootloader) click inside that folder in a blank space in the right mouse click while holding the SHIFT key on the keyboard; a window will appear and the "open command window" option should appear. We tapped on that window. When it opens, if you open powershell (blue screen) from windows 10, type cmd and press enter. If you open the classic cmd of all life (BLACK SCREEN) we are already where we want.
* Type in the cmd (be powershell or cmd) fastboot format userdata and press enter. There will be formatted all our mobile, and restarting it will work everything.
* Restart normally and configure. Remember that the first start takes a little longer, from there, it will always light fast. In the following versions, it will NOT BE MISSING to do all this, just install without wipes and to run. I already adapt it so that I clean what I have to clean with each update EXCEPT that I expressly say something else in that UPDATE.
* Enjoy (and re-pass all data previously backed up to the internal memory).
How to install UPDATE from Epic ROM 7.X.XX
Download Epic OTA with OTA app from Settings (No MIUI Updater, use EPIC OTA!)
You can also download update manually from en.miui forum or htcmania spanish forum
Install update from Epic OTA or from TWRP Recovery manually
You don't need to wipe anything if we don't say it on update! If you have to do some special, we will let you know
Reboot
Enjoy
Download Center
9.0.5.0_1.5 for Xiaomi MI 6 (Sagit) Nougat 7.1.1
Download: https://www.androidfilehost.com/?fid=745849072291693954
Note: Please remember: Installation could take about 5 minutes in the TWRP Recovery, BE PATIENT and don't touch anything!
Current Status: Tested 100%; ROM Stable and TWRP by Cofface works in all MIUI roms!!
Note: If you want to use Google Assistant please set as default assistant Google Aplication in settings/installed aplications/default/assistant and enable Google in home button in settings/aditional settings/buttons.
Obviously, you need to install Google App .
If you like my work please consider to make me a little donation in this paypal link
Thanks to:
Xiaomi (and Xiaomi official developers for bring to us this amazing SO)
Google
Xiaomi Eu Team
MultiROM Team
Epic Team founder Members @JamFlux, @pocaropa, @MrRaines (MrTomatico on en.miui))
All MIUI DEVICE TEAM
All Admins/Mods/SMods from En.MIUI for all support
HTCManía (Spanish Forum)
Official Website: www.epicrom.pro
Enjoy and Remember: Keep loving Xiaomi!
Nice work, I'll definitely look into this once my mi 6 arrives
get for natrium, please
Flashed and seems to work very good.
Thank you!
Can you add features like blurred statusbar option? Like the one on miui7. Since last build miuipro 7.5.25 has implemented this. Thanks for the rom anyway
Got error 7 many times. I cant fix It.
Downloaded 3 times and same
Not booting at all. 30 min and still bootanimation. I have followed the instructions to the letter and nothing changes. Tried it thrice.
A video tutorial would be nice, I might be doing something wrong. Also I'm on official TWRP, IDK if that makes a difference.
riirezende said:
Got error 7 many times. I cant fix It.
Downloaded 3 times and same
Click to expand...
Click to collapse
When you get error 7 try to restart to recovery and flash again. This worked for me with cofface twrp.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
Asce1062 said:
Not booting at all. 30 min and still bootanimation. I have followed the instructions to the letter and nothing changes. Tried it thrice.
A video tutorial would be nice, I might be doing something wrong. Also I'm on official TWRP, IDK if that makes a difference.
Click to expand...
Click to collapse
No problem with cofface twrp
battery is really awful magisk not working always having FC
IronJacob said:
When you get error 7 try to restart to recovery and flash again. This worked for me with cofface twrp.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
No problem with cofface twrp
Click to expand...
Click to collapse
Im using cofface also.
Ill try again thx
Someone tried with Official TWRP? I want Install Official TWRP then This
In 2 days I'll release new update by OTA with bug fixes and new amazing features.
Uploading 7.6.10 with many fixes (even battery drain fix).
MrRaines said:
Uploading 7.6.10 with many fixes (even battery drain fix).
Click to expand...
Click to collapse
is it still uploading? Didn't see the links for old file and 7.6.10 either :/
IronJacob said:
No problem with cofface twrp
Click to expand...
Click to collapse
Actually the recovery does not matter. I used official TWRP recovery and got it to work.
It's juts the flashing guide that misguided (lol) me.
Coming from global/official/beta or any other ROMS you HAVE TO WIPE USER DATA.
Also going back to global/official/beta ROMS you HAVE TO WIPE USER DATA.
Otherwise the guide is okay, if this could be pinned or added together with the other *NOTES it would be superb.
Asce1062 said:
Actually the recovery does not matter. I used official TWRP recovery and got it to work.
It's juts the flashing guide that misguided (lol) me.
Coming from global/official/beta or any other ROMS you HAVE TO WIPE USER DATA.
Also going back to global/official/beta ROMS you HAVE TO WIPE USER DATA.
If otherwise the guide is okay, if this could be pinned or added together with the other *NOTES it would be superb.
Click to expand...
Click to collapse
Then everythink is lost from phone ? I need to download with mtp this rom to internal to flash it, or otg works?
fuxmen said:
Then everythink is lost from phone ? I need to download with mtp this rom to internal to flash it, or otg works?
Click to expand...
Click to collapse
Yes, everything is lost from phone.
Copy internal storage, or important data (in internal) to computer.
I have not tested otg since I don't have a type-c otg nor do I have a converter to type-c.
Sideloading works. (I use this a lot)
Also you could just enable mtp and copy .zip to storage.
Not booting stays at EpicROM logo :/
Trying With officeial TWRP, With Cofface, formated all partitions :/ No error 7 while falshing all process went well.
Hmmm What am I doing wronge here :/
edit
FORMAT DATA in TWRP helped
Why the landscape lock icon persist?
yoghibawono said:
Why the landscape lock icon persist?
Click to expand...
Click to collapse
Because you've installed the full mod of status bar from ota and mods by MrRaines . Install the "come back to normal/stock status bar mod" to revert it hahaha.