Related
Here i will add some spectrum profiles based on various governors which can be flashed after flashing my kernel and i will also open a poll to compare each governor and which is the best
1)profile based on cultivation
2)profile based on bluactive
3)profile based on impulse
4)stock kernel profile for users who want complete smoothness same as stock kernel but smoother
all the profile can be found here
downloads
reserved
Great Initiative !
Sent from my iPhone using Tapatalk Pro
Thanks!
Awesome!
So do we have a general consensus if which profile is the best for battery longevity/screen on time.
Kind regards
@nikhil18 the stock kernel profile is the one that ships with your kernel? (In your thread you say that interactive is tweaked). Is the stock kernel profile for interactive? Ty in advance.
Konskl said:
@nikhil18 the stock kernel profile is the one that ships with your kernel? (In your thread you say that interactive is tweaked). Is the stock kernel profile for interactive? Ty in advance.
Click to expand...
Click to collapse
No the stock kernel profile is same which ships with stock kernel on op5 with no underclcock and if you want it go back to my default kernel profile then you will need to reflash kernel
nikhil18 said:
No the stock kernel profile is same which ships with stock kernel on op5 with no underclcock and if you want it go back to my default kernel profile then you will need to reflash kernel
Click to expand...
Click to collapse
So which one of those do you suggest for smoothest experience while not hurting battery life too much?
@nikhilg18 I've flashed cultivation profile. So next what must I select in spectrum app?
ELoTRIX said:
@nikhilg18 I've flashed cultivation profile. So next what must I select in spectrum app?
Click to expand...
Click to collapse
I don't think so profile will be automatically applied u can check on kernel manager
ELoTRIX said:
@nikhilg18 I've flashed cultivation profile. So next what must I select in spectrum app?
Click to expand...
Click to collapse
The profiles are applied automatically no need to select anything in spectrum
Thank's you !
Just curious if more profiles can potentially be added? Also wondering what the most performance oriented profile would be; I'm assuming blu_active? Thanks in advance!
Thanks for uploading the profile sets. V13 of the kernel had updates to the bluactive. I'm wondering if bluactive profile is compatible with it or does it need to be adjusted for the V13 changes?
keepasa said:
Thanks for uploading the profile sets. V13 of the kernel had updates to the bluactive. I'm wondering if bluactive profile is compatible with it or does it need to be adjusted for the V13 changes?
Click to expand...
Click to collapse
It's compatible
For maximum battery life, which is the best profile?
morfances said:
For maximum battery life, which is the best profile?
Click to expand...
Click to collapse
Try each one of them yourself man.
Beaches everyone has different usage pattern.
I created a blu_active-based profile but set it FOR: battery save , but very fast.
install from twrp
with the app spectrum U must set BALANCE profile.
this profile is battery save , but very fast.
https://drive.google.com/open?id=0Bw0l2qeHF2U2cDlzQ0gzTktzcTQ
gaspolo said:
I created a blu_active-based profile but set it FOR: battery save , but very fast.
install from twrp
with the app spectrum U must set BATTERY SAVE profile.
this profile is battery save , but very fast.
link; https://drive.google.com/open?id=0Bw0l2qeHF2U2OHhNM1dtOEt4cTQ
Click to expand...
Click to collapse
THX,flashing it
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
gaspolo said:
I created a blu_active-based profile but set it FOR: battery save , but very fast.
install from twrp
with the app spectrum U must set BALANCE profile.
this profile is battery save , but very fast.
https://drive.google.com/open?id=0Bw0l2qeHF2U2cDlzQ0gzTktzcTQ
Click to expand...
Click to collapse
Lightning-alucard-profileZIP > ON
spectrum USE "BALANCE profile" >IS very fast but with good battery. MAX CPU is limited 1.5ghz
spectrum USE "BATTERY profile" > is battery FRIENLDY, but 0 LAG!! max cpu limited 1GHZ
BASED ON ALUCARD GOVERNOR
( must install the zip file from twrp)
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this MOD
* before used it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Default thermal config lagging any heavy games(like asphalt 9 pubg etc.)
I changed values and fixed lag.
Thermal Config Select :
Default:Normal Games and Applications cool and medium performance
but Heavy Applications low performance and thermal throttling(Antutu 140-150k)
V1:Normal Games and Applications cool and high performance
but Heavy Applications +5-10 celcius to phone and medium performance(Antutu 155-165k)
V2:Normal Games and Applications cool and high performance
but Heavy Applications +10-15 celcius to phone and high performance(Antutu 160-170k)
Requirements :
Xiaomi Mi5s Plus
LineageOS (installed and rooted)
Floppy Kernel HMP Linaro(installed-recommended)
Root Explorer or Magisk Installed v15.0 and up
Thermal File
Brain
Downloads :
Look Attached Files
Instructions :
Method 1 :
Download the modded conf file to phone storage
Backup your system or conf file
Copy conf file at thermal config directory(use any root explorer)
Change conf file permissions to rw-r-r
Reboot your phone
Thermal Config Directory:
Nougat: "system/etc"
Oreo-Pie:"system/vendor/etc"
Method 2 :
Use Magisk flash module(not tested)
Enjoy
Benchmarks:
Look Attached Thumbnails
Asphalt9 fps meter for gltools used
Pubg fps meter and graphics unlock for gltools used
Thanks for the mod!!?
Is that mod fix los heating issue ?
thewarrior2 said:
Is that mod fix los heating issue ?
Click to expand...
Click to collapse
does not completely solve the heating, but the device does not heat up as much as the heat it generates when it is thermal throttling.
Can we use this on mi 5s(capricorn)?
rhp_engcoy said:
Can we use this on mi 5s(capricorn)?
Click to expand...
Click to collapse
Do not try this file mi5s because thermal sensors diffirent,but i found lineageOS repos capricorn thermal file and i edit for you and share mi5s thread,you try and share benchmarks and game performance:good:
I had this result, why the score of the gpu is 10 000 points less your score? What can i do?
Lorenzopapi99 said:
I had this result, why the score of the gpu is 10 000 points less your score? What can i do?
Click to expand...
Click to collapse
Thanks share your benchmark result.
What do you use rom?kernel?thermal config v1 or v2?
I used now my phone LineageOS16+Floppy Kernel Linaro HMP+Thermal Config V2 and i have 160-170k antutu score with looking thread pictures,and gaming performance perfect.
ByBlaCk said:
Thanks share your benchmark result.
What do you use rom?kernel?thermal config v1 or v2?
I used now my phone LineageOS16+Floppy Kernel Linaro HMP+Thermal Config V2 and i have 160-170k antutu score with looking thread pictures,and gaming performance perfect.
Click to expand...
Click to collapse
I'm using your same configuration, which mode do you use in spectrum app?
Lorenzopapi99 said:
I'm using your same configuration, which mode do you use in spectrum app?
Click to expand...
Click to collapse
Spectrum app?I don't know,you have to explain a little more about this because i did not understand,i used default lineageOS16,added floppy kernel linaro hmp and my v2 thermal config,suggestion to you try this with clean install:good:
ByBlaCk said:
Spectrum app?I don't know,you have to explain a little more about this because i did not understand,i used default lineageOS16,added floppy kernel linaro hmp and my v2 thermal config,suggestion to you try this with clean install:good:
Click to expand...
Click to collapse
Floppy kernel is supported by spectrum, you can download it from play store, and in the app there are 4 different mode.
Lorenzopapi99 said:
Floppy kernel is supported by spectrum, you can download it from play store, and in the app there are 4 different mode.
Click to expand...
Click to collapse
I use balance profile,your problem not spectrum or anything,your problem dirty install and stability,you use clean install try and look performance
ByBlaCk said:
I use balance profile,your problem not spectrum or anything,your problem dirty install and stability,you use clean install try and look performance
Click to expand...
Click to collapse
I have done a clean install
Sir so u use spectrum in balance mode? And can i know what is the performance in pubg? Do u experience some framedrops?
Asapakyou01 said:
Sir so u use spectrum in balance mode? And can i know what is the performance in pubg? Do u experience some framedrops?
Click to expand...
Click to collapse
In balance mode PUBG is ok, there aren't framedrop, and the smartphone doesn't heat so much
Why mine theres always a minor framedrops. Sadly i feel its too unfair.
Asapakyou01 said:
Why mine theres always a minor framedrops. Sadly i feel its too unfair.
Click to expand...
Click to collapse
Update the gpu driver, now in antutu I have done 165k, and also PUBG is much better
I'm installing your mod (v2), but in magisk, your mod still (v1), this is bugs?
yoshidaharu said:
I'm installing your mod (v2), but in magisk, your mod still (v1), this is bugs?
Click to expand...
Click to collapse
sorry,it is my fault,i forget edit module.prop inside rename versiyon,it is v2 but looking magisk v1
Can i use this mod on miui10 8.8.30 developer and stock kernel with root by replace v2 thermal file ?
I basically built this kernel a few weeks ago after @kapmino269 reported on the J4plus that cpu tends to lock at 1094mhz irrespective of load causing lag.
I also confirmed this on the J6 plus. Maybe because of thermal throttling.
Part of this seems to be caused by the rom itself as it does not support a performance mode and only a balanced mode which seems to target the middle of the frequency range and partly the Interactive governor.
Also the stock kernel has a minimum cpu frequency of 960mhz and a max of 1401mhz.
Not good for either battery or performance.
I have been testing the kernel for a few weeks and added and tweaked a new governor called INTELLIACTIVE.
This governor seems to be a good balance of battery/performance.
The governor seems to ramp up/down faster as needed both increasing performance and at the same time saving battery and lowering temps. Temps now in the 30's instead of the 40's when idling.
Touch boosts to max frequency.
The kernel now supports a min frequency of 400mhz and max of 1497mhz with no stability or overheating issues on my device.
Battery seems to have improved as does performance. However even though this kernel does try to mitigate some of the performance issues caused by the stock rom, at certain times the performance will still be at the mercy of the system.
It's here for testing by others, is based on the U1 firmware/kernel, but may work on other firmware.
You will need a kernel app such as EX kernel manager or Kernel Aduitor to modify the parameters.
I suggest setting min to 400mhz for max battery savings and 1497mhz for max performance using the INTELLIACTIVE governor.
The kernel is also root ready (will need patching with Magisk), dmverity disabled, permissive mode enabled, but not enforced, should support OTG.
As ever responsibility is with the user, I take no responsibility if your device goes into nuclear meltdown.
NOTE: At the moment all custom kernels break lockscreen functionality, so ensure no lockscreen is set.
.
(Fix for lockscreen, pattern and pin only, no biometrics) Credit @kapmino269
Install with TWRP:
https://forum.xda-developers.com/attachment.php?attachmentid=4900053&d=1576153217
Flash with TWRP:
https://www.androidfilehost.com/?fid=4349826312261642886
kapmino269 said:
Where is our kernel ?????
Pro ?????
Click to expand...
Click to collapse
Have you seen the response here, not sure it's worth bothering
I tried flashing to boot and to system. Bootlooping. What am I doing wrong? Do I have to convert the file?
Nigel Lewis said:
I tried flashing to boot and to system. Bootlooping. What am I doing wrong? Do I have to convert the file?
Click to expand...
Click to collapse
Which firmware build does your device have? Is your device RMM patched?
yes, its RMM patched. J610G. Its rooted and works fine as per your TWRP thread. Just not getting this new kernel to work.
Nigel Lewis said:
yes, its RMM patched. J610G. Its rooted and works fine as per your TWRP thread. Just not getting this new kernel to work.
Click to expand...
Click to collapse
Which firmware build number is it running?
Yes you are correct. Sorry for the wait.
My build number is J610GUBS3BSH3.
Bro can you please add more overclock frequency for cpu and also add overclock gpu frequency custom kernel for Samsung galaxy j6+ model number SM-J610F android version 8.1.0....
bro Check this custom kernel for j6 it has more overclocked cpu and gpu but its for j6 not j6 plus(j610F). here is the link
https://forum.xda-developers.com/galaxy-j/development/kernel-phoenix-kernel-v3-5-galaxy-j6-t3901087
my device is samsung galaxy j6+ model number SM-j610F android versio 8.1.0
here bro
kapmino269 said:
more oc cpu make lag .... . (bad idea dude )
j6 plus isn't like j6
---------- Post added at 01:40 PM ---------- Previous post was at 01:33 PM ----------
idk about oreo ... if u can use disable limit .
but if u face lag give me result of :
su
cat /sys/power/cpufreq_max_limit
and
su
dmesg |grep freq
Click to expand...
Click to collapse
below are the screen shots bro
flashed
kapmino269 said:
limit is there .....
use disable limit .... , it will remove lag (tested on pie)..
flash this by twrp . https://androidfilehost.com/?fid=4349826312261702503
u should have magisk before .
Test games and tell me , I use one ui pie j4+ ,pubg and call of duty is very fast .
also for j6+ stay in oreo ..... pie won't be good as no fix for fingerprint after root until now .
Click to expand...
Click to collapse
i flashed the script bro and run the commands again and below are the screen shots...can u pls tell if its ok or something wrong ??
kapmino269 said:
no , limit logs will appear but limit won't work .
all is ok , limit was removed , u can test cpu load
https://play.google.com/store/apps/details?id=skynet.cputhrottlingtest
... u will see that frequency won't stay on 1096 ... it will go to max .
if u tested games ???
u should see the difference .
Click to expand...
Click to collapse
not much difference in pubg mobile
kapmino269 said:
for me there is big difference .
Anyway I hope that help u .
notice oc gpu is ok ... but more than 650 .. , it work but phone will reboot suddenly during playing games .
also oc cpu ....is bad idea .
I mean that OC can't increase performance with all phone .
Click to expand...
Click to collapse
ok bro.....thanks for the help.....But can i change the cpu thermal throttling limit to some higher value...so that cpu can remain on highest frequency most of the time while playing games....
Also can u give some gpu tweaks or script which can increase rendering performance...i can play in less quality but more performance
Bro i flashed this custom overclocked kernel but my device is bootlooping ?? its not working in my j610F ?? any solution pls...or any kernel for me ??
help pls
Viper1000 said:
Bro i flashed this custom overclocked kernel but my device is bootlooping ?? its not working in my j610F ?? any solution pls...or any kernel for me ??
Click to expand...
Click to collapse
help pls i need this overclocked kernel pls help devs
pls help dev
Viper1000 said:
help pls i need this overclocked kernel pls help devs
Click to expand...
Click to collapse
pls reply devs
any dev ???
kapmino269 said:
max frequency won't be good .... more frequency == more heat = thermometer detect = force reboot to save soc .
but if u need this u can use performance governor .
for gpu ... no need to scripts .
For best game performance :
- I disabled most of apps which make lag .
- game optimize apps do the opposite with our devices(make more load ) so it is better to disable it also .
- close all apps in recent apps .
- enable don't disturb mode with hide notifications .
- play the game .
Click to expand...
Click to collapse
Can you give detailed information about the installation? When installing from TWRP, it asks where I want to install it. I did all the options but none of them happened.
Jack Coe said:
Can you give detailed information about the installation? When installing from TWRP, it asks where I want to install it. I did all the options but none of them happened.
Click to expand...
Click to collapse
choose recovery option
Viper1000 said:
choose recovery option
Click to expand...
Click to collapse
telefonum j6+
şuradaki romu kullanmaktayım https://forum.xda-developers.com/galaxy-j6+/development/rom-lineageos-17-1-galaxy-j6-t4057947
recovery olarak yüklediğimde telefon bootloop olmuştu kurtarmak zor oldu şuan aktif olarak bu romu kullanıyorum magisk root sorunsuz çalışmakta
(img yi recovery olarak yüklediğimde bootloop oluyor ek olarak ne yapmam gerekmekte bunun düzgünce çalışması için lütfen yardımcı olabilirmisin)
Hello,
I present you a custom kernel from Indonesian's dev Rama982
It's a beta but work fine for daily use
work on all region ( EEA,RU,Global, etc ...)
tested on EEA device
thx to azek1l from 4pda
Genom R kernel project
Genom Kernel For Rosemary | Android 11
Updated: 01/10/'21 (GMT+7)
◾️Genom R || Rosemary
Changelogs:
• Boost UX / Smoother UI
• Upstream to Linux Stable 4.14.248
• Upstream LZ4 to v1.8.3
• Add GPU freq info for FKM
• Add support for TTL fixation
• f2fs: Force strict fsync mode
• Include Magisk v23.0
This boot image is already patched with magisk v23
Download here https://sourceforge.net/projects/genom-kernel/
Requirement:
Unlocked device with MIUI 12.5 and above
Howto install:
Reboot on fastboot
flash the famous empty vbmeta
fastboot --disable-verity --disable-verify flash vbmeta vbmeta.img
Click to expand...
Click to collapse
flash downloaded boot image
fastboot flash boot Genom-R-rosemary-BETA-2021xxxx-xxxx.img
Click to expand...
Click to collapse
and then
fastboot reboot
Click to expand...
Click to collapse
enjoy
Great
Ajayboglea said:
Good to see custom kernel but waiting for custom recovery eagerly.
Click to expand...
Click to collapse
Wait for recovery.. Its the main issue
Ajayboglea said:
But hope is only thing we can do
Click to expand...
Click to collapse
Genom kernel test antutu 318326, stock kernel 328545 ...
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
murigny64 said:
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
Click to expand...
Click to collapse
Eagerly awaiting for stable release
murigny64 said:
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
Click to expand...
Click to collapse
Ok, Good luck developing the kernel
it's not mine, i just share
you can believe on it (on not)
Looking forward to the mature development of the kernel for this amazing SOC
My most important features for the powerful but hot g95 soc:
1. Temperature based sensible pre-throttling without dropping too low for low fps
2. Undervolting to determine what frequencies are stable for individual g95 SOCs and bins
3. Deep Sleep improvements with shorter delay and wakelock disabling
4. Taming the wild fluctuations in performance based on temperature with optimised kernel tweaking profile support using kernel tuning apps depending on the user's ambient temperature and graphics or cpu intensive workloads/ games
5. Last and most important - Battery Idle mode for bypassing the battery altogether unless absolutely necessary
You can send your request on rama982 github:
GitHub - rama982/kernel_xiaomi_rosemary: Custom kernel for Redmi Note 10S | Rosemary | Helio G95
Custom kernel for Redmi Note 10S | Rosemary | Helio G95 - GitHub - rama982/kernel_xiaomi_rosemary: Custom kernel for Redmi Note 10S | Rosemary | Helio G95
github.com
is it possible to remove video over sharpening with custom kernel
marcell39 said:
is it possible to remove video over sharpening with custom kernel
Click to expand...
Click to collapse
that's vendor related
Yes. Even without custom kernel.
[MIRAVISION] Steps to tweak or disable Mediatek MiraVision Hardware Video Decoder Over-processing™
Mediatek Miravision Hardware Video Decoding is found on several Mediatek Chipsets and vendors like Xiaomi design devices for users worldwide that neither allow nor show the settings to configure their media experience to their preference or...
forum.xda-developers.com
marcell39 said:
is it possible to remove video over sharpening with custom kernel
Click to expand...
Click to collapse
I'd just like to say thanks for this thread, without it I'd never have found the updated version of this Kernel! Genshin is running super nice on my phone now on the balance preset of gamebooster! (previously it would throttle hard and cause lots of stuttering, I played for about 50 minutes now without stuttering) I did not expect the stability difference between this and stock to be so huge!
edit: I also used this to root my phone since I was too lazy to make my own boot.img since magisk was already included in this
Checked the link and saw a monthly release till march 2022 since nov 21.
Can a changelog for each release be posted on this thread?
kenshinta said:
Checked the link and saw a monthly release till march 2022 since nov 21.
Can a changelog for each release be posted on this thread?
Click to expand...
Click to collapse
I doubt it since the creator of the Kernel is not the one that made this thread. I'm not sure about the changelog myself. I just used the latest one which is march 2022
edit: btw I love Rurouni kenshin
Cryptonite26 said:
/snip/
edit: btw I love Rurouni kenshin
Click to expand...
Click to collapse
I approve your taste!
Back to topic:
since I rooted, wanted to tweak kernel settings with smartpack kernel tweaker and noticed there is no "low memory killer" section.
Is this miui thing?
And would Genom have it back?
kenshinta said:
I approve your taste!
Back to topic:
since I rooted, wanted to tweak kernel settings with smartpack kernel tweaker and noticed there is no "low memory killer" section.
Is this miui thing?
And would Genom have it back?
Click to expand...
Click to collapse
I don't believe so, you could always use Smartpack to backup your current Kernel before trying out genom and just switch back if it doesn't yield better results when it comes to memory management, battery etc. I personally am not switching back to stock though, my battery is good, UI feels smoother and gaming is better with less overheating issues for me
this could all be moot though since MIUI 13 is confirmed to be ready for our device and is going to rollout very soon.
Where can I get a proper blank VBmeta?
As I never do anything related to vbmeta yet
I kinda confused with it
Does this file device based or cross device?
Edit: I found it
Based on a217f
Version 2 is here
physwizz a21s kernel version 1.5
Based on a217f Version 2 is here https://forum.xda-developers.com/t/physwizz-a21s-kernel-version-1-5.4359957/page-3#post-86991813 For OneUI 3.1 v1.5 (May also work for GSIs) Samsung securities disabled More CPU governors Conservative...
forum.xda-developers.com
For OneUI 3.1 v1.5
(May also work for GSIs)
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
lz4 compression added to zram
Preparation
Install adb tools on pc
allow from unknown sources on phone developer settings
Installation
Connect phone to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload **.zip
reboot
Go to settings, about phone, software information
For Zram
Go to HKtweaks- virtual memory
Turn off zram
increase swappiness to 200
choose lz4
increase size to 4096
turn on Zram
Magisk modules in post #2
Kernel source code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz
I also have 2 Magisk modules to go with my kernel.
physwizz debloat module v2
(Added a70 changes)
With physwizz-2 app
Magisk module to debloat any Samsung phone to remove all the apps that slow down the phone
To debloat:
Install the module from Magisk and reboot.
To rebloat:
delete the module in Magisk and reboot
wizzROM Creator module v2
for all Samsung a-series phones
Turn any stock or custom OneUI into a QwizzROM or RwizzROM
OneUI 2.0 will become QwizzROM
OneUI 3.1 will become RwizzROM
Debloated ROM with Extras
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2
Make sure your OneUI ROM iis running befote you start
Installation
1 Backup system from recovery
2 Install the creator from Magisk
3 Reboot
4 Enjoy
Name your wizzROM (optional)
1. Use a root explorer to copy and paste system/build.prop to new location
2. Edit build.prop like this
ro.build.display.id=<your-name>
3. Use zarchiver to paste the new build.prop into the system folder inside wizzROM-creator.zip
4. Install wizzROM-creator.zip
@physwizz
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp
NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
Check the new instructions
what recovery do we need
physwizz said:
Check the new instructions
Click to expand...
Click to collapse
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo
NuzzaimStark said:
what recovery do we need
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo
Click to expand...
Click to collapse
When I work out how to do the GPU in my a127f I'll also do it on you a21s.
A21s (New)
A21s (SM-A217F/M) discussion and development
t.me
works for sm-a217m
Ganzl 29482 said:
works for sm-a217m
Click to expand...
Click to collapse
Yes?
physwizz said:
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp
Click to expand...
Click to collapse
what version of twrp are you using with the a21f? and where do i get it? and it works fine?
[email protected] said:
what version of twrp are you using with the a21f? and where do i get it? and it works fine?
Click to expand...
Click to collapse
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1
physwizz said:
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1
Click to expand...
Click to collapse
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f
[email protected] said:
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f
Click to expand...
Click to collapse
Yes,
It's now working for a217f
physwizz said:
Yes?
Click to expand...
Click to collapse
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you
AvanGLiT said:
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you
Click to expand...
Click to collapse
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below
physwizz said:
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below
Click to expand...
Click to collapse
Thank you, I tried that but unfortunately did not work, the cpu always drops keeping at 1.58Ghz or 1.84Ghz.
But I found that changing some values from config_chipset.json and config_vendor.json files at "/vendor/etc" to 100%, it keeps the CPU stable at 2,21Ghz as well the GPU.
This file schedules performance for some apps and 'occasions', like if I scroll down photos from Galery the CPU drops to 1.4Ghz, and if I close, the CPU goes back to 1.58Ghz. So that was the problem. Changing some values to 100% fixed that, now I'm able to control the clock normally.
tell me how do you change which app?
NuzzaimStark said:
tell me how do you change which app?
Click to expand...
Click to collapse
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.
AvanGLiT said:
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.
Click to expand...
Click to collapse
Can you run a benchmark on geekbench 5?