Database Develop

No OS, adb: Total xfer=0.00x

Hi everyone.
Accidentally wiped the OS, apparently people fixed it using ADB. I'm trying to sideload a rom but adb says "Total xfer 0.00x" and my moto g says ADB Sideload Complete: Failed.
Any ideas how to fix this?
ADDED:
In case if someone wonders how I fixed this:
1) Reboot the phone into bootloader mode.
2) Open a command prompt / terminal (Start -> cmd.exe in Win7) and browse to the folder with the extracted firmware.
3) Connect your phone to your PC.
4) Flash stock firmware.
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot -w

some commands can not load
and no know such device:silly:

How to re-lock XT1925-6 on firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4

With firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4 rooted enable adb and unlock oem boot loader in the system settings,
reboot in fastboot mode and run:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
wen it finish the process DO NOT PRESS ENTER erase fastboot reboot and run this command ONE BY ONE and wait for each one to finish before adding the next one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot oem fb_mode_clear

xjunior said:
I'm trying to re-lock my bootloader, but nothing works
Always get a boot loader not signed error and bad key ,
Did anybody relocked this specific model?
I've tried this method and a few others with different firmware and bat file and individually flashing the commands
Click to expand...
Click to collapse
Just saying if you trying to relock the bootloader to send it into moto you can't. The second you request your unlock key it voids the warranty and flags your device for there repair department.

I've figure out
With firmware ALI_RETAIL_8.0.0_OPS27.104-15-10-4 rooted enable adb and unlock oem boot loader in the system settings,
reboot in fastboot mode and run:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
wen it finish the process DO NOT PRESS ENTER erase fastboot reboot and run this command ONE BY ONE and wait for each one to finish before adding the next one
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash boot boot.img
fastboot oem lock
fastboot oem fb_mode_clear

Will this bring back the video calling option? I have the same device

Guide: howto update stock rom with unlocked bootloader, root, TWRP and keep user data

With unlocked bootloader, and with TWRP and magisk root installed, you currently can't install any of the motorola OTA:s.
Below have been tested on XT1965-3 while on RETEU, PPWS29.98-66 (security updates installed up until 1 january 2019), with TWRP 3.3.0 installed and rooted, to update to latest stock rom PPWS29.98-66-2 (security updates installed up until 1 april 2019), without wiping internal storage and /data (i.e. all files, apps and settings untouched).
I take no responsibility what so ever for using this guide. Below worked for me. Be prepared to lose all your files, hard brick your phone etc.
Get latest official stock firmware, I got it from https://forum.xda-developers.com/showpost.php?p=79653779&postcount=6 , unzip it
Connect your phone to your computer with usb-cable. Put your phone in flash mode (power button+volume down), open your terminal application (below tested on macOS and linux), get root
sudo -s
navigate in terminal to folder where you unzipped the full stock rom
check the below commands visavi the files from your downloaded stock rom (below works for version mentioned above - future updates may contain more or fewer for example sparse files).
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase carrier
fastboot erase ddr
fastboot flash logo logo.bin
fastboot reboot​
Let your phone reboot and pray
After a hopefully successfull boot with everything still intact, then adb fastboot TWRP and from TWRP reinstall your root.
in flash mode once again
fastboot boot twrp-build-version-lake.img​

wedgehog said:
With unlocked bootloader, and with TWRP and magisk root installed, you currently can't install any of the motorola OTA:s.
Below have been tested on XT1965-3 while on RETEU, PPWS29.98-66 (security updates installed up until 1 january 2019), with TWRP 3.3.0 installed and rooted, to update to latest stock rom PPWS29.98-66-2 (security updates installed up until 1 april 2019), without wiping internal storage and /data (i.e. all files, apps and settings untouched).
I take no responsibility what so ever for using this guide. Below worked for me. Be prepared to lose all your files, hard brick your phone etc.
Get latest official stock firmware, I got it from https://forum.xda-developers.com/showpost.php?p=79653779&postcount=6 , unzip it
Connect your phone to your computer with usb-cable. Put your phone in flash mode (power button+volume down), open your terminal application (below tested on macOS and linux), get root
sudo -s
navigate in terminal to folder where you unzipped the full stock rom
check the below commands visavi the files from your downloaded stock rom (below works for version mentioned above - future updates may contain more or fewer for example sparse files).
fastboot getvar max-sparse-size
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase carrier
fastboot erase ddr
fastboot flash logo logo.bin
fastboot reboot​
Let your phone reboot and pray
After a hopefully successfull boot with everything still intact, then adb fastboot TWRP and from TWRP reinstall your root.
in flash mode once again
fastboot boot twrp-build-version-lake.img​
Click to expand...
Click to collapse
with XT1965-3_LAKE_RETEU_9.0_PPW29.98-111_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml at least for me dirty flash failed, rom didn't boot
did a backup of /data/ to external storage from TWRP with internal storage decrypted (had to boot TWRP from fastboot a couple of times before the decrypt password prompt were shown on boot of TWRP)
did also a backup of internal storage over MTP with TWRP to computer.
then flashed again with below commands, WHICH WILL ERASE INTERNAL STORAGE
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase carrier
fastboot erase userdata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot​
Thereafter successfull boot, reboot to flash mode, boot TWRP again, restore internal storage over MTP from TWRP, restore of data from backup to external storage which were made above
all apps and settings back, and on latest moto firmware.

any chance of capturing the delta OTA's to make them twrp-flashable?

Lupask said:
any chance of capturing the delta OTA's to make them twrp-flashable?
Click to expand...
Click to collapse
Would probably be doable as in almost all other devices in general and older motorola devices in particular have had that. I for one do not have the knowledge of how to do that (and not the time available even if I had that knowledge =) )

I can confirm that at least for me, a dirty flash like the one described in post 1 in this thread worked again with the latest OTA/firmware for RETEU - XT1965-3_LAKE_RETEU_9.0_PPWS29.98-111-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC, when written over the second latest (XT1965-3_LAKE_RETEU_9.0_PPW29.98-111_subsidy-DEFAULT_regulatory-DEFAULT_CFC)
I did however have trouble booting the latest twrp twrp-3.3.1-0-v5.1-lake-jlb from fastboot, phone rebooted after it was sent over adb boot instead of booting twrp it went straight back to fastboot. Tried many times with rebooting to phone home screen in between. But adb fastbooting the older twrp-3.3.0-lake worked straight away, and thereafter installing twrp-3.3.1-0-v5.1-lake-jlb with it's zip worked straight away.

I have tried to get the OTA file for my g7plus from a bugreport.
But it is only 100 Mb rather than the more than 1 Gb is see most roms.
Could it actually be an OTA update? Screenshot of the .zip contents attached.

SvenHee said:
I have tried to get the OTA file for my g7plus from a bugreport.
But it is only 100 Mb rather than the more than 1 Gb is see most roms.
Could it actually be an OTA update? Screenshot of the .zip contents attached.
Click to expand...
Click to collapse
Doesn't seem likely, date is 2009

For reference, here is the line where I found this url:
Code:
12-06 14:19:06.869 5831 14719 D OtaApp : UpdaterEngineHelper:applyPayload, applying payload with downloadUrl = https://dlmgr.gtm.svcmot.com/dl/dlws/1/download/*lots-of-stuff*%3D offsetvalue = 9258 fileSize = 107713236

Lupask said:
any chance of capturing the delta OTA's to make them twrp-flashable?
Click to expand...
Click to collapse
It would be no problem to catch them and make them TWRP flashable. But it's strongly not recommended to do that!! Do an OTA-update only if your device is fully on stock! Otherwise the OTA-update will override incorrect blocks of your partitions and this could crash your entire system irreversible.

Guide: restore River to good as new stock, clean bootloader

Edit: i just realized I put this in the wrong area, can a mod help me out
This took me hours to figure out honestly, and I have experience with this stuff. So, I want this to be as easy to find as possible for other folks.
To go back to stock:
1. Hold down Power and Volume till the boot menu shows up.
2. Plug the phone into your PC
3. Get the newest firmware for your phone model. I bought mine at Best Buy, so it was RETUS aka retail US. https://mirrors.lolinet.com/firmware...iver/official/
4. Extract the archive, and enter that folder in your terminal
5. Run the following commands from that folder. I saved these commands in a shell script and ran it but I think you can just paste it
THIS WILL WIPE ANY DATA ON YOUR PHONE AND PUT IT BACK TO FULL FACTORY FIRMWARE WITH LOCKED BOOT LOADER. At least when I ran it, it got my phone 100% no more complaints when it boots about untrusted code. This also restored my OTA ability and I was able to get the Android 10 update without any issues.
fastboot oem lock begin
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system_b system_b.img_sparsechunk.0
fastboot flash system_b system_b.img_sparsechunk.1
fastboot flash system_b system_b.img_sparsechunk.2
fastboot flash vendor vendor.img_sparsechunk.0
fastboot flash vendor vendor.img_sparsechunk.1
fastboot flash vendor vendor.img_sparsechunk.2
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot oem lock
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot oem lock
Click to expand...
Click to collapse

idumych said:
Edit: i just realized I put this in the wrong area, can a mod help me out
Click to expand...
Click to collapse
[Using "Report" button] How to Report issues / Moderators assistance by TonyStark
https://forum.xda-developers.com/showthread.php?t=1718423
Sent from my ali using XDA Labs

Bootloop with Motorola Logo

Well, I'll tell you ... Well, I bought a Moto G5S Plus for that of late 2018, everything worked fine within normal, sometimes when I restarted it, there were some System errors that did not respond to which I did not pay much attention, because then it worked normal ... until the beginning of this year, the memory was a little full, so I inserted a Micro SD to free up some space and move many images that I had there. I turned it off to insert the SD and when I went to turn it on, it did not pass the Motorola Logo. I thought it was on drums or something, I reset it, did various things to it and to this day, it continues like this ...
In the first instance, not knowing much or nothing about the topic, try this:
Unsuccessfully, then I also tried clearing the cache via Fastboot, but also had no solution ...
Then there was the Hard Reset through Fastboot or reinstalling the Rom through AVOID, because I have many documents, especially Notepads with important information, as well as contacts and multimedia material that I need to recover ...
So I decided to keep looking and luckily I found an interesting post in this forum:
https://www.htcmania.com/showthread....1543&styleid=6
This gave me hope again, besides that I am lucky to have a Moto G2, so I tried the steps described in that post ... And I realized that it obviously works, it does not erase the data from the computer ... Then I proceeded to do it with the Moto G5S Plus and some commands did not work, I did a little research and realized that the files of each ROM were totally different, so I found some specific commands for the Moto G5S Plus:
(Downloading this rom: SANDERS_RETAIL_8.1.0_OPS28.65-36-14_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml)
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I also found another version of commands that differs a bit
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
In that case, following the instructions in the aforementioned post,
(https://www.htcmania.com/showthread....1543&styleid=6), I decided to take into account the recommendations and AVOID commands such as:
fastboot flash partition gpt.bin
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
Everything that could erase data, but I also had doubts about these, I don't know what action they perform:
fastboot flash partition gpt.bin
fastboot oem fb_mode_set
fastboot erase DDR
fastboot oem fb_mode_clear
Finally, I decided to just use these commands, but the phone remained the same in the Logo Bootloop:
fastboot devices
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot reboot
It is here, when I ****ing turn to experts like you, since I don't know what else to do and I still have many doubts ... Do you think that data has been deleted with these procedures or is everything still the same? Is there a way to install the TWRP to save data?
Many videos and forums that I have read say that it can also be BATTERY FAILURE, but I very much doubt that it is, in addition to removing the battery from this model, yes I'm not bad I think you have to remove the display and well, many technicians do not know Buy for it ... Also normal charge when I charge it to full and the battery is consumed in the normal percentage, so that's why I don't think ... But I do need that if they are so kind to give me a hand, because I no longer know What else to do, I really sometimes make my head a madhouse with this topic ...
Friends I thank you and I am very aware. Really thank you very much

Help me!! PLEASE!!