Hello, after performing a reset to install a custom rom, my phone is blocked on Android One and Fastboot, I cannot access anything else. Each time I try a DOS command, it says "waiting for device", I tried to flash with MIFLASH without success. The drivers are installed, the bootloader was unlocked (already installed roms). The phone don't charge. What can I do? I saw the testpoint but I am not an expert in DIY ...
John974 said:
Hello, after performing a reset to install a custom rom, my phone is blocked on Android One and Fastboot, I cannot access anything else. Each time I try a DOS command, it says "waiting for device", I tried to flash with MIFLASH without success. The drivers are installed, the bootloader was unlocked (already installed roms). The phone don't charge. What can I do? I saw the testpoint but I am not an expert in DIY ...
Click to expand...
Click to collapse
I faced the same issue after a wrong flash and had to do a test point, enter EDL and reflash using miflash.
https://www.youtube.com/watch?v=n_7RVmW2Rvs
Maybe if you have good luck, you could enter EDL mode with a deep flash cable
LuuchoRocha said:
I faced the same issue after a wrong flash and had to do a test point, enter EDL and reflash using miflash.
https://www.youtube.com/watch?v=n_7RVmW2Rvs
Maybe if you have good luck, you could enter EDL mode with a deep flash cable
Click to expand...
Click to collapse
Thank you, I do the testpoint and it's ok.
John974 said:
Thank you, I do the testpoint and it's ok.
Click to expand...
Click to collapse
I hope you have been able to fix it. Let me know if you haven't being able.
LuuchoRocha said:
I hope you have been able to fix it. Let me know if you haven't being able.
Click to expand...
Click to collapse
Yes I could fix it. Thank you very much.
Related
:crying: I was trying to root the phone with twrp in fastboot mode, but all of a sudden my pc shut down while still in fastboot twrp mode. and now my phone wont turn on. I cant boot into recovery, fastboot, no charge led, please guys help me.
Is it recognized when you plug it to your computer ?
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
it is recognized like qualocom 9008 usb bulk somethink like it, i dont remember, please help me and sorry for late reply I/m litterelly crying right now, please help me
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
My Pc recogonizes it as " Qualcomm HS-USBQDloader 9008 (COM10) "
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
mysa50 said:
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
Click to expand...
Click to collapse
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
vicky 1859 said:
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
Click to expand...
Click to collapse
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
mysa50 said:
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
Click to expand...
Click to collapse
Thank you, will try now, but will take some time to download the rom, will definitely update on the process once i tried it. i really appreciate your reply, hope this works. thanks once again.
a million thanks
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
I would first recommend you to download any Mi 5 Fastboot image from MIUI forums than install it in Fastboot mode (Hold Volume down+ Power button) through ADB or MIflash tool.
Afterwards recharge your phone fully and then proceed to install TWRp and custom ROM (provided you have unlocked bootloader)
vicky 1859 said:
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
Click to expand...
Click to collapse
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Sir Mohd said:
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Click to expand...
Click to collapse
http://en.miui.com/a-234.html
Guys I wanted to install custom roms in my Xiaomi mi 5 , therefore got my bootloader unlocked and installed twrp recovery through adb . After that , I wiped my miui ROM after taking its backup and tried flashing aoscp ROM , which didn't flash . Thereafter , I restored the previous ROM and now whenever I reboot , it gets stuck on the initial startup screen where Mi logo is there .
Kindly suggest on what to do next since this is very worrying issue for me . Regards
Hi everyone,
everything is in the title, yesterday I bricked my Mix when I tried to install a new version via recovery (Mi Pc suite chinese version).
It updated, started working (I entered the rom) then restarted because it asked for a reset, had to say yes, when it restarted I was in a bootloop of Xiaomi logo and couldn't go into recovery mode anymore.
Only fastboot works, but still can't install rom via because I didn't unlocked the bootloader yet and didn't check for usb debugging.
Any ideas would be really appreciated.
Regards
zakenz said:
Hi everyone,
everything is in the title, yesterday I bricked my Mix when I tried to install a new version via recovery (Mi Pc suite chinese version).
It updated, started working (I entered the rom) then restarted because it asked for a reset, had to say yes, when it restarted I was in a bootloop of Xiaomi logo and couldn't go into recovery mode anymore.
Only fastboot works, but still can't install rom via because I didn't unlocked the bootloader yet and didn't check for usb debugging.
Any ideas would be really appreciated.
Regards
Click to expand...
Click to collapse
So you still be able to flash official with miflash?
When I try to flash via Mi flash it says critical partition error thing (probably because I still don't have unlock the bootloader)
zakenz said:
When I try to flash via Mi flash it says critical partition error thing (probably because I still don't have unlock the bootloader)
Click to expand...
Click to collapse
Shouldn't need unlock to install genuine ROM from xiaomi with miflash, you are using the fastboot ROM right?
Likewise USB debugging shouldn't be necessary, as far as I know. Like if you have no ROM it wouldn't know anything about USB debugging.
Yes I'm using fastboot rom
On this page: http://en.miui.com/a-234.html You can see Mi Mix is listed as it needs to unlock before any flash with fastboot.
When I try flash with MiFlash, it says Flash xbl error : https://i.imgur.com/ct0xAQY.png
zakenz said:
Yes I'm using fastboot rom
On this page: http://en.miui.com/a-234.html You can see Mi Mix is listed as it needs to unlock before any flash with fastboot.
When I try flash with MiFlash, it says Flash xbl error : https://i.imgur.com/ct0xAQY.png
Click to expand...
Click to collapse
You have unpacked the file correctly?
Think they mean if you're not using miflash.
http://xiaomitips.com/guide/how-to-flash-miui-fastboot-rom-on-mi-max-with-locked-bootloader/
Don't know if it would work on mix
Yes I did, with all the bat files the images folder.
I'll try one more time when I get home.
Or wait some days to get the unlock permissions by xiaomi
zakenz said:
Yes I did, with all the bat files the images folder.
I'll try one more time when I get home.
Or wait some days to get the unlock permissions by xiaomi
Click to expand...
Click to collapse
Might be safer to just wait. If you do it now you will have to do it again in a day.
I tried to unlock again with no success, it says error because I didn't enable the "OEM Unlock" option..
Any suggestions?
zakenz said:
I tried to unlock again with no success, it says error because I didn't enable the "OEM Unlock" option..
Any suggestions?
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=4Q4MopLMprE
EDL not working on Mix models.. I already tried and it bootloops again
zakenz said:
EDL not working on Mix models.. I already tried and it bootloops again
Click to expand...
Click to collapse
Yea no edl mode but thought maybe that might work
---------- Post added at 06:30 PM ---------- Previous post was at 06:29 PM ----------
james1089 said:
Yea no edl mode but thought maybe that might work
Click to expand...
Click to collapse
Just never heard of anyone been bricked when fastboot is available. Didn't read it just something to check
https://www.technobuzz.net/use-mi-pc-suite-to-flash-fastboot-rom-on-bricked-xiaomi-phones/
I'm kinda ****ed.. gotta replace it
james1089 said:
Just never heard of anyone been bricked when fastboot is available.
Click to expand...
Click to collapse
Because of bootloader not unlocked and usb debugging disabled. Thanks for help though
james1089 said:
Just never heard of anyone been bricked when fastboot is available. Didn't read it just something to check
https://www.technobuzz.net/use-mi-pc-suite-to-flash-fastboot-rom-on-bricked-xiaomi-phones/
Click to expand...
Click to collapse
I tried without success
Do you know why can't I get in recovery mode anymore ?
zakenz said:
Do you know why can't I get in recovery mode anymore ?
Click to expand...
Click to collapse
Have you tried reinstalling the recovery,
From command prompt or from the same command prompt , reboot recovery. Any of these useful?
https://www.google.co.uk/amp/s/www....0-basic-terminal-commands-you-should-know?amp
I'm sure you have disabled driver signature on Windows but just checking.
james1089 said:
Have you tried reinstalling the recovery,
From command prompt or from the same command prompt , reboot recovery. Any of these useful?
https://www.google.co.uk/amp/s/www....0-basic-terminal-commands-you-should-know?amp
Click to expand...
Click to collapse
These are all adb commands and since I don't have usb debugging enabled :/
And yes signature disabled
zakenz said:
These are all adb commands and since I don't have usb debugging enabled :/
And yes signature disabled
Click to expand...
Click to collapse
Last option is "deep flash cable" to go into edl mode, buy 1 or make 1
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..
So, I have Xiaomi MI 8. Problem is, that phone is without any ROM at the moment. I did flashing and by mistake locked the phone, when checked in MiFlash box, where says "flash and lock" or something similar. So my phone fastboot is locked now and I cant flash it, because I locked and in MiFlash shows error.
I can also use Miunlock, because debbuging is off, because I cant even turn it on. ADB is not working also without debbuging allowed. Any ideas what can I do? how to flash my OS?
I fixed it with test points
astraler6n said:
So, I have Xiaomi MI 8. Problem is, that phone is without any ROM at the moment. I did flashing and by mistake locked the phone, when checked in MiFlash box, where says "flash and lock" or something similar. So my phone fastboot is locked now and I cant flash it, because I locked and in MiFlash shows error.
I can also use Miunlock, because debbuging is off, because I cant even turn it on. ADB is not working also without debbuging allowed. Any ideas what can I do? how to flash my OS?
I fixed it with test points
Click to expand...
Click to collapse
Try with EDL mode...
For EDL mode I think you have to open it to access the test point ...
I wish you luck because I destroyed the screen of my mi A1 the second time I had to open it
laugeek57 said:
Try with EDL mode...
Click to expand...
Click to collapse
Yes, that's what I did and now is flashing, but takes hours.
astraler6n said:
Yes, that's what I did and now is flashing, but takes hours.
Click to expand...
Click to collapse
According to my recollection it only lasts about ten minutes ...
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
I cant go to service center as my device is out of warranty
in google there is a pc program than can unlock bootloader of mediatek devices, search for it
Bro i cant access the bootloader, so unlocking it doesnt make any difference
I want to restore the bootloader.
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
Okay so first of all download "mtk client"
Than open the mtk client
It will give you instructions on how to connect your phone, take back of everything except system(super),vendor and userdata. Tap on flash tab there you'll notice a option called unblock bootloader tap on it and your bootloader will be unlocked
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Manmeet_2008 said:
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Click to expand...
Click to collapse
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Ok bro thanks for your help
tutibreaker said:
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Click to expand...
Click to collapse
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
try some sp flashtool that come with miflashtool , turn off phone and press volume- and plug the cable in , some type of mtk download mode
Ok bro i will try tomorrow
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Manmeet_2008 said:
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Click to expand...
Click to collapse
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
tutibreaker said:
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
Click to expand...
Click to collapse
Ok bro thanks for telling, will not use it for flashing
Did it work is it debricked?
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
hookkrox said:
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
Click to expand...
Click to collapse
You need to see the PM I've sent to you. You will find it here.
Start from BROM mode - that is always available. Then you can use mtktool to restore everything. I have an article about it on my blog, but I am not supposed to post it here... find it in my profile, or send me a PM for help.