i was trying to get back to android 2.2 from gb as its signla reception got messed up... i was using smartflash... but in between the process... time out error occured and from then on, my phon is not responding to any operation... it is niether going into s/w udate mode, nor it shows any display when attempting to power on it... any advices?
I was in the same situation. This topic helped me a lot http://forum.xda-developers.com/showthread.php?t=1007825
i doubt if my phon is getting into apx mode... i tried but no such thing appeared - " new apx device found" which generally appears in apx mode...
Did you check 'Device Manager'? The APX must be there under the section "Other devices" or "Uknown devices". Do you hear sound when you plug your phone into your computer?
Try whole procedure with battery then without batter by pressing the volup and voldown buttoms, or just simply plug your phone into the computer without pressing any buttoms. After each try wait about 1-2 minutes then check Device Manager. If the APX does not appear in device manager give it a try on another USB port.
I hope you will be able to bring your phone back to life.
Hello everyone,
It seems that my worst nightmares came up, and got my device bricked while trying to flash it to a stock ROM (had a custom multilingual ROM installed by the chinese seller), and now it's in a strange stage, as Windows detects the Qualcomm port, but adb can't see it.
The adb devices list is in blank, and QPST detects everything, but when trying to flash the device, the error message on the screenshot appears.
Also tried to do it with MiFlash, but didn't worked too.
Any idea about how to solve this?
Thank you in advance for your help.
P.D.: My device is in black screen, so no menu or anything.
P.D.2: Already downloaded the Android SDK in order to try it's ADB, but it didn't worked too.
Now after some research, I found out that the "ADB interface" is not showing in Windows device manager
I tried to install it manually, but can't find a way to get it working, and after the flash, USB debugging was set on, so can't figure out what could be happening...
Is it possible it's completely dead?
Any idea?
Just to say that I have tried multiple combinations while plugging the device to the PC, and didn't worked...
I mean, the PC seems to react, but always with the same end, only shows the Qualcomm port 9008, nothing about the adb...
Getting out of ideas, anyone more has some?
did you start the tool with admin rights?
read a Little bit here
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
if you have a Z2 pro take this
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Zukunft said:
did you start the tool with admin rights?
read a Little bit here
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
if you have a Z2 pro take this
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Click to expand...
Click to collapse
Yeah, I already started the cmd with admin rights, but the problem is that adb does not works, as the device is not turning on.
As you can check in my first post, in the screenshot, after running the "adb devices" command, it doesn't gives any kind of error, just returns a blank list.
Noggin said:
Yeah, I already started the cmd with admin rights, but the problem is that adb does not works, as the device is not turning on.
As you can check in my first post, in the screenshot, after running the "adb devices" command, it doesn't gives any kind of error, just returns a blank list.
Click to expand...
Click to collapse
adb will never recognized it, in 9008 mode or it's called EDL, the only program that recognized the port is QFIL / Miflash. if you get an error when flashing you must reset your phone again to repeat the process by pressing power button for a couple seconds. if your bootloader already unlocked that must be simpler to do, just press power button for a couple minutes until shor vibration then press vol up + vol down and connect to usb at the same time..
arif_kholid said:
adb will never recognized it, in 9008 mode or it's called EDL, the only program that recognized the port is QFIL / Miflash. if you get an error when flashing you must reset your phone again to repeat the process by pressing power button for a couple seconds. if your bootloader already unlocked that must be simpler to do, just press power button for a couple minutes until shor vibration then press vol up + vol down and connect to usb at the same time..
Click to expand...
Click to collapse
Thanks for the info, I've tried the vol + and vol- buttons after the short vibration, and the PC does not detect the device...
Is it there any other way to get the device detected by the PC?
Actually, the only thing the device does, is the following:
After pressing the PWR button for around 5-7 seconds, it makes a short vibration and the notifications led makes a flash in green colour, but nothing more... If you keep pressing it, around 7-8 later, it makes a litte bigger vibration and a flash on green too... And if you continue, it does on, and on, and on...
Any idea? Anyone told me about getting a Xiaomi Deep flash cable, but I'm not sure about if that will work or not...
Noggin said:
Thanks for the info, I've tried the vol + and vol- buttons after the short vibration, and the PC does not detect the device...
Is it there any other way to get the device detected by the PC?
Actually, the only thing the device does, is the following:
After pressing the PWR button for around 5-7 seconds, it makes a short vibration and the notifications led makes a flash in green colour, but nothing more... If you keep pressing it, around 7-8 later, it makes a litte bigger vibration and a flash on green too... And if you continue, it does on, and on, and on...
Any idea? Anyone told me about getting a Xiaomi Deep flash cable, but I'm not sure about if that will work or not...
Click to expand...
Click to collapse
i've already tried xiaomi deep flash cable, and its work on my z2 plus, that's how to force phone into 9008 mode.. and also, dont add space between folder names where your firmware files there or there will always sahara fail
Hey man!
I had the same Problem!
Sahara error, no reaction from device, black screen, port recognized in qfil etc.
I found out that this behaviour of the device means, that it is in EDL-mode.
what helped ma was:
1) Unplug everything.
2) Set up the QFIL Tool completely, but do not hit "Download Content".
3) Try to "reboot" the Zuk Z2 Pro by pressing the power button for several seconds. Kind of resets everything.
4) Plug in USB
5) execute: "adb reboot edl" via adb
6) unplug USB
7) plug in USB and immediately (within a second!) hit the "Download Content" buton, just after it is clickable.
8) dowload should start without sahara error
Hope it works! :good:
Well, finally, I talked with the aftersales dpt from the shop where I got the device, and returned it, and incredibly it seems it was defective.
The guy from the tech dpt said that it wasn't supposed to die that way, so they returned me a brand new device, and fortunately it's up to date with ZUK's last official ROM.
Thank you everyone for your ideas and help, now I can enjoy this great device
My Zuk Z2 plus got stuck after TWRP, I need help badly.
sirmclord said:
Hey man!
I had the same Problem!
Sahara error, no reaction from device, black screen, port recognized in qfil etc.
I found out that this behaviour of the device means, that it is in EDL-mode.
what helped ma was:
1) Unplug everything.
2) Set up the QFIL Tool completely, but do not hit "Download Content".
3) Try to "reboot" the Zuk Z2 Pro by pressing the power button for several seconds. Kind of resets everything.
4) Plug in USB
5) execute: "adb reboot edl" via adb
6) unplug USB
7) plug in USB and immediately (within a second!) hit the "Download Content" buton, just after it is clickable.
8) dowload should start without sahara error
Hope it works! :good:
Click to expand...
Click to collapse
I will tell my issue
I bought this device this July month, I was encouraged seeing you guys did a lot of flashing, I thought I could flash myself but it became a nightmare now.
I am not that much technical so please bare my usage of words below, but I need a real help.
I was doing the basic TWRP for getting the AICP ROM 12.1 but after wiping the data from TWRP my device doesnt get recognized for the Sideload and I did whatever I can but it doesnt detect my phone, so I am having a screen with Start "Green" which is showing the device status as unlocked and when I click on Recovery it goes to the Zuk logo and doesn't have any sign after that.. stuck really
I tried using QFIL but my device detects as 900H but not 9008 also adb doesn't detect my device at all after this.
I think I really did a hard brick of my device.
I dont want to loose hope, I want your help really badly.
For those of you who had the same problem don't give up! I was in that same situation and I solved by putting my phone on EDL via this method
https://www.youtube.com/watch?v=2m44xKog-dI
After plugging the phone for the second time and QFIL recognize as EDL mode I clicked on download content as fast as I could so it started to flash the ROM that I spent like 10h trying to figure a way to do it lol. Anyways, the procedure is the same as putting into EDL via adb fastboot, the only difference is that you make it through a "fake" deep flash cable as that guy in the video shows.
My Zenfone 4 ZE554KL is bricked and only shows on windows Qualcomm HS-USB QDLoader 9008, after I tried to debrick it from fastboot, using a firmware raw image, and putting the incorrect fastboot reboot command
"fastboot reboot emergency" and now is after I plug the usb stick it shows on windows as the QComm Com port but I tried to see guides, read everything, tried to use QFIL to check if something works and QPST
But still without success
Current phone status is a black screen and nothing else, already attempted to hold power, some few sequences with Vol Up, Vol Down still nothing.
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
lelele5 said:
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
Click to expand...
Click to collapse
try flashing stock rom
Thank you for the reply. Will get back to you as soon as I get an answer from him.
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Your friend need to do Flash Point
Ask him to google "How to flash a qualcomm soc with qpst via com port". I'm sure he'd find a lot of videos on youtube guiding through the entire process. Also tell him to keep the stock fastboot rom downloaded, coz he'll be needing that.
Flashing a wrong rom destroyed the partition table of his device. If he cant fix it himself, tell him to visit a nearby service centre. He'll get the device back in a few days or so.
lelele5 said:
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Click to expand...
Click to collapse
all is fine ...
he can flash it in miflash in edl mode
if computer can see the 9008 com port he is already in edl
the error with hello packets is because he waits too long to start flashing ..he needs to unplug phone then when he plugs it in he must have everything prepared then press flash quickly
he can wait for battery to run out of charge ...then prepare miflash ...then plug in phome ...the EXACt moment it wakes press flash
then it will work
Thanks a lot for your time and help everyone. He got frustrated and sent it to a service center. I couldn't convince him. It works fine now, though.