Related
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
You're welcome.
Unfortunately, I can't provide guides for procedures I never went through.
But I asume that you could just flash any Custom ROM after you completely wiped your phone in step 4. So instead of flashing OOS 3.2.6 afterwards, just flash a custom ROM. Be sure that you have all zips you need on your internal storage and a backup to revert back to, if anything goes wrong. Otherwise you will have to use ADB sideload to install a ROM.
Ok, so I have a Modified TWRP installed already. Question is If I want to flash other ROMS after wiping system,dalvik/cache,data etc. Do I have to Flash official TWRP first followed by firmware,ROM, etc?
or firmware first then ROM and lastly official TWRP?
it's quite confusing.
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
gigeaky said:
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
Click to expand...
Click to collapse
Flash modified TWRP, and the recovery will return. then, follow the guide. it happened to me too.
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
First flash modified TWRP than install official 3.2.4 than flash CM ROM or custom ROM
uniQ191 said:
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Click to expand...
Click to collapse
worked like magic. Thankyou for this education. it didnt work when i followed other folks. Much appreciated.
So it seems I have booted with 3.5.2 and modified recovery. Now my question is: can I reboot in recovery at step 7 and install the original twrp recovery? Or can I use flashify? As I don't have access to a pc
I did ok but cant use adaway do you have a fix for it?
Enviado do meu ONEPLUS A3003 através de Tapatalk
I'm trying to return to 3.2.6 after trying 3.5.2.
However, after flashing and booting 3.2.6, I boot into fastboot mode and the official TWRP refuses to flash. It reports that it's failed and then I'm left with no recovery until I reflash the modified TWRP.
I could try restoring my Nandroid backup of 3.2.6 with the modified TWRP, but I'd prefer to return to the official TWRP before doing this.
Any suggestions?
Edit: Fixed it. I downloaded the official TWRP again and it flashed. The first download must have been corrupted.
I followed a different method and successfully downgraded today to a former nandroid. I was rooted without xposed.
3.2.6 to 3.5.2 dirty flash
- installed modded twrp
- performed backup on 3.2.6
- installed modded 3.5.2 (the only that flashes in twrp)
- installed root SR1
- wiped caches only
- reboot
3.5.2 to 3.2.6 restore
- downloaded 3.2.6
- boot to modded twrp, wipe both caches, data, system
- flashed 3.2.6 stock and root SR1
- restored 3.2.6
- wiped caches
- reboot
- enjoying my LTE again
Without first installing stock, after a restore my phone was boot locking right after the oneplus white logo (capacitive buttons would light up, but it would not boot to red logo). Had to press vol down and power to force it to boot menu to select recovery and get back to twrp
Hope this helps someone, it's a bit easier than swapping twrps and no need to boot up/flash 3.2.x twice.
So if I am on the CB and want to go back to 3.2.6
I can flash 3.2.6 with the modded TWRP
Then flash Official TWRP and boot?
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
popab said:
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
Click to expand...
Click to collapse
i would also like to know this please
bigup7 said:
i would also like to know this please
Click to expand...
Click to collapse
I did it and it does work perfectly. Just make sure to wipe data from recovery after flashing.
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
null0seven said:
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
Click to expand...
Click to collapse
I am on CB Freddom os
I want to go back either to stock or to op3lite.
I cant reboot to recovery.
But adb works yet.
What to do plz suggest.
Sent from my ONEPLUS A3003 using Tapatalk
1. If system don't boot. Reboot to fastboot.
- Flash recovery.img. If PC don't see youre phone option 2.
2. If system boots, open phone like normal.
- Extract recovery img. Put it on the TWRP file on phone sd card.
- Download Flashify from play. Open it, flash img of recovery. Open recovery to chech if it works.
Try with both recovery (3.0.2.0 or modified 3.0.2.-19). One of those will work.
Im getting system partition has unexpected contents after OTA update after installing step 5 ????
Hello out there,
my problem is a bit annoying. Everything is fine if I use my OP3T with Oxygen (4.0.3) and TWRP (3.0.3-1). But I want to use LineageOS with TWRP and cant, because my TWRP isnt working after flashing lineage.
"Normal"-Setup:
- TWRP 3.0.3-1
- Oxygen 4.0.2 or 4.0.3 (doesn't matter)
- supersu 2.79
- Encrypted Device
"Lineage"-Setup:
- TWRP 3.0.3-1
- lineageOS (lineage-14.1-20170214-nightly-oneplus3-signed.zip OR lineage-14.1-20170208-nightly-oneplus3-signed.zip - tried both, doesnt matter)
- supersu 2.79
- openGApps for 7.1 nano
- Encrypted Device
My Problem is, that I can boot up lineage and use it, but if I reboot into my TWRP to flash something or make some Backups, it asks for my encryption-passphrase, it says it is okay and boots into the twrp main-windows. After that I can't touch anything (stuck in mainmenu) and after a few seconds it results into a black screen (plus white LED) and I am forced to reboot the device. After that reboot I have to reconfigure lineage (seems to loose data).
Does anyone have an idea how to fix this annoying "bug"?
Thank you very much!
Atomique
EDIT: I found that Thread after searching for a issue like that in the lineageOS official Thread - I will try this and report! - Thank you! https://forum.xda-developers.com/on.../recovery-official-twrp-oneplus-3-3t-t3543391
I had the exact same problem when I hab LineageOS installed! It would always lose all its data. After flashing and reflashing a hundred times, I ended up reverting my OP3T back to stock using a OnePlus forum guide (I'm a new user, so I can't post the link). I am now back to OOS 4.0.3 but can't even get SuperSU to work. Whenever I flash it (with or without the dm-verity fix) the phone is stuck booting forever.
I found the post you linked to aswell but haven't tried flashing LineageOS using the new TWRP. But I can tell that the new version doesn't help rooting OOS...
Did you have any luck flashing LineageOS by now?
Edit: With the newest Lineage Version I always get an error when trying to flash it. Do you have the same problem? The nightly from two weeks ago seems to work better.
Use latest TWRP 3.0.4.1
nitinvaid said:
Use latest TWRP 3.0.4.1
Click to expand...
Click to collapse
That's what I'm doing... Could the dm-verity be a problem? There are two versions, one with opt and one with force in the name.
Thank you for your replies! The link (TWRP 3.0.4-1) worked like a charme!
@Tafelbomber: I would recommend you to start from scratch. But please be warned: you will loose your data! Make a backup first!
1. Delete everything with fastboot -w
2. Flash the recovery noted in my first post with fastboot flash recovery <twrp-filename.img>
3. Optional: Restart into the TWRP and flash the OOS 4.0.3 to make sure that you have a clean OS installed befor flashing lineage
4. Flash lineage OS + additional ZIPs (like supersu, betterbatterystats, Gapps etc)
5. Clean Dalvik and Cache!
6. Reboot and have fun. --> Sometimes you get problems with the encryption chain (Red Error --> in my case the fastboot -w did it for me)
Good luck - I will close this thread - thanks again for your help!
Atomique
EDIT: I want to close this thread, but I don't know how.
There is confusion over which recoveries to install for Redmi 6 (cereus).
Failure to install the correct TWRP will result in a hard brick with no chance of restoring the device without an authorised account or going to a Mi Service Centre.
If you are currently on the MIUI Oreo ROM:
You may ONLY use TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
The recovery by either TWRP or LR.Team is both ok.
If you are on the PIE rom:
You MUST use TWRP 3.3.1 or OrangeFox Recovery. R10.0-2 nocrypt Pie is confirmed to be working by me.
To root MIUI pie, follow the instructions in this post from 4PDA. This is because you will be unable to decrypt data.
You need to create an account to download the patched boot.img. You can either create one yourself or ask me or someone else to PM you with the boot.img. I will not attach it to this thread because it is not my work. The files have now been attached. See post below.
All credits go towards the respective recovery authors and 4pda
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
I did something wrong just don't know what
I tried with OrangeFox and when rebooted in recovery the phone would not turn on and just vibrates.
I was lucky because I just needed to open and remove the battery to get the phone back up.
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
0) Download patched boot image from OP
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> Flash patched boot.img -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
would this be the correct procedure?
cheers
snoerme said:
So just to get it right (please correct me if i'm wrong):
Starting from unlocked MIUI stock with android 8.1 base:
1)Download TWRP 3.3.0 OR 3.2.3-0 OR 3.2.3-1
2)Download Magisk 19.3 Stable (would the latest stable also work https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445?)
3)Download official Pie Rom: http://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip
4)Enter Fastboot -> Flash TWRP
5)Enter TWRP -> Flash the Pie Rom -> flash Magisk
6)Boot into system -> Leave the device alone for 2-3 minutes and install Magisk Manager
7)Download -> TWRP 3.3.1 or OrangeFox Recovery. R10.0-2
8)Enter Fastboot -> Flash TWRP/OrangeFox
cheers
Click to expand...
Click to collapse
?????????????????????
Why don't you skip steps 1-3 and just use XiaoMi Flash to install 10.4.4.0 via Fastboot by 'saving user data', then follow the instructions here? XiaoMiFlash will overwrite your recovery with the default so there is no risk of a brick. Then Flash TWRP Pie, flash boot img, flash magisk.
As I have said, you will brick your device. If you have TWRP Oreo, and then you install MIUI Pie, you will brick your device. You are doing EXACTLY what I told you not to do!
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
edit: do you know if the latest magisk stable 20.0 would also work?
snoerme said:
It didn't come out as clearly as you think. maybe it's my own deficiency.
btw whenever i flashed any update via TWRP the recovery got replaced by stock recovery as well.
(I don't tell this to call into question that your suggested way of doing was the most safe way.)
Is XiaoMi Flash available for linux as well?
Click to expand...
Click to collapse
I'm not sure - I have never flashed any MIUI ROM in TWRP. It seems normal though - the updaterscript probably tells TWRP to overwrite itself.
https://forum.xda-developers.com/android/software/tool-miflash-linux-t3708847 It's a bit complicated
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot and enjoy
Hi, currently I'm on stable China mui v10.4.3.0. Do you have boot.img on that v10.4.3.0. Currently link only provide boot.img for v10.4.2.0 for the china version. If no how do I get those, can I just backup them from twrp, Then create patched boot img with those backup boot? Thanks
Che0063 said:
OK here are the boot files from 4pda
You MUST follow the instructions from this guide: http://4pda.ru/forum/index.php?showtopic=907017&st=5020#entry87853533
All files obtained from 4pda.ru - from a post by MCMXCII
Full credits go towards the authors of the respective .imgs
Click to expand...
Click to collapse
Thanx for boot_10.4.4.0_R6_mgsk_193.img :good:
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
ThanX ! ! !
This work for me :good:
EDIT:
The flashlight and the camera does not work after flash the boot boot_10.4.4.0_R6_mgsk_193.img [emoji848]
Does anyone else have a similar problem?
View attachment 4862683
I have the camera and flashlight problem too. Any fix?
Unfortunately, I didn't find any solution.
Currently, my phone does not start, has a black screen and vibrates all the time. I can't run it in any way
EDIT:
Hi.
I was able to bring the phone to life. Get instructions on how to get to the battery https://www.youtube.com/watch?v=L9FH88b16bc https://www.youtube.com/watch?v=fAflA4UKLLY. In orangeFox recovery I checked the flashlight, it works.
That makes us two. My phone is unusable at the moment. I thought the root was responsible for the camera bugs, I uninstalled magisk, the bug was still there. I tried to reinstall MIUI 10.4.4 ang got an error. I've wiped everything including vendor and system.
I clean dalvik and cache and for now the phone is working even, after flash the patch boot.img
ribou said:
This work for me :
1 - Install Pie Rom https://bigota.d.miui.com/V10.4.4.0.PCGMIXM/miui_HM6Global_V10.4.4.0.PCGMIXM_99304098f7_9.0.zip with TWRP 3.3.1 https://mifirm.net/downloadtwrp/62 or with another method.
2 - Shut down the phone , go to fastboot (Vol - and power), plug to computer.
3 - From the computer fastboot flash boot boot_10.4.4.0_R6_mgsk_193.img (see the second post of this thread).
4 - fastboot flash recovery recovery-TWRP-3.3.1-0602-REDMI6-CN-wzsx150.img
5 - Recovery (Vol+ and power)
6 - Install Magisk 19.3
Reboot an denjoy
Click to expand...
Click to collapse
Hello this is the steps i did but when rebooting to recovery i end up on blackcreen or mai i say powered off screen with the device unable to boot to recovery,any ideas what i did wrongly?
It seems there is something wrong with that boot patch. I followed a procedure on youtube and my phone is succesfully rooted without any bug
@ambyy
what guide did you use on YouTube?
Wysłane z mojego Redmi 6 przy użyciu Tapatalka
https://www.youtube.com/watch?v=I_4Zmco9R78&t=25s
Hard brick caused by flashing wrong TWRP is indeed able to get solved with unplugging the battery.
Miui v11 boot.img please
I installed crDroid and flashed disable-dm-verity and my phone stopped reacting to touch
How I can fix it?
please close this :/
edit: nope
Hello,
I'm actually running fine a CrDroid on android 12 without issue.
Here's how i flashed it :
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
From another XDA Post : https://forum.xda-developers.com/t/...onsive-with-custom-roms.4342665/post-86009079
Except i didn't fhashed an old CrDroid release, but the latest. Android 12 work just fine on my Juice with the same screen as yours
i fixed the touch issue using just boot.img from xiaomi.eu rom but wi-fi didn't work and now when i tried flash it, i got bootloop.
i won't try this bcs i don't have good internet now but when i will have good internet, i'll try it.
anyways, thanks
Btw, latest version (crdroid 8.7) don’t work even if I used this method. I’m actually running crdroid 8.6 without any issue
uzurka said:
Btw, latest version (crdroid 8.7) don’t work even if I used this method. I’m actually running crdroid 8.6 without any issue
Click to expand...
Click to collapse
Hi. Can you put the link here to the crdroid you installed pls. And about this steps:
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
You can dirty flash Xiaomi.eu Rom upon original 12.5.11 global (which i have now) and then the crdroid 8.7 upon Xiaomi.eu Rom or you need to wipe data/cache/system then install the crdroid and then format data ? And one more thing, does fox recovery work well ( touch and settings etc) because who tried some time ago, touch was irresponsive or not boot at all in recovery and say only twrp brigudaw and pitch black recovery was working on nvt touch. Thanks.
Hey !
This is the rom i actually use
What i did is flash the Xiaomi.eu rom upon the latest MIUI Global flashed via Fastboot
Right after flash, without any wipe, i flashed crdroid/gapps/magisk
Boot, test touchscreen, it would work correctly
hmm people tell 8.6x work but I have very bad internet speed so... is 8.7x working? bcs i don't have time to download 8.7x and after that 8.6x
Touchscreen don’t work at all with 8.7. Flash 8.6
uzurka said:
Touchscreen don’t work at all with 8.7. Flash 8.6
Click to expand...
Click to collapse
thanks
Hello,
This won't work for some reason. I flash spesn_global_images_V13.0.5.0.SGKMIXM_20221020.0000.00_12.0_global with fastboot.
Then I boot TWRP with fastboot boot twrp.img. I then install xiaomi.eu_multi_HMNote11_V13.0.5.0.SGKMIXM_v13-12.zip in twrp.
But then it just keeps booting to recovery.
Did anybody try this or have tips?
Thanks.
I don't remember exactly what I did, but I think I flashed the fastboot version and then updated
Be sure to get the version of recovery for the android version you want to flash. Or that was the case back then.
Be sure to format /data as well, not just wipe
Okay, I got it working like this:
1. Flash xiaomi.eu_multi_HMNote11_V13.0.10.0.RGKMIXM_v13-11-fastboot
2. Fastboot boot into OrangeFox-R11.1_A12.1-Unofficial-spes
3. Push xiaomi.eu_multi_HMNote11_V13.0.5.0.SGKMIXM_v13-12.zip via adb to /data/
4. reboot to bootloader
5. fastboot boot into twrp-3.6.1_11-0-spes
6. install xiaomi.eu_multi_HMNote11_V13.0.5.0.SGKMIXM_v13-12.zip and format data
7. reboot
Very annoying it doesn't work by just flashing the xiaomi eu zip on anything.
Strange, I got mine working first time flashing using TWRP 3.6.1
A bit of a messy procedure is required because of several technical changes from Android 11 to Android 12.
Plus, Xiaomi's messy encryption makes things worse.
Use TWRP 3.7.0