So whenever i turn on my phone i get a quick flash of the linux penguin and then i get to the fastboot menu i cant get to recovery mode or anything im stuck in fastboot the only thing that works with fastboot menu is power off this happened because i really wanted to get root but when i flashed it to boot_a it said okay but nothing happened so i just did boot and now i messed up:crying:
ALL I EVER WANTED WAS Android 10 Genic system image and TWRP i used a unoffical build and flashed that to recovery nothing happended it said okay and i even tried booting the image i just get into a boot loop untill i unplug the cable i tried to flash the stock firmware using fastboot it flashed successfully but nothing changed PLEASE HELP also did this void my warrente I unlocked the bootloader and tried to Root BUT HELPPPPPPPPPPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Check if the solutions in this form work
https://forum.xda-developers.com/nokia-4-2/help/nokia-4-2-bricked-enter-fastboot-t4059437
Related
I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
I have same issue....Phone is ib bootloop...i can still go to fastboot mode....
Anything can be done here????
Flash an factory image with flashtool then you will have original recovery. Then reinstall CWM, maybe smth went wrong.
Tried flashtool---Ended up with errors as attached pic
As i cant bootup my phone...USB Debugging option cant be ticked
I was running SlimLP (unofficial) while bricked my phone....
Anything on that please....
I managed to recover my phone. I don't think you need usb debugging for flash tool. What I did was turn the phone off (power and volume up seem to be the buttons that force shutdown and break the reboot loop).
flashtool will prompt you to connect when you flash the ftf file and you hold power up and volume down when you connect the usb cable. If you have issues flashing (it hanged on me on system.bin) try restarting your computer.
Resolution and Problem Exp
Right after flashing the device recovery through fastboot the USB cable is plugged and that seems to loop the boot loader, so you need to force shutdown while looping by pressing POWER + VOLUME UP, and after that unplug the USB cable. You will notice that on boot now the light is no longer red.
splitthepositive said:
I recently got a z3c and decided to try to get a slim rom on it.
I have done the following:
I unlocked the bootloader.
This was done successfully to the best of my knowledge
The next thing I did was flash a cwm image to by z3c using fastboot. The problem was that I flashed the z3 version on my z3c.
The device would boot but the screen would be blank.
Later I flashed the z3c boot loader named : Z3c_DooMLoRD_AdvStkKernel_v01_FW-105
After this the device goes in a boot loop. I am able to access CWM.
I have tried to root the phone as well as flash the slim rom in an attempt to fix it....
Wiping disk / cache doesn't help.
Also for some reason even though adb drivers are installed I cannot use it so I can't get the twrp install to work.
I have no idea what to do can someone please help?
Thanks,
stp
Click to expand...
Click to collapse
Hey there!
Here's the thing. I was using MIUI v7, which I figured to install after doing a hard-brick to my phone and resurrecting it from death.
I wanted to try a Lollipop AOSP ROM I found here, but seems I screwed it up. No, actually I f***ed it up. I guess the TWRP version I had was incompatible, or something. Even seemed the flashing was successful, every time I tried to turn off the device it rebooted. I couldn't reboot it into recovery either, seems the flashing deleted it or screwed it up. Now all I got is the infamous red blinking light. No Sony logo. Nothing.
So I tried to flash a stock ROM with flashtool, but even in flash mode the phone keeps rebooting like each minute! So it's impossible to flash it.
The only state the phone is not auto-rebooting is when I reboot it into fastboot mode. I was looking for flash the stock firmware with fastboot, but I dont' find there a boot file (I mean, inside the .ftf files) and I'm unsure about the procedure to flash it, if there's even one... Can someone give me an advice? Thanks!
Nevermind, I flashed CM's recovery via fastboot and although I couldn't flash CM ROM with fastboot (It said 'command not found') once on CM's recovery I flashed CM ROM! If needed, please remove this thread.
Stuck in the same state (using SP Flash Tool) but unfortunately no custom recovery available for my phone (Nokia 1 ta-1056).
Phone goes to fastboot mode upon connecting USB to flash stock ROM via SP Flash Tool, making it impossible to flash
Any advice?
I updated my oneplus and i got the TWRP decryption message, so i formatted it back to the stock format.
now all the phone does is boot into the bootloader but gets stuck on the boot screen of Blu Spark 3.1.1
my computer wont recognize it while its in the bootloader or while its stuck trying to boot in twrp
is there anything i can do or is my phone screwed at this point? i see a lot of threads that would answer parts of my issue but nothing that covers this as a whole. id rather ask for help now while there may be some hope.
nickhawkjones said:
my computer wont recognize it while its in the bootloader or while its stuck trying to boot in twrp
Click to expand...
Click to collapse
So no response to fastboot commands, while in bootloader-fastboot mode?
Are you sure you installed the right drivers for your pc? If all else fails, you can do this.
This is how I fixed my phone when i was stuck at a black screen. You can also try a different usb cord or port. Check device manager and see if it recognizes it when its plugged in. hope this helps!
https://www.youtube.com/watch?v=BvfA5WrVDQM
can you boot into fastboot? if your phone can boot to fastboot mode..just flash stock recovery image..then flash rom via adb shell (better flash the stock rom). if it works you can reinstall the custom recovery image or something. dont forget to erase everything via stock recovery..
Hi everyone!
Since yesterday i am having problems with my phone, first it briked after a normal update, thanks god i unlocked the fastboot before, i installed a custom OS but didn't liked it, so i wiped both partition (and i think i ****ed up there)
So now i can still enter fastboot mode, but everytime i try to send fastboot boot judypn_TWRP_bootable-metadata.img (that yesterday worked) not it's not working anymore, it just boots normally and remain stuck in bootloop
On my microsd i put the img of twrp with metadata HavocOS and twrp zip too, yesterday i could install and enter in recovery mode them without any problem, today the boot img is sent but the phone "ignores" it.
PS. I can enter fastboot mode without problem, download mode isn't working
Thanks to anyone who can help!
Sporalinux said:
Hi everyone!
Since yesterday i am having problems with my phone, first it briked after a normal update, thanks god i unlocked the fastboot before, i installed a custom OS but didn't liked it, so i wiped both partition (and i think i ****ed up there)
So now i can still enter fastboot mode, but everytime i try to send fastboot boot judypn_TWRP_bootable-metadata.img (that yesterday worked) not it's not working anymore, it just boots normally and remain stuck in bootloop
On my microsd i put the img of twrp with metadata HavocOS and twrp zip too, yesterday i could install and enter in recovery mode them without any problem, today the boot img is sent but the phone "ignores" it.
PS. I can enter fastboot mode without problem, download mode isn't working
Thanks to anyone who can help!
Click to expand...
Click to collapse
So first, the forum you posted this in is called 'Roms, Kernels, recoveries and other development'... so which 'development' is this? a Rom? a Kernel? a Recovery?
None of the above right? So what you have is a 'question', and it should be in 'Questions and Answers'. Sorry if that offends, but if someone wants to find something in these forums, then posts need to be in the appropriate places...
First thing I'd do would be to get the phone's download mode (lgup) working again and flash a stock kdz. That way you can basically 'start over' (and hopefully have better results with your endeavors).
try this initially: Follow this link and read the 'notes' file. Hopefully that will give you lgup, if it doesn't then it's a more involved process to use edl and flash, basically, a whole image.
cheers
I tried flashing back to MIUI 13, but my brain thinks that the flashing takes long, so I stopped it, restarted it and then the fastboot logo appears, means that I completely bricked the phone, I tried flashing to recovery, TWRP comes in and it won't load, any help on how to get it working again?
BMHater12 said:
I tried flashing back to MIUI 13, but my brain thinks that the flashing takes long, so I stopped it, restarted it and then the fastboot logo appears, means that I completely bricked the phone, I tried flashing to recovery, TWRP comes in and it won't load, any help on how to get it working again?
Click to expand...
Click to collapse
Flash again twrp via fastboot from PC.
Then go on with a recovery ROM via twrp....
Or flash complete stock fastboot image via PC
It's not a good idea to stop ROM flashing. If you can get to fastboot, you can flash again.