Hi everybody
Tried to install a custom rom on my device and it has turned out to be a disaster. I'm completely stuck and have no idea what to do next. Tried everything i could find but i keep having the following problem.
Device: mi k20 davinci
Bootloader: unlocked
TWRP file: twrp-3.3.1-0-davinci.img
ROM: davinci_global_images_V11.0.4.0.QFJMIXM_20200117.0000.00_10.0_global_4c094d085a
TWRP had been succesfully installed but i broke it somehow and now i'm back in the fastboot mode. When trying to re-flash and boot twrp i recieve the following error:
"FAILED (remote: Failed to load/authenticate boot image: Load Error)"
If i try to flash the stock ROM with the miflash tool i receive the error
"Antirollback check error" "error"
if possible i just want to go back to stock and forget about this for now
Post it in K20 and not K20 Pro section.
I didn't know K20 had antirollback protection. Maybe try to flash a newer miui version, maybe a beta ?
Have you also tried "fastboot boot twrp.img" ?
oldbait said:
Hi everybody
Tried to install a custom rom on my device and it has turned out to be a disaster. I'm completely stuck and have no idea what to do next. Tried everything i could find but i keep having the following problem.
Device: mi k20 davinci
Bootloader: unlocked
TWRP file: twrp-3.3.1-0-davinci.img
ROM: davinci_global_images_V11.0.4.0.QFJMIXM_20200117.0000.00_10.0_global_4c094d085a
TWRP had been succesfully installed but i broke it somehow and now i'm back in the fastboot mode. When trying to re-flash and boot twrp i recieve the following error:
"FAILED (remote: Failed to load/authenticate boot image: Load Error)"
If i try to flash the stock ROM with the miflash tool i receive the error
"Antirollback check error" "error"
if possible i just want to go back to stock and forget about this for now
Click to expand...
Click to collapse
Flash Fastboot ROM through Command Prompt. https://in.c.mi.com/thread-334-1-1.html?t=1586384142148
Related
Phone oneplus3t, 64GB model EU
Oxygen OS 3.5.4
Android 6.0.1
Bootloader: unlocked
Im having problems with flashing/booting TWRP
It flasheh succsesfully, but it doesnt boot. This is the error i get in the comand prompt: Boot twrp: failed (remote: dtb not found).
I tried flashing it via oneplus3t "all in one tool" and i tried it with downloading only the TWRP.img and flashing it in comnad prompt myselfe. Always the same problem. I also tried a modified TWRP which i found on the thred here somewhere: same problem.
It flashes, but doesnt "open" or boot. Right after I flash it if i click "recovery" it just goes back to the fastboot menu where i started.
I also tried this before i updated it on the oxygen 3.5.4
Please help, Thanks
Did you use the specific twrp recovery for the 3T? This one: https://dl.twrp.me/oneplus3t/
And did you follow a guide. This one for instance: https://forums.oneplus.net/threads/...wrp-root-nandroid-efs-backup-and-more.475142/
jann32 said:
Phone oneplus3t, 64GB model EU
Oxygen OS 3.5.4
Android 6.0.1
Bootloader: unlocked
Im having problems with flashing/booting TWRP
It flasheh succsesfully, but it doesnt boot. This is the error i get in the comand prompt: Boot twrp: failed (remote: dtb not found).
I tried flashing it via oneplus3t "all in one tool" and i tried it with downloading only the TWRP.img and flashing it in comnad prompt myselfe. Always the same problem. I also tried a modified TWRP which i found on the thred here somewhere: same problem.
It flashes, but doesnt "open" or boot. Right after I flash it if i click "recovery" it just goes back to the fastboot menu where i started.
I also tried this before i updated it on the oxygen 3.5.4
Please help, Thanks
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=kTdKmceC5xU watch this video
Hey All, I flashed TWRP 3.3.1 from the offical TWRP app, but when my phone rebooted it goes to:
ERROR MODE
Attention!
Please update System again
Error!
Func NO : 11 (recovery image)
Error NO : 2 (load failed)
I can get to fastboot, but the functions are extremely limited and I keep getting
Phone Unlocked
FRP Lock
Whenever I try to flash using fastboot, I keep getting an error
"FAILED (remote: 'Command not allowed')"
I think this has to do with the FRP Lock, but I can't figure out how to unlock it???
Can anyone provide any help? Is my phone a literal brick now?
Any help is appreciated!!
My mi 8se is unlocked and twrp is installed the before.
My phone stuck at fastboot after update,
neither miflash or flashing twrp is worked.
miflash shows error message “ error:FAILED (remote: Check device console.)”
flashing twrp or boot image are failed.
shows the message FAILED( remote: Error flashing partition : Device Error )
I need help to solve this issue.
solved
problem solved by flashing system.img and boot.img.
however twrp cannot be flashed, still return error message in miui 11.0.2.0 china rom.
I have the same problem with Mi8 SE
hello i'm desperate The same thing happened to me when updating android 11.0.2 China. I tried flashing system and boot (are they come in android rom fastboot type?) but I get the error in CMD
“FAILED <remote: Error flashing partition“: write Protected>
I have the bootloader unlocked. hope help me please
so here how i bricked my phone.
i wanted to try new miui 12 on my k20 pro .so i download the latest beta release from official sources, then what i did next is change the device name in update script of miui 12 zip file ,i replaced 'Raphael' by 'Raphaelin' as i am using Indian variant after tring it for some time i decided to go back to my previous version as i had an backup.
After i restored my back up and reboot it went into boot loop , keeps booting till logo.(restore was 100%ok)
so next i took it to just install a custom rom ,i decided upon pixel rom and installation went successfully but on reboot option it showed me no os installed .
So i decided what the **** lets just go to stock rom using 'mi flash tool' (i have used this method as last resource many time before in case if all went to ****) but in this time it showed my an error of mismatching image and device . i don't know why this happened as i have done it many times before and every time it went pretty ok.
then i tried to boot to recovery but to no avail it was not happening i keep booting into bootloader next what i did is try to reflash my recovery
fastboot flash recovery twrp.img
it went ok
then
fastboot boot twrp.img
it showed me an error
creating boot image...
creating boot image - 38807552 bytes
Sending 'boot.img' (37898 KB) OKAY [ 0.836s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed.
so my current situation is i can't boot into recovery and i install stock miui with mi flash .
so Guys any idea why this all is happening.
Are you able to boot into recovery by using 'volume+' and power button combination?
pankajgulia111 said:
so here how i bricked my phone.
i wanted to try new miui 12 on my k20 pro .so i download the latest beta release from official sources, then what i did next is change the device name in update script of miui 12 zip file ,i replaced 'Raphael' by 'Raphaelin' as i am using Indian variant after tring it for some time i decided to go back to my previous version as i had an backup.
After i restored my back up and reboot it went into boot loop , keeps booting till logo.(restore was 100%ok)
so next i took it to just install a custom rom ,i decided upon pixel rom and installation went successfully but on reboot option it showed me no os installed .
So i decided what the **** lets just go to stock rom using 'mi flash tool' (i have used this method as last resource many time before in case if all went to ****) but in this time it showed my an error of mismatching image and device . i don't know why this happened as i have done it many times before and every time it went pretty ok.
then i tried to boot to recovery but to no avail it was not happening i keep booting into bootloader next what i did is try to reflash my recovery
fastboot flash recovery twrp.img
it went ok
then
fastboot boot twrp.img
it showed me an error
creating boot image...
creating boot image - 38807552 bytes
Sending 'boot.img' (37898 KB) OKAY [ 0.836s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed.
so my current situation is i can't boot into recovery and i install stock miui with mi flash .
so Guys any idea why this all is happening.
Click to expand...
Click to collapse
What ROM did you try and restore in the Mi Flash Tool?
If you tried an Indian ROM, then try to flash a Chinese ROM instead.
pankajgulia111 said:
so here how i bricked my phone.
i wanted to try new miui 12 on my k20 pro .so i download the latest beta release from official sources, then what i did next is change the device name in update script of miui 12 zip file ,i replaced 'Raphael' by 'Raphaelin' as i am using Indian variant after tring it for some time i decided to go back to my previous version as i had an backup.
After i restored my back up and reboot it went into boot loop , keeps booting till logo.(restore was 100%ok)
so next i took it to just install a custom rom ,i decided upon pixel rom and installation went successfully but on reboot option it showed me no os installed .
So i decided what the **** lets just go to stock rom using 'mi flash tool' (i have used this method as last resource many time before in case if all went to ****) but in this time it showed my an error of mismatching image and device . i don't know why this happened as i have done it many times before and every time it went pretty ok.
then i tried to boot to recovery but to no avail it was not happening i keep booting into bootloader next what i did is try to reflash my recovery
fastboot flash recovery twrp.img
it went ok
then
fastboot boot twrp.img
it showed me an error
creating boot image...
creating boot image - 38807552 bytes
Sending 'boot.img' (37898 KB) OKAY [ 0.836s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed.
so my current situation is i can't boot into recovery and i install stock miui with mi flash .
so Guys any idea why this all is happening.
Click to expand...
Click to collapse
You need to remove these lines from .bat files within fastboot ROM folder. or if you are on Linux then corresponding lines from .sh files.
Code:
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphaelin" || echo Missmatching image and device
fastboot %* getvar product 2>&1 | findstr /r /c:"^product: *raphaelin" || exit /B 1
Robbo.5000 said:
What ROM did you try and restore in the Mi Flash Tool?
If you tried an Indian ROM, then try to flash a Chinese ROM instead.
Click to expand...
Click to collapse
It worked , I have indian variant but it showed mismatched image and device.
But it worked well with global variant , I flashed mi 9t pro global version.
Thanks
pankajgulia111 said:
It worked , I have indian variant but it showed mismatched image and device.
But it worked well with global variant , I flashed mi 9t pro global version.
Thanks
Click to expand...
Click to collapse
I got into the same issue, just go into the flash_all file of the indian stock rom and change it into raphael and it will work as charm.
Senior_Pj said:
I got into the same issue, just go into the flash_all file of the indian stock rom and change it into raphael and it will work as charm.
Click to expand...
Click to collapse
How to modify flash_all file on Windows 10
toufik_d said:
How to modify flash_all file on Windows 10
Click to expand...
Click to collapse
Notepad++
Senior_Pj said:
Notepad++
Click to expand...
Click to collapse
I tried and could not change it
toufik_d said:
I tried and could not change it
Click to expand...
Click to collapse
I did it last week
Senior_Pj said:
I did it last week
Click to expand...
Click to collapse
thank you very much
It has been modified with another program and transferred to the Indian version
Hello guys!
I am having issues with the battery (I think it's faulty) and I just wanted to reflash the EU MIUI Stable ROM to see if it's a software problem.
Currently with unlocked bootloader (no root) EU MIUI 13 STABLE and Android 12.
What I did:
didn't remember if I had TWRP installed and flashed EU MIUI 13 STABLE via Fastboot
MIUI 13 - MIUI 13 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
linux_fastboot_update_rom.sh was successful
but now stuck in MIUI Recovery mode after every boot
I guess I had TWRP installed and this is why it got issues?
So I decided to fix it by installing TWRP first, and then flash ROM via TWRP:
found official TWRP for Mi 11 here: https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4374109/
installed this via fastboot: fastboot boot twrp-3.6.2_11-0-venus.img
did "Advanced > Flash Current TWRP"
stuck in TWRP Recovery mode boot
did TWRP Wipe data (since required by installing the ROM)
stuck in Fastboot mode
it might have removed by mistake /system or /persist, I just did the default Wipe Data of TWRP
Device is correctly recognized with fastboot devices but I get this error when trying to boot with TWRP:
Code:
$ fastboot boot twrp-3.6.2_11-0-venus.img
Sending 'boot.img' (196608 KB) OKAY [ 4.999s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
Do you guys have any tip to recover the device? Any help very much appreciated
dlime3004 said:
Hello guys!
I am having issues with the battery (I think it's faulty) and I just wanted to reflash the EU MIUI Stable ROM to see if it's a software problem.
Currently with unlocked bootloader (no root) EU MIUI 13 STABLE and Android 12.
Click to expand...
Click to collapse
Seems you use a A11 TWRP for a A12 rom
Use A12 https://androidfilehost.com/?w=files&flid=321497
NOSS8 said:
Seems you use a A11 TWRP for a A12 rom
Use A12 https://androidfilehost.com/?w=files&flid=321497
Click to expand...
Click to collapse
You are right!
I just tried to boot with that but I still got that the same error:
Code:
$fastboot boot twrp-3.6.2_12-v6.0_A12-venus-skkk.img
Sending 'boot.img' (196608 KB) OKAY [ 5.203s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
Any way to debug this?
dlime3004 said:
You are right!
I just tried to boot with that but I still got that the same error:
Code:
$fastboot boot twrp-3.6.2_12-v6.0_A12-venus-skkk.img
Sending 'boot.img' (196608 KB) OKAY [ 5.203s]
Booting FAILED (remote: 'Failed to load/authenticate boot image: Load Error')
fastboot: error: Command failed
Any way to debug this?
Click to expand...
Click to collapse
Dowload this rom https://sourceforge.net/projects/xi...13.0.8.0.SKBCNXM_v13-12-fastboot.zip/download
extract it
Phone in fastboot plug in to the pc
Open the folder
Use" first install.bat" according your OS
First boot take a long time.
Lastest TWRP BOOT
https://sourceforge.net/projects/recovery-for-xiaomi-devices/files/venus/
NOSS8 said:
Dowload this rom https://sourceforge.net/projects/xi...13.0.8.0.SKBCNXM_v13-12-fastboot.zip/download
extract it
Phone in fastboot plug in to the pc
Open the folder
Use" first install.bat" according your OS
First boot take a long time.
Click to expand...
Click to collapse
Thank you very much! I've run the "first install" script and managed to recover the phone!
Would PM me your PayPal? I'd like to get you a coffee
dlime3004 said:
Thank you very much! I've run the "first install" script and managed to recover the phone!
Would PM me your PayPal? I'd like to get you a coffee
Click to expand...
Click to collapse
Here all is FREE !!!!!!!!!!!!
Amazing, hope I can help in the future as well
@NOSS8 im so thankful for your response as i was facing this problem today after trying to move away from pixel experience and going back to stock. you are the hero of the day.