My Dad somehow bricked my old Huawei P10 VTR-L09 by replacing the screen while I was abroad.
- unable to boot in fastboot. (only blackscreen, eventually ending up in "eRecovery"
- no unlocking whatsoever / no messing in the developer options
- doesn't show up in ADB
Is there anything I could try?
eRecovery doesn't work?
qtotter said:
eRecovery doesn't work?
Click to expand...
Click to collapse
No, unfortunately not. "Getting package info failed"
Related
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot
Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4
morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs
@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working
Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:
morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?
MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:
Sorry for being late, i had no spare time the past days. Glad you fixed your problem
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
I've gone through that before, but ended up using DC-Phoenix to unbrick it when it's FRP and bootloader locked. Cost me about $15. There is a post on how to do this but I'll have to search for it again.
Here is the post I used:
https://forum.xda-developers.com/showpost.php?p=71767614&postcount=7
I guess you enter fastboot by Vol- and Power?
Not sure if the following method could help you with, but you can analyze before you go for dc-phoenix:
https://forum.xda-developers.com/showpost.php?p=74169408&postcount=7
scammander said:
Hi,
I have a P9 here I'm was asked to repair. I think it is kind of bricked and I hope some one can help me to unbrick it.
According to the auto dc-unlocker identification:
Found Phone : EVA-L09
Firmware : EVA-L09C432B386
FB LockState: LOCKED
USER LockState: LOCKED
So, bootloader locked and FRP locked. I don't know if the Firmware version above is right. All I know is that some Update.app files were flashed to the state of the phone now and before there where bootloops while the start animation and stuck boot with black screen.
At the moment I can do:
- turn on to see only the first huawei log with "powered by android", then nothing happens
- I can not enter eRecovery or update for Update.app
- I can only enter fastboot
I have the unlock code for the bootloader. I can not commit any fastboot commands (oem unlock, flash, etc) all is blocked with:
FAILED (remote: Command not allowed)
The locked FRP should be the reason for this.
I think OEM-unlock and usb debug from developer section was not enabled as the phone was usable. adb commands like "adb reboot bootloader" fail with
error: device '(null)' not found
fastboot devices shows the device
I have tried to uncharge the battery and then try to enter other modes than fastboot. No luck with that.
Do I have any chance to unbrick it without paying for the dc-unlocker/phoenix?
Can I do something with SRKTool?
If I have to use unlocker,
- do I have to unlock the bootloader?
- should I flash the same firmware that is now on the phone (B386) and where can I find it? (found only 1000 other versions until now)
Hope for answers
Click to expand...
Click to collapse
So you can not update via dload method? Did you try booting into recovery (not Recovery)? And you can't update with Update.app, you need to flash update.zip and full_update.zip via TWRP or Recovery. What wanted the owner of this phone to do, that he bricked it ?
Thank you all for your answers. Like I tried to describe: I was not able to access any other mode than fastboot.
"was able": I used DC-Phoenix now and it worked just fine.
Little confusing is that in all tutorials, even the on on the DC site, the UI of the tool is different.
But that's now Problem. The current Version is lot easier. Just "Standard Mode", select Update.app (full), Click Update.
The Phone gets flashed with fastboot, DC will restart it to update mode and will flash again. All automatic.
Really easy.
so you paid 15 USD ?
DallasCZ said:
so you paid 15 USD ?
Click to expand...
Click to collapse
Yes I did, and it worked.
Hello everyone
My brother's Mi A2 is bricked for no reason. I tried to solve this problem and searched a lot but didn't manage to solve it. I hope you can help.
* before telling my story here is some stuff to know:
- The phone was running official firmware and bootloader is locked, I've never played with it's software before.
- Oem unlocking option isn't turned on.
- The phone doesn't go to recovery mode, only fastboot or regular boot.
- I used EDL mode in every flashing attempt.
- I don't remember that there is a mi account assigned to the device.
* Here is what happened:
- The phone suddenly shut down during a call and never passed the AndroidOne logo after that.
- Tried EDL mode and miflash to flash the latest firmware. Flashing completed successfully but the phone still stuck on the androidone logo.
- Did it again and again but the result was constant.
- Tried flashing older firmware "Oreo 8.1" but during flashing system.img the process stopped with an error. (I don't remeber what the error was).
- I tried to turn on the phone but after showing AndroidOne logo This message appeared:
"Your device is corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABH"
and the device shuts down in a minute.
Hint: Sometimes when I try to turn one the phone the above message appears after androidone logo and sometimes the device just keep showing the logo.
- Trying to flash any firmware version by using Miflash Beta gives an error message "Can not found programmer file" immediately. when I try again it gives: "can't read from port COM4", Changing the port gives the same error with different port number.
-When I use any other version of "Portable miflash", The flashing process starts normally but fails when trying to flash "dsp.img", giving an error of "writing time out".
- I tried reinstalling all drivers needed with no change at all.
I hope that you guys can help me solving this problem.
Thank you so much!
Try EDL mode opening your phone...
Badotti said:
Try EDL mode opening your phone...
Click to expand...
Click to collapse
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Ahmed A. Mohsen said:
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Badotti said:
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Click to expand...
Click to collapse
I opened the phone and used edl mode already but the problem is still present.
up
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
HTCDevil said:
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
Click to expand...
Click to collapse
This needs bootloader to be unlocked and my device's bootloader is locked.
Any solutions?
Go to service center this is last option you save RIP mi a2 ?
As I can see from picture you have posted, your bootloader is unlocked.
SkullSatan88 said:
Go to service center this is last option you save RIP mi a2
Click to expand...
Click to collapse
They refused to receive my device because I bought it from another country.
bomil said:
As I can see from picture you have posted, your bootloader is unlocked.
Click to expand...
Click to collapse
when I checked bootloader status in the beginning it was locked.
Are you sure that it's now unlocked?
Text me on telegram. @dejavutr
Hello ive a p9 lite l31. It crashed when it was updating. The phone is not opening. Stuck on huawei logo. How can i recover my photos images from phone? Is there an any way?
no I called huawei, they said use erecovery. I tried but no way. It says "Getting package info failed". I am sure that my wifi is fine. I tried on other wifi but it crashes again.
So i cannot open the phone because phone stuck on huawei logo. How can i fix it?
btw i have no twrp , no bootloader, no root.
taha129 said:
Hello ive a p9 lite l31. It crashed when it was updating. The phone is not opening. Stuck on huawei logo. How can i recover my photos images from phone? Is there an any way?
no I called huawei, they said use erecovery. I tried but no way. It says "Getting package info failed". I am sure that my wifi is fine. I tried on other wifi but it crashes again.
So i cannot open the phone because phone stuck on huawei logo. How can i fix it?
btw i have no twrp , no bootloader, no root.
Click to expand...
Click to collapse
Stock Huawei OTA update for P9 Lite in 2021?
Yusef Kifah said:
Stock Huawei OTA update for P9 Lite in 2021?
Click to expand...
Click to collapse
it wasnt a new update.
Unlocked my P10 like this Tutorial:
But it won't boot.
It is possible to open the recovery, but only a WLAN option is offered and no firmware is available.
Fastboot Mode is not accessible.
Is there a Way to fix this?
Hello, nobody who can help me?
i have the same problem with a p9 lite but i can't do anything, fastboot mode or erecovery are also not working.