Database Develop

First Things To Do After Getting My Mi Mix?

Just found out that I have a Mi Mix waiting for me when I get home. I've made a checklist of what I want to do to it to get it setup for my use. I wanted to know if anyone had anything to add or has done any of what I'm planning on.
Unlock Bootloader
This should be relatively simple. I already have my unlock permission and will be using the directions from here: http://en.miui.com/thread-202290-1-1.html
As far as I can tell by reading that thread, I do not need to install the developer ROM first. Is this correct?
I will also follow the top reply to this thread which mentions linking your device to your Mi account before unlocking to prevent errors: https://m.reddit.com/r/Xiaomi/comments/5co8t1/mi_unlock_approval/​
Install TWRP
My plan is to follow these instructions: http://forum.xda-developers.com/mi-mix/development/recovery-official-twrp-xiaomi-mi-mix-t3498960
This is where I start having questions. I've been out of the rooting and ROMing game for a couple of years. Does anyone recommend rooting with anything other than SuperSU? I'm reading that it was bought by a Chinese company and shouldn't be trusted. I've also read that using Magisk you can have root that is easily turned off. I'll admit I'm pretty lost at the moment when it comes to what Magisk does and how to use it. But if it is the recommended way of doing things I will do the research to learn it.​
Flash The EU ROM
I think my plan is to flash this EU ROM which debloats everything and seems to come with gapps and a lot of other nice optimizations: https://xiaomi.eu/community/threads/6-11-10.36056/
My first question is has anyone tried this?
My second question is will I need to reinstall TWRP and re-root? I think I will have to re-TWRP because on the TWRP page there is one version for stock and one for the EU version. I will be on stock first and I can't flash EU until after I flash TWRP. So I think the procedure will have to be:
Flash stock TWRP
Flash EU ROM
Flash EU TWRP
Re-Root?
Turn Off All Battery Optimizations
Don't have a guide for this yet but I'm guessing it's not hard to find. Feel free to reply with one if you have one.​
Personalize
Launchers/Themes/Icon Packs/etc. Don't need suggestions here since I already know what I have in mind.​
Anything else?
The only other thing I can think of that I might want to install is Xposed. I've never used it and don't know how to install it but I'll learn if I can be convinced that it's something I want.
What else am I missing?​
I think right now the biggest thing I'm curious about is if anyone has used the EU ROM and what the procedure is if you use that ROM since there are 2 different versions of TWRP for the Mi Mix. But any other suggestions on what to do with the initial setup or how to make my experience better are welcome. I'd also love to hear about any "gotchas" that aren't mentioned in the guides from people who have actually done it.

Well I took the plunge without waiting for feedback and for anyone who is interested, I'll answer my own questions. Read the posts that I linked in the OP to understand what I'm doing below. I will not cover how to get unlock permission as this has been covered elsewhere.
Unlock Bootloader
As far as I can tell by reading that thread, I do not need to install the developer ROM first. Is this correct?
Click to expand...
Click to collapse
This is not correct. You must install the Dev ROM and connect to WiFi and follow the steps to enable Developer options and login to your Mi account in developer options.​
Install TWRP
Before installing TWRP you must update back to the stable ROM. The non-EU version of TWRP will not work with the Dev ROM as of this posting. You can update to the stable ROM using the same steps as updating to the developer ROM. In the TWRP install guide I linked above, I stopped right after step 6 and continued below.​
Flash the EU ROM
Instead of flashing SuperSU after installing TWRP, I copied over the EU ROM linked above and flashed that. Then I followed the instructions starting from step 3 of this post to flash SuperSU, Magisk, and suhide: https://www.reddit.com/r/pokemongod...k_v7_systemless_xposed_v866_released/d8d7ziw/
The only change I made is that in between steps 4 and 5, I flashed the EU version of TWRP before continuing because otherwise the touchscreen would not work in TWRP. I used the most recent versions for the SuperSU, Magisk, and suhide and I did not flash Xposed yet but I believe I can do that in the future if I want to.​
That's where I'm at now. The rest of my checklist was mostly personal preference so I won't go into that. Hope this helps.

@chimera533
THX for taking the plunge & sharing your results with us.
I'm sure I'll be doing the same once mine arrives, hope you don't mind if I look this way if I have any questions regarding TWRP/Root/etc.....

Thank you for posting this, this is the exact list of what I will be doing when my Mi Mix comes in the mail (C'mon Ibuygou).

I couldn't seem to find a EU rom for Mi mix though it is listed in the thread as a supported drive. Will you please drop me the link to download? Thank you.

jim380 said:
I couldn't seem to find a EU rom for Mi mix though it is listed in the thread as a supported drive. Will you please drop me the link to download? Thank you.
Click to expand...
Click to collapse
I think I got mine from here: https://megadysk.pl/f/6.11.10
Just scroll down to the Mi Mix one.
There are 3 repositories to the 6.11.10 weekly ROMs at the top of the page here: https://xiaomi.eu/community/threads/6-11-10.36056/
As far as I know there are no stable EU builds for the Mi Mix probably because it's so new.
Also I believe the weekly updates show up here: https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
The Mi Mix was skipped for 6.11.17 as evidenced by the note at the top of the 6.11.17 thread.
That's about all I know. I highly recommend reading all or most of every link I posted here. I'll confess that if I had, I would've known things like having to flash back to stable before TWRP-ing as well as some other things.

It would be nice if you did an edit of your original post, rather than a 'by the way' post below it. It would be much easier to follow the instructions.
I've installed TWRP on multiple phones. The dm-verity stuff is new to me (A xiaomi/MIUI thing I guess),
so the sequence appears to be:
install Official MIUI China developer ROM
<unlock>
install Official stable rom
install Official (Non-EU) TWRP (requires stable)
copy/install EU ROM after step 6 (aka before exiting TWRP)
< Do you reboot now and go back into fastload now? or stay inside TWRP? >
Install EU TWRP
install supersu (again, before you exit TWRP?)
Install Magisk, suhide?

Apologies but I'm away from home at the moment. I'll update the OP with more detail when I have a bit more time. But I'll give you some quick answers below.
install Official MIUI China developer ROM
Remember to log in to your Mi account in the developer options
<unlock>
install Official stable rom
install Official (Non-EU) TWRP (requires stable)
copy/install EU ROM after step 6 (aka before exiting TWRP)
While still in TWRP, install SuperSU in systemless mode.
Boot to system once
Boot back to fastboot and install EU TWRP
Boot to TWRP and install Magisk, suhide
Boot to system and install magisk manager

Got the Mi Mix 128GB overpriced in Thailand, but without any waiting time.
Love your early thread, very helpful.
I also want to get twrp, suhide, magisk and xposed, but I like to stay on the Chinese Dev or official ROM, not xiaomi.eu, because I like the paid themes which are only available on official ROMs.
I've got a MIUI developer account for 4 years, so I can unlock the device directly, being on stable ROM.
Now the steps are a bit unclear for me. Do I understand them correctly?
1. Unlock bootloader
Download and install the developer rom: http://en.miui.com/download-317.html
Create/Login with your MI Account on the device.
Apply for unlocking the bootloader here: http://en.miui.com/unlock/
Install stable ROM if desired
2. Install official TWRP (NON-EU)
Boot into fastboot mode by turning off your device then pressing volume up and power button
Install Minimal ADB and Fastboot on your PC: http://forum.xda-developers.com/showthread.php?t=2317790
Download the correct TWRP image file: https://dl.twrp.me/lithium/twrp-3.0.2-0-lithium.img.html
Copy the twrp file to where minimal adb and fastboot has been installed and rename the twrp file to twrp.img
Open fastboot on your computer and type:
Code:
fastboot flash recovery twrp.img
Code:
fastboot reboot
3. Install SuperSU in systemless mode
Download newest SuperSU: https://play.google.com/store/apps/details?id=eu.chainfire.supersu / http://download.chainfire.eu/1013/SuperSU/SR4-SuperSU-v2.78-SR4-20161115184928.zip
In ADB shell or TWRP shell, type
Code:
echo SYSTEMLESS=true > /data/.supersu
if you don't already have this file to configure SuperSU to install in systemless mode.
Flash SuperSU.
4. Boot to system
5. Boot into TWRP, install Magisk, suhide, Xposed
suhide: http://forum.xda-developers.com/apps/supersu/suhide-t3450396
systemless xposed 86.2: http://forum.xda-developers.com/attachment.php?attachmentid=3897543&d=1475913773
magisk: http://tiny.cc/latestmagisk
6. Boot to system and install Magistk Manager
magisk manager: http://tiny.cc/latestmanager
7. Install XPosed

chimera533 said:
I think I got mine from here: https://megadysk.pl/f/6.11.10
Just scroll down to the Mi Mix one.
There are 3 repositories to the 6.11.10 weekly ROMs at the top of the page here: https://xiaomi.eu/community/threads/6-11-10.36056/
As far as I know there are no stable EU builds for the Mi Mix probably because it's so new.
Also I believe the weekly updates show up here: https://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
The Mi Mix was skipped for 6.11.17 as evidenced by the note at the top of the 6.11.17 thread.
That's about all I know. I highly recommend reading all or most of every link I posted here. I'll confess that if I had, I would've known things like having to flash back to stable before TWRP-ing as well as some other things.
Click to expand...
Click to collapse
Thank you so much for your help. I installed the ROM and have had it running for 2 days now. Coming from a HTC 10 (custom ROMed and everything), I;m really not digging MIUI on this phone. Lags so much it's literally driving me crazy. My 2 yrs old LG G2, which also has amazing screen-to-body ratio btw, runs circle around this phone. Really disappointed about this phone due to the software performance issues.

jim380 said:
Thank you so much for your help. I installed the ROM and have had it running for 2 days now. Coming from a HTC 10 (custom ROMed and everything), I;m really not digging MIUI on this phone. Lags so much it's literally driving me crazy. My 2 yrs old LG G2, which also has amazing screen-to-body ratio btw, runs circle around this phone. Really disappointed about this phone due to the software performance issues.
Click to expand...
Click to collapse
I don't experience any lags on the original ROM.
From my experience those micro-lags and performance issuese showed up on various devices in my Android past whenever something was wrong with the ROM. A clean flash mostly helped solve the problem.
I'm currently on the original Chinese stable with SuperSu and TWRP. It's blazing fast. What's the reason to flash the xiaomi.eu rom?

underlines said:
I don't experience any lags on the original ROM.
From my experience those micro-lags and performance issuese showed up on various devices in my Android past whenever something was wrong with the ROM. A clean flash mostly helped solve the problem.
I'm currently on the original Chinese stable with SuperSu and TWRP. It's blazing fast. What's the reason to flash the xiaomi.eu rom?
Click to expand...
Click to collapse
I had a nightmare trying to get to the EU Rom yesterday, I was mostly successful, however after a reboot i'd lose Touch in both TWRP and System. Thanks to this post from Chimera533 I was finally able to do it!
Anyway the main reason for the EU ROM is to get rid of all the Bloat and Chinese throughout the ROM that you cannot get rid of. It also has Google Services baked in properly so everything works correctly.
I also had a few other little niggles while on the Chinese ROM :-
Purchases from Google Play Movies wouldn't work
No Smart Lock while connected to Android Wear
No way to replace BAIDU and set Google as the search
So far i'm loving the EU Rom, i've not seen any lag at all while using it and pretty much everything seems to work exactly as it should - it has enhanced the MIX experience so much for me - love this thing!

Guys, how do I disable all battery saving optimizations / memory management optimzations? My background apps keep shutting automatically off after a while.
I'm on the default ROM without root (still waiting for developer approval)...

yakuzlin said:
Guys, how do I disable all battery saving optimizations / memory management optimzations? My background apps keep shutting automatically off after a while.
I'm on the default ROM without root (still waiting for developer approval)...
Click to expand...
Click to collapse
Go to the battery section & have a look around, you should find several settings for battery management.
You're gonna need root & an app such as Titanium Backup Pro, or, SD Maid Pro to disable a lot of the MIUI & Cheetah Mobile applications.
Fine tuning on a per app basis isn't enough (do not optimize battery savings for the apps you want to work properly, notifications, messaging, etc) .....
I highly recommend flashing the EU ROM, it seems to have better memory management than the Global ROM, but, you'll still need to disable a lot of the MIUI apps & all of the Cheetah Mobile s***ware to get memory management more to what you're used to experiencing.
One other item, go to Developer Options & disable MIUI Optimization, it should be the last item or close to it....

Zenfone Go Oreo help

Hi someone with an account on 4dpa with 30 posts could please download this rom and share it here? I don't know Russian so it's impossible for me to write 30 posts.
I have a Zenfone Go (Z00VD) and the stock ROM it's terrible (crash in the camera, 1 Gigabyte of app space already full....)
In case you can't, could you provide an alternative ROM with as less bugs as possible?
Thank you
Original Thread 4pda
Translated Google

Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.

JustAnormalGuy said:
Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.
Click to expand...
Click to collapse
Hi, not yet, it's not my phone so I'm searching a stable ROM. I saw the nougat thread here but it's not very clear what works and what not, there seems to be a nougat rom on 4dpa which should work well except the videocamera with the stock app, but the Oreo one seems almost bug free although more complex to install. Unfortunately I can't access it.

Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!

aurismat said:
Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!
Click to expand...
Click to collapse
Those 2 bugs are not a deal breaker for me, would you mind linking to the ResRemix 5.7.4 rom that you used?

Sure, buut since I can't post links(thanks XDA for 10 post restriction, love ya!), I'll have to send one another way.
PM me your Discord handle(if you have one) or something else. I should be able to send you the link there.

aurismat, and what version of twrp do you use ?

I use TWRP 3.0 by Jemmini. It's been a *long* time since I installed it though, so if you have something different, I'm afraid I won't be of much help unless I'll be able to pull my recovery .img file.

Actually, i use the same version. Problem is most probably my method of root. The common method of rooting for our device didn't include any flashing with sp flash tool. But for my situation, my bootloader is locked even after downgrading. So i did the other method (also found on the forum) in which includes flashing.

Hmm, it *may* be the root method, may be also the locked bootloader.
If I recall right(and this might be THE common way), I used the fastboot method from XDA, and I knew it'd work cause I rooted more phones that way. I remember downgrading the stock ROM down to version 39(i think that one still had the bootloader check in dev options) and then trying to unlock the bootloader and obviously go through flashing the recovery image.
Dunno what might be the issue with your way of flashing, though. AFAIK might be anything from leftover files to bootloader giving the finger.

@aurismat i think the problem might be that i used the "format all + download" option on sp flash tool. Does that affect the phone in any way that deprives my phone from using 6.0 - 7.0 roms? (Besides the "null" imei effect)

@JustAnormalGuy I don't think it should be a problem, because the ROM .zips install their own stuff to the partitions AFAIK, so even if Flashtool wipes everything, it should still be fine. Try doing one of them ROMs(previously said ResRemix worked for me), but remember to wipe the Internal Storage partition if you can.
Oh and remember to take a backup of your current ROM, should it bootloop again at least you won't have to do the hassle of reinstalling everything back(learned that the hard eay haha).
EDIT: was it just Nougat ROMs that you were trying or was it both Nougat and Marshmallow? Not sure what might be the cause, but the ROMs developed under the same kernel from ska-vova in 4PDA worked for me. Just a thought.

well actually i already tried various roms from Marshmallow to Nougat all of which gave me bootloops. I've already followed the steps of installation as written. However, i tried once installing a Marshmallow rom from the facebook group named "ASUS Zenfone Go Indonesia" and it surpisingly worked for me (numerous bugs present however), as well as most of the marshmallow (and only marshamallow roms) on their group.
The thing is I also might think one of the reasons why i get the bootloops in the roms from the 4pda forum is the kernel used in them. (just speculation) Should it be correct to assume that ?
As I recall:
Working rom shows "kernel version > [email protected]"
Not working rom - "kernel version > [email protected]"

Hmm, I'm using [email protected] kernel version 3.18.19.
All the ROMs there seem to be by mosly nik-kst's kernel. ska-vova seems to just build ROMs with the kernel.
Besides, take note from the working ROM - it's also from 4PDA.
Only thing I can speculate is that your device is somewhat different(maybe different hardware, not sure) and hence why it gives you BLs.
Dunno, this case is a tough cookie to be honest - only thing I can recommend at this point is to flash literally EVERYTHING back to stock and try using fastboot method to get recovery and root back.

Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!

aurismat said:
Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!
Click to expand...
Click to collapse
Nice! Resurrection Remix is working too well to bother, but who knows in a few months!

That would be great man, thanks !!

Xt1920 pettyl

Hi there. I have the UK varient which is not the same as the us version. I'm looking for info regarding root and custom roms. All info I can find points toward the us (James) varient.
Any info or links greatly appreciated

ok so update, found this thread but not sure if the information is correct, thoughts or experiences please
https://forum.xda-developers.com/moto-e5/how-to/moto-e5-xt1920-15-pettyl-unlock-t3859586

mac_d4di said:
ok so update, found this thread but not sure if the information is correct, thoughts or experiences please
https://forum.xda-developers.com/moto-e5/how-to/moto-e5-xt1920-15-pettyl-unlock-t3859586
Click to expand...
Click to collapse
That's my thread and yes the information is correct.
If you are not sure yourself that the information I have posted is correct, then I suggest you stop thinking about rooting your E5 or flashing custom ROMs.
You have to remember no one has tested the rooting/flashing procedures on PETTYL.
Everything that's listed here on XDA is designed for James/Nora/Hanna devices so no one has tested anything on our devices as it's newer and not many have it.
All the GSIs (custom ROMs) are only listed as working on the James/Nora/Hanna devices, there is currently no support offered for PETTYL, although technically they should work.
The devs of those other devices and the resources for them claim everything should work on our E5 as its treble compatible, but unfortunately that's not quite correct.
If you are really not sure about anything, or don't know if information is correct, you will have problems.
Im not being mean.....I really don't want anyone else to have the problems I have had and really wouldn't advise anyone to go through the process as it's fraught with issues, bad explanations and lacking important information.
Some files are incorrect for our device and some listed procedures for the other devices do not work on our E5.
BTW-my device is an E5 play XT1920-15 PETTYL SIM unlocked purchased from Argos.
Here's a list of the issue I found, it might be different for someone else as two people are saying they successfully rooted their PETTYL, and I couldn't.......
1. I had no issues unlocking the bootloader.
2. There are two versions of TWRP posted on XDA for PETTYL, but neither worked for me.
I used the James version.
3. I could not root my device.
Magisk installed but I could not get v17.3 or v17.2 to flash.
V17.1 did flash but magisk manager showed device not rooted and magisk not installed.
4. Flashing any GSI (Oreo or Pie) causes problems to the system sounds, ringtones, notification tones and music which is totally distorted and very poor quality.
The camera has very poor quality as well.
5. Lineage OS 15.1 is the GO version, you also should flash lineage before flashing other GSIs as you can't flash most GSis over stock.
6. You can use the full Google apps on a couple of android 9 gsis which makes your device a normal android, not an android Go device, but I would recommend not to bother with Android 9.0 GSis for this device as they are very buggy and very slow, and they use three times more battery than android 8.1 Go.
Also, live wallpaper and notification access still don't work on android 9.
Just remember as well the US E5 is much more powerful than our E5, and I assume thats why android 9 runs so crap on our E5.
7. You have a very complicated process to get your Google account working on any GSI, if you do it wrong, you will not be able to use your Google account at all and will get spammed with never ending notification from Google of using an "uncertified device"
8. If you run into problems and decided to return to stock, you cannot download the "retail_GB" stock firmware (SIM unlocked) for PETTYL unless you pay for it....the EE and Tesco SIM locked firmware is free to download, but neither work on the SIM unlocked version if you use non EE or non Tesco SIM cards.
9. Someone has posted a twrp back up of rooted stick for PETTYL.
It did not boot on my device and just kept boot looping.
That could have been a twrp issue and nothing to do with the shared back up - I couldn't get back into a gsi or stock to test it.
My post is warning to other PETTYL users- with my own experience.
What you choose to do is up to you but I really would not bother tampering with it, leave it be.
Stock android Go 8.1 is way better than anything else that's currently available for PETTYL right now, every gsi I tried had an issue of some description that affected performance so badly they were practically unusable.
Even though I'm back on stock now I still have sound issues, and many graphic glitches that makes my screen flash and glitch out randomly.
I'm sorry it's such a long reply, I wanted to give you as much information as possible so you have some idea of what's involved for our device., And let's just hope the situation for our device will get better soon.

Thanks for your detailed reply, I only asked if this was correct as I was aware of the differences between models etc.
I wouldnt say im new to rooting cfw etc, I have been flashing phones since 2002 lol.
But I dont want to brick this device as its currently my only phone, so I will wait and see if the situation improves in the future.
Its not a bad phone as it is you get quite a lot of phone for £65 nowadays.
Oh and im using simlocked tesco model so free to download, I find it stupid that you have to pay for stock firmware its beyond belief

mac_d4di said:
Thanks for your detailed reply, I only asked if this was correct as I was aware of the differences between models etc.
I wouldnt say im new to rooting cfw etc, I have been flashing phones since 2002 lol.
But I dont want to brick this device as its currently my only phone, so I will wait and see if the situation improves in the future.
Its not a bad phone as it is you get quite a lot of phone for £65 nowadays.
Oh and im using simlocked tesco model so free to download, I find it stupid that you have to pay for stock firmware its beyond belief
Click to expand...
Click to collapse
Just like you, I've been rooting and flashing phones since like forever, and this device is the first I've ever had issues with.
It's entirety possible that as I'm a "noob" to flashing system images and fastboot flashing as apposed to flashing "ROMs" I may have messed up the procedures or made mistakes.
But not to be outdone, I have just before typing this reply tried again to root my E5 and flash a GSI, and again the process failed for me.
I could not boot into lineage OS 15.1 due to a "decryption error" and also couldn't get twrp to flash anything.
I've read now my issues are down to the DM Verity kernel which seems to be causing a lot of confusion amongst users and It now seems the process to remove forced encryption is what's causing all my issues.
I don't understand the process if I'm honest (it's an age thing lol) and worse, there is a lot of conflicting information, as a few people are saying the DM Verity process isn't necessary!!!
So unfortunately I've given up completely for now and stand by my original advice.
It's best to leave this particular device well alone until we have a proper procedure and tutorial in place for our own devices rather than trying to follow procedures for the US version.
I'm jealous though you only paid £65, as I paid £79.99, but I still think this Moto E is better than the Nokia 3 it replaced.

If any one can send me any issues they have with pettyl xt1920-15 rooting/twrp/etc I will try to test everything I can and see what works don't expect anything till January cause got college till the 23 and no time now

plscotland said:
If any one can send me any issues they have with pettyl xt1920-15 rooting/twrp/etc I will try to test everything I can and see what works don't expect anything till January cause got college till the 23 and no time now
Click to expand...
Click to collapse
That's very generous of you.
Like you, I don't get much time (due to work) but I have two weeks off from 21/12 and can supply as much information as you want.
I would like root if it's possible.

If some can check this twrp in fast boot by booting it and tell me dose it work on thier phone i be thankfull https://github.com/TwrpBuilderTests...s/tag/TWRP-3.2.3-TwrpBuilder-2018-10-28_04-33

plscotland said:
If some can check this twrp in fast boot by booting it and tell me dose it work on thier phone i be thankfull https://github.com/TwrpBuilderTests...s/tag/TWRP-3.2.3-TwrpBuilder-2018-10-28_04-33
Click to expand...
Click to collapse
I have a "working" 3.2.3 version for PETTYL but I'm not sure it's the version you linked
The one I have "works" in that it boots to TWRP fine from fastboot but obviously it doesn't flash.
I can't flash GSIs through that version, where they do flash no problems through fastboot......
Finally, I can flash magisk through that as even though magisk flashes successfully, magisk manager shows magisk is not installed and asks to flash it again.

@plscotland
TWRP - won't flash to recovery partition.
Cannot mount vendor to flash Fstab
Magisk flashes but magisk manager shows not installed.
I tried the twrp I sent you and the James version.
Lineage - I can successfully flash and boot lineage over stock (Phhusson version) but I have issues with "device not certified by Google" and get spammed by constant notification from Google
Cannot use for daily driver due to no nav bar orfind any settings to enable nav bar.
Descendants 1.0.5 - I have successfully flashed and booted this "rom" and used it but the sound from system ringtones and notification tones is awful and distorted
Lots of graphical glitches and system UI has stopped errors
Pixel experience - cannot flash - error whilst flashing that system IMG is bigger than target.
If I wipe data, it just bootloops and won't go past splash screen.
Resurrection remix - cannot boot
Bootleggers 3.0 - cannot boot
Hope some of this information helps you.
XT1920 - 15 retail GB firmware (SIM unlocked) stock android 8.1 go currently

bubba1601 said:
@plscotland
TWRP - won't flash to recovery partition.
Cannot mount vendor to flash Fstab
Magisk flashes but magisk manager shows not installed.
I tried the twrp I sent you and the James version.
Lineage - I can successfully flash and boot lineage over stock (Phhusson version) but I have issues with "device not certified by Google" and get spammed by constant notification from Google
Cannot use for daily driver due to no nav bar orfind any settings to enable nav bar.
Descendants 1.0.5 - I have successfully flashed and booted this "rom" and used it but the sound from system ringtones and notification tones is awful and distorted
Lots of graphical glitches and system UI has stopped errors
Pixel experience - cannot flash - error whilst flashing that system IMG is bigger than target.
If I wipe data, it just bootloops and won't go past splash screen.
Resurrection remix - cannot boot
Bootleggers 3.0 - cannot boot
Hope some of this information helps you.
XT1920 - 15 retail GB firmware (SIM unlocked) stock android 8.1 go currently
Click to expand...
Click to collapse
Thanks I check and send u how to boot resurrection remix later cause there are extra steps for it to work and fstab also has to be done in another way once IM off work I do a guide for it /Info helped a lot

plscotland said:
Thanks I check and send u how to boot resurrection remix later cause there are extra steps for it to work and fstab also has to be done in another way once IM off work I do a guide for it /Info helped a lot
Click to expand...
Click to collapse
Great, thanks

Qestion do u just want working magisek root on pettyl ?
There 2 ways
One download magisek manager
Get a twrp buckup of your boot image
Go to magisek manager choose patch boot image and choose your twrp buckup boot image (turn off compression of buckup when taking it ) after it finishes go find the patched boot image it should be in downloads or magisek folder can't remember then go to twrp and flash the patched boot image
/
Second way is to add the fstab or whater its called skip the adb mount part and only do the adb push part (look in tread for exact) https://forum.xda-developers.com/moto-e5/development/recovery-twrp-moto-e-5-play-james-t3796323 then flash the magisek 18.0 tell me did it work after. here the twrp that should work for every ones pettyl [ https://drive.google.com/file/d/1VsZRGkBujHay02a1M14eJM87H_RHFE9J/view?usp=drivesdk ] !Im not responsible if u brick your phone
!!try to boot twrp before u flash do fastboot boot (twrp image just drag the file to cmd to avoid path erors )

plscotland said:
Qestion do u just want working magisek root on pettyl ?
There 2 ways
One download magisek manager
Get a twrp buckup of your boot image
Go to magisek manager choose patch boot image and choose your twrp buckup boot image (turn off compression of buckup when taking it ) after it finishes go find the patched boot image it should be in downloads or magisek folder can't remember then go to twrp and flash the patched boot image
/
Second way is to add the fstab or whater its called skip the adb mount part and only do the adb push part (look in tread for exact) https://forum.xda-developers.com/moto-e5/development/recovery-twrp-moto-e-5-play-james-t3796323 then flash the magisek 18.0 tell me did it work after. here the twrp that should work for every ones pettyl [ https://drive.google.com/file/d/1VsZRGkBujHay02a1M14eJM87H_RHFE9J/view?usp=drivesdk ] !Im not responsible if u brick your phone
!!try to boot twrp before u flash do fastboot boot (twrp image just drag the file to cmd to avoid path erors )
Click to expand...
Click to collapse
Yeah, Ive been skipping the mount vendor and pushing Fstab via ADB whilst in twrp.
I'll give this twrp a whirl later this evening when my kids laptop is available

I've bricked my E5 and cannot get past "decryption unsuccessful."
Stock/los15/any other gsi I tried.
Reflashed stick but getting errors flashing gpt.partition.
Everything else then shows errors after each command.
Twrp- i followed your 1st step with a magisk altered boot image.
Tried second step and that failed.
I had to combine both steps into one and twrp then booted and flashed successfully to the recovery partition.
Adb pushed fstab before flashing twrp to recovery but once rebooted to stock I got "decryption unsuccessful" error and got into a bootloop.
Reflashed stock then los15.1 but same again.
Reflashed stock but gpt partition and system sparsechunk.2, 3 and 4 give errors.
Cannot flash stock or gsi currently or reboot to recovery, just keeps going back to fastboot.

bubba1601 said:
I've bricked my E5 and cannot get past "decryption unsuccessful."
Stock/los15/any other gsi I tried.
Reflashed stick but getting errors flashing gpt.partition.
Everything else then shows errors after each command.
Twrp- i followed your 1st step with a magisk altered boot image.
Tried second step and that failed.
I had to combine both steps into one and twrp then booted and flashed successfully to the recovery partition.
Adb pushed fstab before flashing twrp to recovery but once rebooted to stock I got "decryption unsuccessful" error and got into a bootloop.
Reflashed stock then los15.1 but same again.
Reflashed stock but gpt partition and system sparsechunk.2, 3 and 4 give errors.
Cannot flash stock or gsi currently or reboot to recovery, just keeps going back to fastboot.
Click to expand...
Click to collapse
in fastboot enter (use cmd powershell gives erorrs) fastboot -w
And then try rebooting it can take a while and tell me did it fix the problem

Recuperación TWRP 3.3.1-0-Pettyl
Hola buen día soy de Guadalajara México
A mí sí me funcionó está recuperación para rotear con magisk e instalar un mood de píxel.
La instalación de TWRP3.3.1-0-PETTYL Lo hice gracias a la aplicación Root essentials en el apartado flasher flasheando la imagen de la recuperación y ya dentro de la recuperación hice una copia de seguridad e instale magisk
Mi dispositivo es el Moto e5 play go pettyl XT1920-18

Heeeeeelp
(First Sorry for my bad english I'm a Brazilian boy with 17 years old only lmfao)Guys, I have only this little piece of s**** as my phone
#1 and this is not useable, it stop The apps constantely and freezes The system on simple apps (like play music and YouTube)... So I want to leave this cellphone in The trash can and walk away, but I cant make this because i have only this "bombphone"... Anywere can make an downgrade to Android 6.1 or 7.1 to this phone? Seriously I cant live with this phone in this situation. thanks and good night from Brazil

João klebão (supahjohn64) said:
(First Sorry for my bad english I'm a Brazilian boy with 17 years old only lmfao)Guys, I have only this little piece of s**** as my phone
#1 and this is not useable, it stop The apps constantely and freezes The system on simple apps (like play music and YouTube)... So I want to leave this cellphone in The trash can and walk away, but I cant make this because i have only this "bombphone"... Anywere can make an downgrade to Android 6.1 or 7.1 to this phone? Seriously I cant live with this phone in this situation. thanks and good night from Brazil
Click to expand...
Click to collapse
Unfortunately you can't downgrade android versions to 6 or 7, there's no system image / ROM on a lower android version for that device - but what you can do it's flash another GSi (ROM) to give you some usage back.
I also had the the XT1920 pettyl and android go is just awful, so I flashed several different roms to try.
The ones I got to work are
PHHussons lineage 15 (android Oreo)
ASOP 9 (android pie)
Pixel experience (pie)
Out of those lineage was the most stable.
You must remember pettyl only has 1gb ram, and does struggle with android 9 pie - but it does work without too many issues.
You got to learn a whole new process of unlocking the bootloader, flashing a custom recovery, disabling forced encryption and flashing a new ROM.
There are plenty of posts about roms for the E5 play in the threads here, I suggest you take a long read and don't try anything until you feel confident enough to begin because the process to flash roms on pettyl isn't very easy and is quite complex and complicated for a new inexperienced user.
It's quite easy to try that and completely mess up your device so it's unusable.
So, you MUST proceed with extreme caution, don't rush into anything without reading everything ten times, having a coffee and then reading it again another ten times.
Many users have tried to rush this process and then come here crying their phones don't work anymore - this happens because they've tried to rush the process, missed out steps and not read instructions properly........
Not being mean, but it happens all the time.
Edit
If you don't feel confident enough to flash a ROM (and no one will blame you if you don't) unfortunately all you can do is change the way you use your device.
I never noticed any music or you tube video freezing on my pettyl but how I used my device and how you use yours are probably very different.
You can't put lots of apps on android go devices, it doesn't like lots of apps.
You can disable most of the system / Google apps like playstore, Google play music and YouTube and install open source alternatives.
(For instance one plus music, you tube vanced and aurora store to name just three - just Google "disable system apps" or "replace Google apps")
I also tried a couple of launchers, and Librechair go edition or the android Go customised pixel launcher does make quite a significant difference to performance, depending on how much system stuff you disable and how many replacement apps you install.
Edit
I don't have my pettyl any longer so unfortunately that's the only help and advice I can offer you at this time.
Sorry.

bubba1601 said:
Unfortunately you can't downgrade android versions to 6 or 7, there's no system image / ROM on a lower android version for that device - but what you can do it's flash another GSi (ROM) to give you some usage back.
I also had the the XT1920 pettyl and android go is just awful, so I flashed several different roms to try.
The ones I got to work are
PHHussons lineage 15 (android Oreo)
ASOP 9 (android pie)
Pixel experience (pie)
Out of those lineage was the most stable.
You must remember pettyl only has 1gb ram, and does struggle with android 9 pie - but it does work without too many issues.
You got to learn a whole new process of unlocking the bootloader, flashing a custom recovery, disabling forced encryption and flashing a new ROM.
There are plenty of posts about roms for the E5 play in the threads here, I suggest you take a long read and don't try anything until you feel confident enough to begin because the process to flash roms on pettyl isn't very easy and is quite complex and complicated for a new inexperienced user.
It's quite easy to try that and completely mess up your device so it's unusable.
So, you MUST proceed with extreme caution, don't rush into anything without reading everything ten times, having a coffee and then reading it again another ten times.
Many users have tried to rush this process and then come here crying their phones don't work anymore - this happens because they've tried to rush the process, missed out steps and not read instructions properly........
Not being mean, but it happens all the time.
Edit
If you don't feel confident enough to flash a ROM (and no one will blame you if you don't) unfortunately all you can do is change the way you use your device.
I never noticed any music or you tube video freezing on my pettyl but how I used my device and how you use yours are probably very different.
You can't put lots of apps on android go devices, it doesn't like lots of apps.
You can disable most of the system / Google apps like playstore, Google play music and YouTube and install open source alternatives.
(For instance one plus music, you tube vanced and aurora store to name just three - just Google "disable system apps" or "replace Google apps")
I also tried a couple of launchers, and Librechair go edition or the android Go customised pixel launcher does make quite a significant difference to performance, depending on how much system stuff you disable and how many replacement apps you install.
Edit
I don't have my pettyl any longer so unfortunately that's the only help and advice I can offer you at this time.
Sorry.
Click to expand...
Click to collapse
thanks for the tips friend, i flashed some gases from android 9.0 and noticed that 90% of the performance improved which allowed me to played a little free fire lmfao so that unfortunately out of nowhere i faced some crashes and received the message from the user interface you are not responding, right now I am downloading the rom ressurrection remix oreo to see if it will work ... do you happen to know how to build a modified kernel? I have plans to make one for my cell phone but I don't know where to start. obrigado pelas dicas!!!! boa noite do brasil:good:
---------- Post added at 11:14 PM ---------- Previous post was at 11:09 PM ----------
bubba1601 said:
Unfortunately you can't downgrade android versions to 6 or 7, there's no system image / ROM on a lower android version for that device - but what you can do it's flash another GSi (ROM) to give you some usage back.
I also had the the XT1920 pettyl and android go is just awful, so I flashed several different roms to try.
The ones I got to work are
PHHussons lineage 15 (android Oreo)
ASOP 9 (android pie)
Pixel experience (pie)
Out of those lineage was the most stable.
You must remember pettyl only has 1gb ram, and does struggle with android 9 pie - but it does work without too many issues.
You got to learn a whole new process of unlocking the bootloader, flashing a custom recovery, disabling forced encryption and flashing a new ROM.
There are plenty of posts about roms for the E5 play in the threads here, I suggest you take a long read and don't try anything until you feel confident enough to begin because the process to flash roms on pettyl isn't very easy and is quite complex and complicated for a new inexperienced user.
It's quite easy to try that and completely mess up your device so it's unusable.
So, you MUST proceed with extreme caution, don't rush into anything without reading everything ten times, having a coffee and then reading it again another ten times.
Many users have tried to rush this process and then come here crying their phones don't work anymore - this happens because they've tried to rush the process, missed out steps and not read instructions properly........
Not being mean, but it happens all the time.
Edit
If you don't feel confident enough to flash a ROM (and no one will blame you if you don't) unfortunately all you can do is change the way you use your device.
I never noticed any music or you tube video freezing on my pettyl but how I used my device and how you use yours are probably very different.
You can't put lots of apps on android go devices, it doesn't like lots of apps.
You can disable most of the system / Google apps like playstore, Google play music and YouTube and install open source alternatives.
(For instance one plus music, you tube vanced and aurora store to name just three - just Google "disable system apps" or "replace Google apps")
I also tried a couple of launchers, and Librechair go edition or the android Go customised pixel launcher does make quite a significant difference to performance, depending on how much system stuff you disable and how many replacement apps you install.
Edit
I don't have my pettyl any longer so unfortunately that's the only help and advice I can offer you at this time.
Sorry.
Click to expand...
Click to collapse
thanks for the tips friend,
I already work in some way with custom roms since 2013 when I had my lg l1 2 lmfao... i flashed some gases from android 9.0 and noticed that 90% of the performance improved which allowed me to played a little free fire lmfao so that unfortunately out of nowhere i faced some crashes and received the message from the user interface you are not responding, right now I am downloading the rom ressurrection remix oreo to see if it will work ... do you happen to know how to build a modified kernel? I have plans to make one for my cell phone but I don't know where to start. obrigado pelas dicas!!!! boa noite do brasil

help with guide to install rom

Hello all,
I bought recently a used mi8 for replacing my oldie mi5.
I have reading several posts that are related with flashing the roms, and several talk about the encryption storage.
I know that xiaomi encrypts the storage and that I need to format, but I get confused with the necessity of having to flash or not the dm-verity pack.
So what I know so far and please correct me if I'm wrong:
First boot loader unlock no problem
Second install Twrp, can I use the latest official or search for a specific package????
Third in the Twrp format everything
Fourth after format I remember something about keeping system read only or not, what do I need to do???
Fifth grab an asop rom and flash it
Sixth if I want root, use the Magisk, normally or do I need to pay attention to anything else.
Sorry, for so many things, but I read plenty, before asking

robrodrigues said:
Hello all,
I bought recently a used mi8 for replacing my oldie mi5.
I have reading several posts that are related with flashing the roms, and several talk about the encryption storage.
I know that xiaomi encrypts the storage and that I need to format, but I get confused with the necessity of having to flash or not the dm-verity pack.
So what I know so far and please correct me if I'm wrong:
First boot loader unlock no problem
Second install Twrp, can I use the latest official or search for a specific package????
Third in the Twrp format everything
Fourth after format I remember something about keeping system read only or not, what do I need to do???
Fifth grab an asop rom and flash it
Sixth if I want root, use the Magisk, normally or do I need to pay attention to anything else.
Sorry, for so many things, but I read plenty, before asking
Click to expand...
Click to collapse
Well come to Mi8 mate.
1. You need to unlock bootloader
2. Install official or IMO use Orangefox recovery which is based on latest twrp with some themes and extras.
3. You are right
4. After installing twrp or similar you need to slide on first run if you want to enable flashing etc.
5. Choose any rom you want
6. Yes Magisk is your only option, if you need root.
However if your device is unencrypted than you don't need to install dmverity. I am also used many AOSP roms on my unencrypted device and faced zero issues.
[emoji3590] from [emoji1191]

ammaralidj said:
Well come to Mi8 mate.
1. You need to unlock bootloader
2. Install official or IMO use Orangefox recovery which is based on latest twrp with some themes and extras.
3. You are right
4. After installing twrp or similar you need to slide on first run if you want to enable flashing etc.
5. Choose any rom you want
6. Yes Magisk is your only option, if you need root.
However if your device is unencrypted than you don't need to install dmverity. I am also used many AOSP roms on my unencrypted device and faced zero issues.
[emoji3590] from [emoji1191]
Click to expand...
Click to collapse
Hello all
Well I repeated the same steps once again and voila it worked.
Bootloader unlocked successfully and my Mi8 is with Asop pixel experience.
Thanks once again

Enabling encryption on Pixel Experience ROM

Hi everyone! I'm very much a newbie when it comes to custom ROM's, so apologies if this is a a dumb question...
I just managed to install the latest Pixel Experience ROM on my K20 Pro, from the stock Chinese ROM. Before installing it, I had to flash DFE. So, from my understanding, it is now blocking me from re-enabling encryption. I need to have encryption enabled for work email access, so is it possible to enable it somehow? I'm not worried about losing any data on the phone, but I would certainly prefer to use Pixel Experience than to go back to MIUI.
Per another forum thread I found, one member suggested to "reflash your vendor/firmware." Is that accurate? If so, how do I do that, and what would be the result?

shleepy said:
Hi everyone! I'm very much a newbie when it comes to custom ROM's, so apologies if this is a a dumb question...
I just managed to install the latest Pixel Experience ROM on my K20 Pro, from the stock Chinese ROM. Before installing it, I had to flash DFE. So, from my understanding, it is now blocking me from re-enabling encryption. I need to have encryption enabled for work email access, so is it possible to enable it somehow? I'm not worried about losing any data on the phone, but I would certainly prefer to use Pixel Experience than to go back to MIUI.
Per another forum thread I found, one member suggested to "reflash your vendor/firmware." Is that accurate? If so, how do I do that, and what would be the result?
Click to expand...
Click to collapse
Why did you have to flash DFE? It's only used if you change roms frequently to avoid encryption.

I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.

shleepy said:
I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.
Click to expand...
Click to collapse
Your best bet is to go back to stock and start again. I believe installing an official fastboot ROM will restore encryption. Your previous issues were probably caused by not formatting data when flashing PE.
There is no requirement to disable encryption on this phone, ignore any guide that adds that as a step. You should only disable encryption if it's your personal preference to disable it.
Follow this guide.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the PE ROM, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.

shleepy said:
I initially had trouble successfully installing the ROM. So, I started from scratch and followed some thorough instructions I found online, which included the DFE step. (I noticed that TWRP was previously showing an encryption error at the start of ROM installation; but I guess it could just be a "warning" more than an error. I suspect my problem before was probably more related to not having the latest MIUI update installed, or something like that.)
I don't plan on frequently swapping ROM's.
Click to expand...
Click to collapse
Do yourself a favour and follow the instructions in the description of the rom, not some instructions you found online telling you to do some unnecessary stuff. Going to and from miui, format data, everything else just wipe cache, system and data to avoid issues, even then you can get away with dirty flashing aosp based roms 99% of the time imo.
As for the miui update, I have no idea how you came to that conclusion but just no, that's not how it works at all. Vendor firmware and the rom is all you need for pixel experience at the bare minimum.

You can try flashing the rom again, but don't flash the DFE.