Database Develop

Liquid Black 3.2.1 SD Card bug?

Hey there
first off hats off to firman and the guys who released the Liquid Black Rom V3.2.1. never had i found a smoother and faster rom for my device (clocked 8455 on AnTuTu with a Notecore standard kernel).
That being said, today i woke up and realized that the external card isnt showing up on the device once its booted. i can access it via the recovery and it also shows up when i plug my unit into the USB slot. This was working fine last night. what could be done? i have done the basic steps of flashing the OS over, wiped cache, factory restore etc etc. i REALLY do not wanna move from this ROM and if anyone can point me in the direction i need to be looking at would be really helpful.

http://forum.xda-developers.com/showthread.php?t=1373728

Eluviet said:
Hey there
first off hats off to firman and the guys who released the Liquid Black Rom V3.2.1. never had i found a smoother and faster rom for my device (clocked 8455 on AnTuTu with a Notecore standard kernel).
That being said, today i woke up and realized that the external card isnt showing up on the device once its booted. i can access it via the recovery and it also shows up when i plug my unit into the USB slot. This was working fine last night. what could be done? i have done the basic steps of flashing the OS over, wiped cache, factory restore etc etc. i REALLY do not wanna move from this ROM and if anyone can point me in the direction i need to be looking at would be really helpful.
Click to expand...
Click to collapse
Ext sdcard wont work in liquid black with netcore kernel..you'll need to flash back to franco v4

Thread Moved​
Please post questions in the Q&A section.​

thanks ganjaman.
MrDSL actually, it works now. I had to swap the mounting point in the vold.ftab file and voila. my 32GB is back in action.
Ps am on the new Hydracore atm. just flashed and redid the vold.ftab again

Eluviet said:
thanks ganjaman.
MrDSL actually, it works now. I had to swap the mounting point in the vold.ftab file and voila. my 32GB is back in action.
Ps am on the new Hydracore atm. just flashed and redid the vold.ftab again
Click to expand...
Click to collapse
Can you share with me these vold.ftab edits? Thanks

MrDSL said:
Can you share with me these vold.ftab edits? Thanks
Click to expand...
Click to collapse
i had to edit the vold.ftab files to read as the attached file. i am on the newest hydra kernel and the bug exists.
The original vold.ftab reads the 1st line as SDCARD 11 and the 2nd as EMMC. swapping them around gets me access to everything on my SD card again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Eluviet said:
i had to edit the vold.ftab files to read as the attached file. i am on the newest hydra kernel and the bug exists.
The original vold.ftab reads the 1st line as SDCARD 11 and the 2nd as EMMC. swapping them around gets me access to everything on my SD card again.
Click to expand...
Click to collapse
funny thing is when i flashed the standard version of the Notecore and the associated kernels on Liquid Black V 3.2.1 the card works fine without having to edit the vold.ftab file. Weird?

[Q] Myth 3 Wanted to go back to my default partition of SD card

To install Myth3, i created a ex partition in SD card through Clockwork mod. Now i wanted to flash another rom. My SD card is 8 GB and now if i connect to the system it shows 6.85 GB available. I want to delete the partition created in the SD Card. How to do it?
Thanks in advance

Hi shaneadams!
You could use MiniTool Partition Home Wizard from this link (by eraser0) :
http://forum.xda-developers.com/showthread.php?t=1476121
Go ahead and you'll find it.
Good luck
Sent from my GT-S5830

You can use Computer Management section if You run Windows OS.
You can delete partitions there. I always use it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

SzalonyKronikarz said:
You can use Computer Management section if You run Windows OS.
You can delete partitions there. I always use it.
...
Click to expand...
Click to collapse
Hi SzalonyKronicarz!
If the SD partition is ext2/ext3/ext4 Windows OS will not see it.
Though, Windows OS computer management section is useful for FAT/FAT32/NTFS partitions.
Good luck.
Sent from my GT-S5830

I can't agree with You.
It works just fine for deleting partitions.
Windows may not use this type of partitions but can see and delete.
Actually I don't have any english version of Windows but I'd like to show You that I am right:
You can see, that partitons exist.
It says "Zdrowy,nieznana partycja" - english: healthy - unknown partition.
You can also see "Usuń partycję" - english: delete partition.
Both partitions were created under CWM Recovery.
Screenshot is here http://zapodaj.net/images/908ea15d23390.jpg

SzalonyKronikarz said:
I can't agree with You.
It works just fine for deleting partitions.
Windows may not use this type of partitions but can see and delete.
Actually I don't have any english version of Windows but I'd like to show You that I am right:
You can see, that partitons exist.
It says "Zdrowy,nieznana partycja" - english: healthy - unknown partition.
You can also see "Usuń partycję" - english: delete partition.
Both partitions were created under CWM Recovery.
Screenshot is here http://zapodaj.net/images/908ea15d23390.jpg
Click to expand...
Click to collapse
Hi SzalonyKronikarz!
My apologies, you're right.:thumbup: Windows OS can see and delete this type of partitions, and, though, your method is alright.
Thanks and good luck.
Sent from my GT-S5830

BajoPrimate said:
Hi shaneadams!
You could use MiniTool Partition Home Wizard from this link (by eraser0) :
http://forum.xda-developers.com/showthread.php?t=1476121
Go ahead and you'll find it.
Good luck
Sent from my GT-S5830
Click to expand...
Click to collapse
Thanks dude. It worked fine . Thanks for the support .
Sent from my Samsung GT-S5830 using Tapatalk 2

shaneadams said:
Thanks dude. It worked fine . Thanks for the support .
Sent from my Samsung GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Hi shaneadams!
You're welcome. Thanks to erarser0. I'm so glad reading your good news.
Good luck.

HELP! on swapper 2 and sd card partioning

Hi guys, I need an answer right away since im deciding right now what to do, im using gingerdx vO31b shakira with alfsv9 kernel using stock 2gigz sd card .. i was just wondering, do i really need to partition my sd card before i can use swapper 2? or i could just use swapper 2 without partitioning my sd? im thankful! :laugh:

gnash04 said:
Hi guys, I need an answer right away since im deciding right now what to do, im using gingerdx vO31b shakira with alfsv9 kernel using stock 2gigz sd card .. i was just wondering, do i really need to partition my sd card before i can use swapper 2? or i could just use swapper 2 without partitioning my sd? im thankful! :laugh:
Click to expand...
Click to collapse
and it seems that gingerdx has a native a2sd.. im still confused,
if i decided not to partion my sd will swap work? im still reading some guides but its all diff from the other..:crying:
take a look at this image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

gnash04 said:
and it seems that gingerdx has a native a2sd.. im still confused,
if i decided not to partion my sd will swap work? im still reading some guides but its all diff from the other..:crying:
take a look at this image
Click to expand...
Click to collapse
i haven't used swapper, but if you're going to use a swap file, you don't need a swap partition.

The message shows ext partition is supported & you don't have ext partition ...
About swap, if you're noob use other apps to create swap file(instead of partition)(apps like ram expander {not sure about the name}
Creating swap file with Swapper needs a lot of hard work, so forget it
#set swappiness to 40 or 60 for gaming otherwise 10 - 20 is enough
Sent from my X8 using Tapatalk 2

jay-z-s said:
The message shows ext partition is supported & you don't have ext partition ...
About swap, if you're noob use other apps to create swap file(instead of partition)(apps like ram expander {not sure about the name}
Creating swap file with Swapper needs a lot of hard work, so forget it
#set swappiness to 40 or 60 for gaming otherwise 10 - 20 is enough
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
thanks for the info, im already using swapper 2 and its working without the partition.. anyways what is the best app for swapping?

gnash04 said:
thanks for the info, im already using swapper 2 and its working without the partition.. anyways what is the best app for swapping?
Click to expand...
Click to collapse
All apps are same, swap quality depends on SD card...
Sent from my xperia katana

[SOLVED] [Q] Teclast x98 Air II - Moving apps with link2sd on mireks rom v5.0

Hello There together,
i cant manage to move apps with link2sd on my teclast x98 air 2 (HG8N). I have windows 10 and mireks rom v5.0 running on it.
I have an 64gb SD card with 2 partitions on it. First one primary fat32 and second one primary ext4 like at the faq on link2sd pro hp.
The mount script works properly. But if i try to move apps to my sd card i got every time the message pakage invalid.
How can i mange to get my apps on my sd card? I need it, because my teclast have only 32gb and with dual boot and windows 10 on it, i havent enough space for much apps on android.
Any suggestions?
Thank you!

Crazy_Oni said:
Hello There together,
i cant manage to move apps with link2sd on my teclast x98 air 2 (HG8N). I have windows 10 and mireks rom v5.0 running on it.
I have an 64gb SD card with 2 partitions on it. First one primary fat32 and second one primary ext4 like at the faq on link2sd pro hp.
The mount script works properly. But if i try to move apps to my sd card i got every time the message pakage invalid.
How can i mange to get my apps on my sd card? I need it, because my teclast have only 32gb and with dual boot and windows 10 on it, i havent enough space for much apps on android.
Any suggestions?
Thank you!
Click to expand...
Click to collapse
Move app to SD Card doesn't work on our device, but linking does.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If it does not work for you, then I don't know what could be the issue as for me it works alright (albeit a bit slow when booting the device).

Crazy_Oni said:
Hello There together,
i cant manage to move apps with link2sd on my teclast x98 air 2 (HG8N). I have windows 10 and mireks rom v5.0 running on it.
I have an 64gb SD card with 2 partitions on it. First one primary fat32 and second one primary ext4 like at the faq on link2sd pro hp.
The mount script works properly. But if i try to move apps to my sd card i got every time the message pakage invalid.
How can i mange to get my apps on my sd card? I need it, because my teclast have only 32gb and with dual boot and windows 10 on it, i havent enough space for much apps on android.
Any suggestions?
Thank you!
Click to expand...
Click to collapse
Crazy_Oni,
Let me ask a question or 3.
Can you see the SDcard mount folders on your device ?
What paths are they showing up under ?
Can you create files within these folders from Android ?
I personally have not found it necessary to create 2 folders on my 64GB MicroSD.
I am using 1 64GB NTFS partition and I am successfully relocating (moving and accessing) folders to the MicroSD from both Windows and Android, without using any apps to do it.

It looks like this.
I remounted it with link2sd a few times but it didn't work. Viebahn can't link apps to it.
Sent from my X98 Air II using XDA Free mobile app

Crazy_Oni said:
It looks like this.
I remounted it with link2sd a few times but it didn't work. Viebahn can't link apps to it.
Sent from my X98 Air II using XDA Free mobile app
Click to expand...
Click to collapse
That's too small to read
---------- Post added at 01:23 PM ---------- Previous post was at 01:12 PM ----------
tecknight said:
That's too small to read
Click to expand...
Click to collapse
Try this app instead:
https://play.google.com/store/apps/details?id=in.co.pricealert.apps2sd&hl=en

tecknight said:
That's too small to read
---------- Post added at 01:23 PM ---------- Previous post was at 01:12 PM ----------
Try this app instead:
https://play.google.com/store/apps/details?id=in.co.pricealert.apps2sd&hl=en
Click to expand...
Click to collapse
Really? did you try to see the full image? i can clearly see the paths.
I´ll try your suggested app. Thx for it tecknight!
Edit:
That was the solution for me. Thank you tecknight!

i have the same problem.but i need somebody to explain it to me very slowly( like what buttons i press to do all that) thanks

Does anybody have this problem with camera

Sometimes my pictures are broken ,does anybody have this pronlem,ill try to chenge defaul memory to memory card and 1 of 10 picture arre broken
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Strange, never seen this issue before. Tried clearing the camera's cache and data ?

dule2303 said:
Sometimes my pictures are broken ,does anybody have this pronlem,ill try to chenge defaul memory to memory card and 1 of 10 picture arre broken View attachment 4743817
Click to expand...
Click to collapse
Is it a problem with how the gallery app is rendering the image or an issue with the file itself being corrupt? Have you tried opening it with another app or device?
Sent from my SM-G975U1 using Tapatalk

Yes, i try with piktures and quickpic ,same thing

dule2303 said:
Yes, i try with piktures and quickpic ,same thing
Click to expand...
Click to collapse
Happend to me too. Let me guess, you save your pictures automatically on the nano sd?
Because that is how it corrupted mine. Putting internal storage as prefered save Location will solve your problem. The Pictures will stay corrupt though.

I've had this on an Samsung once... There was the SD card defective..

Definitely memory card faulty

shollywood said:
Definitely memory card faulty
Click to expand...
Click to collapse
I think there was another thread on this and I agree it is a bad nano memory.
Sent from my SM-G975U1 using Tapatalk

Ok,thanks
Ill try to format

dule2303 said:
Ok,thanks
Ill try to format
Click to expand...
Click to collapse
This will not fix. It didn't fix for me. Still got this problem saving into card after format

Ok,but i update firmware from sd card,all my files on sd card are ok also i restored backup from sd card without a problem

dule2303 said:
Ok,but i update firmware from sd card,all my files on sd card are ok also i restored backup from sd card without a problem
Click to expand...
Click to collapse
It might be phone needs update. Cause I never had problems until using this phone with this sd card

Same problem with just bought 256GB card. Photos and videos getting randomly corrupted. I really hope it's a software issue and will be solved with upcoming OTA. What a pity!

I have 6/128GB version and 128GB nanoSD and now I take a picture and nothing is broken.

sukr said:
I have 6/128GB version and 128GB nanoSD and now I take a picture and nothing is broken.
Click to expand...
Click to collapse
May I ask if you saving pics taken to your nanoSD card?

Seems like problem solved in 140/153 update for me.

How were you able to solve the problem? Was it a faulty nano memory card?
Was it a faulty nano memory card eventually?