Related
Hey Guys,
I have been using my phone for the past 1 year. My Brother just Wiped Out My Mobile Phone completely though the twrp recovery. Now I am not able to transfer file from or through it. If I am able to do it. I can easily Transfer Rom File onto it and install it.
So Please Say A Way To Transfer File Into My Mobile Please which has no OS And is not being detected in my windows 10 PC.
You can use usb OTG from TWRP and change storage. Also if you connect your phone to PC with usb cable from recovery mode. Your phone shall be detected by your PC as MTP device. Also check if MTP is enable from TWRP.
sahil.kalka;718163.28 said:
You can use usb OTG from TWRP and change storage. Also if you connect your phone to PC with usb cable from recovery mode. Your phone shall be detected by your PC as MTP device. Also check if MTP is enable from TWRP.
Click to expand...
Click to collapse
Should we transfer file normally ... Like just open twrp and connect to my pc. Or any complicated step brother?
My mobile is LeEco Le2 x526 indian snapdragon version...
mufeethmohd said:
Should we transfer file normally ... Like just open twrp and connect to my pc. Or any complicated step brother?
My mobile is LeEco Le2 x526 indian snapdragon version...
Click to expand...
Click to collapse
You can try and tell
Just open twrp and connect your phone to your computer. It should automatically detect your device as MTP. Alternatively, use an OTG USB Drive and install rom from it.
So I've got a 3T which currently has no OS installed, just the TWRP3.2.3-0. The problem is that every time I connect the phone to the PC, the PC will only recognise the phone as Unknown USB device (Device Descriptor Request Failed). Due to this I cannot use adb to transfer files to the phone or transfer files directly to the internal storage.
I have tried using Minimal adb but device isn't found, tried different USB ports and cables too. For some reason the recovery does not read devices attached to OTG as I have also tried to transfer files using this method.
Any suggestions as to what I can do to make my PC recognise this device? Thanks
first of all check your usb cable then use this op3/t tool
it will install all drivers, unlock, decrypt, install twrp and dm-verity issue solution
https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/toolkit-root-recovery-drivers-t3651138
Hayatzada said:
first of all check your usb cable then use this op3/t tool
Click to expand...
Click to collapse
device isn't found, tried different USB ports and cables too
Click to expand...
Click to collapse
So yeah.
@op USB port in the phone is damaged
Hayatzada said:
first of all check your usb cable then use this op3/t tool
it will install all drivers, unlock, decrypt, install twrp and dm-verity issue solution
https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/toolkit-root-recovery-drivers-t3651138
Click to expand...
Click to collapse
But I cannot enable USB debugging since there is no OS installed, however I have not yet tested this program.
The USB port was working normally before the OS was removed. This problem started once there was no OS and just recovery. Is there truly no other way I can transfer the ROM to the phone? Thanks for your help
J-_-M-_-C said:
But I cannot enable USB debugging since there is no OS installed, however I have not yet tested this program.
The USB port was working normally before the OS was removed. This problem started once there was no OS and just recovery. Is there truly no other way I can transfer the ROM to the phone? Thanks for your help
Click to expand...
Click to collapse
while having TWRP installed pc should recognize your phone, if encrypted phone shows Oneplus 3 in my computer Location without showing internal storage,
Check your USB cable, then boot into fastboot(Boot loader By pressing Power & volume up button together while phone is in off state) connect your cable to pc and phone and run the tool, to install op3 driver select number from your pc
install driver (1)
unlock bootloader (3)
decrypt(10)
install twrp (5)
boot into TWRP from fastboot screen select recovery and reboot
Push superSU (7) (it'll copy superSU into internal memory) install supersu otherwise phone lose root and go back to encrypted state and you cant see internal storage in pc
reboot into recovery and copy your rom, gapps and Magisk 17.1, install them
You are done now
Hayatzada said:
while having TWRP installed pc should recognize your phone, if encrypted phone shows Oneplus 3 in my computer Location without showing internal storage,
Check your USB cable, then boot into fastboot(Boot loader By pressing Power & volume up button together while phone is in off state) connect your cable to pc and phone and run the tool, to install op3 driver select number from your pc
install driver (1)
unlock bootloader (3)
decrypt(10)
install twrp (5)
boot into TWRP from fastboot screen select recovery and reboot
Push superSU (7) (it'll copy superSU into internal memory) install supersu otherwise phone lose root and go back to encrypted state and you cant see internal storage in pc
reboot into recovery and copy your rom, gapps and Magisk 17.1, install them
You are done now
Click to expand...
Click to collapse
Thank you for this information, however I get as far as installing the drivers but the PC still shows phone as Unknown USB Device (Device Descriptor Request Failed) and therefore the program does not find the phone. Tried this on two different PC's.
Go to advance in TWRP then click on sideload and flash the os using sideload command i. e. adb sideload filename. zip
J-_-M-_-C said:
Thank you for this information, however I get as far as installing the drivers but the PC still shows phone as Unknown USB Device (Device Descriptor Request Failed) and therefore the program does not find the phone. Tried this on two different PC's.
Click to expand...
Click to collapse
please please please check your cable
johnybravo.1981 said:
Go to advance in TWRP then click on sideload and flash the os using sideload command i. e. adb sideload filename. zip
Click to expand...
Click to collapse
Since the phone is only recognised as Unknown USB Device (Device Descriptor Request Failed) in the the win10 Device Manager, fastboot devices does not find any attached devices and I cannot transfer files through ADB.
I have tested the cable I am using with another phone and I was able to transfer files to the other phone using the same USB cable.
J-_-M-_-C said:
Since the phone is only recognised as Unknown USB Device (Device Descriptor Request Failed) in the the win10 Device Manager, fastboot devices does not find any attached devices and I cannot transfer files through ADB.
I have tested the cable I am using with another phone and I was able to transfer files to the other phone using the same USB cable.
Click to expand...
Click to collapse
i have the exact same problem as u my friend i had that problem so i just sideloaded my stock rom and searching for a method to fix this if u find a way to make the device recognised in twrp pls let me know
J-_-M-_-C said:
Since the phone is only recognised as Unknown USB Device (Device Descriptor Request Failed) in the the win10 Device Manager, fastboot devices does not find any attached devices and I cannot transfer files through ADB.
I have tested the cable I am using with another phone and I was able to transfer files to the other phone using the same USB cable.
Click to expand...
Click to collapse
Just sideload dude. I came across the same issue 2 days ago.
Or flash using usb otg.
johnybravo.1981 said:
Just sideload dude. I came across the same issue 2 days ago.
Or flash using usb otg.
Click to expand...
Click to collapse
I have tried using USB OTG but the recovery does not detect my connected usb drive. Regarding sideload, when I boot to recovery and select adb sideload, and connect the phone to my PC I get a USB device not recognised message. The commands adb devices and fastboot devices do not list my phone.
J-_-M-_-C said:
I have tried using USB OTG but the recovery does not detect my connected usb drive. Regarding sideload, when I boot to recovery and select adb sideload, and connect the phone to my PC I get a USB device not recognised message. The commands adb devices and fastboot devices do not list my phone.
Click to expand...
Click to collapse
Try this guide if your phone detects as Qualcomm in device manager then proceed otherwise check your charging port (type c port) as you mention usb otg didn't detected and usb cable worked with other phones.
don't forget to clean your type c port if dirty or rusted. :good:
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Hayatzada said:
Try this guide if your phone detects as Qualcomm in device manager then proceed otherwise check your charging port (type c port) as you mention usb otg didn't detected and usb cable worked with other phones.
don't forget to clean your type c port if dirty or rusted. :good:
https://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Click to expand...
Click to collapse
I have tried to install the qualcomm driver but when I go to Device Manager -> Update Driver -> Have Disk and select the qcser.inf file I get the following message: "The folder you have specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems." I have disabled driver signature verification. No idea why nothing seems to be working.
J-_-M-_-C said:
I have tried to install the qualcomm driver but when I go to Device Manager -> Update Driver -> Have Disk and select the qcser.inf file I get the following message: "The folder you have specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64 based systems." I have disabled driver signature verification. No idea why nothing seems to be working.
Click to expand...
Click to collapse
which method do you try? i suggest full method, first one didn't worked for me .
Hayatzada said:
which method do you try? i suggest full method, first one didn't worked for me .
Click to expand...
Click to collapse
I have tried Method 1 and arrived till step 6. Then when I try to select the file I get the error I mentioned in my previous post.
J-_-M-_-C said:
I have tried Method 1 and arrived till step 6. Then when I try to select the file I get the error I mentioned in my previous post.
Click to expand...
Click to collapse
try to connect otg keyboard and type in TWRP advance section selecting terminal
if keyboard works, your type c port is ok otherwise change or repair the port
Hayatzada said:
try to connect otg keyboard and type in TWRP advance section selecting terminal
if keyboard works, your type c port is ok otherwise change or repair the port
Click to expand...
Click to collapse
Tried to connect a keyboard with otg and it did not work with this phone. It worked fine using the same otg cable on another phone.
J-_-M-_-C said:
Tried to connect a keyboard with otg and it did not work with this phone. It worked fine using the same otg cable on another phone.
Click to expand...
Click to collapse
now you should go for a hardware repair of Type C port
Hayatzada said:
now you should go for a hardware repair of Type C port
Click to expand...
Click to collapse
I already said that at the beginning.
Hello!
2 pcs P20 Pro (now servicing). Tested 10 and 9 version, not read OTG (in system or in recovery).
Now offline (not PC) update from SD available only... this phone not support SD-Card! Only OTG-SD.
-Attached 3 other USB-OTG converter cable (1pcs new, 1pcs 20x used)
-Attached pendrive (exFAT, FAT32, NTFS)
-Attached SD (exFAT, FAT32) in Kingston USB-SD converter
Pendrive LED not on: not readed.
Tested OTG cable to other USB device, 5V ok, Data line voltage ok: USB all 4 pin ok!
Tested OTG cables other older droid 5.1 phone, all working, SD readed with converter, pendrive readed correctly.
One P20 Pro bricked. Bootloader locked, fastboot mode available only (screen blank), Multi-Tool flasher/unbricker "stock service flash" downloaded to phone and failed (no write permission). Hisuite not support this phone recovery. No other method to unbrick, only SD-update. How to working this port?
Live system not read OTG and bricked system not read OTG.
Live system developer mode settings (*#*#2846579#*#*) changed to default, Manufactture, Hisuite, same. Developer software upgrade: 1. Memory card, 2. APK standalone, not available OTG/USB. Connected to PC: Photo mode, File mode and Charging mode available only (not available reverse charge).
USB port measurement: not powered live system, booting, recovery "update OTG mode" not powered the USB port!
1 phone= inside cable USB to mainboard bad? 2 phone= 2 cable bad??? Not real!
Charging ok. PC connection ok.
What is a problem???
Hey Looking Forward To Help You..
1.Go To "SETTINGS"
2.Search For "OTG"
3.Some Phones Like Eg.Oneplus Have OTG Option In the Status Bar Customisation Tab..
4.Use An Prober Cable [OR] See If It Works On The Other Phone..
5.Important The Drive/SD You're Using Doesn't Have Any Hardware Issues!
6.Best Thing Is Two Option.
A.Software Update.
B.Factory Reset - Data Loss [Not Recommended]
7.Or It Must Be an Hardware Issue Please Reach Out To The Nearest Mobile Service Centre.
Alwaya XDA Peace
Hello!
I'm writed: NEED TO BRICKED PHONE = no settings, no menu, no system. (1-2-3 point not relevant)
4-5 writed: tested other type phone with cable, SD, pen, all working. P20 Pro not powered OTG (no 5V out)!
6: not available
7. Display changed, back changed, not original phone, not free (guarantee) service. Service + old unrooted, locked bootloader phone, ... too
I'm used IDT to flash. Only have CLT-AL00A-BD_1.0.0.46 Board Software firmware. Flashed in testpoint mode. All upload ok. After power on:
Imei: 000000000000...
Model: unknown
EMUI: 3.1
Droid: 5.1
Only have test softwares this firmware. No browser, etc.
How to update normal version?
*#*#2846579#*#* menu, update sd (read to available dload/update.app), restart, read SD 1-2s, Update failed!
What is a good version for SD update? First 8.1 or latest 10?
HiSuite searching update, no update!
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Mr. V. said:
Restored phone with PC and USB.
Problem: The TWRP version.
Changed TWRP version to 3.3, OTG working, newer version (3,4, 3.5) unsupported OTG.
More function not work in old version (restore backed up system partition: error, etc.).
Click to expand...
Click to collapse
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
departe said:
Hi there,can you please help me out ?I have one Huawei P20 pro, that had a fall and the back was smashed in to pieces,also glass on the back that's covering the camera was broken.I have cleaned it up and replaced the back on it ,now it was really temperamental,as of you tap on it it will just restat itself,apart from that wa ok,soo I was thinking maybe software error,soo done a factory reset and now is stuck in boot loop.Is not powering on the android operating system.I have tried all the restoration methods that you had tried upper but can't make it load the android operating system....I even bought that small and card reader that you can plug in the charger port to try and install the operating system again ,but even of the led light on the card reader is on , doesn't do anything...any guidance?
Thank you!
Click to expand...
Click to collapse
If not rooted, use PC with Hisuite official software.
If not communicated to phone, need to reflash manually. This is not free.
In DC-Unlocker site download 2 software + pay 3 day license for this softwares and use.
Bootloop and cracking not related!
Cleared chaches??? Not solve?
Done factory erase,done cache memory erase,done restart and just staying on the Huawei screen where is saying down at the bottom Powered by Android for few minutes and after that goes in to the white meniu where you can select factory reset,updates (tried the WiFi update is not connecting),now I got the firmware and Kiwibird 4 in 1 card reader that you can plug up the "ass " of the phone usingOTG hopefully I can install the firmware from there...I have downloaded the firmware and just putting it on the SD card...have you tried that way?
Firmware install not working "offline" mode.
TWRP and any other not read OTG, only live system.
Another problem: OTG only support FAT/FAT32, not supported NTFS, ExFAT (Live system: need Paragon software). The firmware file more than FAT32 filesize limit (2GB), only stored NTFS or ExFAT = FW file too large for FAT.
Your FW upload only 3 method.
1. Boot to recovery, and set ADB mode, download the FW zip to DLOAD dir (from PC with USB cable + ADB), and install. (NOT TESTED!)
2. Boot to recovery, and set wifi recovery. Connect to wifi AP, download latest downloadable FW and install. (NOT TESTED)
3. Paid method: DC-Unlocker & DC-Phoenix work with standard recovery (limited access) and work own uploaded recovery (self opened bootloader/virtual testpoint).
OTG/SD not option for FW update!
Thanks you for your time,and writing back to me,yes,good point with different types of partitions,I forgot about it...I did try the nr.2 method and is not working,it can't download anything,I have trying different wiFi points,not starting any download,it does connect to the WiFi but can't find anything to be downloaded.
First method is not going to work as I have no access to set ADB mode,only fastboot mode,and is displayed that phone is locked soo, bootloader is locked and can't open it...soo only method to try is theast one...but don't know how much will that cost me.
Also I am thinking of other people said that the battery can have a problem too as my battery is getting empty fast...also something strange maybe..but if you tap the phone on the upper side on the edge it's restarting itself...I am thinking to open it up and try like that as in the past had been dropped soo back glass and camera glass have been replaced,but was working,until I have done factory reset and the process got interrupted in the middle of it and that was it...since.then..Inhave tried reset, factory reset,wipe cache, nothing working.
The softwares for 3 day ~20$. The DC-unlocker site write correct actual price.
If bootloader not opened, only available FW-update in Hisuite Huawei official software.
Test in recovery mode or bootloader mode.
(My recovery is TWRP, not available recovery method. Your available.)
Test connect to phone this software! If yes, but not available firmware, need to use special VPN software. Download offline your phone firmware to PC, or set specified link to VPN soft and Hisuite: update available! (Need Hisuite downgrade for this VPN method.)
If this update not working, purchase 3day license.
Need offline firmware file for your phone.
Soft-bootloader open if not working, use testpoint. (The DC-Phoenix manual write the testpoint position.)
Start the process in PC, Short testpoint to GND and plug USB. (If need, install drivers.)
Started upload unlocked bootloader and unlocked old recovery. After finished, reboot to recovery. (Without accu, work end... after reboot only work with plugged accu.) (Not need unplug accu!)
After booted recovery, wait PC to identify recovery mode, and started download.
The download 2 part! 1= firmware, 2=cust file. Need all selecting!
The download automated. Please wait for 100%. After end, rebooted to system.
Check IMEI, phone signal, MAC numbers. All ok? End flashing.
Wrong or no IMEI, bad MAC? Need the second software.
The second software unlock bootloader, FRP lock, all lock.
Unlocking bootloader (not need): software say the unlocking number, phone boot bootloader, PC USB ADB (Fastboot) command need to write the code, phone question: yes? Is yes, rebooted to recovery and CLEAR ALL DATA! After cleraing, boot system.
All phone start displayed "Phone untrusted".
Unlocked bootloder = uploadable TWRP or any recovery, after not need testpoint to flash.
Root: only rootable 8.1 system. (Not tested 8.1+, bootloader code not readable.)
Hi there mate,I have manage.to fix my phone,just following an old post here,with one russian website,where I got the firmware,put it on the SD card ,by the way you can make it eXFat ,will work for larger sizes,mine was 128 GB,and had to reboot the phone in update mode but selecting OTG/SD and it worked first time!I manage to update it with Android 10.After that all good,done the updates up to 12.
Thank you for your support and time!
Have a great week!
8.1 (stock) System and recovery not compatibilie / not read ExFat.
I have 8.1 System (rootable). In 8.1 OTG/SD update not working.
Check your filesystems:
Code:
$ cat /proc/filesystems
...
msdos
vfat
exfat
...
(This is a different device.)
Yes, system ok... i was wrong.
TWRP recovery not read any OTG! Other version TWRP read OTG, and not read correctly system partitions (half phone not read).
Standard recovery not available for me to testing.
I'm running an older version of OMNIROM with Microg on my Zenfone 8 (US). Obviously, the bootloader is unlocked. I've got TWRP on it also. A few days ago I had a problem where the cell service just died. I couldn't enable Mobile Data and had a little x over the cell signal bars. I finally got the cell service working by wiping Dalvik Cache, Data, and internal storage. However, since I just wiped my phone, I'd like to update it to Android 12 (either OMNIROM or LineageOS). However, my Windown 10 PC does not see the phone when I try to use ADB or Fastboot. It doesn't list any device.
Things I've tried:
-In addition to the ASUS cable, tried OnePlus 6's cable
-4 different USB ports on my PC (2.0 and 3.0)
-Numerous ADB drivers, including ASUS' driver, and many generic drivers
-Three different ADB/Fastboot installations
-Ran Windows' device troubleshooter
-Tried installing driver with Windows ignoring driver certificates
I do have USB Debugging enabled. I can see the phone when it is running the ROM and set to File Transfer.
Any suggestions on what I could try to get my phone recognized?
I've been at this most of the day. I post here, then try one more driver change, and it works. Well, it worked enough to get fastboot to recognize it, so I flashed stock.
The driver change I did was to pull up Devices and Printers in Win10. I right-clicked on the Zenfone 8, selected Properties | Hardware. It showed that there was no driver installed for the device. I clicked on Update Driver, and pointed it to the folder with the ASUS official drivers (which I had installed previously in a different manner). I let it do its thing. Rebooted, and it worked. I hope this helps somebody else.
Yippee38 said:
I'm running an older version of OMNIROM with Microg on my Zenfone 8 (US). Obviously, the bootloader is unlocked. I've got TWRP on it also. A few days ago I had a problem where the cell service just died. I couldn't enable Mobile Data and had a little x over the cell signal bars. I finally got the cell service working by wiping Dalvik Cache, Data, and internal storage. However, since I just wiped my phone, I'd like to update it to Android 12 (either OMNIROM or LineageOS). However, my Windown 10 PC does not see the phone when I try to use ADB or Fastboot. It doesn't list any device.
Things I've tried:
-In addition to the ASUS cable, tried OnePlus 6's cable
-4 different USB ports on my PC (2.0 and 3.0)
-Numerous ADB drivers, including ASUS' driver, and many generic drivers
-Three different ADB/Fastboot installations
-Ran Windows' device troubleshooter
-Tried installing driver with Windows ignoring driver certificates
I do have USB Debugging enabled. I can see the phone when it is running the ROM and set to File Transfer.
Any suggestions on what I could try to get my phone recognized?
Click to expand...
Click to collapse
Any change to try Linux on your PC ? e.g. via LIveCD or in a virtual machine with access to the USB port?
bnsmb said:
Any change to try Linux on your PC ? e.g. via LIveCD or in a virtual machine with access to the USB port?
Click to expand...
Click to collapse
I could try it on my laptop which only runs linux, but at this point, I'm past that, so I really don't need to go back and try it again.
Good evening.
I have the following equipment and an unsolvable problem:
- Oneplus Nord CE 5G
- Twrp-3.5.2_11-ebba
- Bootloader unlocked
- ADB platform tools 30.0.5, 33.0.1 and 33.0.3
For the last five months I have been trying to root the phone but nothing works. The only thing I can start is twrp in recovery mode.
System boot generates: dm-verify device corrupted Force Dump kernel_restart.
Initially, internal and OTG USB showed 0MB but I could change the file internal file system and now it is showing the correct capacity. The laptop also detects it now as internal folder but no contents.
OTG USB never shows anything and I have tried different SUB sticks and formats.
There is no way to transfer anything from the PC to the phone or vice versa.
When in twrp recovery mode, the phone accepts ADB commands but whenever I try bootloader mode or fastboot mode from the twrp menu, I cannot issue fastboot commands from my laptop (which worked before when I unlocked the bootloader).
I believe the only way is to flash the phone completely and I have extracted the files using Payloader Dump.
However, without fastboot commands there is no way to transfer anything to the phone and install.
I have not tried an SD card yet and it would be a nano type.
Does anyone have any idea? I am seriously frustrated and have seen any error message imaginable.
Thanks a lot in advance.
Audoghast
Audoghast said:
Good evening.
I have the following equipment and an unsolvable problem:
- Oneplus Nord CE 5G
- Twrp-3.5.2_11-ebba
- Bootloader unlocked
- ADB platform tools 30.0.5, 33.0.1 and 33.0.3
For the last five months I have been trying to root the phone but nothing works. The only thing I can start is twrp in recovery mode.
System boot generates: dm-verify device corrupted Force Dump kernel_restart.
Initially, internal and OTG USB showed 0MB but I could change the file internal file system and now it is showing the correct capacity. The laptop also detects it now as internal folder but no contents.
OTG USB never shows anything and I have tried different SUB sticks and formats.
There is no way to transfer anything from the PC to the phone or vice versa.
When in twrp recovery mode, the phone accepts ADB commands but whenever I try bootloader mode or fastboot mode from the twrp menu, I cannot issue fastboot commands from my laptop (which worked before when I unlocked the bootloader).
I believe the only way is to flash the phone completely and I have extracted the files using Payloader Dump.
However, without fastboot commands there is no way to transfer anything to the phone and install.
I have not tried an SD card yet and it would be a nano type.
Does anyone have any idea? I am seriously frustrated and have seen any error message imaginable.
Thanks a lot in advance.
Audoghast
Click to expand...
Click to collapse
While your phone is in fastboot and connected to your laptop; How is it shown in device manager?
Good evening.
I found the solution to unbrick my Oneplus Nord CE 5G and here it is.
Status: - normal start leading to Qualcomm Crash Dump screen
- Recovery mode into TWRP possible but no transfer of files to/from phone
- No Fastboot possible
Procedure:
Install Qualcomm USB Drivers from
https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
You may have to launch the command prompt as admin and type:
bcdedit /set testsigning on
I did not have to do it because the Qualcomm Driver installation did it for me.
After restart you will see the following message in the lower right side of your PC:
Testmode Windows 10 Pro + build number
To get rid of end at the very end type:
bcdedit -set testsigning off
Download the following package:
Europe: https://onepluscommunityserver.com/...BA/R/OnePlus_Nord_CE_EU_OxygenOS_11.0.9.9.zip
India:
https://onepluscommunityserver.com/...R/OnePlus_Nord_CE_India_OxygenOS_11.0.4.4.zip
These packages contain the MSM Download Tool and the respective files. Beware that you have to get the correct bundle for your phone. Other bundles contain MSM Download Tool too but will not be compatible and the tool generates a failure message.
Launch MSM and type OTHER at login.
Target was EU in my case.
Then click on start.
Now your phone needs to boot into EDL mode. It worked for me from the TWRP Reboot screen but supposedly starting the phone by holding the volume up and down buttons for 45 seconds does the same.
The screen will be totally black, no beep, no vibration, no feedback.
Then connect the USB cable and MSM will start working. After about 5 minutes the phone should be back to normal.
ADB commands worked again too (phone was being recognized as USB device under device manager). However, fastboot did not work. The device was listed as other device in the manager.
After updating the driver using the following files everything worked:
https://drive.google.com/drive/folders/1D96njoYn-n3alu3ggaK3Kw8hMGLKhJVg
Now I am back to rooting and will report about that too.
Good luck