Hello all,
Good morning!
I have an USB type C earphones and I need to enable this option attached every time for he work. How can I keep ON? Have any automation app that when I plug earphone he activate for me?
Thanks in advanced,
Rodrigo
Related
Hi guys!
As we all know..there is a adapter for ipads to connect to a usb/card adapter to our cameras to view or even transfer photos over on the go.
Wonder is there a way to connect it via OTG cable?
meaning to say directly from the camera's port --------> OTG cable ----------> Samsung Note.
possible?
Hope to hear from u guys soon!
hinata76 said:
Hi guys!
As we all know..there is a adapter for ipads to connect to a usb/card adapter to our cameras to view or even transfer photos over on the go.
Wonder is there a way to connect it via OTG cable?
meaning to say directly from the camera's port --------> OTG cable ----------> Samsung Note.
possible?
Hope to hear from u guys soon!
Click to expand...
Click to collapse
Why not ? I connect it all the time. Just you have to use proper cabling to make it use. They will be in Mass Storage mode from which you can transfer things you want to
sahilarora2003 said:
Why not ? I connect it all the time. Just you have to use proper cabling to make it use. They will be in Mass Storage mode from which you can transfer things you want to
Click to expand...
Click to collapse
??? How u do it?
I connect using the camera's usb cable to connect to my EP-2 , connect the usb into the OTG cable and that to my Samsung Note.
Yeah the camera lights up..i choose mass storage..
but nothing shows up after that on my Note. screen on the camera turns off too. but camera unit still on.
Kindly advice!! :fingers-crossed::fingers-crossed:
Thanks all.
Sent from my GT-N7000
Hiho,
i installed my Nexus 7 in my car and have now a little "Problem".
I would use a Y-Cable for OTG use (Rear Camera) and Charging the Nexus.
My problem is, i would start my webcam automaticly by switching to the rear gear.
the plan is, to integrate a bridge to activate the car-dock mode when setting power to the mosfet.
the car-dock mode is managed by tasker and would start the rear cam automaticly.
but now the problem, how can i enable the car-dock or desktop dock mode?
what i need?
is there a way to manage it?
i see a other post, with the wireless charging mod, and the tab enterd dock-mode.
what will happend when i connect the Y cable with power and otg (webcam) and than i set power and gnd to the poggo pins?
ps. mod? could you move please to Q/A Thread.... sry my mistake.
Hi, recently I've installed Carbon ROM on my phone and I saw an option labeled "USB-VBUS Power" under the app "NovaThor Settings", I know that I9070 doesn't support usb OTG, but I've checked with a multimeter and the port gives an output of 3.9v
.
My questions are, what can I do with this option? Will I do any harm to the battery if I use it?
Any way to use the usb as a serial port or something? (Interfacing with Arduino for example..)
Thanks in advance
M05K1T0 said:
Hi, recently I've installed Carbon ROM on my phone and I saw an option labeled "USB-VBUS Power" under the app "NovaThor Settings", I know that I9070 doesn't support usb OTG, but I've checked with a multimeter and the port gives an output of 3.9v
.
My questions are, what can I do with this option? Will I do any harm to the battery if I use it?
Any way to use the usb as a serial port or something? (Interfacing with Arduino for example..)
Thanks in advance
Click to expand...
Click to collapse
You can use it to charge your other phone.
Hey there!
So I got my P20 Pro 2 months ago. Suddenly it stopped playing music through type c headphones. I used the original headset only once, when I opened it and 2 months later, it doesn't work, it wasn't even used. When I connect the headset, the usb options are available, so the phone sees it like a usb cable. The original type c to 3.5mm headphone converter works well but it's so bad, that I ordered a new one wirh built-in dac and that doesn't work as well as the original type c headset aaaand when I plug it out or in, the chrome refreshes itself. I've read that other phones with this jackless setup have problems too. Is there any solution?
Hi. Now I have a simular problem. Lesser audio switch can help you. But you need to choose out monitor manually. It isn't convenient, but work for me.
i also have this problem....
Hi guys!
I bought headphones USB-C Oppo MH135-3 and tried connect them to Realme 8 Pro but headphones doesn't work. Despite fact that theadphones are connected to the USB-C, the sound is still heard from the phone's loudspeaker.
I turned on the OTG function, but it also didn't help.
There was not even an icon on the phone that the headphones are connected, nor any system message about the connected device
Has anyone similar problem and knows how to solve it?
I think, theres no solution. That headphones works only with Oppo device but not all of them...
(I checked it in store)
Strange
Go to settings/additional settings and Look for OTG switch. Unfortunely you have to check that box every time you connect headphones. At least it works for my setup - OTG adapter + senheisser earbuds..
matiirk said:
Go to settings/additional settings and Look for OTG switch. Unfortunely you have to check that box every time you connect headphones. At least it works for my setup - OTG adapter + senheisser earbuds..
Click to expand...
Click to collapse
Doesn't work