Related
I found several instructions of rooting Samsung Galaxy Mini 2, but they all used Odin. Is there any way of rooting this phone using Heimdall?
First, download ClockWorkMod for S-GT6500D. Remove the md5 extension, untar it and flash using
Code:
heimdall flash --RECOVERY recovery.img
Then download RootMe.zip from here: http://mobilecon.info/root-samsung-galaxy-mini-ii-gt-s6500.html#sthash.PrChdsEn.GqtLI0qf.dpbs
And execute all the commands from the .bat file.
UPDATE 09/20/2016 - Root is now available for the SM-T285 (custom ROM and SM-T280 to follow) see post for details (http://forum.xda-developers.com/showpost.php?p=68777842&postcount=27)
After some work I've managed to debloat my Galaxy Tab A(6) 7.0 LTE (SM-T285/T280). We all know that with a locked bootloader we
can at least do customizations with the system partition:
Here is a simple guide with hopes that more people with the device can continue to allow for more ROM customizations:
Tools/Requirements:
================
- Ubuntu as my OS
- make sure you have adb installed and running (See the android developers guide on how to do this)
- Heimdall 1.4.1
- A copy of the stock firmware zip from samsung for your device
- 7zip to be able to unzip the firmware from above
- Android AOSP fsutils simg2img and make_ext4fs (Attached) (note that your make_ext4fs needs to be patched to be able to generate samsung patches easily see gist) for some reason samsung chose to use a slightly different sparse file layout for this device. Using the stock make_ext4fs to generate an image will cause heimdall ( ad Odin) to stop data uploads after the first packet stream.
Or if you still want to use stock make_ext4fs you can try using Chainfire's sgs4ext4fs and run this after you generate your system.img, I haven't tried this route personally myself.
Step By Step (Part 1 - Mount stock system.img for modification)
==========
1. Create a folder to do your work like samsing_kitchen for example. Place your
stock firmware package there
Code:
mkdir samsung_kitchen
cd samsung_kitchen
2. Extract your stock firmware's system.img using 7zip
Code:
7z x XTC-T285XXU0APCN-20160421170750.zip
7z x T285XXU0APCN_T285OLB0APC6_T285XXU0APCN_HOME.tar.md5
Should see a couple of image files, one of them is system.img.
3. Create mount point and convert from sparse image to mountable image and then mount it
Code:
mkdir system
simg2img system.img system.img.raw
sudo mount -t ext4 -o loop system.img.raw ./system
The contents of the system image should now be visible inside the system folder you
just created. You can now proceed to modifiying it (e.g. remove apps)
(Part 2 - Repackage image for flashing to device)
=================================================
DISCLAIMER: As always make sure you backup your important files in case
something goes wrong! I will not be responsible for any losses resulting from this
activity. Also this activity may void your warranty.
Prequisites:
- Make sure you have heimdall properly working.
- Make sure you have oem unlock. This should be visible in developer settings
To know if it is enabled/disable FRP protection should be disabled when you go
in Odin mode.
1. pull the file_contexts file from .your device ( or download the attached in this post).
Code:
adb pull file_contexts
on a connected device in developer mode. You will need this file so that the permissions are properly set when building the image
2. Exit from system back to your working folder (e.g. samsing_kitchen ) and run
the following:
Code:
sudo make_ext4fs -s -l 2147483648 -S file_contexts -a system new_system.img ./system
This should create a flashable image called new_system.img
3. Restart your SM-T285 into Odin Mode (Power-off, then hold home vol-down + power until Odin Mode shows up)
4. Flash using Heimdall
Code:
heimdall flash --SYSTEM new_system.img
Your device should automatically restart after this. If something goes wrong you can always flash the original system image back.
Making an ODIN flashable image
----------------------------------------
To create an image compatible with ODIN (tar.md5) make sure you have a copy of the stock image zip from samsung and extract (using 7zip) its contents to a folder:
An extracted file should look like this:
Code:
boot.img
cache.img
hidden.img
nvitem.bin
recovery.img
SPRDCP.img
SPRDGDSP.img
SPRDLTEDSP.img
SPRDWDSP.img
system.img
replace the stock system.img with the one you created from above:
Code:
cp ../new_system.img system.img
tar and md5 it:
Code:
tar -H ustar -c boot.img cache.img hidden.img recovery.img SPRDCP.img SPRDGDSP.img SPRDLTEDSP.img SPRDWDSP.img system.img >T285_CUSTOM.tar
md5sum -t T285_CUSTOM.tar > T285_CUSTOM.tar
mv T285_CUSTOM.tar T285_CUSTOM.tar.md5
as per ashyx this should also work as well:
Code:
tar -H ustar -c system.img > system.tar
md5sum -t system.tar > sytem.tar
mv system.tar system.tar.md5
Optionally Zip it if you want:
Code:
7z a T285_CUSTOM.zip T285_CUSTOM.tar.md5
This guide should work for the T280 as well, though I can't confirm it since I don't have access to that model.
Petition for samsung to unlock the device:
https://www.change.org/p/samsung-unlock-the-bootloader-for-the-samsung-galaxy-tab-a-7-0-2016?recruiter=286570213&utm_source=petitions_share&utm_medium=copylink
Custom ROM to enable move apps to sd (apps2sd like support):
http://forum.xda-developers.com/android/development/rom-samsung-galaxy-tab-7-0-lte-2016-sm-t3455788
@jedld
Nice guide, just a few things though.
I don't think it's really necessary to use the file contexts as we're building a system image and all permissions should remain intact.
Regarding the chunk size, Chainfire created sgs4ext4fs to deal with this, it just needs to be run afterwards on the sparse image to patch the headers.
What is the source for the make_ext4fs patch or did you create this patch?
Lastly some people may prefer to use ODIN to flash.
So maybe you could add to the guide that the image can be repacked into a ODIN flashable tar using 7-zip.
By the way the guide will work for the T280 too, so you may want to add that.
Thanks.
ashyx said:
@jedld
Nice guide, just a few things though.
I don't think it's really necessary to use the file contexts as we're building a system image and all permissions should remain intact.
Regarding the chunk size, Chainfire created sgs4ext4fs to deal with this, it just needs to be run afterwards on the sparse image to patch the headers.
What is the source for the make_ext4fs patch or did you create this patch?
Lastly some people may prefer to use ODIN to flash.
So maybe you could add to the guide that the image can be repacked into a ODIN flashable tar using 7-zip.
By the way the guide will work for the T280 too, so you may want to add that.
Thanks.
Click to expand...
Click to collapse
I don't think it's really necessary to use the file contexts as we're building a system image and all permissions should remain intact.
Click to expand...
Click to collapse
I remember encountering a boot loop without that, let me check again and I'll update the guide.
What is the source for the make_ext4fs patch or did you create this patch?
Click to expand...
Click to collapse
Just applied the following patch on latest aosp sources:
https://gist.github.com/jedld/4f388496bda03b349f5744f367749a67
There is a magic number used which I can't figure out, the value is different between SM-T285 ROMS coming from different regions.
Nice to hear about sgs4ext4fs though, probably wouldn't be able to know based on the problem I encountered that the tool also applies unless someone pointed it out.
https://www.change.org/p/samsung-unl...edium=copyLink
Petition for unlocked bootloader for samsung, please sign
http://samsung4android.ru/?ipub=422
any thoguth on this?
klemen241 said:
http://samsung4android.ru/?ipub=422
any thoguth on this?
Click to expand...
Click to collapse
ashyx already tried everything. CF-auto root requires an unlocked recovery, the tablet won't even accept a repacked recovery image. Besides the guy in the video wasn't even using a SM-T285, if you look closely the files he used were for the SM-T550.
klemen241 said:
https://www.change.org/p/samsung-unl...edium=copyLink
Petition for unlocked bootloader for samsung, please sign
Click to expand...
Click to collapse
link is broken though, you must have used the auto truncated link, use this instead:
https://www.change.org/p/samsung-un...edium=copylink&recuruit_context=copylink_long
What about those custom roms? As far as i can see we can use modified stock rom. Can we go anywhere with that? And can someone explain how to make external storage bigger with SD?
SM-T285M with locked bootloader - research ...
First, I have a SM-T285M which is a Galaxy Tab A6 7.0 LTE with a COO CSC. and is factory unlocked (UB as Samsung notates it these days. It's got North and South America LTE bands, and unfortunately it also has a locked bootloader just like the T285 and the T280.
Hear me out on this theory I have come up with ....
I recently stumbled across mention of Samsung pushing out an OTA at some point that broke root at the kernel level forever. I read Chainfire has created a patch that fixes this on some models. Unfortunately not the T28x's due to the locked BL.
While looking for stock ROMS, I discovered differences in the pit files and the size of hidden.img that occurred between 3/2016 and 4/2016 releases leading me to believe that's when they locked the bootloader and pushed the root killing kernel ota to the T285M. The hidden.img was shrunk to a little more than the boot.img and the PIT was modified beginning with the 4/26 release
My T285M was built on 4/7/2016 and now having the new pit and hidden.img, any attempts at ODIN flashing of the 3/23 factory rom (3/10 build) crashes out at hidden.img. I figure I will be unable to go back to the 3/10 build unless I use the pit for that 3/10 build - I'm not ready to play that deep on this .... yet, I don't even know if I am on to anything at this point. but maybe someone else wants to ....
Take a peek at the contents of the three released roms for the T285M in the capture below and if anyone thinks theres hope in getting to root by going back to 3/10 build and PIT I can point you to the three files for experimentation, or even better to get to chainfire if this is doable.
BTW jedid GREAT debloat for the T285. I'm using the system.img on my T285M , I hated Touchwiz so much, now all we need is root. see if these tell you anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
klemen241 said:
What about those custom roms? As far as i can see we can use modified stock rom. Can we go anywhere with that? And can someone explain how to make external storage bigger with SD?
Click to expand...
Click to collapse
There are a number of things we can already do with a custom system.img like debloat, enable universal sd r/w, customizing apps, probably theming and fonts are also possible. Hopefully more people can come up with mods.
Unfortunately we need root/unlocked boot.img to do important things to fix the weakness of this device like changing partition sizes, enable apps2sd support, xposed framework, having customizable cpu performance governors/overclocking etc.
TopTongueBarry said:
First, I have a SM-T285M which is a Galaxy Tab A6 7.0 LTE with a COO CSC. and is factory unlocked (UB as Samsung notates it these days. It's got North and South America LTE bands, and unfortunately it also has a locked bootloader just like the T285 and the T280.
Hear me out on this theory I have come up with ....
I recently stumbled across mention of Samsung pushing out an OTA at some point that broke root at the kernel level forever. I read Chainfire has created a patch that fixes this on some models. Unfortunately not the T28x's due to the locked BL.
While looking for stock ROMS, I discovered differences in the pit files and the size of hidden.img that occurred between 3/2016 and 4/2016 releases leading me to believe that's when they locked the bootloader and pushed the root killing kernel ota to the T285M. The hidden.img was shrunk to a little more than the boot.img and the PIT was modified beginning with the 4/26 release
My T285M was built on 4/7/2016 and now having the new pit and hidden.img, any attempts at ODIN flashing of the 3/23 factory rom (3/10 build) crashes out at hidden.img. I figure I will be unable to go back to the 3/10 build unless I use the pit for that 3/10 build - I'm not ready to play that deep on this .... yet, I don't even know if I am on to anything at this point. but maybe someone else wants to ....
Take a peek at the contents of the three released roms for the T285M in the capture below and if anyone thinks theres hope in getting to root by going back to 3/10 build and PIT I can point you to the three files for experimentation, or even better to get to chainfire if this is doable.
BTW jedid GREAT debloat for the T285. I'm using the system.img on my T285M , I hated Touchwiz so much, now all we need is root. see if these tell you anything.
Click to expand...
Click to collapse
i was wondering the same thing, if ther is any chance of unlocking it on earlier versions.
Also i sent email to samsung support again, maybe they will be sick of us begging and release the lock
klemen241 said:
i was wondering the same thing, if ther is any chance of unlocking it on earlier versions.
Also i sent email to samsung support again, maybe they will be sick of us begging and release the lock
Click to expand...
Click to collapse
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=t285m
---------- Post added at 02:46 AM ---------- Previous post was at 02:36 AM ----------
TopTongueBarry said:
First, I have a SM-T285M which is a Galaxy Tab A6 7.0 LTE with a COO CSC. and is factory unlocked (UB as Samsung notates it these days. It's got North and South America LTE bands, and unfortunately it also has a locked bootloader just like the T285 and the T280.
Hear me out on this theory I have come up with ....
I recently stumbled across mention of Samsung pushing out an OTA at some point that broke root at the kernel level forever. I read Chainfire has created a patch that fixes this on some models. Unfortunately not the T28x's due to the locked BL.
While looking for stock ROMS, I discovered differences in the pit files and the size of hidden.img that occurred between 3/2016 and 4/2016 releases leading me to believe that's when they locked the bootloader and pushed the root killing kernel ota to the T285M. The hidden.img was shrunk to a little more than the boot.img and the PIT was modified beginning with the 4/26 release
My T285M was built on 4/7/2016 and now having the new pit and hidden.img, any attempts at ODIN flashing of the 3/23 factory rom (3/10 build) crashes out at hidden.img. I figure I will be unable to go back to the 3/10 build unless I use the pit for that 3/10 build - I'm not ready to play that deep on this .... yet, I don't even know if I am on to anything at this point. but maybe someone else wants to ....
Take a peek at the contents of the three released roms for the T285M in the capture below and if anyone thinks theres hope in getting to root by going back to 3/10 build and PIT I can point you to the three files for experimentation, or even better to get to chainfire if this is doable.
BTW jedid GREAT debloat for the T285. I'm using the system.img on my T285M , I hated Touchwiz so much, now all we need is root. see if these tell you anything.
Click to expand...
Click to collapse
UPDATE: I was able to get the 3/10 stock factory rom flashed without changing the pit. Replaced the hidden.img file in this rom with a renamed copy of the boot.img from the same rom. Flashing does fail in the very end, but it completes before failing so I simply rebooted immediately into Odin mode again to flash jedid's debloated system.img for the T285. Done this a couple times now and the device comes up just fine. About device and Phone Info Samsung confirm it is running the 3/10 build.
Bad news is the bootloader is locked in this build too. No hope unless someone can do something with the source. See prior post.
is open source same for t280? i have 280 not 285
klemen241 said:
is open source same for t280? i have 280 not 285
Click to expand...
Click to collapse
not sure how having the kernel source would help since we can't even change the kernel on the device which is kinda awkward for samsung. Besides I remember ashyx having compilation issues with spreadtrum kernel sources by samsung and not just for this device.
TopTongueBarry said:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=t285m
---------- Post added at 02:46 AM ---------- Previous post was at 02:36 AM ----------
UPDATE: I was able to get the 3/10 stock factory rom flashed without changing the pit. Replaced the hidden.img file in this rom with a renamed copy of the boot.img from the same rom. Flashing does fail in the very end, but it completes before failing so I simply rebooted immediately into Odin mode again to flash jedid's debloated system.img for the T285. Done this a couple times now and the device comes up just fine. About device and Phone Info Samsung confirm it is running the 3/10 build.
Bad news is the bootloader is locked in this build too. No hope unless someone can do something with the source. See prior post.
Click to expand...
Click to collapse
I remember flashing an earlier build thinking the same thing and yep the bootloader is still locked. Aside from that I ran kingroot to see if there was anything exploitable... did'nt work. What I haven't tried is to see if superuser is disabled in this kernel though.
jedld said:
After some work I've managed to debloat my Galaxy Tab A(6) 7.0 LTE (SM-T285/T280). We all know that with a locked bootloader we
can at least do customizations with the system partition:
Here is a simple guide with hopes that more people with the device can continue to allow for more ROM customizations:
Tools/Requirements:
================
- Ubuntu as my OS
- make sure you have adb installed and running (See the android developers guide on how to do this)
- Heimdall 1.4.1
- A copy of the stock firmware zip from samsung for your device
- 7zip to be able to unzip the firmware from above
- Android AOSP fsutils simg2img and make_ext4fs (Attached) (note that your make_ext4fs needs to be patched to be able to generate samsung patches easily see gist) for some reason samsung chose to use a slightly different sparse file layout for this device. Using the stock make_ext4fs to generate an image will cause heimdall ( ad Odin) to stop data uploads after the first packet stream.
Or if you still want to use stock make_ext4fs you can try using Chainfire's sgs4ext4fs and run this after you generate your system.img, I haven't tried this route personally myself.
Step By Step (Part 1 - Mount stock system.img for modification)
==========
1. Create a folder to do your work like samsing_kitchen for example. Place your
stock firmware package there
Code:
mkdir samsung_kitchen
cd samsung_kitchen
2. Extract your stock firmware's system.img using 7zip
Code:
7z x XTC-T285XXU0APCN-20160421170750.zip
7z x T285XXU0APCN_T285OLB0APC6_T285XXU0APCN_HOME.tar.md5
Should see a couple of image files, one of them is system.img.
3. Create mount point and convert from sparse image to mountable image and then mount it
Code:
mkdir system
simg2img system.img system.img.raw
sudo mount -t ext4 -o loop system.img.raw ./system
The contents of the system image should now be visible inside the system folder you
just created. You can now proceed to modifiying it (e.g. remove apps)
(Part 2 - Repackage image for flashing to device)
=================================================
DISCLAIMER: As always make sure you backup your important files in case
something goes wrong! I will not be responsible for any losses resulting from this
activity. Also this activity may void your warranty.
Prequisites:
- Make sure you have heimdall properly working.
- Make sure you have oem unlock. This should be visible in developer settings
To know if it is enabled/disable FRP protection should be disabled when you go
in Odin mode.
1. pull the file_contexts file from .your device.
Code:
adb pull file_contexts
on a connected device in developer mode. You will need this file so that the permissions are properly set when building the image
2. Exit from system back to your working folder (e.g. samsing_kitchen ) and run
the following:
Code:
sudo make_ext4fs -s -l 2147483648 -S file_contexts -a system new_system.img ./system
This should create a flashable image called new_system.img
3. Restart your SM-T285 into Odin Mode (Power-off, then hold home vol-down + power until Odin Mode shows up)
4. Flash using Heimdall
Code:
heimdall flash --SYSTEM new_system.img
Your device should automatically restart after this. If something goes wrong you can always flash the original system image back.
Making an ODIN flashable image
----------------------------------------
To create an image compatible with ODIN (tar.md5) make sure you have a copy of the stock image zip from samsung and extract (using 7zip) its contents to a folder:
An extracted file should look like this:
Code:
boot.img
cache.img
hidden.img
nvitem.bin
recovery.img
SPRDCP.img
SPRDGDSP.img
SPRDLTEDSP.img
SPRDWDSP.img
system.img
replace the stock system.img with the one you created from above:
Code:
cp ../new_system.img system.img
tar and md5 it:
Code:
tar -H ustar -c boot.img cache.img hidden.img recovery.img SPRDCP.img SPRDGDSP.img SPRDLTEDSP.img SPRDWDSP.img system.img >T285_CUSTOM.tar
md5sum -t T285_CUSTOM.tar > T285_CUSTOM.tar
mv T285_CUSTOM.tar T285_CUSTOM.tar.md5
Optionally Zip it if you want:
Code:
7z a T285_CUSTOM.zip T285_CUSTOM.tar.md5
This guide should work for the T280 as well, though I can't confirm it since I don't have access to that model.
Click to expand...
Click to collapse
Anyway to do this on a windows machine?????
lohtse said:
Anyway to do this on a windows machine?????
Click to expand...
Click to collapse
Not sure though since you need to be able to mount an ext4 image, make modifications to it and then write it back. Plus the tools required to write the image back properly are only available in linux so I doubt there will be one for windows unless someone puts in effort to make something for it. The best I can do is to make a docker image where you can run it under windows with those tools if anyone is interested.
Just a note regarding the guide, it's not really necessary to add all the other partition images when creating the ODIN flashable tar.
All that is required is:
tar cvf system.tar system.img
jedld said:
Not sure though since you need to be able to mount an ext4 image, make modifications to it and then write it back. Plus the tools required to write the image back properly are only available in linux so I doubt there will be one for windows unless someone puts in effort to make something for it. The best I can do is to make a docker image where you can run it under windows with those tools if anyone is interested.
Click to expand...
Click to collapse
is there no way to create a set of files(zip etc) we windows users could flash using odin? would be a huge help if that could be done! also anyone have a link to a stock rom??
and finally I noticed that the US samsung site has a pdf manual for this tablet that refers to marshmallow!!!!!
http://www.samsung.com/us/business/support/owners/product/SM-T280NZWAXAR
lohtse said:
is there no way to create a set of files(zip etc) we windows users could flash using odin? would be a huge help if that could be done! also anyone have a link to a stock rom??
and finally I noticed that the US samsung site has a pdf manual for this tablet that refers to marshmallow!!!!!
http://www.samsung.com/us/business/support/owners/product/SM-T280NZWAXAR
Click to expand...
Click to collapse
I highly doubt this thing will get mm. [emoji52]
Unroot Galaxy Note 5 SM-N902i (XSA Australia) with Heimdall - "System UI has stopped"
Hi all,
I am running a linux machine and trying to unroot my Galaxy Note 5. I've downloaded the lastest firmware from sammobile: N920IDVU4CRG1_N920IXSA4CRG1_XSA.zip which extracts to:
boot.img
cache.img
cm.bin
hidden.img
modem.bin
recovery.img
sboot.bin
system.img
Then I've been trying to use heimdall like so:
heimdall flash --verbose --BOOTLOADER sboot.bin --CM cm.bin --BOOT boot.img --RECOVERY recovery.img --RADIO modem.bin --SYSTEM system.img --CACHE cache.img --HIDDEN hidden.img
The process finishes successfully but then when the phone reboots it hangs with an error: "System UI has stopped"
I've previously executed heimdall print-pit to check the pit list. I noticed that there are more pit entries than the 8 provided in the firmware. I don't know if that's normal.
I also tried using the pit file found on the forum with the same negative result: forum/threads/30106-galaxy-note-5-(-N920-)-pit-files
heimdall flash --pit NOBLELTE_AUS_XSA.pit --verbose --BOOTLOADER sboot.bin --CM cm.bin --BOOT boot.img --RECOVERY recovery.img --RADIO modem.bin --SYSTEM system.img --CACHE cache.img --HIDDEN hidden.img
Same error.
Is there something that I've been missing or done wrong?
Many thanks
I honestly don't know what Heimdall is, but I would recommend something else. I bet you rooted that phone with Odin, right? If so, try this tutorial.
https://galaxynote5root.com/galaxy-note-5-unroot/how-to-unrootunbrick-galaxy-note-5-2/amp/
If that did not work, try flashing the factory room using your Custom Recovery tool. If you haven't flashed one yet, you should flash TWRP. (Using Odin, go figure)
Hi, thx for your answer. I did not use Odin to root my phone but "adb" since I m on Linux. That said I have now installed Odin on a windows 7 virtual machine on VirtualBox. I followed the Odin procedure. It ended up successfully finishing the procedure but then same thing happened on boot: "System UI has stopped".
But there is something in the video in the page you suggested that gave me a clue: he mentioned clearing all the data on your phone. So I flashed twrp using adb, deleted manually all the data. Then I used heimdall again to flash the firmware and it worked! It would have also worked with Odin. I m happy
Hello, I have this S3 Mini GT-i8200 that got bricked by flashing the wrong firmware accidentally and I've been searching for a way to unbrick it, After a lot of googling I found two methods, an Unbrick IMG and flashing the scatter loading file, unfortunately, that's something that it's not present inside the .tar.md5 files of the stock rom (list of files down below), so anyone has that scatter loading file that can share me?
Thanks.
Spoiler
LIST OF FILES ON EACH .TAR.MD5
Bootloader:
DTim.Primary
DTim.Recovery
loke_1st.bin
loke_2nd.bin
obm.bin
param.lfs
timh.bin
Code:
boot.img
DTim.Primary
DTim.Recovery
loke_1st.bin
loke_2nd.bin
NVM.img
obm.bin
param.lfs
recovery.img
system.img
timh.bin
userdata.img
CSC:
cache.img
Golden.pit
hidden.img
Modem:
radio.img
Rypley_2 said:
Hello, I have this S3 Mini GT-i8200 that got bricked by flashing the wrong firmware accidentally and I've been searching for a way to unbrick it, After a lot of googling I found two methods, an Unbrick IMG and flashing the scatter loading file, unfortunately, that's something that it's not present inside the .tar.md5 files of the stock rom (list of files down below), so anyone has that scatter loading file that can share me?
Thanks.
Spoiler
LIST OF FILES ON EACH .TAR.MD5
Bootloader:
DTim.Primary
DTim.Recovery
loke_1st.bin
loke_2nd.bin
obm.bin
param.lfs
timh.bin
Code:
boot.img
DTim.Primary
DTim.Recovery
loke_1st.bin
loke_2nd.bin
NVM.img
obm.bin
param.lfs
recovery.img
system.img
timh.bin
userdata.img
CSC:
cache.img
Golden.pit
hidden.img
Modem:
radio.img
Click to expand...
Click to collapse
I couldn't give a better advice as here:
Scatter file for Samsung Galaxy S3 mini
Can anyone guide me . I am looking for a scatter file for the original firmware for the Samsung S 3 Mini GT i8200L. The phone is unlocked.
forum.xda-developers.com
Hello guys. I failed several times rooting this device and finally managed to root.
You need to extract AP tar and then replace the boot.img with a magisk patched one.
You then need to re tar the file using 7zip and flash as normal.
AP CSC HOME CSC and BL
If there's enough demand I'll write a proper guide. Also if soft bricked you need to press both volume buttons and plug in usb at right point on restart.
jameswalker457 said:
Hello guys. I failed several times rooting this device and finally managed to root.
You need to extract AP tar and then replace the boot.img with a magisk patched one.
You then need to re tar the file using 7zip and flash as normal.
AP CSC HOME CSC and BL
Click to expand...
Click to collapse
Thanks @jameswalker457
Which one did you use CSC_HOME or CSC?
When I run with CSC, I get a 'fail' in ODIN However, it does run with CSC_HOME, BL and the patched AP - but it doesn't actually root the device.
Greatful for your help.
Thanks
Used BL AP (with patched boot.img) CSC and HOME_CSC in the userdata
kevinsims said:
Thanks @jameswalker457
Which one did you use CSC_HOME or CSC?
When I run with CSC, I get a 'fail' in ODIN However, it does run with CSC_HOME, BL and the patched AP - but it doesn't actually root the device.
Greatful for your help.
Thanks
Click to expand...
Click to collapse
See above. Missed the quotation
I'm not sure why we need a third thread for this:
SM-X200 root failed...
It's now a bricked tablet after a boot loop, I think should wait to magisk get an update. It won't power on or charge I think. I have two days trying to power on in several times and many key conbinations. No Samsung logo or something. Can I do...
forum.xda-developers.com
The best way to root samsung tab a8 2021 pls
Android 11 I got fast as f boot loop solution below btw An 4 gamers I got fps/ping boost solution below to
forum.xda-developers.com
I still do not have root. What I did:
1. unlocked bootloader
2. install magisk manager 24.3
3. Download X200XXU1AVC1 from Samfw
4. unzip the firmware
5. Untar the AP tar file
6. Extract boot.img, send to device, and patch with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
7. Replace boot.img with the newly patched one (renamed to boot.img)
8. Create a tar file from the AP folder using
" tar -C AP_folder -cvf AP_patched.tar ."
9. "adb reboot bootloader" to download mode
10. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar
9. Flash via Odin, exit download mode, enter stock recovery, factory reset
For some reason I can't get from download mode to recovery w/o first booting the fresh android.
No boot loop, but no root either.
These are the file names I got from Samfw:
AP_X200XXU1AVC1_CL23784803_QB49828201_REV00_user_low_ship_MULTI_CERT_meta_OS11.tar.md5
BL_X200XXU1AVC1_CL23784803_QB49828201_REV00_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_OMC_XAR_X200XAR1AVC1_CL23784803_QB49838021_REV00_user_low_ship_MULTI_CERT.tar.md5
The md5sum of the files:
AP stock: fa97e5cee1deaf26175b27d26df94266
AP patched: 006b12f713fc3caa127bc5cba01ae4b9
BL: 2172ca468462a46917d78e94157aed54
HOME_CSC: 5ede57b9ffe8059f3166dd5de6ef8721
The tar file worried me. It had file names like ./boot.img instead of boot.img. So I created a new file, with the patched boot.img, this way:
cd AP_folder
tar -cvf ../AP_patched.tar *
Then flashed that. Took longer than the previous tar.
On reboot, it asks me to press PWR to accept boot loader unlocked. Then a splash screen saying: unapproved software, then a few boot loops.
I got to recovery, factory reset, the tablet does the LONG boot, does the initial setup thing.
Install Magisk Manager, and root! Google Play still works.
Whoopee! I can now wait for a working TWRP.
jameswalker457 said:
Hello guys. I failed several times rooting this device and finally managed to root.
You need to extract AP tar and then replace the boot.img with a magisk patched one.
You then need to re tar the file using 7zip and flash as normal.
AP CSC HOME CSC and BL
Click to expand...
Click to collapse
Hello, I have a problem/doubt. I have the files AP, BP... etc I use 7zip to extract the boot.img ..... if I unzip all the AP XXX.tar.md5 the 7zip warns me that there is data after the file, it warns me of an error and at the end it stops in the fota . ...when I replace the boot.img in the AP folder by the one corresponding to the patched with Magisk and use the 7zip again to create the .tar the file does not work with ODIN...I do not know what step or mistake I make. Regards
PS: I'm extracting the files instead of unzipping the .tar.md5 to see if that's the problem ....
PS: Root! Thanks Jameswalker457 Cheers! ....
Translated with www.DeepL.com/Translator (free version)
IkeGolden said:
Hello, I have a problem/doubt. I have the files AP, BP... etc I use 7zip to extract the boot.img ..... if I unzip all the AP XXX.tar.md5 the 7zip warns me that there is data after the file, it warns me of an error and at the end it stops in the fota . ...when I replace the boot.img in the AP folder by the one corresponding to the patched with Magisk and use the 7zip again to create the .tar the file does not work with ODIN...I do not know what step or mistake I make. Regards
PS: I'm extracting the files instead of unzipping the .tar.md5 to see if that's the problem ....
PS: Root! Thanks Jameswalker457 Cheers! ....
Translated with www.DeepL.com/Translator (free version)
Click to expand...
Click to collapse
> if I unzip all the AP XXX.tar.md5
That is because a .tar.md5 is a tar file with an md5 concatenated to it.
> use the 7zip again to create the .tar the file does not
The proper tool to create .tar files is "tar".
>PS: I'm extracting the files instead of unzipping the .tar.md5 to see if that's the problem ....
Care to be more specific on how you did that?
>PS: Root! Thanks Jameswalker457 Cheers! ....
Good news.
Have root my SM-X205 (LTE) for 1 Feb Patch level but no go with latest May update.
Getting constant boot loop (exactly same process, magisk boot.bin etc) so rolled back to Feb for now.
lufee84 said:
Have root my SM-X205 (LTE) for 1 Feb Patch level but no go with latest May update.
Getting constant boot loop (exactly same process, magisk boot.bin etc) so rolled back to Feb for now.
Click to expand...
Click to collapse
What firmware version worked, and which failed?
X200XXU1AVC1 worked for me.
Yes, X205XXU1AVC1 works.
No luck with latest X205XXS1AVE1 (May Patch).
garyemiller said:
I'm not sure why we need a third thread for this:
SM-X200 root failed...
It's now a bricked tablet after a boot loop, I think should wait to magisk get an update. It won't power on or charge I think. I have two days trying to power on in several times and many key conbinations. No Samsung logo or something. Can I do...
forum.xda-developers.com
The best way to root samsung tab a8 2021 pls
Android 11 I got fast as f boot loop solution below btw An 4 gamers I got fps/ping boost solution below to
forum.xda-developers.com
I still do not have root. What I did:
1. unlocked bootloader
2. install magisk manager 24.3
3. Download X200XXU1AVC1 from Samfw
4. unzip the firmware
5. Untar the AP tar file
6. Extract boot.img, send to device, and patch with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
7. Replace boot.img with the newly patched one (renamed to boot.img)
8. Create a tar file from the AP folder using
" tar -C AP_folder -cvf AP_patched.tar ."
9. "adb reboot bootloader" to download mode
10. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar
9. Flash via Odin, exit download mode, enter stock recovery, factory reset
For some reason I can't get from download mode to recovery w/o first booting the fresh android.
No boot loop, but no root either.
Click to expand...
Click to collapse
Not sure if this helps but i read an article that says you should patch the whole AP tar file rather than extract just the boot.img. Maybe because it patches the recovery and super etc img files too? I havet tried this yet as I cant even get my bootloader unlocked
dan.langridge88 said:
Not sure if this helps but i read an article that says you should patch the whole AP tar file rather than extract just the boot.img. Maybe because it patches the recovery and super etc img files too? I havet tried this yet as I cant even get my bootloader unlocked
Click to expand...
Click to collapse
Dunno where you read that, don't care. This works (as above):
1. unlocked bootloader
2. install magisk manager 24.3
3. Download X200XXU1AVC1 from Samfw
4. unzip the firmware
5. Untar the AP tar file
6. Extract boot.img, send to device, and patch with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
7. Replace boot.img with the newly patched one (renamed to boot.img)
8. Create a tar file from the AP folder using
" cd AP_folder"
" tar -cvf AP_patched.tar ."
9. "adb reboot bootloader" to download mode
10. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar
9. Flash via Odin, exit download mode, enter stock recovery, factory reset
Note the fixed "tar" command. Do not use "tar -C".
garyemiller said:
Dunno where you read that, don't care. This works (as above):
1. unlocked bootloader
2. install magisk manager 24.3
3. Download X200XXU1AVC1 from Samfw
4. unzip the firmware
5. Untar the AP tar file
6. Extract boot.img, send to device, and patch with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
7. Replace boot.img with the newly patched one (renamed to boot.img)
8. Create a tar file from the AP folder using
" cd AP_folder"
" tar -cvf AP_patched.tar ."
9. "adb reboot bootloader" to download mode
10. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar
9. Flash via Odin, exit download mode, enter stock recovery, factory reset
Note the fixed "tar" command. Do not use "tar -C".
Click to expand...
Click to collapse
OK, I've un-tarred the AP tar.md5 and patched the old boot-img file on the device, renamed it and replaced the original boot.img in the AP "folder".
Steps 8 & 9 are a little confusing for me, if you could expand on those. Can I use 7zip to re-tar? Those look like DOS commands in step 8.
Ar-Pharazon said:
OK, I've un-tarred the AP tar.md5 and patched the old boot-img file on the device, renamed it and replaced the original boot.img in the AP "folder".
Steps 8 & 9 are a little confusing for me, if you could expand on those. Can I use 7zip to re-tar? Those look like DOS commands in step 8.
Click to expand...
Click to collapse
Slightly expanded:
1. unlocked bootloader
2. install magisk manager 24.3 on the tablet
3. Download X200XXU1AVC1 firmware from Samfw onto PC
4. unzip the X200XXU1AVC1 firmware zip file
5. Make a directory for the AP tar contents
"mkdir AP"
6. Untar the AP tar file into directory AP, all on one line:
"tar -xvf AP_X200XXU1AVC1_CL23784803_QB49828201_REV00_user_low_ship_MULTI_CERT_meta_OS11.tar.md5 -C AP"
7. Change the current directoy to the AP directory:
"cd AP"
8. Using adb send boot.img, to the tablet,.
9. Patch boot.img with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
10. Using adb copy magisk_patched-24300-9Iez2.img from the tablet and into the AP directory.
11. Rename magisk_patched-24300-9Iez2.img to boot.img:
"mv magisk_patched-24300-9Iez2.img boot.img"
12 Create a tar file from the AP directory Note the space and period(".") after ".tar":
" tar -cvf AP_patched.tar ."
13. Use adb on PC to enter download mode on tablet:
"adb reboot bootloader"
14. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar as files to be flashed.
15. Flash via Odin, exit download mode, enter stock recovery, factory reset
How about that?
garyemiller said:
Slightly expanded:
1. unlocked bootloader
2. install magisk manager 24.3 on the tablet
3. Download X200XXU1AVC1 firmware from Samfw onto PC
4. unzip the X200XXU1AVC1 firmware zip file
5. Make a directory for the AP tar contents
"mkdir AP"
6. Untar the AP tar file into directory AP, all on one line:
"tar -xvf AP_X200XXU1AVC1_CL23784803_QB49828201_REV00_user_low_ship_MULTI_CERT_meta_OS11.tar.md5 -C AP"
7. Change the current directoy to the AP directory:
"cd AP"
8. Using adb send boot.img, to the tablet,.
9. Patch boot.img with magisk 24.3. Patched boot is magisk_patched-24300-9Iez2.img
10. Using adb copy magisk_patched-24300-9Iez2.img from the tablet and into the AP directory.
11. Rename magisk_patched-24300-9Iez2.img to boot.img:
"mv magisk_patched-24300-9Iez2.img boot.img"
12 Create a tar file from the AP directory Note the space and period(".") after ".tar":
" tar -cvf AP_patched.tar ."
13. Use adb on PC to enter download mode on tablet:
"adb reboot bootloader"
14. open Odin v3.14.1 and add BL, HOME_CSC, and the AP_patched.tar as files to be flashed.
15. Flash via Odin, exit download mode, enter stock recovery, factory reset
How about that?
Click to expand...
Click to collapse
I'm guessing those are Linux commands?
In any event, I made 7zip re-tar the AP folder with the patched boot.img, but it ends in .tar.tar
Is this an issue, or should/can it be renamed .tar.md5 like the original?
Ar-Pharazon said:
I'm guessing those are Linux commands?
In any event, I made 7zip re-tar the AP folder with the patched boot.img, but it ends in .tar.tar
Is this an issue, or should/can it be renamed .tar.md5 like the original?
Click to expand...
Click to collapse
I do them on Linux, but they can also work on WinBlows. Since I do not use M$ products, I can only say I've seen those commands work on WinBlows, but can't say how to set that up.
I also can't help you with 7zip, it can run on Linux, but never use it myself.
People have problems when they don't use "real" tar, so don't. Save yourself the pain.
You do not need to convert the .tar to a .tar.md5. Odin will use either file type. A .tar.md5 file is a .tar file with its md5 hash appended. Odin can use the file to verify the .tar integrity, but that is optional.