Related
Ainur JamesDSP is now available in Magisk Manager. Thanks to the devs for their great work. Enjoy!
Not working on pixel xl with magisk 14.3. Repeatedly showing the app has shut down unexpectedly. And then my system started an automatic factory wipe (good thing I forced shut down before the wipe started)
biribiribiri said:
Not working on pixel xl with magisk 14.3. Repeatedly showing the app has shut down unexpectedly. And then my system started an automatic factory wipe (good thing I forced shut down before the wipe started)
Click to expand...
Click to collapse
Yikes. I wonder if AML doesn't support Pixel yet. I will look into it and add a note to the OP. Thanks for the heads up.
biribiribiri said:
Not working on pixel xl with magisk 14.3. Repeatedly showing the app has shut down unexpectedly. And then my system started an automatic factory wipe (good thing I forced shut down before the wipe started)
Click to expand...
Click to collapse
By the way, were you running any other audio mods at the time?
s8m said:
By the way, were you running any other audio mods at the time?
Click to expand...
Click to collapse
no
I am getting a blank screen when opening jamesDSP upon flashing and rebooting. Then if I got to recovery and wipe cache and dalvik and reboot it just does a constant FC, over and over. I provided a log through ADB. I am running ABC ROM, Android O, Angler. As you can also see I have audmodlib and ainur audio as well. Also, before I wiped cache and dalvik and the JamesDSP screen was just blank it did show in notification. Basically, Not working at all here. Thanks for the work bud. The first link is the constant FC with ADB, and the second link is Matlog with the blank JamesDSP screen when opening.
https://haste.blamealexcruz.com/WoNVF1m7XX.swift
https://haste.blamealexcruz.com/8EdpzPLtrU.pl
yung40oz84 said:
I am getting a blank screen when opening jamesDSP upon flashing and rebooting. Then if I got to recovery and wipe cache and dalvik and reboot it just does a constant FC, over and over. I provided a log through ADB. I am running ABC ROM, Android O, Angler. As you can also see I have audmodlib and ainur audio as well. Also, before I wiped cache and dalvik and the JamesDSP screen was just blank it did show in notification. Basically, Not working at all here. Thanks for the work bud. The first link is the constant FC with ADB, and the second link is Matlog with the blank JamesDSP screen when opening.
https://haste.blamealexcruz.com/WoNVF1m7XX.swift
https://haste.blamealexcruz.com/8EdpzPLtrU.pl
Click to expand...
Click to collapse
Thanks - very helpful! Looking quickly at your logcat this may be related to libjamesDSPImpulseToolbox.so being placed inside /system/lib/ instead of /system/lib64/ (my device is ARM64 but accepts /system/lib/). I'll look into a workaround and update this in next build.
s8m said:
Thanks - very helpful! Looking quickly at your logcat this may be related to libjamesDSPImpulseToolbox.so being placed inside /system/lib/ instead of /system/lib64/ (my device is ARM64 but accepts /system/lib/). I'll look into a workaround and update this in next build.
Click to expand...
Click to collapse
Great! Looking forward to it.
When users provide logs...
I already submitted this to the repo. Why are you posting our module as yours? V1.1 is BETA. There's a reason why it is unreleased.
Please have this thread removed. You're going to cause issues for other users, which is already happening.
ahrion said:
I already submitted this to the repo. Why are you posting our module as yours? V1.1 is BETA. There's a reason why it is unreleased.
Please have this thread removed. You're going to cause issues for other users.
Click to expand...
Click to collapse
I'm confused... this is built off a fork of your AM3D repo but my fork is not your repo. V1.1-beta is the version I created. Like the OP says I created this module, combining your AML/Unity framework and james34602's JamesDSPManager.
If you are working on a JamesDSPManager module that is news to me (hence why I made this module). If you are working on a module that is also v1.1-beta that is quite a coincidence! Are you saying you don't want other devs building off of your AML library and sharing with the community? I thought that was welcome (you are planning a template after all) but I will remove this module if you would rather control development.
s8m said:
I'm confused... this is built off a fork of your AM3D repo but my fork is not your repo. V1.1-beta is the version I created. Like the OP says I created this module, combining your AML/Unity framework and james34602's JamesDSPManager.
If you are working on a JamesDSPManager module that is news to me (hence why I made this module). If you are working on a module that is also v1.1-beta that is quite a coincidence! Are you saying you don't want other devs building off of your AML library and sharing with the community? I thought that was welcome (you are planning a template after all) but I will remove this module if you would rather control development.
Click to expand...
Click to collapse
Ahhhh. I didn't check the GitHub repo. I thought you just built the thread with my GitHub repo (which I submitted through Magisk).
That's so weird lol.
You're good then, but using the latest sources will cause things to be wonky with the current stable version of the other mods. It will cause FC all day.
False alarm. Sorry about that! I'm still gonna make a thread for this however.
ahrion said:
Ahhhh. I didn't check the GitHub repo. I thought you just built the thread with my GitHub repo (which I submitted through Magisk).
That's so weird lol.
You're good then, but using the latest sources will cause things to be wonky with the current stable version of the other mods. It will cause FC all day.
False alarm. Sorry about that! I'm still gonna make a thread for this however.
Click to expand...
Click to collapse
OK no worries! That's a good point that using unreleased sources can cause other unwanted problems. I will take this down if you are creating a separate thread. It's probably better for everyone if you are able to manage the development of AML modules.
s8m said:
OK no worries! That's a good point that using unreleased sources can cause other unwanted problems. I will take this down if you are creating a separate thread. It's probably better for everyone if you are able to manage the development of AML modules.
Click to expand...
Click to collapse
It's up to you man. I submitted the stuff yesterday to the Magisk repo, along with a V4A as well as Unity Xposed.
Since you're looking from outside, in. Was Unity easy to configure for you? The entire point for AML is to link everything to together for Magisk. Then we created Unity to be an all in one installer. Any AML modules are encouraged and welcome. Ainur is running AML currently.
Yeah I must say Unity is really well done. I've only ever done very simple Magisk modules (for personal use) so I may not be the best judge, but there wasn't much learning curve at all with Unity. The way the patching and multi-arch handling is set up is really intuitive and logical. This module was really simple to create compared to your ViPER4Android module but it was nice not to have to think about modifying the install-binary or add custom sed commands. All in all - #impressed !
s8m said:
Yeah I must say Unity is really well done. I've only ever done very simple Magisk modules (for personal use) so I may not be the best judge, but there wasn't much learning curve at all with Unity. The way the patching and multi-arch handling is set up is really intuitive and logical. This module was really simple to create compared to your ViPER4Android module but it was nice not to have to think about modifying the install-binary or add custom sed commands. All in all - #impressed !
Click to expand...
Click to collapse
Awesome. You can thank @Zackptg5
Another addition is SETools-inject for Android, that functions like sepolicy inject that MagiskSU/SuperSU have. Essentially, it allows rootless and other forms of root to also use it via init.d. As of yet, no one has actually used SETools for this.
We've also added init.d patching, for rootless and other root methods. Essentially, ramdisk will be automatically patched for AML system modules to use init.d (even if your rom didn't support it before). So init.d patch for all Android versions, MM/N+, has been added. Currently nearly all (if not all) init.d support is broken.
ahrion said:
I already submitted this to the repo. Why are you posting our module as yours? V1.1 is BETA. There's a reason why it is unreleased.
Please have this thread removed. You're going to cause issues for other users, which is already happening.
Click to expand...
Click to collapse
I hope your mod will be in the repo soon, topjohnwu has been very picky with your soubd mods.
24imelqui said:
I hope your mod will be in the repo soon, topjohnwu has been very picky with your soubd mods.
Click to expand...
Click to collapse
It's not that he has been picky. It's just it takes some time to get approved.
Topjohnwu is a busy man.
BTW, Unity allows system mode installation natively if Magisk is not installed, includes addon..d as well.
Magisk is not required for any Unity zips.
ahrion said:
It's up to you man. I submitted the stuff yesterday to the Magisk repo, along with a V4A as well as Unity Xposed.
Click to expand...
Click to collapse
It may be a dumb question, but does your Ainur JamesDSP module require Ainur or can it run independently without Ainur installed?
I made this ROM to test my build environment and I thought I would share it with the community in case someone finds it useful.
Find out more about AOKP here: https://aokp.co/
Sources:
Base ROM: https://github.com/aokp
Device trees and kernel: https://github.com/Exynos5433
My thanks to ripee and the exynos5433 team for supporting this tablet. Check out his thread for LineageOS which contains installation instructions and useful utilities which are also applicable to AOKP. https://forum.xda-developers.com/tab-s2/development/rom-lineageos-15-1-t3879302
Here is what you've been waiting for https://androidfilehost.com/?w=files&flid=296203
AOKP has Lineage SU baked in. If you prefer another root solution or don't want root then flash this immediately after flashing the ROM. https://mirrorbits.lineageos.org/su/addonsu-remove-15.1-arm-signed.zip
Heres a new build: latest upstream changes and security update
https://www.androidfilehost.com/?fid=6006931924117894736
thanks.
good to see t815 getting some love
Bug Wifi
With this last rom the wifi connection doesn't turn on, do you have the same problem? What should i do guys?
New builds being uploaded, now also available for the other tab s2 variants.
https://androidfilehost.com/?w=files&flid=296203
Flashed (clean) the latest for 715. I don't see any errors and all is working well... I use WiFi only so I can't confirm cellular data.
Google photos keeps crashing on T815
Google photos keeps crashing +1
T715Y
others work good by now.
Thanks a lot!
Select Google apps package without photos app and install it from play store. Works here! On 715.
Google Photos crashing seems to be an issue with opengapps. If you install the update to Photos from the Play Store, it starts working again.
How different is the T815 variant to the T815Y variant? I have a T815Y, am I able to use this ROM?
I have been using this as a daily driver for my 815 since your first build. thanks @Inkypen !
i took the liberty of forking your roomserice, i wanted to try to make an all in one build. not working so far, the remove frameworks av, didnt work.
ill keep digging. cheers
Tried flashing for the T810 and get error "E3004: This package is for device: gts210wifi,gts210wifixx; this device is ." and it fails.
Edit: Probably has to do with the old TWRP I use. Doesn't support newer versions, so I just edited the updater-script and it worked fine.
BeardKing said:
Tried flashing for the T810 and get error "E3004: This package is for device: gts210wifi,gts210wifixx; this device is ." and it fails.
Edit: Probably has to do with the old TWRP I use. Doesn't support newer versions, so I just edited the updater-script and it worked fine.
Click to expand...
Click to collapse
New twrp has been out for a while.
What mod did you make in the updater script and how.? Just curious to see your work around
New 710 and 815 up
Building 715 check in a little bit if it's uploaded.
Will do 810 after work
tripLr said:
New 710 and 815 up
Building 715 check in a little bit if it's uploaded.
Will do 810 after work
Click to expand...
Click to collapse
Android file host? Can't find new builds?
My build URL
ArtoD2 said:
Android file host? Can't find new builds?
Click to expand...
Click to collapse
Hi all , as i just started building these for myself from @Inkypen 's sources, I thought i would share the google drive link with everyone
tiny.cc/triplr
I will be updating my signiture
Note, I also build for the note 4 and there is some legacy tabs2 stuff im storing
download from the AOKP_oreo folder
thanks !
anyone else having constant (like, every 5 to 10min) drops? wifi stays on, it just disconnects everywhere and I have to manually select a network all the time, or wait a couple of minutes for it to automatically reconn
Dunno
Hi all.
Due to life issues( work )
And aokp not being used too much
I will be discontinuing builds.
Sources are still at
GitHub.com/exynos5433
Best wishes.
What happened to @VR25's modules in the repo? Today I looked but his most excellent modules are gone from the repo. Good thing I downloaded them a few days ago, so I'm wondering if there's a reason for the modules' disappearance?
He didn't have time to update them to the new template before the repo purge. I'm sure he'll update and resubmit when time permits...
The modules will be back.
Don't ignore
VR25 said:
The modules will be back.
Click to expand...
Click to collapse
Sir I am working with a recovery project. I added magisk manager in the recovery by the help of your code. I also gave credit to you. I am asking the permission that can I release the project or I did a wrong step.
Hey xda,
Is there anyone experiencing the inability to install modules from storage?
Installing from the magisk repo work as usual.
+ Posted I. The wrong section. Sorry.
The last several versions of Fox Magisk Module Manager has been crashing for me and the app has no way of reporting issues. And the dev is not on GitHub any longer.
Anyone else having the same problems? Are there any other module managers?
Same here.It just started today
A few weeks ago I was having problems with it. The, I saw on the github page that the project was transferred to a different repo with a different developer. So, I installed the build from the new repo and it work for a while and now it is crashing every time I open it. It does have a report feature now though when it crashes.
The old repo is here: https://github.com/Fox2Code/FoxMagiskModuleManager
Scroll down and they link you to the new repo here:
The new repo is here: https://github.com/Androidacy/MagiskModuleManager
The new one seems to still be having some issues though.
Today it happened here as well and the reporting function is outgreyed. Is there any alternative? It showed strange behaviour: it tried (unsuccessful) to use the camera, check the sensors and asked for tracking
It also stopped working for me and gives me an error...
synesthete said:
A few weeks ago I was having problems with it. The, I saw on the github page that the project was transferred to a different repo with a different developer. So, I installed the build from the new repo and it work for a while and now it is crashing every time I open it. It does have a report feature now though when it crashes.
The old repo is here: https://github.com/Fox2Code/FoxMagiskModuleManager
Scroll down and they link you to the new repo here:
The new repo is here: https://github.com/Androidacy/MagiskModuleManager
The new one seems to still be having some issues though.
Click to expand...
Click to collapse
Hasn't worked for me since v1.1
Last night I installed the latest arm64 v8a build here:
Androidacy Downloads Center
Welcome to the Androidacy downloads web app, your one stop place to download past and present versions of Androidacy software.
www.androidacy.com
This is the site linked from the new GitHub repo. So far, it is working for me.