UPDATED:
Issue has been solved
( i buy 4 credits from dc unlocker and use HCU to read my boot loader code )
yes i know this is all from dc unlockcer yes they , unbrick my P9 but they also
changed the boot code when you flashed the rom via DC phoenix
im suspecting it that way .
Hello guys. Debranded P9 here
Nougat C432B386 Eva-L09
hw eu :country vendor
Bootloader unlocked and FRP lock
my device gets suffer from a hard brick
and recovered by DC Phoenix. In order to
have a Stable Nougat Firmware i decide to
debrand my phone ......
1st attempt : flashing the (.dgkmts AL10 chinese rom)
after flashing the chinese Al10 firmware
from DCUnlocker (.dgkmts) the device boot and
can be flashed into original stock rom
but the first attempt fails because my
vendor comes from a different build
2nd attempt: flashing the (.dgkmts AL10 chinese rom)
but this time, i decide to wipe NVME and OEM
after booting into system and checking my device
details my IMEI stays the same but Serial No is missing
so i had to use HCU to write my IMEI and Serial No.
and obtain a new vendor from hw eu
after booting system, I start to forced update the
EVA-L09C432B136
then i unlocked my bootloader at this stage
using the same bootloader code from Huawei
FIRMWARE:EVA-L09 C432B136
( please focus on this, i already unlocked the bootloader​
here , and allow the oem to unlock )
status : bootloader unlock
frp unlock
the process is successfully done and after that
i check my device details and perfectly debrand
my P9, after a minute it received an OTA update
from Huawei System Updater ( C432B186 )
I update into it and reboot and received another update
again C432B322 ( Nougat-beta version) and then
received the Final Build C432B386
SUMMARY STAGES:
bricked and wiped oem info / SN rewrite using HCU
1. AL10 Chinese rom >
2. C432B136 ( stock firmware)
( do unlocked bootloader )
3. OTA C432B186
4. OTA C432B322 ( Nougat beta )
5. OTA C432B386 ( Nougat Stable)
status : bootloader unlock
frp lock
I'm into that version C432B386
and now im having a trouble here
flashing the original bootloader code
command : fastboot oem unlock xxx-xxxx-xxx
it says : wrong password
failed to write the command
" is it possible to obtain a new bootloader code ?"
i don't know why the boot code changed even though
i use it in unlocking my Bootloader and it succeed
2nd scenario:
when i try to go to developer options and
go to Allow oem unlock
so that i can be able to obtain FRP unlock
but it is greyed out.
" i've read that if you're on Nougat and you are already
in unlocked bootlader, you will have this issue "
the possible way of unlocking FRP is relocked the
bootloader first and the OEM UNLOCK option will
come out.
i guess the solution is finding a new Bootloader code
but "how?" does anyone knows this?
3rd scenario: flashing new recovery
( expecting to have administrative rights )
i try to flash also the twrp nougat version
but it says verification error
command : fastboot flash recovery twrp3.1.0-3-eva.img
failed
i don't want to end up bricking my device again
I'm having a hard time to resurrect this and I don't
want to happen it again, I'm busy with my work so
i have to asked you guys, finding a best way how
to fixed this..
if someone is having a same situation like me
please participate on the thread and or someone who
already fixed this kind of issue please give us information . thank you !
oem info / SN rewrite using HCU
You rewrited the serial number? Yeah I don't know how to help you there...
benjamen50 said:
oem info / SN rewrite using HCU
You rewrited the serial number? Yeah I don't know how to help you there...
Click to expand...
Click to collapse
yes sir , there is HCU Client tool that can re-write Serial Number/IMEI / read bootcode
i use it and replaced the missing Serial Number of my device
vinfrix said:
yes sir , there is HCU Client tool that can re-write Serial Number/IMEI / read bootcode
i use it and replaced the missing Serial Number of my device
Click to expand...
Click to collapse
Imo, If you change serial.no then your unlock code would be different
Try relocking and again unlocking the bootloader.
_Frostplexx_ said:
Try relocking and again unlocking the bootloader.
Click to expand...
Click to collapse
i tried to but the code seems already changed.
FiKsTyLeR said:
Imo, If you change serial.no then your unlock code would be different
Click to expand...
Click to collapse
even if i write the same serial code ?
vinfrix said:
i tried to but the code seems already changed.
Click to expand...
Click to collapse
Dude i am in a similar situation.
I have the bootloader unlocked but frp is locked.
When you relocked and unlocked was the OEM unlock option changeable (not grayed out, no FRP LOCK) again?
revery0 said:
Dude i am in a similar situation.
I have the bootloader unlocked but frp is locked.
When you relocked and unlocked was the OEM unlock option changeable (not grayed out, no FRP LOCK) again?
Click to expand...
Click to collapse
yes if you unlock again it will come out
vinfrix said:
yes if you unlock again it will come out
Click to expand...
Click to collapse
As it turns out, you need to rollback to b182 and then upgrade to N through OTA.
dload b300
dload b182
OTA b386
OEM Unlock, ADB Debugging, USB Debugging
Unlock bootloader
twrp
revery0 said:
As it turns out, you need to rollback to b182 and then upgrade to N through OTA.
dload b300
dload b182
OTA b386
OEM Unlock, ADB Debugging, USB Debugging
Unlock bootloader
twrp
Click to expand...
Click to collapse
why should i rollback ?
Brick Huawei after update oreo
Situation:
Phone LOCKED(Green)
FRP LOCKED(green)
Stock RECOVERY
after boot go ERECOVERY.
How To restore ?
With locked bootloader you have no chance to restore without official Huawei Services via Download in eRecovery or payed services like DC Pheonix tool or FunkyHuawei.
Try the official eRecovery method first. If this doesn't work try it with HiSuite. Your bootloader is locked, that means that it should be possible, because the phone didn't detect any modified files. With modified files or partitions the bootloader won't lock normally.
If you have the code to unlock the bootloader you can search for HWOTA. Its a tool that you can use rebrand the phone. You find loads of guides on here to find out how to get the unlock bootloader code. If you find yourself not able to get the product id, serial number, imei to unlock it you can find it on the box that came. You only really need the imei and you can put it in here (http://www.imei.info/) and get all the other stuff. Then once you have the code you can run the bat in HWOTA and rebrand the phone through its instructions.
can't unlock because FRP LOCK (GREEN).... i was try erecovery method 100% download and failed installation.
Hi, guys. I have a huge problem and I'd appreciate every kind of help.
As I was planning to sell my Huawei P8 lite 2017 phone (PRA-LX1), I've decided to relock the already unlocked bl for warranty reasons.
After relock and factory reset process, the phone does not restart al all, but it gets into eRecovery mode, asking to connect to internet in order to download a new firmware.
But the problem is there is a "getting package info failed" message.
I've tried to enter in fastboot mode, and both BL and FRP are locked (green color)
I have even tried to use the dload method, but update stucks at 5%.
What can I do? I've searched a lot of pages here before I open this thread.
Thanks in advance.
you may have bl unkock code use it
I have the unlock code, but I cannot use it due to locked FRP.
Hello, My Huawei GR3 2017 (PRA-LX2) full brick with FRP and Bootloader lock condition for that I have purchased DC-Phoenix + HCU 3 Days license. I have successfully write phone firmware by DC-Phoenix, but after that flashing in upgrade mode, I get VERLIST partition for that I have to repair Huawei phone country & vendor with HCU but HCU not detecting my phone.
Please help me how I can unbrick it?
hello everyone pls i need a firmware i cant find it i try many other firms but the problem still the same
Checking fastboot device.....OK
Reading info.....OK
Device Model: VOG-L29
Device Firmware: :VOG-L29 12.0.0.139(C431E3R2P2)
Base Firmware: :VOG-LGRP2-OVS 102.0.0.139
Custom Firmware: :VOG-L29-CUST 102.0.0.3(C431)
Preload Firmware: :VOG-L29-PRELOAD 102.0.0.2(C431R2)
Device FB Lock: LOCKED
Device USER Lock: LOCKED
Device Lock: locked
note /
i have eft pro account
unlock tool
thank you
Hi,try to explain your problem with more details