Since I've bought a few different cases, I thought I'd do a roundup of them.
Nillkin Super Frosted Shield Matte:
Minimal case, but with a slight lip around the glass and camera bump protection. Full 360 degree coverage with tight cutouts and good buttons. A very tight, accurate fit; it won't bounce off if you drop it.
Covered with a bump pattern to make it grippy. Hard plastic that will likely crack on dropping.
For: people wanting to reduce the slipperiness of the phone, make the bump look less dumb, and protect from scratches and light drops.
Spigen Liquid Air:
Light by Spigen's chonky boi standards, this gives protection not far off their Rugged Armour series without the goofy carbon fibre accents. Looks good and fits great. Large protection lip around the screen and sufficient camera cover. Tasteful design. Not as grippy as you'd think, but better than just the phone.
For: serial phone-droppers who don't want to make their giant phone any more gigantic. A good compromise case.
Official "sandstone" bumper case:
More rugged than the Super Frosted Shield, but with openings for the rockers, buttons, and top and bottom.
Extremely grippy texture and a tight fit. Good screen lip protection and camera cover. Aesthetically a bit weird; a bit "HTC Desire era" with the big gaps all around. Tasteful OnePlus logo.
Colour and texture of an asteroid space station wall; really needs to have "REMEMBER THE CANT" spray painted on it.
For: official case fans who don't mind paying twice what it's worth (unless you find it on eBay). Daredevils. People who like to click the proper buttons.
All three are good, but if you spend the RRP on the official case, you should go get your face paint on and get to the circus, because you're a clown.
Good write-up ?. Though I tried a couple of cases - both military types and transparent types - I couldn't find any of them good. I still use the official transparent case that came with the phone. I couldn't find any better than this case.
For military types I hate them because of the thick bumper sides that eliminates the bezel-less nature of the phone. Yes the military types meant for that kinda protection but I don't like those cases. For the transparent ones none of them gives that extra bumper for the screen and back camera glass like the official Twitter m transparent case. All of them were sh*ts.
For my old Lenovo Z2 Plus, there were a vast variety of colored back covers with extra screen and back camera bumper protection. I had more than 20 cases in different types and colors. My MiA1 also has more than 10 different cases. Note that these weren't just cheap quality cases with some printed graphics, these were all in plain solid colors. I don't know why case manufacturers of 7T never make such kind of cases.
Two months ago I was planning to make a custom made plastic-printed case with the help of my friend, he has a 3d printer with him. I even made a 3d model of the phone and case in my PC. But due to the pandemic I had to stop the process. Not sure if I can do the further developments.
Sent from my OnePlus7T using XDA Labs
I’ve never understood why “military grade” is considered a selling point. Have these people never met someone who was in the military? Everything’s made by the lowest bidder!
I agree with the lack of case options. I don’t think the OnePlus 7T sold all that well or something, it’s disappointing.
I got my 7T used and it came with three official cases. I'll add to your list, if you don't mind.
Karbon Protective Case:
This case is just like the Sandstone in that the buttons, slider and top/bottom are exposed. The feel is interestingly rubbery, but a bit slippery. It is very thin and almost looks like a skin until you look closer. Not that it is that thin, but fits so well. It's so thin it adds nearly no weight. The OnePlus logo is far more pronounced than the Sandstone, and really pops being so silvery-white. It makes me wish the Sandstone had a silver/white logo, it's that good.
Sandstone Protective Case:
Basically everything you said. The grip is incredible and you will be hard-pressed to drop your phone unless you're being careless. An improvement over the 5T Sandstone as the texture is slightly better. My go-to case, really.
Red Silicone Bumper Case:
This thing is pure red. Wow, that red! It is noticeably more bulky than the Karbon and Sandstone. There is no lip for the camera bump because it's bulky enough to clear it. So the back is smooth all the way, no table wobble. The inside of the case is a nice suade. It actually is an awesome premium touch, and you feel good to know your phone is safe from even case scratches, lol. Covers all buttons, makes the slider a bit more difficult to reach (but not too much), and covers all the way around the top and bottom, leaving ample holes for the microphone, charging port and bottom speaker. There is an ample lip all the way around. The feel is similar to the Karbon but more grippy. Softer feeling. The logo is understated and just recessed in the silicone.
All of these cases feel very premium (to me) and the fit is so perfect I think they're worth the investment. Especially if they last as long as my Sandstone from the 5T I used since launch.
Update: I've been using the official Sandstone case as my daily driver for nearly four months now. I've had a bunch of drops from pocket height onto concrete without any damage to the phone, and the case texture hides the dings very well.
Would recommend again.
Related
Full disclosure: I was given this case for free, the vendor is seeking reviews. But, as I've said before, I will give an honest review of a free product regardless. People's feelings be darned.
Product arrived in a timely manner. Packaging was plain, I'm assuming it was non-retail. There were no markings or branding of any kind. No instructions, either. Not that they were really needed I guess, but I would assume that a retail purchase would be packaged, and not arrive in a plain padded envelope.
The case by itself looks, well, clear. Mine is clear with opaque rubber (TPU, Poetic calls it). I guess a model with black TPU is available. I don't want to sound like I'm bashing the case, because I'm not, but it is kind of unremarkable to look at. And I don't think that's a bad thing. After all, this case is designed to show off the phone, not just to show off. And that is apparent when it's actually on the phone. It hugs the shape of the device and doesn't compete for your attention.
The case is made of rigid plastic. Normally, I'm not a huge fan of hard cases, as I feel they can be rough on phones. But, the note 5 has an aluminum frame instead of the Standard issue Samsung chromed plastic. And there is clearish rubber around the frame as well as the lip that goes over the screen. It is along the sides as well. That made me feel better about it being a rigid plastic.
The case is one piece that pops in firmly but easily enough. Let me tell you, this baby is snug! And I mean that in a good way. Takes a little doing to get it out once it's in (again, I hope the retail packaging has instructions, in case there's some "trick" to it). But this thing really hugs the phone tightly. Solid fit. There is a very thin lip over and around the merest edge of the screen which holds the case on. It's a pretty impressive design, because the case basically clips onto the aluminum frame, leaving the entirety of the screen exposed. But there is no fear of the phone popping out of this case.
There is a slight lip that keeps the screen from coming in contact with the table when placed face down. A slight lip, but it is there, even with a glass screen protector on my phone.
It's made of clear polycarbonate with a clearish TPU on the corners, around the screen and in two raised rails running the long way down the back. It is comfortable in the hand, allowing the holder to feel the contours of the phone without adding bulk.
Along the sides, there are upraised ridges for grip. Which is good, because the smooth polycarbonate could feel a bit slippy if not for the TPU rails on the back, rubber around the lip of the case and ridges on the sides. This case has a good, reasonably grippy feel. Those who do not like the feel of smooth plastic against their palm may not dig it, but it feels pretty good to me.
The buttons are perfectly lined up, and very very clicky. One cool thing about the volume buttons: instead of being one big rocker style button for VOL up/down (many cases "join" the two buttons), the Poetic Affinity case keeps them separated just as the phone was designed. It looks sharp and deliberate, and provides some useful tactile feedback.
The TPU around the frame and the rails along the back ensure that your phone will stay put wherever you set it, which is nice.
The ports are almost all lined up perfectly (more on that in a sec). The SPen port seems wide open, which is pretty common for cases of this type. The bottom speaker, instead of being a cutout, is 8 holes drilled or molded or whatever into the case. They don't really line up with the actual speaker holes (at least in mine). But I have tried with and without the case, and I cannot tell any difference in the sound, so it doesn't seem to be a big deal. It isn't to me, anyway. But it will be to someone, which is really the only reason I mention it.
The clear polycarbonate gets smudged up with fingerprints in no time, I wipe mine frequently.
The combination of polycarbonate and strategically placed TPU seems pretty sturdy. I feel like my phone is adequately protected against day to day hazards. The case feels solid, complete and protective. The placement of the TPU seems designed to protect well against average corner drops or flat drops onto the front or back.
In conclusion, if you want a phone case that protects you from everyday hazards, and showcases as it encases, this is a good one to comsider. It is not at all expensive, and seems to offer protection that is definitely a cut above most "budget" cases I have seen. I have mentioned a couple of things that may give some people misgivings about this product (smooth plastic back, misaligned speaker holes), but for me neither of these things is a deal breaker, or even a significant concern. Your mileage may vary, etc. I like this case quite a bit.
Did we really yet another separate thread for this? You could have added it here: http://forum.xda-developers.com/showthread.php?t=3220298
Mods please merge these threads.
Sent from my SAMSUNG-SM-N920A using Tapatalk
Yeah I didnt see that thread sorry all
I have noticed that the TPU gets a little dingy looking and is not easy to clean. I can't imagine that would be a problem with the black TPU, but I have the opaque TPU on mine. Still love the case, still using it, but if I were buying one, I would go with the black TPU.
Just got my poetic affinity case. It's very nice! Love it
True bumper like the one Google sold for the Nexus 4. Just a ring around the phone made of rubber or soft plastic, but nothing on the front or back. Just enough of a lip on both sides to keep the screen or back cover from making impact on a drop.
I've not found any yet, even on aliexpress. We may just have to wait for them.
Someone on reddit said that Evolution Labs is making a Rhino Shield Crash Guard for the 5X. I hope so, because I would prefer just a bumper.
That would be nice. I'm a fan of the bumper. There will be some chinese ones popping up soon too probably.
I hope so. Coming from an N4, I'm definitely not a fan of the sharp edges of the 5X.
Got my 5X today along with the Adopted case. I really like the case, it's made of a flexible rubber like material and is fairly thin. Sort of like a bumper with a thin back.
Having used the case only for 1 day, this is a well made, protective case. Not too thick, but adds a great layer of protection.
I have a white Galaxy Note 5, and the Mint color case looks excellent with it.
The raised bumper on the front keeps it from causing damage when laying face down.
The ridged design on the back is great for gripping without slipping.
The cut outs for S-Pen, charging and earphone are perfect and the button covers work quite easily.
I am extremely satisfied with this case and would recommend it to anyone looking for a good case at a definitely reasonable price.
In the past I owned another case that was similar in design, but the outer layer cracked soon after. I don't see that happening with this case.
The link to the case on Amazon http://www.amazon.com/gp/product/B0130A2VCG?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
There are other colors available.
I'll add my review here as well, I agree with all that catman51 had to say about the case. It's a lightweight case that should be good for average protection. It's not heavyweight protection but adequate for light use.
I have no issues using wireless charging with this case as I have with some other ones. I do not like the volume buttons, I would prefer having a space between them but that's personal preference.
A concern of mine is the back, it's not full dual layer. Where the black is, that's the only layer, and in order to keep the case light that rubber material is very thin. I fear with a decent drop the back of the phone might crack. I could be wrong but you know the thought process when you look at something and question it? That's how the back is.
Outside of that, the case is nice, lightweight and looks decent. It does not interfere with my tempered glass screen protector and doesn't really add any bulk to the phone.
My review...
DISCLAIMER: I received the case as a promotion in exchange for an unbiased review.
The case is solid and is a good value, but personally it's not for me. I'm not a big fan of the gold accents. Not to mention, it looks a bit duller in real life than in the seller's pictures.
The case is very slim and doesn't add too much size to the Note 5. With the phone already being large, it's nice to have a case that's not too bulky. The case also adds some nice grip to the phone--the texture on the back is a nice touch as well. Overall, the Artech 21 feels good in your hands.
The hole cut outs were accurate and it was easy to remove and insert my S-Pen. Just note that some chargers are larger than others and you might have an issue plugging yours in. It works perfectly fine with the OEM Samsung Charger, but at the office I have a long LG charging cable at my desk (see picture) and it didn't fit well.
The buttons were a bit on the mushy side--especially the volume keys. I prefer mine with a bit more feel--I like the click feeling that stock and some other cases have. Personal preference.
Anyway, if you are looking for a slim case and you like gold, this is the case for you...
Any users of this case in this forum? Would you recommend it? Is there a lip above the screen and around the camera for protection?
I use this case with my old Mi5 and have no complaints, fits perfectly, the material is sturdy and feel good in the hands and after 2 years of use it looks like new.
I am considering buying one for my Poco but I think MOFI's case with fabric cover looks better.
Weak Protection.
Thanks for the feedback! Though, no one seems to have answered my question regarding the lip.
If u are talking about this case (https://m.aliexpress.com/item/32919923124.html) then I have used it for 6 months its well built but exposes the top and bottom of the phone, I usually handle my phone pretty well and dont drop it but once I dropped it from approx 3-4ft on marble floor nothing happened to the case or the phone. Talking about the lip there is none, while resting the phone on the table the screen touches the table and there is no gap so my advice is to use a tempered glass along with this case.
I just bought the black one and I'm pretty satisfied. Quality is what you'd expect from Nillkin, top notch. Protection is weak though, and I'm worried if I drop the phone with this case on compared to if I was using the Spigen Rugged Armor. Nevertheless, it is really slim. The Spigen one was so damn bulky and heavy it was painful to use for extended periods of time. There is a bump around the camera module, though no lip in front of the display. Still, can recommend this one to anyone looking for a minimalist and slim case.
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
I switch phones often, but one thing that remains constant is my Pitaka MagEZ cases. Have purchased well over 10 of them at this point. Wouldn't choose any other thin case
PseudoChris said:
From what I've seen so far:
1. Spigen Liquid Air - Seems to have some good grip potential, especially with ridges on the sides. However, the gap around the camera bump is an interesting design choice...
2. Samsung OEM Matte Black Silicone Case - Seems to have a decent grip on the matte finish and very minimal.
3. Pitaka Air or MagEZ Case - While I haven't used them myself, I've heard good things about the grip/feel of the Ipitaka cases.
I'm personally going to try the PItaka MagEZ case when it becomes available (Aug 21st) since I like the idea of having embedded metal so I don't have to stick a scosche metal piece on the back of the case.
Also, just a heads up. According to some initial reviews on the new speck 'grip' cases, they're using a more plastic-feeling material for grips instead of rubberized and people are not happy about it. (I previously used them as well)
Click to expand...
Click to collapse
Does the pitika have a lip to protect the screen? Thanks
magichoward said:
Does the pitika have a lip to protect the screen? Thanks
Click to expand...
Click to collapse
The "Air" series cases generally don't rise above the screen.
They do have a thicker "Pro" series option with a raised lip to protect the screen, bumpers on the corners, etc.
Samsung OEM silicon. Can confirm it has excellent grip
seoulbrova said:
Samsung OEM silicon. Can confirm it has excellent grip
Click to expand...
Click to collapse
The cloth one does as well since there's a slim silicone band along the edge.
zedwards said:
The cloth one does as well since there's a slim silicone band along the edge.
Click to expand...
Click to collapse
Yes I've seen the one the only concern I've read it's a little difficult to remove the spen.. Your thoughts.
I will never choose Pitaka again.
Edges are rough and the upper part could have covered more
But I especially won't because it damaged my Note 10+ because of a defect in the inside of the case that made a grain of sand sized hole in the back of my phone.
Been using the Zizo Bolt on my Note 10+ for over 6 months. Excellent grip, usability and protection.
Kick stand doubles as a grip; either fully retract/extend it to keep from losing it's pins, if not secured in either position they can work their way out in your pocket! No issues with this case otherwise.
The one for the 20 seems to come with a temper glass screen protector; that may not work so well.
That's not present on the one for the 10.
Presumably you can use it without and substitute one one your choice?
Damn the 20's cam has a big bullseye on it... no likey. Buying a good case for the 10+ was very hard early on, no doubt the 20 U will be harder to protect
https://www.zizowireless.com/produc...axy-note-20-ultra-case?variant=32315584282672
magichoward said:
I find most cases get slippery on the sides.
I had speck in the past but it was OK any others that you recommend thanks
Click to expand...
Click to collapse
https://www.amazon.com/JJNUSA-Handmade-Leather-Samsung-Galaxy/dp/B08DXWJSQ1?ref_=ast_sto_dp
you know i never thought trying to find a case was going to leave me so hard pressed. note i do not mind the camera bump one bit. but they could have rounded out the camera hump a bit more. not the corners, but where the surface meets the edges and also they could have slanted the sides a bit more angled. who knows they did pull it off pretty good.
still on the camera bump.
note: with JJNUSA leather case you will be covering the mic on the camera bump. if that is a problem for you look elsewhere for a case.
i have received 200 in incentives to order goodies when i got my phone pre ordered and used it to order a few cases.
cases i ordered:
samsung rugged: bulky, heavy, don't like the texture on the back and flimsy kickstands that shoot off when used
samsung leather case: upgrade from last years, 2g lighter. seamless, but warps at the bottom. good cam protection.
samsun silicon: unsure if food grade safe. and slippery as glass
-other cases-
spigen Rugged Armor: oddly best all tpu case with carbon fiber accents. the back is slippery if trying to reach across the screen. side bumpers have one way slip grip and flimsy. camera is well protected. pen cut out too deep corner exposed but covered. top /bottom bumper good but top may block ear piece. 2g heavier then jjnusa leather
...now my official review of the JJNUSA Handmade Leather Case...
NOTE i used amazon prime
don't let the first pic they have on amazon throw you off, but what bothers me is the video they added to the product and it is of the s20 ultra; the camera lens is so scratched. i am still baffled how they did that. then again we will see in due time, because i can not stand the samsung leather case(which got me hooked on leather cases oddly) it is too slippery. the jjnusa case has tpu sides and saddle leather on back with plastic on the inside that the phone rests on. but i will say the leather on the back is so soft i think it sorta makes up for the lack of suede like the official samsung case has. then again the leather is so thick its' edges pop out the mold a teensy-weensy bit, but i doubt with proper use and not picking at it it will survive for a long time. with the 5% off coupon i also got another 1 usd off(who knows if it was the amazon prime). so for 19.95 it is a steal. most other leather cases are $30+. a steal; why may you say? hold on let me get to the rest of it. if we all remember the lg g4 leather back it was a looker. that was it, because it scratched easily and punctured easily. then we go onto the samsung leather case that scratches easily with minimal show. further more i can not say what that will mean over long term usage with this case from jjnusa. treat it lightly and it should be fine. now back to the leather on the jjnusa case. the leather reminds me of the type you get on a saddle and does not separate from itself. that is a plus. but a minus if the antiquing they use comes off very very easily?, and it does(con or not?) i had a cane that had antiquing and it turned my hands black, but after it leveled out it was fine. you know they always slap so much on to fill in the design that almost certainly more then half they put on will rub off. i have rubbed off some already. hence it would not rub off like wow, i had to use my nail. no way does it show like scratches on the samsung leather case. either way the extra antiquing will no matter what fade away over time and settle down to where it should be. i still think it will look good. at the same time the leather is much more scratch resistant then the latter. and the design and the look really grew on me. now on to the sides. the power button and volume are labeled with symbols and i like it even though i will never look at it. what else i like is that they are tpu like the rest of the sides. the tactile of the buttons are sturdy then again not too stiff not too mushy. then there is a bonus or an achilles heal; you move down the same side as the buttons and find a wrist strap punch out so you can add a wrist strap. have not tested it, seems like it should be worthy of use and not fearing. the bonus is removing the phone from the case, it does not shoot out like it does with the samsung leather case does. still it holds it in better. this is where i tell you that the jjnusa case has way better screen protection that leaves a better feel in the hand. the samsung leather case has a squidgy spongy top and bottom. the bottom is already warped and i never used it; i just put it on a few times and took it off. also a fail for the bottom bumper is the difficulty to remove the spen without nails. the jjnusa case is cut out just right and since it is thinner and more stiffer in a good way you can press your thumb or finger and hear that satisfying click to eject it. with that said the top and bottom bumper are raised higher then the samsung to protect the screen. the samsung case is more flush and flimsy.
i am a happy camper and if it fairs well i will update to 5 stars from 4, but i am really thinking at the price to slap down for another. as we all know leather cases do not last as long as other types
the reason i gave it 4 stars is i never really heard of JJNUSA till i saw them on etsy.com and since they where based in china i thought meh. then i thought to ebay's third party cases and said but leather? does not smell much like leather, oddly that is how saddles with the same type of leather smells. or it could be the antiquing they used and the shipping package. it was not shipped in a box or cheap plastic, it was in a cloth sleeve in a sealed padded envelope. JJNUSA do claim Oregon origins... yeah right etsy.com says ships from china.
i have played around with plenty of cases and phones in cases so it's not like i only have really had the note 20 ultra... just do not get one of them ultra thin all tpu cases. i have one for my lg g4 and only really protects the sides and back. busted the screen.