Database Develop

my one plus 3t is bricked unbricked using msmtool but now i cant install or update

my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.

avnash09 said:
my one plus 3t is bricked unbricked using msmtool but now i cant install or update the ROM into it.. please help me can someone help me using team viewer please or a remote might also help me.. please help me no wifi and bluetooth too as of now.
Click to expand...
Click to collapse
not even a single reply.. this is not the way to treat a new member thanq

avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.

ast00 said:
There are a couple of reasons for people not replying.
First of all, the lack of details on your problem makes it impossible to determine the solution.
1. What do you mean bricked? Bootloop? Stuck on OnePlus logo? Hard brick? How did you get it bricked in the first place?
2. The restore tool removes TWRP. Have you installed it again?
3. What do you mean you can't install or the update the ROM? Is there an error message? Are you trying to flash a custom ROM in the stock recovery?
4. You waited less than 2 hours. You realize there are different time zones? Some people are sleeping, others are at work.
Click to expand...
Click to collapse
hi ,
i am a newbie here . my phone gets heated up after the ota install of 4.1.6 so i thought of factory resetting it. after resetting it. it got struck on the one plus logo and started booting again and again. so one of my friend asked to check the forum and i used [UNBRICK] Unbrick Tutorial For The OnePlus 3T!!!!!!!!! by Haris K. from the forum. it installed the os sucessfully. but i couldnt find wifi and bluetooth buttons enabled. so i thought of installing new roms but it gets struck on the one plus logo.. please help me. thanks in advance

avnash09 said:
not even a single reply.. this is not the way to treat a new member thanq
Click to expand...
Click to collapse
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.

Anova's Origin said:
Hey you self-entitled prick, transfer a copy of the full ROM onto your phone through adb/USB OTG/MTP and flash it through the stock recovery. If you had previously unlocked your bootloader and have TWRP installed, use that to flash instead. If you do not know what any of the above means, look for it yourself through the forums.
Click to expand...
Click to collapse
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message

avnash09 said:
after flashing the rom i am getting a message decryprtion unsuccessful. the password is correct but the data is corrupt how to bypass this message
Click to expand...
Click to collapse
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.

fareed_xtreme said:
Get into the stock recovery and wipe both cache and userdata partitions before proceeding to troubleshoot further.
Click to expand...
Click to collapse
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get

avnash09 said:
after doing so my OS has started but wifi and bluetooth are greyed out. persist folder cannot find any data
.bt_nv.bin
WCNSS_qcom_wlan_nv.bin
WCNSS_qcom_wlan_nv_calibration_persist.bin
WCNSS_qcom_wlan_nv_regulatory_persist.bin
no file exists .. is the answer i get
Click to expand...
Click to collapse
Reflash with the MSMtool after re-downloading everything and verifying all downloads first before proceeding. Use the tool I have posted at https://forum.xda-developers.com/oneplus-3t/how-to/guide-official-op3t-stock-reset-to-oos-t3598864
Ensure you verify before starting the flash. Also uninstall or deactivate any anti virus application installed on your PC.

should i change the data partitions and everything to f2fs or other thing. system to ext4 data to f2fs

For now, don't worry about the data partitions. As mentioned above, reflash from MSMTools, verify the downloaded package first, and then check. All your issues are probably caused by a bad file.

None of the custom roms are booting

Hey everyone! I have a weird problem. I have rooted my Honor 5C NEM-L21 but everytime i try to flash a custom rom it gets bootlooped. I have tried multiple different roms and formatting /data as f2fs , yet have the same problem everytime that i flash a custom ROM. I have as well everytime downgraded the OS back to EMUI 4 and updated the OS to EMUI 5 but it does not help with the problem. Does anyone have any idea what might cause this problem? Thanks

onnz423 said:
Hey everyone! I have a weird problem. I have rooted my Honor 5C NEM-L21 but everytime i try to flash a custom rom it gets bootlooped. I have tried multiple different roms and formatting /data as f2fs , yet have the same problem everytime that i flash a custom ROM. I have as well everytime downgraded the OS back to EMUI 4 and updated the OS to EMUI 5 but it does not help with the problem. Does anyone have any idea what might cause this problem? Thanks
Click to expand...
Click to collapse
Don't use the original TWRP

AlexMihai26 said:
Don't use the original TWRP
Click to expand...
Click to collapse
I have used HassanMirza01's TWRP everytime when flashing, that should be the correct one right?

onnz423 said:
I have used HassanMirza01's TWRP everytime when flashing, that should be the correct one right?
Click to expand...
Click to collapse
It should be,it depends if you want to flash one of his roms.I'm using Lineage with the latest TWRP and it's working .

AlexMihai26 said:
It should be,it depends if you want to flash one of his roms.I'm using Lineage with the latest TWRP and it's working .
Click to expand...
Click to collapse
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me

onnz423 said:
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me
Click to expand...
Click to collapse
I have the same problem, i tried it several times but never worked. I gave up and instaled OctRom form felix-development after all...

onnz423 said:
Yeah, not sure what im doing wrong then. Maybe i should try to reflash the kernel after flashing the ROM. This phone is pretty painful to mod if you ask me
Click to expand...
Click to collapse
Try the stock kernel.I did that to make Lineage work,or you could try first to install elite rom then the rom that you want.

Project Treble? Working?

Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets

florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
I think yes, but I'm not sure

Was wondering the same thing, does anyone know if the red magic 3 is A only or an A/B device. I'm pretty sure it's A only, but I couldn't find any documentation online.

Its A only i think.

Hum... So Project Treble should work ?
That is interesting !
If I could install Resurrection Remix to this device and provided everything works it would become really almost perfect.
If anyone wants to try... If not I'll do it myself when I have time (in 2 or 3 days)...
Regards.

If the device has treble support, meaning a vendor partition it should work no problem, a/b partitioning is really not required for treble.

I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:

trepKep said:
I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:
Click to expand...
Click to collapse
So, this means its not working.. Sad Story.

florian-m19 said:
So, this means its not working.. Sad Story.
Click to expand...
Click to collapse
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.

trepKep said:
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.
Click to expand...
Click to collapse
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI

em902566 said:
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI
Click to expand...
Click to collapse
I'll keep that in mind

trepKep said:
I'll keep that in mind
Click to expand...
Click to collapse
Hey, did you try it again?

florian-m19 said:
Hey, did you try it again?
Click to expand...
Click to collapse
No, I was busy. But I'm trying right now

Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.

trepKep said:
Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.
Click to expand...
Click to collapse
Hmm then we must wait for a custom Rom..

florian-m19 said:
Hmm then we must wait for a custom Rom..
Click to expand...
Click to collapse
Yeah, a one plus 7 pro port would be nice

florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?

Bryceicle1971 said:
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?
Click to expand...
Click to collapse
Many people have faced the issue and they have recovered their device. Look for all solutions available.

danishajaz said:
Many people have faced the issue and they have recovered their device. Look for all solutions available.
Click to expand...
Click to collapse
I have. 7 weeks an counting an no working cell yet. I bought an Mi9 an no issues with it. Easy to reinstall firmware. The red magic 3 is the most difficult to repair cell I have ever encountered. I wish they had something like miflashpro for it

Treble is working from chinese ROM with twrp make sure image is A/B because this device is A/B

Auto Rotation Not Working Properly !!!

Guys, some auto rotate work but mostly it not. Whether, am on custom or stock ROM.
Please help me with this issue.
How to make auto rotate work perfectly?? Or I should go to service centre???

did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again

sam00561 said:
did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again
Click to expand...
Click to collapse
Yes. Now so what I have to do??? Flash q ROM or pie ROM with fastboot. Pls let me know bro

If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.

sam00561 said:
If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.
Click to expand...
Click to collapse
You mean miui q ROM.

Basically flash back the rom which came with your phone I assume that would have been pie .

sam00561 said:
Basically flash back the rom which came with your phone I assume that would have been pie .
Click to expand...
Click to collapse
Yes it was pie but I don't know version. So can I flash q rom.
Am already on miui pie

I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.

sam00561 said:
I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.
Click to expand...
Click to collapse
Buyed from flipkart

gurwinderr84 said:
Buyed from flipkart
Click to expand...
Click to collapse
Are you in India

sam00561 said:
Are you in India
Click to expand...
Click to collapse
Hnji, India

I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
He's in India so likely best option is the stable India rom to flash. I tried posting the link but xda won't allow.

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Am on India miui 10.3.5.0 using oragefox recovery

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Please tell me solution

Wow are you still trying to fix this issue can you join the k20 pro telegram group there's many developer in there who can help straight away.

Yes pls help to solve issue

gurwinderr84 said:
Please tell me solution
Click to expand...
Click to collapse
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend

kitsune_snake said:
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend
Click to expand...
Click to collapse
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??

gurwinderr84 said:
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??
Click to expand...
Click to collapse
Allright, first I never mentionned anything about flashing a fastboot rom, so you need to take it easy and follow instructions attentively (don't panic it's all gonna be okay)
Since you relocked your bootloader you just have to unlock it again using the many guides posted on this forum (I will not help you with this since there's already plenty of thread on the subject)
after your bootloader is back to an unlocked state, you re-installed OrangeFox and you flashed the ROM you want follow the procedure I typed to the letter and you'll be fine.
As for how to flash the "persist.img". In the "files" tab in OrangeFox just tap on the "persist.img" file and in the window that opens you will have a chance to select to which partition you wanna flash the file (you need of course to select the "persist" partition)

Question cant get back yo stock from pixel experience ?

can someone help pleasae , i have pixel experience on my redmi note 10 pro and trying to go back to stock but its failing . when tring miflash the progress bar speeds to green in like 1 second and nothing is flashed and mi pc suite cant detect phone
whats best way to get back to stock please

Simple, do the same as for every other custom rom. Put your Stock rom on your sdcard and go into recovery(process as usual a full wipe), then install stock rom. You have to install TWRP/Pixel-Recovery again ofc.

Sorted it now . Thanks anyway . I had to delete a few lines of a batch file that was preventing rollback and did it in miflash

garny68 said:
Sorted it now . Thanks anyway . I had to delete a few lines of a batch file that was preventing rollback and did it in miflash
Click to expand...
Click to collapse
Maybe you can help me by telling me the lines and where to find them! I am stuck! Please

kazi69 said:
Maybe you can help me by telling me the lines and where to find them! I am stuck! Please
Click to expand...
Click to collapse
Watch this video . I followed the steps but it kept failing to flash .around the 10 min mark he will talk about the anti rollback feature . Follow his steps on deleting the lines in the text file and it worked 1st time for me

garny68 said:
Sorted it now . Thanks anyway . I had to delete a few lines of a batch file that was preventing rollback and did it in miflash
Click to expand...
Click to collapse
That's a safety check. Bypassing that increases the risk to brick this device.

[email protected] said:
That's a safety check. Bypassing that increases the risk to brick this d
Click to expand...
Click to collapse
[email protected] said:
That's a safety check. Bypassing that increases the risk to brick this device.
Click to expand...
Click to collapse
I didn't know that as he never said in tutorial . As I won't be installing an other ROMs and everything is working fine would I be ok to leave it as it is or should I download the ROM to my phone and install original ROM over the top via local storage ?
[email protected] said:
That's a safety check. Bypassing that increases the risk to brick this device.
Click to expand...
Click to collapse
Doesn't mention that in the video and was only way I could get to install the ROM and get back to original . Everything seems fine now it's installed . As I won't be installing anymore ROMs would it be safe to leave as is or would you recommend doing something ? .thanks

garny68 said:
I didn't know that as he never said in tutorial . As I won't be installing an other ROMs and everything is working fine would I be ok to leave it as it is or should I download the ROM to my phone and install original ROM over the top via local storage ?
Doesn't mention that in the video and was only way I could get to install the ROM and get back to original . Everything seems fine now it's installed . As I won't be installing anymore ROMs would it be safe to leave as is or would you recommend doing something ? .thanks
Click to expand...
Click to collapse
Xiaomi has implemented anti rollback to prevent switching to old builds. Recovery ROMs don't have this safety check but fastboot ROMs do have. Bypassing this might brick the device like many Note 5 pro owners bricked their devices by flashing older recovery rom which bypassed the safety check. If they'd have flashed fastboot rom their devices could have been saved.

[email protected] said:
Xiaomi has implemented anti rollback to prevent switching to old builds. Recovery ROMs don't have this safety check but fastboot ROMs do have. Bypassing this might brick the device like many Note 5 pro owners bricked their devices by flashing older recovery rom which bypassed the safety check. If they'd have flashed fastboot rom their devices could have been saved.
Click to expand...
Click to collapse
I put phone into fastboot mode then flashed with the mi flash tool . Obviously I deleted the text out of the file in the tutorial but as I'm up and running on latest firmware would it be safe to say all is good my end ? . I flashed with a fastboot ROM latest one

garny68 said:
can someone help pleasae , i have pixel experience on my redmi note 10 pro and trying to go back to stock but its failing . when tring miflash the progress bar speeds to green in like 1 second and nothing is flashed and mi pc suite cant detect phone
whats best way to get back to stock please
Click to expand...
Click to collapse
Different question: Did you like the custom pixel rom? Is it worth to change it or should stick to stock rom? What issues you found there?

It's a good ROM the pixel ROM . Nothing up with it at all . I just felt I'd keep it stock . I didn't encounter any problems with it. Each to there own as they say . You may love it . Plenty of tutorials on YouTube reviewing it on note 10 pro

garny68 said:
I put phone into fastboot mode then flashed with the mi flash tool . Obviously I deleted the text out of the file in the tutorial but as I'm up and running on latest firmware would it be safe to say all is good my end ? . I flashed with a fastboot ROM latest one
Click to expand...
Click to collapse
Yes, fine. ARB index should either be same or greater. Since it was same you're safe. All's fine. But be sure to check that index before doing this.

Thanks for that pal

ARB is not present with custom rom (aosp and miui) right ?

garny68 said:
I put phone into fastboot mode then flashed with the mi flash tool . Obviously I deleted the text out of the file in the tutorial but as I'm up and running on latest firmware would it be safe to say all is good my end ? . I flashed with a fastboot ROM latest one
Click to expand...
Click to collapse
May I know the version numbers..