I was in Bliss ROM and wanted to do a clean flash so I wiped system, data and cache and installed ROM, Gapps, Disable encryption zip and Magisk but when the ROM booted the android setup crashes and didn't go past there. I flashed again following the instructions for that specific ROM but the sensors didn't work only the camera so I flashed a persist image but now not even the front camera works, how can I fix it? Please help
Could someone please send me their persist/ persist backup?
Isley_ said:
I was in Bliss ROM and wanted to do a clean flash so I wiped system, data and cache and installed ROM, Gapps, Disable encryption zip and Magisk but when the ROM booted the android setup crashes and didn't go past there. I flashed again following the instructions for that specific ROM but the sensors didn't work only the camera so I flashed a persist image but now not even the front camera works, how can I fix it? Please help
Could someone please send me their persist/ persist backup?
Click to expand...
Click to collapse
same here.. after flashing the persist.img file all sensors are working fine now except the front camera.. it's not even working for once!
learnerz said:
same here.. after flashing the persist.img file all sensors are working fine now except the front camera.. it's not even working for once!
Click to expand...
Click to collapse
Which one did you flash? From which Rom?
Isley_ said:
Which one did you flash? From which Rom?
Click to expand...
Click to collapse
i am using an indian variant. tried flashing persist.img from both 11.0.1.0 & 11.0.4.0 but nothing happened!
ufff finally it's working!!!! again flashed the fastboot rom 11.0.1.0 & after calibrating 3times it's working fine now <3
learnerz said:
ufff finally it's working!!!! again flashed the fastboot rom 11.0.1.0 & after calibrating 3times it's working fine now <3
Click to expand...
Click to collapse
Is that rom miui 11 or 10? Android 9 or 10?
Isley_ said:
Is that rom miui 11 or 10? Android 9 or 10?
Click to expand...
Click to collapse
miui 11 android 10.. tell me which variant you are using so that i can help
learnerz said:
miui 11 android 10.. tell me which variant you are using so that i can help
Click to expand...
Click to collapse
I have a chinese phone, should I install the latest fastboot ROM V11.0.8.0.QFKCNXM?
Isley_ said:
I have a chinese phone, should I install the latest fastboot ROM V11.0.8.0.QFKCNXM?
Click to expand...
Click to collapse
yes flash that fastboot rom & calibrate your camera.. this option automatically it will pop up! i hope it will fix all those sensor related problems.. if still there is any flash the persist file directly
learnerz said:
yes flash that fastboot rom & calibrate your camera.. this option automatically it will pop up! i hope it will fix all those sensor related problems.. if still there is any flash the persist file directly
Click to expand...
Click to collapse
If it works can I flash a custom ROM after?
Isley_ said:
If it works can I flash a custom ROM after?
Click to expand...
Click to collapse
yes absolutely.. just follow the general process of switching from miui to custom rom!
learnerz said:
yes absolutely.. just follow the general process of switching from miui to custom rom!
Click to expand...
Click to collapse
The fastboot rom V11.0.8.0.QFKCNXM is the latest version, does that mean I don't need to flash the vendor?
Isley_ said:
The fastboot rom V11.0.8.0.QFKCNXM is the latest version, does that mean I don't need to flash the vendor?
Click to expand...
Click to collapse
yes clean flashing the whole fastboot rom will automatically flash the whole package!
learnerz said:
yes clean flashing the whole fastboot rom will automatically flash the whole package!
Click to expand...
Click to collapse
Where do you download the fastboot rom? I'm downloading from https://xiaomifirmwareupdater.com/miui/raphael/ but it's slow
Isley_ said:
Where do you download the fastboot rom? I'm downloading from https://xiaomifirmwareupdater.com/miui/raphael/ but it's slow
Click to expand...
Click to collapse
i downloaded from here also but got good speed ?
Related
I want a little help from the community. I recently unlocked the bootloader on my Mi5 and flashed twrp and then installed cm 14.1 on it. Now I want to revert back to stock miui 8 that came with the phone. How can I do this? Can anyone help me out?
Ishan Vajpeyi said:
I want a little help from the community. I recently unlocked the bootloader on my Mi5 and flashed twrp and then installed cm 14.1 on it. Now I want to revert back to stock miui 8 that came with the phone. How can I do this? Can anyone help me out?
Click to expand...
Click to collapse
Take a look at the download section of MIUI.com
They have 2 versions, 1 to flash via TWRP or other recovery's and 1 to use there flash tool.
You can choose what you want in there.
elot01 said:
Take a look at the download section of MIUI.com
They have 2 versions, 1 to flash via TWRP or other recovery's and 1 to use there flash tool.
You can choose what you want in there.
Click to expand...
Click to collapse
Is it so? I've undestood that you can't flash orginal miui rom with twrp but you have to use miflash instead. But you can flash eu rom or any other custom rom with twrp.
Nbkdnssr said:
Is it so? I've undestood that you can't flash orginal miui rom with twrp but you have to use miflash instead. But you can flash eu rom or any other custom rom with twrp.
Click to expand...
Click to collapse
I flashed the fastboot rom through mi flash tool, but it didn't boot.
I'm just referring to this: http://forum.xda-developers.com/showpost.php?p=70197250&postcount=508
It seems that you can't flash at least nougat miui with latest twrp.
Nbkdnssr said:
I'm just referring to this: http://forum.xda-developers.com/showpost.php?p=70197250&postcount=508
It seems that you can't flash at least nougat miui with latest twrp.
Click to expand...
Click to collapse
Still, how do i revert back to stock miui 8?
Ishan Vajpeyi said:
Still, how do i revert back to stock miui 8?
Click to expand...
Click to collapse
I haven't done it so maybe I'm not the best advisor. But there is some discussion of it: http://forum.xda-developers.com/mi-5/help/how-to-revert-cm14-to-miui-t3516986
Specially the last reply.
But as far as i understand, orginal miui rom needs to be flashed in fastbood mode with miflash. Eu rom can be flashed with twrp.
Nbkdnssr said:
I haven't done it so maybe I'm not the best advisor. But there is some discussion of it: http://forum.xda-developers.com/mi-5/help/how-to-revert-cm14-to-miui-t3516986
Specially the last reply.
But as far as i understand, orginal miui rom needs to be flashed in fastbood mode with miflash. Eu rom can be flashed with twrp.
Click to expand...
Click to collapse
Thanks man, it worked!
Hmmm, you guys are right.
I had a link about flashing from recovery, but that was only if you already had MIUI running (v7) and you wanted to upgrade to 8.
My bad, sorry.
Ishan Vajpeyi said:
Thanks man, it worked!
Click to expand...
Click to collapse
did you just go into fastboot and clean all and then flash using mi flash ?
or did you have to install the original recovery via adb first ?
Is it safe if I go back to MIUI from my RR ROM with custom kernel?
mfkofc said:
Is it safe if I go back to MIUI from my RR ROM with custom kernel?
Click to expand...
Click to collapse
Just make sure to backup everything, since flashing using fastboot mode will erase everything including internal storage.
After boot the accelometer stops working after a few minutes, so autorotation is not functional.
I found that this i maybe a bug in miui 10 and also other devices, some users say when you google this error.
IT seems to have to do with autobrightness setting. I tried some things but did not find a solution yet.
eg I tried this: http://en.miui.com/thread-458462-1-1.html
My question is, is this still a bug or I am the only one who has this issue?
I am facing the same issue. What ROM are you using?
kltos said:
I am facing the same issue. What ROM are you using?
Click to expand...
Click to collapse
I´m on raphael_eea_global_images_V10.3.1.0.PFKEUXM. There is an update to V10.3.3.0.PFKEUXM, but this has problems with TWRP and I need this.
A solution for many ist, that the persist.img has an error and to flash persist.img again through TWRP or fastboot. But when doing this I get an error "partition is write protected".
Look here: http://en.miui.com/thread-312976-1-1.html
Maybe a dirty flash of the full rom is a solution, but I have never made this.
It has something to do with automatic brightness. I also tried this, but didn´t work:
http://en.miui.com/thread-458462-1-1.html
It´s important to know if this is a general bug or we need to flash rom again. I don´t know....
franky_z said:
I´m on raphael_eea_global_images_V10.3.1.0.PFKEUXM. There is an update to V10.3.3.0.PFKEUXM, but this has problems with TWRP and I need this.
A solution for many ist, that the persist.img has an error and to flash persist.img again through TWRP or fastboot. But when doing this I get an error "partition is write protected".
Look here: http://en.miui.com/thread-312976-1-1.html
Maybe a dirty flash of the full rom is a solution, but I have never made this.
It has something to do with automatic brightness. I also tried this, but didn´t work:
http://en.miui.com/thread-458462-1-1.html
It´s important to know if this is a general bug or we need to flash rom again. I don´t know....
Click to expand...
Click to collapse
Thanks for the insight.
(I flashed latest fastboot rom using miflash tool and auto rotate was broken.)
Flashing persist.img has done the trick. My problem is solved.
Here is what I did:
My device is raphaelin, that is k20 pro Indian.
I downloaded latest fastboot rom for raphaelin and extracted persist.img and flashed it using TWRP 3.3.1-15 Unofficial by mauronofrio. Problem solved.
Hope the same works for you.
kltos said:
Thanks for the insight.
(I flashed latest fastboot rom using miflash tool and auto rotate was broken.)
Flashing persist.img has done the trick. My problem is solved.
Here is what I did:
My device is raphaelin, that is k20 pro Indian.
I downloaded latest fastboot rom for raphaelin and extracted persist.img and flashed it using TWRP 3.3.1-15 Unofficial by mauronofrio. Problem solved.
Hope the same works for you.
Click to expand...
Click to collapse
Thanks for the help. I´m on Fox Recovery, it did not work, I will try TWRP...
franky_z said:
Thanks for the help. I´m on Fox Recovery, it did not work, I will try TWRP...
Click to expand...
Click to collapse
No problem . Let me know if that works.
kltos said:
No problem . Let me know if that works.
Click to expand...
Click to collapse
Flashed TWRP you mentioned, flashed pesist.img and sensors work again. Before that, front camera calibratet itself , but then everything works :good:
my A2 Converted to 6X stuck in bootloop after making a BackUp by PitchBlack, It wont boot in System nor Recovery anymore,
what should I do?
if I try to go to recovery it turns off,
and if I connect charger cable it turns on and off repeatedly (each 2-3 secs)
Keep force rebooting by holding down the power button and volume up button continuously / connecting the charger multiple times until you manage to get into recovery mode (I tried it for over 5 mins and it will eventually work for sometimes).
Then flash the latest Wayne (6X) firmware (download in Xiaomi Firmware Updater's website), it fixed that situation for me.
I reflashed recovery by fastboot, and reboot it by command line, it boots, but if I restart the phone the problem occurs again,
sz.hatef said:
I reflashed recovery by fastboot, and reboot it by command line, it boots, but if I restart the phone the problem occurs again,
Click to expand...
Click to collapse
Yeah, it was the miui eu rom firmware problem. Some ppl, including me, fixed the issue by flashing latest wayne firmware in recovery.
MarcusMario0605 said:
Yeah, it was the miui eu rom firmware problem. Some ppl, including me, fixed the issue by flashing latest wayne firmware in recovery.
Click to expand...
Click to collapse
could you please share the link of the latest wayne firmware here?
sz.hatef said:
could you please share the link of the latest wayne firmware here?
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
MarcusMario0605 said:
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
Click to expand...
Click to collapse
I flashed the Stable One, now when it boots it does not show the Unlocked message !
is that mean that my bootloader is locked again??
the fastboot says: (bootloader) unlocked:yes
Bootloader is still unlocked despite you flashed the firmware since flashing firmware will definitely not lock the bootloader. (probs. the perk of miui 11 eu roms, i'm not sure)
MarcusMario0605 said:
https://xiaomifirmwareupdater.com/firmware/wayne/
just flash the zip file in recovery.
Click to expand...
Click to collapse
I have converted my a2 to 6x.. Will it be okay if i flash the zip without deleting firmware updater folder! I already triggered arb 4. In xiaomi eu rom camera doesn't work at all! So i have to use custom roms! Camera is fine in custom rom! And should i wipe my vendor too? Before flashing the zip?
I flash weekly roms of xioami.eu and camera just works fine, ( and I don't delete firmware folder) why do you want to delete it while you have already triggered ARB?!
Mozahid007 said:
I have converted my a2 to 6x.. Will it be okay if i flash the zip without deleting firmware updater folder! I already triggered arb 4. In xiaomi eu rom camera doesn't work at all! So i have to use custom roms! Camera is fine in custom rom! And should i wipe my vendor too? Before flashing the zip?
Click to expand...
Click to collapse
It is okay if you don't delete firmware update folder since you already triggered the arb 4.
And don't wipe your vendor if you are going to flash that zip, since that zip only contains firmware files.
sz.hatef said:
I flash weekly roms of xioami.eu and camera just works fine, ( and I don't delete firmware folder) why do you want to delete it while you have already triggered ARB?!
Click to expand...
Click to collapse
Last time i flashed with firmware updater folder my phone bricked and triggered arb 4! And after that i recovered it any how! Now in eu roms camera doesn't work at all!
Mozahid007 said:
Last time i flashed with firmware updater folder my phone bricked and triggered arb 4! And after that i recovered it any how! Now in eu roms camera doesn't work at all!
Click to expand...
Click to collapse
I think you miss something , if your bootloader is unlocked, when you flash the whole ROM intact it should works perfectly, but sometimes shifting from stable to beta could lead to boot loop, you need to wipe system , davilk, and cache partitions
MarcusMario0605 said:
It is okay if you don't delete firmware update folder since you already triggered the arb 4.
And don't wipe your vendor if you are going to flash that zip, since that zip only contains firmware files.
Click to expand...
Click to collapse
Okay thanks a lot! Gonna try it very soon...
Rom OneOS based A715FXXS7BUJ1
read to all
Hi guys, here I share my ROM for the Galaxy A71, I am not responsible for damaged phones, install at your own risk.
This rom was born from the need to have root or some other modification in stock but Samsung has included many limitations which make it difficult to modify in stock.
Features
Debloat
vaultkeeper disabled
FRP removed
knox counter at 0 (Samsung Health)
Fingerprint animation changed
optimizations
Google Discover enabled
Dolby without headphones
Apply themes without trial time limit
Deknoxed
Full Edge Lighting (extra effects unlocked)
Secure Folder working
Floating Feature tweaks
Mock Locations
Mock Providers
High Volume Warning (disable)
Secure Flag
Recovery Reboot (this is when you press Reboot and he Reboot to recovery)
Click to expand...
Click to collapse
BUGS: At the moment it has not reported any bug.
Installation:
Extract OneOS ROM with an unzip program
Reboot recovery
Format data
Install ROM as "super" image in TWRP
Flash muiltidisabler
Flash Magisk (optional)
Reboot
Downloads:
Version 1:
Link: Google Drive
Credits: Kernel Source (Link)
Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.
Thank you very match
ZhandarbekD said:
Rom OneOS based A
Click to expand...
Click to collapse
Please check your PM inbox. Thank you.
-Regards: Badger50 FSM
Getting error 255 when flashing custom rom how to fix
Unable to flash any custom rom due to this error occurring
Here the error
Is it possible to dirtflash with NcX?
How to install ?
I get 255 error on TWRP.
papgr00 said:
Hello from Greece
I try this rom for 2 days . Everything looks fine . I have not any problem.
Click to expand...
Click to collapse
Any bug ?
How i can install ?
I getting 255 error on twrp
josegarcia01 said:
Any bug ?
How i can install ?
I getting 255 error on twrp
Click to expand...
Click to collapse
What TWRP version do you use?
Pupet_Master said:
What TWRP version do you use?
Click to expand...
Click to collapse
Twrp 3.5.1
josegarcia01 said:
Twrp 3.5.1
Click to expand...
Click to collapse
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.
Pupet_Master said:
Well you may not like to risk but i feel that the error is due to TWRP not being able to write on the device.
First things first, try to download again the ROM, and don't flash the zip file, but flash the .img file inside.
Click to expand...
Click to collapse
I did, tried to flash The img file.
And tried With twrp 3.6 too
josegarcia01 said:
I did, tried to flash The img file.
And tried With twrp 3.6 too
Click to expand...
Click to collapse
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive
Pupet_Master said:
It could also be TWRP not being able to access the internal storage to write the ROM.. but im not positive
Click to expand...
Click to collapse
Can you help-me to solve this ?
or, how i can find on the internet ?
josegarcia01 said:
Can you help-me to solve this ?
or, how i can find on the internet ?
Click to expand...
Click to collapse
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data
Pupet_Master said:
I think you should try to flash magisk and see if it flash ok
If so, i dont know what the issue is... if it wont flash ok, you will need to format your phone data
Click to expand...
Click to collapse
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.
josegarcia01 said:
Flash ok, i tried magisk, and multidisabler, both Flash ok.
The system img as a super i get these error.
Click to expand...
Click to collapse
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.
Pupet_Master said:
Ok, i don't know what is the problem.
Either risk format the phone data (but you will lose everything) and try to flash again... or well... wait for the author to reply.
Click to expand...
Click to collapse
Everytime i tried formating data.
I dont tried withouth format data.
I updated to MIUI 13 from miui.EU and now I can not go back to an older ROM even with full data formatting. I am seemingly stuck on this ROM. I really don't like it. Is there any way to go back?
Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot
I just back to MIUI 12.5 EU from MIUI 13 EU, and I don't have problem
Hpotersept2 said:
Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot
Click to expand...
Click to collapse
Will this work? It gave me an anti roll back notice before
[email protected] said:
I just back to MIUI 12.5 EU from MIUI 13 EU, and I don't have problem
Click to expand...
Click to collapse
I think OrangeFox was my problem I used it on the first install. I went back to TWRP but the damage was done.
Hpotersept2 said:
Flash the older rom using fastboot method and necessary files.
Download the fastboot files from here: https://xiaomifirmwareupdater.com/
look up a "how to unbrick xiaomi" tutorial to learn how to flash a rom via fastboot
Click to expand...
Click to collapse
I tried it. It won't flash.
What if I try a non Mi ROM first? Will that fix it?
Supermatt01 said:
What if I try a non Mi ROM first? Will that fix it?
Click to expand...
Click to collapse
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
I'll try it that way.
Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
I'm trying to find the vendor and fw
Laptapper said:
Did you've installed TWRP?
Then factory reset in twrp
Boot TWRP again
format data with yes.
Boot TWRP again
Flash fw and vendor if MIUI or not if oss
Flash rom
Flash magisk or not
Format data again with yes
Boot system
In my opinion this should work with every recovery rom
Click to expand...
Click to collapse
No good.
Supermatt01 said:
I tried it. It won't flash.
Click to expand...
Click to collapse
Of course it won't, because the flash_all.bat has a couple lines in the beginning that have anti-rollback, you have to modify it with notepad, just open with notepad and delete those lines, then save it and flash normally.
Hpotersept2 said:
Of course it won't, because the flash_all.bat has a couple lines in the beginning that have anti-rollback, you have to modify it with notepad, just open with notepad and delete those lines, then save it and flash normally.
Click to expand...
Click to collapse
Which lines? When I tried that, it would not start.
I did it, it won't work.
I think I fixed it I took the fastboot script out of the miui 13 update and put it in the folder for the miui 12 fastboot. It stared the old boot logo. It is started now. I hope it is stable. Thank you all for the help and suggestions.