i have redmagic 3 , i would root it , so i tried twrp > resualt is device is currapt (bricked)
i teried patch boot with magisk and when boot phone > device is currapt
i tried install old chines rom 2.27 with phone recovery otg then system finish install and when reboot > devices currapt
what can do
my devices redmagic 3 android9
i unlock bootloader every step
Finally i know what i miss
And that reason the (unfully) explaining on web
Every one said that RM3 unlock oem by that command :
fastboot oem nubia_unlock NUBIA_NX629J
But no one talk about :
Fastboot flash unlock
. Some one hear tow words about coding and come on web writing coding guids
Related
hi every one.
i need to unlock bootloader to use my tablet.
i go to fastboot mode with (power)+(VOL-) and PC can see devices.
attachment 1 (DM.jpg)
i run "fastboot devices" command and show me device is connected.
when i run "fastboot oem unlock" or "fastboot oem unlock61646" command , say :
Code:
OKAY [0.001s]
finished . total time : 0.002s
like attachment 2(cmd.jpg)
but after all this , boot loader won't be unlocked.
and i can not flash CWM recovery . this happen:
attachment 3 (cmd2.jpg)
any body can help me?
important notes:
USB debugging is off.
i root this tablet a few mounts ago and change DPI with "DPI changer" , after reset , tablet turn on and boot successfully but when boot complete show "UI" error repeatedly and tablet is completely useless.
i access to stock recovery.
i guess this is a driver problem, any body of asus memopad users that unlock their bootloader with fastboot have the driver?
Solution found
use this link ,
http://forum.xda-developers.com/android/development/rom-asus-memo-pad-8-me180a-ww-3-1-0-42-t3027620/post60970877#post60970877
using post #3
sorry for my bad english
Hi guys,
I have an old Huawei P9 phone that I installed TWRP on. I got a few ROMs from here and before I installed one of them, I cleaned out the whole phone and when I went to install the ROMs, they didn't work. It gives me errors during install. Right now, I have no OS on the phone. Please help. How do I fix it?
Thanks
blondjen said:
Hi guys,
I have an old Huawei P9 phone that I installed TWRP on. I got a few ROMs from here and before I installed one of them, I cleaned out the whole phone and when I went to install the ROMs, they didn't work. It gives me errors during install. Right now, I have no OS on the phone. Please help. How do I fix it?
Click to expand...
Click to collapse
Sorry but installation never goes by deleting all partitions from TWRP - did you read instructions for a particular custom ROM (must be ported to EMUI), what are the required preconditions (EMUI 4, 5 or 8) and what is the installation method - like flashing only System (by Fastboot) and making Factory reset from eRecovery or so.
By removing Vendor, OEMInfo, etc, you actually brick the device and you may have problems to recover IMEI
You didn't mention what was your stock firmware and which TWRP you installed - be careful, TWRP versions for EMUI 4, 5 or 8 are different (because of different partitions and encryptions) and using the wrong one will also lead to bricks (TWRP for P9 from TWRP site is AFAIK good only for EMUI 4)
To start with, boot to Fastboot and execute commands to try finding out what was your stock firmware:
Code:
fastboot oem get-bootinfo
PAUSE
fastboot oem get-product-model
PAUSE
fastboot oem get-build-number
PAUSE
fastboot oem oeminforead-SYSTEM_VERSION
PAUSE
fastboot getvar vendorcountry
To boot to Fastboot:
- switch off
- connect to charger
- press and keep presing Vol-
- boot
Does it show Phone (=Bootloader) and FRP locked (both green) or some/both unlocked (red)?
Boot to eRecovery (hopefully you didnt erase by TWRP):
- like booting to Fastboot but (instead of Vol-) press and keep pressing Vol+ while connected to charger.
Try (in that order):
- Install latest firmware and recovery, followed by Factory reset (both are options in eRecovery)
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
You give problem because your'Mg3 not yet uninstall root complete, so Android system prevent it booting.
=> Solution:
- Step 1: re-unbrick your phone with unbrick tool (eu).
- Step 2: reboot to bootloader.
- Step 3: fastboot oem nubia_unlock NUBIA_NX629J
- Step 4: use volumn up or down to choose line with content "unlock bootloader". Then wait for your phone working. => Done
≠==========================≠
|Source: sSjBlue197 (vietnamese).|
|Contact: fb.com/ssjblue197. |
≠==========================≠
Nanilucky11 said:
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
Click to expand...
Click to collapse
Enter bootloader POWER BUTTON+VOLUME DOWN
Use PC enter adb command :
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
Then, reboot device
enter command
"fastboot reboot"
Hello . A few minutes ago, I had a problem with the TWRP flashing on my huawei p8 gra-ul00 phone .the adb has command's the twrp is complety flashed on my phone , but it did not come up on my phone(after pressing vol+ and power button's the phone will automatiocally go to huawei erecovery). But I took a little initiative and came up with a solution to this problem. I'm share this.
NOTICE : IF YOU HAVEN'T A USB DATA CABLE , PLEASE BUY IT , OTHERWISE CONTINUING THE STEPS WILL NOT SOLVE YOUR PROBLEM .
Before completing all the steps, connect the phone to the computer using data usb cable, then try to enter the recovery mode (for Huawei phones, hold the power button simultaneously with the volume down button for at least one minute.) If the phone Entered custom recovery, no need to do other steps.
1_First Of All , Unlock the bootloader , then reboot the phone
2_Download the custom recovery . IF YOU HAVE ISN'T A CUSTOM RECOVERY FOR YOUR PHONE , PLEASE SEND A COMMENT AND ENTER YOU PHONE MODEL AND A NAME OF THE CUSTOM RECOVERY YOU WANT TO USE TO IT. IM WILL SEND A REGUESTED CUSTOM RECOVERY FOR YOU IN LESS THAN A HOUR .
3_connect the phone to computer and Enable USB Debugging from Developer Options(go to settings>about phone , then 7 times tap on build number , then go back to settings and select developer options , search for "USB Debugging" Option and enable it.)
4_, install the adb and fastboot drivers(such as minimal adb and fastboot) then install the phone drivers . after installing drivers , reboot the computer , then open cmd and enter the command : adb reboot recovery
5_if a window showed on phone(such as allow usb debugging) , click on yes and retry the level 4 again
If you have any questions or problems , commend here.
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
PrintHelloPeople said:
Hy Bysoft!
I'm new in XDA but i alredy flash some devices with TWRP, it seems that something went wrong with the installation of twrp. Did you try to boot into bootloader (adb reboot bootloader) and then flash the TWRP image with fastboot (fastboot flash recovery twrp.img) and then type fastboot reboot?
I find that list of command: adb reboot etc.. in your device page of TWRP (https://twrp.me/huawei/huaweip8.html). In this site you find the TWRP image for your device, you have to use this image when you flash with fastboot (fastboot flash recovery twrp.img where twrp.img is the image that you downloaded in TWRP site).
PrintHelloPeople
Click to expand...
Click to collapse
Hello .
I am also a newcomer
it's true . I also installed TWRP 3.1.1 on the phone in the same way
Thanks for sharing your opinion with me and other XDA users
Regards ,
I was trying to install Pixel Experience rom for my device.But when I flash the recovery image of pixel experience it was not installed and I was stuck in fastboot mode.Then I tried to somehow the Pixel Experience recovery load and phone go in a loop show logo poco and restart again and again. The fastboot mode did not coming after that i tried to install a rom using sp flash tool and it was not worked but fastboot mode now coming and I now tried to flash using miflash tool it shows boot in lock state.My bootloader was locked again somehow. Then to bypass this I used some python commands and unlock the bootloader and using flash I flashed my original rom but after that, another problem occurred like google and mi account not being connected google services not working, and mi account also another thing was ok. How can I solve this.?please help. I can't use google services and can't log in mi account also. My OEM unlocking status permanently on it doesn't have an edit option. I used these files to unlock the bootloader.I follow this article
Load the MTKClient: https://github.com/bkerler/mtkclient
After the install (drivers are needed for windows / using linux is preferred) type:
"python mtk da seccfg unlock"
and connect the device (off) with vol- and vol+ buttons pushed.
You may have to use the command "fastboot flashing unlock" or "fastboot oem unlock" in fastboot afterwards.