Deleted by MarvinMod
Do I needed to format data for this?
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
JakunTech1010 said:
Do I needed to format data for this?
Click to expand...
Click to collapse
yes, follow instructions exactly as written
fizzingbees said:
Can you install viper4android from xda labs on stock android 10 with magisk.
Install viper4android, reboot and recheck magisk to see if it still works.
Cuz for Android 9, the moment I install any magisk modules and reboot, the magisk breaks and I have only partial root access ( root access given to apps before still works but access to newer apps doesn't)
Also what do you mean by open stock recovery folder? You mean stock rom we download from samfirm
Click to expand...
Click to collapse
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
A705MN
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
jalexis30 said:
good morning friend I did all the steps you told me and it remains in the lineage logo I believe that the Roms you sent me is from an A705FN and my model is an A705MN that is why it does not configure because it stays in the logo and then it restarts me in twrp
Click to expand...
Click to collapse
my model is a705mn as it says in my signature below, your missing a step somewhere, did you format data properly? I flashed my device while writing the steps then again following the steps. also, I didn't post any stock roms and the los rom works with all a70 devices.
in twrp click wipe, then click format data and type yes and hit enter or the check on the keyboard.
when installing los, step 7 requires format data and step 9 requires format data so in the Los guide there will me format data done twice. these steps are for android 10 users, I have a guide for android 9 users that im transferring here but it will be some time. if your on android 9, pm me and ill link that guide to you, otherwise, try that format data or start from scratch by flashing the entire stock rom.
A705MN
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
jalexis30 said:
sorry excuse my friend so much but in the step of formatting what should I do or could you give me the steps to follow and sorry for so much inconvenience
---------- Post added at 06:44 PM ---------- Previous post was at 06:36 PM ----------
friend and i'm in stock roms android 9 it will be that is why you don't configure the lineage it will be that you send me the android 9 guide
Click to expand...
Click to collapse
as long as you haven't done anything else trying to get it running(if you have, start from scratch by flahing the entire stock rom using odin) otherwise, boot to twrp, click wipe, click format data, type yes and hit the check box in lower right corner, reboot.
if your on 9, use this guide, its a bit outdated but as I said im working on it.
https://forum.xda-developers.com/showpost.php?p=81649149&postcount=151
also, what are you wanting, lineage os or stock os?
A705MN
friend thank you very much and I was able to install everything thank you very much for your contribution and time really that this xda group is the best there are many thanks
MarvinMod said:
yes, when you download the stock rom from samfirm, it becomes a folder with your stock .tar.md5 files inside, that's your stock rom folder I speak of. I do not know if it works for 9. give it a try and let us know. I have 10 and once you update, you cant downgrade due to samsungs fuse set.
FYI, you can remove the .md5 from the stock rom files for faster loading but odin wont check the integrity of the file.
also, did you know that viper is Los based? other custom roms base off of Los so just replace Los in the guide with the rom of your choice. should work but I don't know, I only stick with Los or Stock.
Click to expand...
Click to collapse
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
fizzingbees said:
Viper4android is not a rom
It's a sound driver
It's magisk module.
What I meant is can you install this magisk model or download viper4android v2.7.6.1 from xda labs, install, reboot and check if magisk is still functional on stock Samsung Android 10 rom.
Also isn't android 10 and android 9 bootloader of Samsung rom same... V5 bootloader? Why would it mess with downgrading.?
Click to expand...
Click to collapse
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
MarvinMod said:
Just assumed it was a rom, my apologies. I will check that for you when i have time but ive tested many modules with magisk and they work as well as magisk. Android 10 was an overhaul, not the same rom as 9 but still V5, however, thats not really the issue other then for twrp. Samsung devices has a fuse set, when a samsung devices bootloader is upgraded, the device trips or as we say "burns" out a fuse. The device can not be downgraded. After an update from 9 to 10, if you power off, hold both vol keys and plug into pc, in download mode at the top will tell you if a fuse has been triggered and provisioned. This means you cant go from 10 back to 9.
Click to expand...
Click to collapse
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
fizzingbees said:
Thank you. Please do report back with viper4android. It's proper working with magisk is critical for me.
I understand your explanation about e-fuse.
But then that last android 10 upgrade that had this charging pcb issue, people did downgraded back successfully to Android 9 then.
How did they do that if e-fuse got triggered?
Lets leave this argument here.
I don't want to sidetrack you from your twrp and root work for Android 10.
Click to expand...
Click to collapse
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
kissa67zwi said:
Please tell me how to delete img files from the AP file
Or do I just need to replace img files with lz.4 files
Click to expand...
Click to collapse
Extract the contents of AP file using peazip into a new folder on your desktop. Name the folder AP. Inside the new folder will be the files you need to delete or move out depending on what guide you following. When youve made the necessary changes, repack that new folder with peazip into a .TAR and now its flashable. Do not worry about the .lz4 extension. To delete, as long as its not zipped, right click the file, choose delete. To move the file, right click and hold, drag and drop to wherever and choose move here.
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
MarvinMod said:
Fyi everyone, ill be making some youtube videos of the instructions for newbies by end of the week. It will have start to finish including bootloader unlock.
Click to expand...
Click to collapse
That would be helpful for lot.
Kindly do link your videos here for us when they get uploaded
---------- Post added at 03:31 PM ---------- Previous post was at 03:31 PM ----------
MarvinMod said:
No one with a galaxy A70 has updated to Android 10 stock and then went back to Android 9 stock. Viper worked fine and i kept root.
Click to expand...
Click to collapse
Good to hear.
Thanks for trying and reporting back
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
naruba said:
According to your instructions, I will be able to use tvrp on the Android 10 stock?Rооt is a worker?
Click to expand...
Click to collapse
no,youll be using twrp to root stock 10 this method allows you to keep root and use modules. twrp does not work with android 10 stock due to some changes in 10. it does however work with custom roms. you can either have twrp, custom rom and magisk root or have stock rom and magisk root.
Related
Used Twrp to flash SuperSU installed Xposed framework installer and flashed the nougat sdk.
Modules are working
Zuper
Lucky patcher
Gravitybox
3C
One tap video downloader
Few quick questions. Did you use the official Asus unlock app? Can you post a link to the twrp download?
Shakez619 said:
Used Twrp to flash SuperSU installed Xposed framework installer and flashed the nougat sdk.
Modules are working
Zuper
Lucky patcher
Gravitybox
3C
One tap video downloader
Click to expand...
Click to collapse
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam
DumDumBumBum said:
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam
Click to expand...
Click to collapse
You don't need trwp to install magisk. You can use magisk manager to patch the stock boot image, then adb push to install the patch boot image to your device. There are plenty of tutorials on how to do this here on XDA.
Cyb3rk1ll said:
You don't need trwp to install magisk. You can use magisk manager to patch the stock boot image, then adb push to install the patch boot image to your device. There are plenty of tutorials on how to do this here on XDA.
Click to expand...
Click to collapse
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?
DumDumBumBum said:
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?
Click to expand...
Click to collapse
I have not yet, I'm waiting for an unlock method that is reversable, I have however used magisk to patch boot images on some of my other devices that don't have twrp available.
---------- Post added at 05:50 PM ---------- Previous post was at 05:44 PM ----------
DumDumBumBum said:
Yeah i know, but haven't try it myself and I usually use twrp to install it. That's why I lack the confidence to do so ?.
Have you tried rooting your zenfone 5q?
Click to expand...
Click to collapse
Which part makes you uncomfortable? Is it patching the image or using adb push?
But bro, feels like you posted in the wrong forum. This forum is for Zenfone 5 x86 A500CG/ A501CG.
mzj4213 said:
But bro, feels like you posted in the wrong forum. This forum is for Zenfone 5 x86 A500CG/ A501CG.
Click to expand...
Click to collapse
Is there a dedicated forum for the 5q? I've looked on the app and haven't found one. I find threads for it in all kinds of places though.
Cyb3rk1ll said:
Is there a dedicated forum for the 5q? I've looked on the app and haven't found one. I find threads for it in all kinds of places though.
Click to expand...
Click to collapse
Well yeah somehow, maybe you can make a request to the moderators? Or maybe use some kind of tag temporarily?
DumDumBumBum said:
Where did you get the TWRP? Can you give me the link?
I want to install magisk and enable camera2 api so I can install gcam
Click to expand...
Click to collapse
Soon after making my original post I downloaded the stock rom from the Asus support page the same place I got the bootloader unlock app from.
After flashing I got brave or stupid and found a site that had a TWRP for the zc600kl so i said what the hell and installed the TWRP idk if I can link it here but I'm sure they'll get rid of it if it isn't.
https://mega.nz/#!OuJHnaJR!aUTwAtRcEukqOi6XMh-FKsYcM22gHEzC35YajMkSOns
It turned out to be TWRP 3.2.3.0 and works perfectly. only issue I had was during the Magisk installation, twrp couldn't mount anything. turns out it was showing my internal storage as 0 but it was an extremely easy fix! all I had to do was just change the phones storage file system from it's original to another then immediately back to the original file system (can't remember specifics) within the twrp advanced menu I think, but it worked just fine and my internal storage read the correct size. Found fix on YouTube easily.
I installed magisk flawlessly then installed xposed seamless now have the best of both and everything is working great phone is stable no issues at all I'm very pleased,
Safety net check fails but IDC I don't need it.
Ridiculously easy root I love this phone ?? oh and now I have iOS 11 Emojis lol
Hope this helps all you Zenfone 5Q zc600kl owners out there.
If anyone wishes to know anything else PM me I'll try to help.
???
Shakez619 said:
Soon after making my original post I downloaded the stock rom from the Asus support page the same place I got the bootloader unlock app from.
After flashing I got brave or stupid and found a site that had a TWRP for the zc600kl so i said what the hell and installed the TWRP idk if I can link it here but I'm sure they'll get rid of it if it isn't.
https://mega.nz/#!OuJHnaJR!aUTwAtRcEukqOi6XMh-FKsYcM22gHEzC35YajMkSOns
It turned out to be TWRP 3.2.3.0 and works perfectly. only issue I had was during the Magisk installation, twrp couldn't mount anything. turns out it was showing my internal storage as 0 but it was an extremely easy fix! all I had to do was just change the phones storage file system from it's original to another then immediately back to the original file system (can't remember specifics) within the twrp advanced menu I think, but it worked just fine and my internal storage read the correct size. Found fix on YouTube easily.
I installed magisk flawlessly then installed xposed seamless now have the best of both and everything is working great phone is stable no issues at all I'm very pleased,
Safety net check fails but IDC I don't need it.
Ridiculously easy root I love this phone ? oh and now I have iOS 11 Emojis lol
Hope this helps all you Zenfone 5Q zc600kl owners out there.
If anyone wishes to know anything else PM me I'll try to help.
Click to expand...
Click to collapse
Just tried with this and it says it's too big when flashing and fails ZF5Q ZC600kl (X017D)
slayerking said:
Just tried with this and it says it's too big when flashing and fails ZF5Q ZC600kl (X017D)
Click to expand...
Click to collapse
Same here, seems as though this twrp is for the X017DA which has a much larger size recovery compared to the regular X017D which has a stock recovery size and flash limit of 32mb. I tried for hours to get a ported twrp running on the X017D to no avail. Can someone help?
PizzaG said:
Same here, seems as though this twrp is for the X017DA which has a much larger size recovery compared to the regular X017D which has a stock recovery size and flash limit of 32mb. I tried for hours to get a ported twrp running on the X017D to no avail. Can someone help?
Click to expand...
Click to collapse
I just finished attempting to flash this recovery using my X017DA and I'm getting the file size too large error as well.
There are NUMEROUS people stating that they've rooted this phone and I'd SURE as hell love to know how.
I unlocked the bootloader at this point for nothing, and it's rather irritating.
It's bad enough I have spotty service on this phone because apparently, it doesn't support band 12 (which is crap) and ASUS refuses to cert it for VOLTE
I love the cameras, and functionality of this phone, and for the price the specs are GREAT, but this WILL be the last and only ASUS phone I'll purchase. Hell, I might even ban their computer components from my home after this fiasco.
Question!
Did you use the official Asus unlock app?
dracconus said:
I just finished attempting to flash this recovery using my X017DA and I'm getting the file size too large error as well.
There are NUMEROUS people stating that they've rooted this phone and I'd SURE as hell love to know how.
I unlocked the bootloader at this point for nothing, and it's rather irritating.
It's bad enough I have spotty service on this phone because apparently, it doesn't support band 12 (which is crap) and ASUS refuses to cert it for VOLTE
I love the cameras, and functionality of this phone, and for the price the specs are GREAT, but this WILL be the last and only ASUS phone I'll purchase. Hell, I might even ban their computer components from my home after this fiasco.
Click to expand...
Click to collapse
please tell me how you unlock the bootloader of zc600kl x017d ?
I m trying for months to do so but fail, as the official unlock apk tool is not working.
Please tell me how you unlock the bootloader on ([email protected])
I shall be very thankfull to you for this
Cyb3rk1ll said:
Few quick questions. Did you use the official Asus unlock app? Can you post a link to the twrp download?
Click to expand...
Click to collapse
oye me puedes ayudar para descargar una twrp en asus x017da me puedes dar un link
Hey guys, please help me out. Since Samsung has now released the Stable android 10 update for S9, please find a way to root it. I am not able to root nor install custom kernel ElementalX on it.
I'm waiting for that too. No point in installing Android 10 until root works for me.
same question.
Ideally without wiping data if at all possible
thanks
Matce said:
same question.
Ideally without wiping data if at all possible
thanks
Click to expand...
Click to collapse
I wouldn't recommend that on a main upgrade. It can give unwanted consequences. I always advocate doing a full reset on these.
---------- Post added at 09:49 AM ---------- Previous post was at 09:02 AM ----------
Oh, btw, for my part it has to be a Magisk or similar root, since any visible root prevents me from using many apps I need to have, like VIPPS (Norwegian money transfer app), mobile banking, Google Pay and so on.
Mastiff said:
I wouldn't recommend that on a main upgrade. It can give unwanted consequences. I always advocate doing a full reset on these.
---------- Post added at 09:49 AM ---------- Previous post was at 09:02 AM ----------
Oh, btw, for my part it has to be a Magisk or similar root, since any visible root prevents me from using many apps I need to have, like VIPPS (Norwegian money transfer app), mobile banking, Google Pay and so on.
Click to expand...
Click to collapse
Thats the new verify thing from samsung.
The part is, that the system mount point is after init process. The init part has a dynamic mounting part and that is the problem actually.
The recovery rooting is also not working, of part from mounting issue.
I have check the mounting part, with a rooted recovery. At the moment we can not mount the system partition rw.
One way is to find a way patch the init part....but the way is open.
I hope john can help us....
Android 10 root solution found. Installed alexndr rom based on stock android 10. Working flawlessly with ElementalX kernel. Super smooth & snappy. This rom comes preloaded with Magisk root 20.3 & all the unnecessary stuff removed. Just flash the rom in twrp. No problems in flashing without wipeing data/factory reset. Completely stock looking firmware. No extra app added. Please check it out if anyone wants root on Andorid 10. Links below.
Alexndr Rom : https://forum.xda-developers.com/ga...-development/rom-u1arc5-devbase-v5-2-t3764822
Elemantal X Custom kernel : https://forum.xda-developers.com/ga...lopment/kernel-elementalx-1-00-s9-s9-t3767753
harshkumar07 said:
Android 10 root solution found. Installed alexndr rom based on stock android 10. Working flawlessly with ElementalX kernel. Super smooth & snappy. This rom comes preloaded with Magisk root 20.3 & all the unnecessary stuff removed. Just flash the rom in twrp. No problems in flashing without wipeing data/factory reset. Completely stock looking firmware. No extra app added. Please check it out if anyone wants root on Andorid 10. Links below.
Alexndr Rom : https://forum.xda-developers.com/ga...-development/rom-u1arc5-devbase-v5-2-t3764822
Elemantal X Custom kernel : https://forum.xda-developers.com/ga...lopment/kernel-elementalx-1-00-s9-s9-t3767753
Click to expand...
Click to collapse
After this modification, is the system "/" partition read/write "rw" mountable?
I wouldn't call that a solution, I'm guessing that this ROM isn't available in Norwegian Telenor version.
harshkumar07 said:
Android 10 root solution found. Installed alexndr rom based on stock android 10. Working flawlessly with ElementalX kernel. Super smooth & snappy. This rom comes preloaded with Magisk root 20.3 & all the unnecessary stuff removed. Just flash the rom in twrp. No problems in flashing without wipeing data/factory reset. Completely stock looking firmware. No extra app added. Please check it out if anyone wants root on Andorid 10. Links below.
Alexndr Rom : https://forum.xda-developers.com/ga...-development/rom-u1arc5-devbase-v5-2-t3764822
Elemantal X Custom kernel : https://forum.xda-developers.com/ga...lopment/kernel-elementalx-1-00-s9-s9-t3767753
Click to expand...
Click to collapse
Hey I'm on stock Android 10 already. How do I go about this? Flash TWRP and then this ROM? That's it?
TheXGX said:
Hey I'm on stock Android 10 already. How do I go about this? Flash TWRP and then this ROM? That's it?
Click to expand...
Click to collapse
Yes. Correct. 1st TWRP, then this rom. If you want to use any Custom Kernel like White Wolf or ElementalX, flash custom kernel after flashing the rom, then Magisk after it.
https://forum.xda-developers.com/galaxy-s9-plus/how-to/guide-root-s9-oem-fix-t3763974
Read carefully.
Caveat is that if you delete system apps you'll bootloop on restart
I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Philtyj said:
I've been trying to root my redmi9 for a couple of days now, with no luck. Downloaded the relevant firmware for my version to my pc, extracted it and copied the boot img over to my phone and copied over magisk manager APK too. On my phone I opened and installed magisk manager and proceeded to the install process then selected patch file and clicked install. Unfortunately each time that I do this I get the same outcome the message reads-
-Device platform: arm64-v8a
-Copying images to cache
! Process error
! Installation failed
I've uninstalled magisk and reinstalled, with the same outcome. Then I've downloaded my phone's firmware directly to my phone and tried to patch the boot IMG like that, but exactly the same outcome. Re-checked that I have the correct firmware for my version and it is, so I can't really understand what is going wrong and why I can't select a patch to send back to pc? Points of note, I haven't got my sim inserted and wondered if this could be a problem as I can't select the other two debugging settings on my phone without my sim inserted ( install via USB and usb debugging (security settings) options) but USB debugging is selected to on. My miui version is Miui global 11.0.7 stable 11.0.7.0(QJCEUXM)
If any body has an already patched IMG file that I can use, or can help me achieve this myself it would be very much appreciated.
Click to expand...
Click to collapse
New version of magisk has this error.if you have another phone then you use it to patch your boot.img..it will work...I am also doing this...for a unknown error magisk manager cannot patch boot.img in redmi 9....then I try to patch my boot.img on another phone and it can patch....follow the link.....
https://forum.xda-developers.com/showpost.php?p=83419803&postcount=1
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Philtyj said:
Hi, thanks for the reply. I'm not fully understanding what you're saying. How do I do this using another phone? Do I download magisk onto my other phone, then copy the boot IMG to the phone and patch the image? Then send the patch back to my pc to then flash the patch onto my redmi 9 via fastboot?
In your link, are these steps to follow to flash my redmi9 after creating the patch on my other phone?
Sorry for all of the questions, I'm new to this, it's my first attempt to root a phone and it seems that I've picked the hardest one to unlock and root!!
Click to expand...
Click to collapse
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Shas45558 said:
Yes...you can use any device to patch your boot.img file...there is no problem to do so....you can patch any boot.img in any device.....this new version of magisk manager has some issue with our redmi 9 ..so use another device and patch it..then flash patched boot.img via fastboot and follow the tutorial which I give you....
Click to expand...
Click to collapse
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
You do not need to install any custom ROM your stock ROM is ok. But you can try the gsi ROM...
Follow the link you can install GSI without any problem...
https://forum.xda-developers.com/showpost.php?p=83533901&postcount=1
EEA version have call recorder or not? i try global version not have call recorder
adiyanto said:
EEA version have call recorder or not? i try global version not have call recorder
Click to expand...
Click to collapse
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
maybe u can try Indonesia version. this version have call recorder. but i need for recorder my whatsapp phone.... ill try Any Call Recorder
aasiaasi said:
Hi Adiyanto,
Hope You're Doing Great..
Yes, You Are Right,
I Have Global Version It Doesn't Have Call Recorder And I Have Also Tried And Flashed EEA Version ROM And It Also Doesn't Have Call Recorder. So I Flashed The Redmi 9 Prime ROM Since It Has Call Recorder And Working Perfectly.
Note That, You Need To Unlock The Bootloader For This Activity. Or You Can Unlock Your Device Bootloader Then Root The Device Then Install Any Call Recorder In Any ROM That Works Perfectly.
Hope This Will Help You ...
Thanks,
MUHAMMAD Asif Qasim
Click to expand...
Click to collapse
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Philtyj said:
Hi there, thanks for the help, I've finally rooted my redmi9! One more thing that I wanted to ask. It's about the ROM. I've tried to find information on Google, but nothing comes up that replies to my question. After rooting with magisk, do I need to install a ROM or is my original Xiaomi ROM still ok and working? I'm not interested in installing a custom ROM, root was simply to gain access for installing a program/app. So I'm hoping my original rom is in tact and I'm good to go.
Click to expand...
Click to collapse
Can you share your magisk_patched.img ? Cause I tried to patch the image on another device, but the created image boot-loops only
Tried patching the image on the redmi directly, but the resulting patched image is only 10MB and obviously boot-loops.
Thanks.
naumanakram said:
Hi Qasim,
Would you please share the complete process of rooting and new img file restoration as I am new to this redmi9 am using this device in pakistan. Looking forward for your kind response
Regards nauman
Click to expand...
Click to collapse
Dear Nauman,
Greetings !!!
For Rooting Your Device Please Refer To This LINK. Or If You Just Want Call Recording Feature Then Flash Redmi 9 Prime ROM To Your Mobile.
Thanks,
MUHAMMAD Asif Qasim
Hi, I have decided to gather boot images and magisk patched images to one thread for now. I will try to edit this thread to be up-to-date. You can let me know what could you want next or if anything is wrong etc.
Stock boot.img files (direct links):
EU NE2213_11_A.12
Stock boot.img - link
EU NE2213_11_A.10
Stock boot.img - link
Magisk patched boot.img are here a file that can be downloaded (I am using magisk canary usually, but in Magisk, you can change the channel from the canary to stable etc.) - names as the versions come.
Below this there are those magisk patched files which you just flash (or boot and then flash directly from the Magisk app) via fastboot
Reserved
Don't you need to patch vendor_boot.img as well like OnePlus 9 pro ?
HessNL said:
Don't you need to patch vendor_boot.img as well like OnePlus 9 pro ?
Click to expand...
Click to collapse
Apparently not. I have patched that stock boot via magisk, then via fastboot boot <patchedimage.img> booted (and also tested if it actually boots) and when it booted, via magisk app I did "Direct install (recommended)", rebooted and done.
Oh okay you had a temporary boot we that's good to know well it works that's the most important thing ain't it
Noob question I been on locked bootloader for years so haven't been in the root scene, but I have US model NE2215 I'm guessing I need to wait for the firmware to be available to get the boot img? Did I just got my phone too early? Already oem unlocked now just waiting for twrp and root info. I always wanted a OnePlus phone because the community is big, but doesn't seem like much people upgraded from 9 pro.
HessNL said:
Oh okay you had a temporary boot we that's good to know well it works that's the most important thing ain't it
Click to expand...
Click to collapse
Yes, because this is probably and currently the most secure option to root it as we haven't got twrp available yet.
BuBbLeFIZzY said:
Noob question I been on locked bootloader for years so haven't been in the root scene, but I have US model NE2215 I'm guessing I need to wait for the firmware to be available to get the boot img? Did I just got my phone too early? Already oem unlocked now just waiting for twrp and root info. I always wanted a OnePlus phone because the community is big, but doesn't seem like much people upgraded from 9 pro.
Click to expand...
Click to collapse
That's not that you have it early. The phone itself is early in spite of rooting and doing things like rooting, custom recoveries, ROMs etc. I currently can't find boot img for your model, but once I do, I will post it here for you with patched one.
Thank you kouzelnik3 for this thread !
I was going to dl original firmware and patch it myself but found your thread in time with all ready to flash
Rooted OP10 pro done, now i can't wait to see some TWRP and roms in the future
fozzy056 said:
Thank you kouzelnik3 for this thread !
I was going to dl original firmware and patch it myself but found your thread in time with all ready to flash
Rooted OP10 pro done, now i can't wait to see some TWRP and roms in the future
Click to expand...
Click to collapse
You're really welcome, I wanted to unite those currently quite hard rooting stuff!
And yes, I can't wait to see twrp too!
Is there a known stock boot.img of the NE2215_11_A.10? I assume I shouldn't use the 2213_11_A.10.
GeekMcLeod said:
Is there a known stock boot.img of the NE2215_11_A.10? I assume I shouldn't use the 2213_11_A.10.
Click to expand...
Click to collapse
Not yet unfortunately. Or I don't know about it yet. :/
kouzelnik3 said:
Not yet unfortunately. Or I don't know about it yet. :/
Click to expand...
Click to collapse
Yeah.. I googled a lot last night once I got my phone trying to find it to root it. I need me that extra bit of customization.
Is there a way I can get it from my phone?
what am i doing wrong here rooted for 7+ years and some reason can't get this working.
Just moved over from ColorOS to Oxygen - when i try to flash the boot.img (patched one) all i get is this
Johnstan725 said:
what am i doing wrong here rooted for 7+ years and some reason can't get this working.
Just moved over from ColorOS to Oxygen - when i try to flash the boot.img (patched one) all i get is this
Click to expand...
Click to collapse
Ignore me but for anyone else that tries looks like i had to reboot bootloader and flash the img via bootloader...
thought it's normally flashed via fastboot?! weird phone
Johnstan725 said:
Ignore me but for anyone else that tries looks like i had to reboot bootloader and flash the img via bootloader...
thought it's normally flashed via fastboot?! weird phone
Click to expand...
Click to collapse
You should wipe the phone and start all over or else you won't be able to take ota updates. Never flash the patched boot image since you bypass the magisk backup feature. You have to wait for the full update package to update if you flash the boot. Ppl have previously had update issues after flashing.
g96818 said:
You should wipe the phone and start all over or else you won't be able to take ota updates. Never flash the patched boot image since you bypass the magisk backup feature. You have to wait for the full update package to update if you flash the boot. Ppl have previously had update issues after flashing.
Click to expand...
Click to collapse
Wiped the phone already, what difference would it make if i remove root or flash stock boot then flash ota and reflash boot?
Johnstan725 said:
Wiped the phone already, what difference would it make if i remove root or flash stock boot then flash ota and reflash boot?
Click to expand...
Click to collapse
Not sure what else magisk does during the backup process, but doing what you’re describing didn’t work for users on 8T and they usually ended up soft bricking. Everyone who flashed it vice installing from magisk app had to wait for op to post the full rom or for someone to post a repacked fastboot rom to update.
You do what you need to do, I’m just giving you some experience and recommendations since you just wiped and flashed the boot.
g96818 said:
Not sure what else magisk does during the backup process, but doing what you’re describing didn’t work for users on 8T and they usually ended up soft bricking. Everyone who flashed it vice installing from magisk app had to wait for op to post the full rom or for someone to post a repacked fastboot rom to update.
You do what you need to do, I’m just giving you some experience and recommendations since you just wiped and flashed the boot.
Click to expand...
Click to collapse
Interesting.
I moved over from ColorOS to oxygen OS, wiped the device then just booted a patched boot img, and installed direct.
I assume I flash ota and go onto magisk and do inactive slot? Where does the issue lie what method should I have gone down?
Johnstan725 said:
Interesting.
I moved over from ColorOS to oxygen OS, wiped the device then just booted a patched boot img, and installed direct.
I assume I flash ota and go onto magisk and do inactive slot? Where does the issue lie what method should I have gone down?
Click to expand...
Click to collapse
Hmmm. Well you should be fine if you patched the boot and let magisk do the install. I only suggested wiping since you said you flashed the img from the bootloader.
You might run into the same problem I have with the 9RT. I too upgraded from color to oos and couldn’t update at all, even though I rooted from the magisk app. I had to wait for someone to make a fastboot rom. I had no problems updating color following my method, but not oos after switching. Hopefully that’s not the case for you.
Install LineageOS 20 on SM-T290 and SM-T295 with Google Apps (MindTheGapps)
* Your warranty is now void. (It might already been)
* I am not responsible for any damage that it may do to your device. I WARNED YOU
* It's your choice to do it. Not mine. I just made it as I wanted to do it, but you have the choice to do so. If you choose to do it, you know that it may have consequences.
Click to expand...
Click to collapse
WARNING! This won't work on a bootloader with version U4! Flashing won't work and so you will not be able to use this guide. Unfortunately, you can also currently not downgrade the bootloader, making it impossible to get any custom stuff (custom recovery, custom ROM, etc.) on your device...
Hello there! This is another guide from me here on XDA Developers! Today, I will show you how to install LineageOS 20 on an SM-T290 and SM-T295, and yes, it works on both! Let's get started:
PrerequisitesBut first, make sure you have all of this:
An SM-T290 or SM-T295 tablet
TWRP (v3.7.0 recommended for SM-T290 and v3.5.2 for SM-T295)
Unlocked bootloader
1. Download LineageOS 20 ZIP from here (There stands it is for gtowifi, but it also works on the LTE model).
2. Choose the nightly build for the ZIP, it is very stable even though it is nightly.
3. OPTIONAL BUT I DO NOT RECOMMEND: You could also choose the recovery, but that's more like the stock recovery and I recommend you to keep TWRP as it has better features.
4. Download the ZIP that has the format 'lineage-20.0-YYYYMMDD-nightly-gtowifi-signed.zip'
- OPTIONAL: Download the recovery image for LineageOS 20 with the format 'lineage-20.0-YYYYMMDD-recovery-gtowifi.img'.
5. Download MindTheGapps from here.
6. Choose the one with the format 'MindTheGapps-13.0.0-arm64-YYYYMMDD_BBBBBB.zip'
7. Follow the links to download the ZIP file.
8. Place the LineageOS and MindTheGapps ZIP to an SD card or USB drive. If you choose to also take LineageOS recovery, you will also need to place the .IMG to an SD card or USB drive.
9. Insert the SD card or USB drive into your tablet.
10. Boot the device into TWRP.
11. Go to 'Wipe' > 'Swipe to Wipe'.
12. Then go once again to 'Wipe' > 'Format data' > 'Swipe to format'.
13. Go to install, make sure that it is not install image but as flash ZIP!
14. Use the select storage button to choose the storage where the ZIPs are saved.
15. Choose the LineageOS 20 ZIP and swipe to install.
16. Wait until it is done and now install MindTheGapps.
17. Optional step (depending on whether you have the following things):
- Install Magisk (root) ZIP if you have it. You could also do this later on.
- Install LineageOS recovery ZIP if you have chosen to use it. This can also be done later.
17. Click on 'Reboot system' or go to 'Reboot' > 'System'.
18. Wait until the boot is done.
19. Go through the setup, but WAIT! First read the step below.
20. Depending on whether you have LineageOS recovery or TWRP, you need to enable the option 'Auto-update LineageOS Recovery/LOS Recovery' in the setup if you have LineageOS/LOS Recovery and disable that if you have TWRP.
21. Once the setup completed, you are done!
That was easy to follow. Thank you.
Heeni said:
That was easy to follow. Thank you.
Click to expand...
Click to collapse
No problem!
Heeni said:
That was easy to follow. Thank you.
Click to expand...
Click to collapse
Nice. Guess you have LineageOS 20 right now.
Minionguyjpro said:
Nice. Guess you have LineageOS 20 right now.
Click to expand...
Click to collapse
Yes. I was previously running a GSI, but I like this better.
I'm not using Gapps, so I just skipped para. 16. I did install Magisk.
Does OTA update work with TWRP, or only with Lineage recovery?
Heeni said:
Yes. I was previously running a GSI, but I like this better.
I'm not using Gapps, so I just skipped para. 16. I did install Magisk.
Does OTA update work with TWRP, or only with Lineage recovery?
Click to expand...
Click to collapse
It does work with TWRP. It uses an OpenRecoveryScript. If you have Gapps (which you don't have), you need to reflash them afterwards. Also Magisk needs to be reflashed, but it is much easier to do than the stock!
How does this tablet with LineageOS work now?
Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?
dequadim said:
How does this tablet with LineageOS work now? Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?
Click to expand...
Click to collapse
I'm not sure, but it has some good features though. Some parts are a bit buggy, but most are not. It's also much faster.
Hello, thank you for the installation guide. Used my T290 and everything was working perfectly fine... I then decided to use LineageOS for MicroG and also everything ist working...
LineageOS 20 for MicroG:
gtowifi
My other SM-T295 is now on Bootloader5 (T295XXS5CWA1) so I think there is no way anymore to get LineageOS 20 on it. I now ordered a "new" SM-T295, which is supposed to be on Android 9. When I use the Guide above, is the cellular modul and LTE working with the CustomRom? Or should I use the GSI? Why is it such a different between those two devices?
SGX22 said:
Hello, thank you for the installation guide. Used my T290 and everything was working perfectly fine... I then decided to use LineageOS for MicroG and also everything ist working...
LineageOS 20 for MicroG:
gtowifi
My other SM-T295 is now on Bootloader5 (T295XXS5CWA1) so I think there is no way anymore to get LineageOS 20 on it. I now ordered a "new" SM-T295, which is supposed to be on Android 9. When I use the Guide above, is the cellular modul and LTE working with the CustomRom? Or should I use the GSI? Why is it such a different between those two devices?
Click to expand...
Click to collapse
Hello there! LTE will not be included, but you have 2 workarounds:
Make a hotspot over Wi-Fi with your phone or any other SIM device
Use the GSI ROM, which may have support
Well, LTE doesn't work, because of this: LineageOS is made on base of the drivers and packages of the device. And, they are almost the same I think, that's why the other stuff will or should work. But, the SM-T295 also has a driver and/or package for the SIM, LTE and so. And because it was originally made for the SM-T290, instead of an SM-T295, it will not include those drivers and so the support for it. You could try a GSI, although I had issues with it. But I may have done it wrong or so.., I always say: if there is an official custom ROM, use that over GSI, because it was really made for the device and includes the drivers and packages for the device. Although I don't really know whether GSI is bad, it may also work correctly..., if you try GSI, and it doesn't work, you could take a look at this: https://forum.xda-developers.com/t/gsi-lte-fix.3925151/
dequadim said:
How does this tablet with LineageOS work now?
Has it become more responsive than the original Samsung ROM or does it continue to suffer from the same exasperating slowness that characterized it?
Click to expand...
Click to collapse
In my opinion it is much faster and very responsive. It is really an improvement!
SGX22 said:
In my opinion it is much faster and very responsive. It is really an improvement!
Click to expand...
Click to collapse
Well, I will install it as soon as I can.
I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)
nima2005com said:
I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)
Click to expand...
Click to collapse
That's I think because your bootloader version is 4 or higher, instead of 3..., this updates after an update, and it can also not be downgraded for now. Bootloader version 3 has not got this protection that disallows flashing custom things like TWRP. Bootloader version 4 and higher do have...
Minionguyjpro said:
That's I think because your bootloader version is 4 or higher, instead of 3..., this updates after an update, and it can also not be downgraded for now. Bootloader version 3 has not got this protection that disallows flashing custom things like TWRP. Bootloader version 4 and higher do have...
Click to expand...
Click to collapse
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom
nima2005com said:
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom
Click to expand...
Click to collapse
Note: as i experienced you cant install Twrp on android 10 bootloader 3
nima2005com said:
I flashed TWRP on my T295 But unfortunately i got this eroor SECURE CHECK FAIL : recovery.img)
Click to expand...
Click to collapse
You can repair it quickly. Please search on youtube.
Deleted, need to search some further to make sure it is correct...
nima2005com said:
ok i haved installed this rom on T295 Android 9 Bootloader 3 And everything works .Thanks for making this awesome rom . the only bug i noticed is low brightness . i think oneui max brightness was higher than this rom
Click to expand...
Click to collapse
Hello, I ordered a "new" T295 with Android 10, but it is T295XXU4BUD3 as well, like my old T295. Is there still no way to get LineageOS on it.
I must say I am very disappointed now. I tried so many things bought 3!!! Devices.. It is just to much work to get LineageOS on a tablet. Is there any (small Tablet) that I can put LineageOS on with LTE which is working. Man, I am trying this for 2 years now..... What about Sony Tablets?
SGX22 said:
Hello, I ordered a "new" T295 with Android 10, but it is T295XXU4BUD3 as well, like my old T295. Is there still no way to get LineageOS on it.
I must say I am very disappointed now. I tried so many things bought 3!!! Devices.. It is just to much work to get LineageOS on a tablet. Is there any (small Tablet) that I can put LineageOS on with LTE which is working. Man, I am trying this for 2 years now..... What about Sony Tablets?
Click to expand...
Click to collapse
Well, an old Samsung Galaxy Tab 4 with LineageOS 18.1 (Android 11). I helped someone today to get it on his device! It was very easy to do, so.