Related
Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!
Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.
I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?
I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgzWith miflash-20220218 in edl mode .
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
just calm down and try to unlock bootloader again by (miflash_unlock) then install in computer (adb-setup-1.4.3) then keep press on power and volume down button for fastboat then open miflash (version=2017.4.25.0) and connect your phone and press refresh to see your phone on list then download India Stable Firmwares version in same thread you mention and unzip the file and unzip the result file then you will see 12 file (images/ flash_all.bat .....) and in miflash choose the file and press flash and wait... when its done your phone will work but will give account is locked just connect with wifi and write your micloud password and done .
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Miflash only works on an unlocked bootloader. It appears that you have a Chinese Model and you just did what was supposed to be avoided. You should get accustomed to Miflash moving forward. Never use Flash_All_Lock while cross flashing China/Global roms. You'll have to wait to unlock your Bootloader now and post that flash the China rom to get back. If any time you wish to move to the India rom, either use a twrp recovery or just use Flash_All while using the fastboot image which should eventually avoid locking the bootloader
Sent from my Redmi K20 Pro using Tapatalk
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
hippo2s said:
Hi All, I did the same thing - whoever build the UI for MiFlash should be shot - why default that selection to something that will be undesirable!!?
Anyway, i tried to flash indian rom and forgot to set to Clean All, it locked the bootloader.
So i now have redmi recovery and Fastboot options only on phone.
Have tried fastboot + miflash but all options (now with Chinese rom) - says Erase Boot Error.
Tried MiAssistant + Mi PC Suite - it is not detecting the phone in either MiAssistant recovery mode nor Fastboot mode. what is weird is the phone and connector animation on phone is correctly depicting when it is plugged in/unplugged. But the PC suite isnt detecting the device.
Soft bricked - *sigh.... any help will be greatly appreciated from the community
BTW i am more worried that the phone will run out of battery and never wake up once battery drains completely as it is in bootloop into Redmi recovery and can't be turned off (someone tell me how!?) - I don't see the phone respond to charging in any state... : (
Click to expand...
Click to collapse
Read this https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012
And this
https://forum.xda-developers.com/k20-pro/help/k20-pro-bricked-t3951531
You're probably going to have to open up the phone and pay $20 for someone to use their authorised account to flash an official ROM whilst remoting in to your PC.
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
hippo2s said:
Some great ideas - Just tried to unlock bootloader - This device came pre-unlocked so the device is tied to the seller's account.
I have unlock permission - but unlocker say device is not bound to my account matching my assumptions - anyone know what's the best way to re-claim ownership? Especially when I can't get into ROM at all?
Click to expand...
Click to collapse
My comment was meant for OP but I hoped it would help you as well! I am personally not well informed about the Xiaomi / Redmi ownership situation when the seller unlocked the phone.. maybe you can contact them and get a corresponding password to the account, it has been the solution I have seen offered here. Maybe the emergency flash solution from Robbo.5000 works?
I just got this phone a week now and was only able to unlock and flash yesterday, I was aware of the ownership problem thanks to this forum so I bought the sealed CN version. Hope you figure it out!
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
322Reznov said:
Can you still reach fastboot? If so you can unlock phone again and flash TWRP using ADB. After that boot straight into TWRP and connect it to your computer, internal SD storage should then automatically mount. Drag and drop ROM .zip into internal storage, use TWRP file manager to move it out of the data folder and do a default wipe using TWRP. Then flash .zip ROM (for example xiaomi.eu stable) and you should be back in business. Please let me know if you need any files like working recovery image and further instructions.
I had some trouble with my TWRP recovery yesterday, flashed it on unlocked bootloader with Chinese stable ROM installed, on reboot out of fastboot it boots straight into ROM and overwrites the TWRP recovery with default recovery. I fixed it by flashing recovery again, boot straight into it and flash xiaomi.eu stable, now recovery is TWRP and does not get overwritten.
Click to expand...
Click to collapse
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Mooatreides said:
You need yo flash magisk after you flash twrp if you want to run regular miui, to prevent it from overwriting the recovery. Its the same on poco and all xiaomi phones
Click to expand...
Click to collapse
Ah alright thank you for the info! This is my first ever Xiaomi / Redmi phone haha
dsown said:
The situation is that I just bought the K20 Pro. Then i unlock and flash by miflash with Global Rom via this thread then the device has bricked and has the message "This MIUI version can't be installed on this device".
Tried boot into recovery but the TWRP has gone and the bootloader has been locked.
Flash back to China Rom by miflash is doesn't work either, help me please, i don't know what to do now, i tried every thing i can.
:crying::crying:
P/s: Sorry for my bad English.
Click to expand...
Click to collapse
Did you flash the global rom on an existing running Chinese rom or on an empty device (formatted)? Just for myself cuz I'm not sure whether to unlock and then unable to relock. Thanks.
pungky771 said:
1. if you can still enter fastboot mode, there is a possibility that you can do TWRP flashing again (the TWRP version must be correct so that the data on the cellphone can be read properly) / Flashing from the PC (if you are lucky, the flashing will work properly without any problem or you can bypass the bootloader locked using software or something else). [make sure ROM version must be appropriate because this is very crucial]
2. You can try using the test point method (EDL / Emergency Download Mode) [This method is usually used if your K20Pro is constrained by Hardbrick due to ARB4] , but this method requires you to open the case / body behind your K20Pro. and I cannot guarantee that the flashing process will succeed easily because in some cases if the K20Pro is detected damage / error due to ARB4, then you are required to have an Authorized Mi Account. I might be able to help you remotely, if you agree with the risks & requirements in the flashing process (I can lend my account, but it's not free).
Click to expand...
Click to collapse
My k20 pro is hard bricked and i cant get fast boot or any thing it wont even come on. Assistance please
hippo2s said:
Thanks guys. I am going for the Test Point solution - have made contact with the Russian tech the others did and made an appointment. I just have to pretend to be Jerry Rig before then and open her up! Fingers crossed!
Click to expand...
Click to collapse
Could you please point me to the person you have contacted?
I'm in EDL for about two weeks now, unable to solve it by different means (seller sais 'send it back', which I'm not goong to do; S-unlock has the service unavailable, even though I've paid them and the guy I contacted there tried through TW to no avail, waiting for a 'money back' now)..
Hey Guys,
One of my younger brother some how managed to brick a stock 4A, and when starting it up, its stuck at the MI logo, however I am able to go in the Fastboot and stock recovery via the side volume and power buttons and the phone is charging while powered off.
I have tried factory resting via the stock recovery, but no use, still stuck at the logo.
Is there any app or software like odin (for Samsung), where I can flash a stock Rom in fastboot via my pc? If so can you please share the link to the thread or step by step instructions to do so?
i want to share again, its stock with no Xiaomi account or any USB debugging enabled from the developer options as it is pure stock. I have also attached the pictures of the phone with this message (I know it won't help, but just in case).
I want to thank every one for giving me their time in assisting me in resolving this issue.
Have a great day.
This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process
rseragon said:
This guide might help you
http://www.99mediasector.com/flash-xiaomi-device-without-unlock-bootloader/
For procedure you can refer
Sorry not able to help u fully because of my time issues
According to me u can still flash miui ROM via fast boot (even when locked)
Use mi flash tool for that (link
https://xiaomiflashtool.com/ )
U need to only use fast boot roms to flash
Link http://en.miui.com/a-234.html <---- select redmi 4a global rom from it
See the YouTube vid for process
Click to expand...
Click to collapse
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.
Hassan Aftab said:
Thank you bro, I tried, it, firstly it said Error: Flash Tz error" on flashing the rom via Mi flash. I did extracted it two times as stated and also tried extracting it once and I also tried placing the folder in C:/ drive (root), but the problem persists.
Also, I tried changing the drivers in device manager, but no use. I also downloaded ADB drivers, which gave me Xiaomi adb boot loader drivers but same issue.
Regarding the EDL, double clicking on edl.cmd, just reboots the phone to "MI" logo again and no black screens or red led light to show that its in the EDL mode, and I did tried flashing on the MI logo but the same results.
Please help.
Click to expand...
Click to collapse
Wow wait were u trying edl or fastboot
The method I provided is for fastboot not for edl(though most of it same except u need to remove the back cover and do something)
If u think u can really do edl mode flashing the see this vid
Link :-
I think edl is the only method to fix this problem
I reccomend you to give ur phone to a shopkeeper to do it
If u think u can DL the thing that guy did in that vid u r free to go ahead
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
You give problem because your'Mg3 not yet uninstall root complete, so Android system prevent it booting.
=> Solution:
- Step 1: re-unbrick your phone with unbrick tool (eu).
- Step 2: reboot to bootloader.
- Step 3: fastboot oem nubia_unlock NUBIA_NX629J
- Step 4: use volumn up or down to choose line with content "unlock bootloader". Then wait for your phone working. => Done
≠==========================≠
|Source: sSjBlue197 (vietnamese).|
|Contact: fb.com/ssjblue197. |
≠==========================≠
Nanilucky11 said:
iam using RM3 recently i shifted from global rom to chinese because it is andriod 11.and rm v3 so i used it for few days but i need google services so i thought about rooting .I installed all required files .the problem begins here when i connected it to my pc it didnt detect anything....i heard new cn version doesnt have mtp or usb connection so i used unbrick tool(eu) for stock rom ..now it got stuck in currpted.i need some help ...i tried different ways...under adb devices the device is not showing so i cant do manually.one more thing when i use unbrick tool(eu) it show firehose file downloaded ....but in unbrick tool(non-eu) it says cannot download firehose file.
.
.
Help me someone!
Click to expand...
Click to collapse
Enter bootloader POWER BUTTON+VOLUME DOWN
Use PC enter adb command :
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
Then, reboot device
enter command
"fastboot reboot"