I rooted my phone but didn't really like it while having my banking apps on it. So I tried to get back to normal but ended up wiping everything, even the OS, off of my phone. I am trying to get it back to normal. I followed one guide on here which gave me an android 10 ROM but I was unable to update it to the latest version. The link for that guide is: https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835. I didn't install the force encrypt or the magisk because I don't wanna root it. I just want it back to how it was before the root. So I am wondering if there is a way that I can get back to normal now. Thanks in advance for any advice.
Tyche303 said:
I rooted my phone but didn't really like it while having my banking apps on it. So I tried to get back to normal but ended up wiping everything, even the OS, off of my phone. I am trying to get it back to normal. I followed one guide on here which gave me an android 10 ROM but I was unable to update it to the latest version. The link for that guide is: https://forum.xda-developers.com/mi-a2/how-to/guide-official-stock-android-10-t4033835. I didn't install the force encrypt or the magisk because I don't wanna root it. I just want it back to how it was before the root. So I am wondering if there is a way that I can get back to normal now. Thanks in advance for any advice.
Click to expand...
Click to collapse
well what is the problem ? if it booted and you didn't flash magisk you are on stock. ...what exactly do you want ? to lock the bootloader or remove twrp custom recovery too ?
KevMetal said:
well what is the problem ? if it booted and you didn't flash magisk you are on stock. ...what exactly do you want ? to lock the bootloader or remove twrp custom recovery too ?
Click to expand...
Click to collapse
The ROM was an earlier version of android 10. But I am unable to install the latest updates for android 10 OTA. It's working but I would like to be able to receive updates again. If there is another ROM that would give me those results I would be fine with flashing that too.
Tyche303 said:
The ROM was an earlier version of android 10. But I am unable to install the latest updates for android 10 OTA. It's working but I would like to be able to receive updates again. If there is another ROM that would give me those results I would be fine with flashing that too.
Click to expand...
Click to collapse
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
Awesome, thanks! I will try that later tonight or tomorrow.
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
So I downloaded a fastboot file from here :https://forum.xda-developers.com/mi-a2/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824849
The miui flash program wouldn't work for me. On the website you linked me there was a method that used twrp to flash it. But when use twrp I can't see any of the zip files in twrp. I've tried three different ones from the link I just shared here. Not sure what the problem is.
KevMetal said:
the most likely issue is your recovery ... take the stock recovery from a fastboot stock rom and flash that with fastboot
also make sure to flash stock rom in both slot A & B then updates will work
go to this website
https://www.getdroidtips.com/xiaomi-mi-a2-stock-firmware/
download a PIE stock rom that is a FASTBOOT version ... download miflash ...follow instructions to flash it using miflash in fastboot mode
then boot & set it up ...it will start offering updates by itself
your problem right now is that you flashed stock rom in only one slot and you have a custom recovery so that is why it can't update
Click to expand...
Click to collapse
nevermind, I have gotten it to work. Thank you for your help
Tyche303 said:
nevermind, I have gotten it to work. Thank you for your help
Click to expand...
Click to collapse
okay glad you came right
half the fun is figuring this stuff out
Related
HEEELP!
I downloaded CyanogenMod (11) but I've got wrong firmware.
I cannot update firmware tried MicroSD (T4_SDUPDATE.zip), tried 2 go back 2 stock (Stock recovery.img+ jb-4.3_ota-full_tf701t-macallan.zip), nothing works.
I got firmware ww_epad-10.26.1.7 , need atleast 2 be on bootloader/firmware version 10.26.1.18 or higher!
I really need your help.
If your computer can detect the tablet in fastboot mode then you should be able to flash an image. If not then oops! You need to download the latest WW firmware from the ASUS website and flash it with your computer...
K94U said:
If your computer can detect the tablet in fastboot mode then you should be able to flash an image. If not then oops! You need to download the latest WW firmware from the ASUS website and flash it with your computer...
Click to expand...
Click to collapse
Well Thanks. I've alredy tried 2 download the lastest WW firmware (10.26.1.18 SKU renamed it T4_SDUPDATE.zip) and even tried via MicroSD card. I've also tried 2 "go back" - stock recovery - 2 update my bootloader/firmware, did not work either. (Used jb-4.3_ota-full_tf701t-macallan.zip + stock recovery.img).
Iam wondering if it might be my MicroSD card, do you need 2 format microSD to FAT32? Will it make so much difference?
Very grateful for any help, feels like I've tried everything.
To update your bootloader on your www region tab:
http://forum.xda-developers.com/showpost.php?p=61045480&postcount=2
I believe that will flash TWRP along with it (you can boot CWM to flash it).
If you want to put back the stock recovery after flash, fastboot flash recovery recovery.img using the latest stock recovery from droidbasement. You can also flash in the latest CWM (from droidbasement) if you like, if you are intending to stay with CM11.
pershoot said:
To update your bootloader on your www region tab:
http://forum.xda-developers.com/showpost.php?p=61045480&postcount=2
I believe that will flash TWRP along with it (you can boot CWM to flash it).
If you want to put back the stock recovery after flash, fastboot flash recovery recovery.img using the latest stock recovery from droidbasement. You can also flash in the latest CWM (from droidbasement) if you like, if you are intending to stay with CM11.
Click to expand...
Click to collapse
Thanks alot again. will try!
MiNnLi said:
Thanks alot again. The link/download page for the lastest BOOTLOADER FOR WW (zip) does not work for me tho. Does it work for you?
Click to expand...
Click to collapse
Doesn't appear so. Please liaise with sbdags for it.
Heeelp
I really need help again.
The Link to the ww firmware did not work.
I would be so so grateful if someone could explain (in steps) what I should/could do.
I cannot use My transfomer tab it laggs to much couse of the wrong firmware.
How can I get the newest firmware when i already downloded cyanogenmod (custom rom)
Thanks!
The latest firmware version for you is ww 11.4.1.30
Try this link: http://forum.xda-developers.com/devdb/project/dl/?id=13428
pershoot said:
Doesn't appear so. Please liaise with sbdags for it.
Click to expand...
Click to collapse
I need 2 find my old stock version, go back to it and the OTA. All I really need is the pure img files for system, recovery and boot.
Can you help me?
Hey so if this has been covered elsewhere please let me know, but I'm hoping to revert back from my Nougat rom to MIUI8 and return to the standard recovery.
What is the correct procedure for this? Can I just flash the MIUI8 rom with TWRP?
Thanks in advance people.
Hamsteh said:
Hey so if this has been covered elsewhere please let me know, but I'm hoping to revert back from my Nougat rom to MIUI8 and return to the standard recovery.
What is the correct procedure for this? Can I just flash the MIUI8 rom with TWRP?
Thanks in advance people.
Click to expand...
Click to collapse
Maybe this helps? http://forum.xda-developers.com/mi-5/help/how-to-revert-cm14-to-miui-t3516986
Obviously you can't flash MIUI with TWRP if you are on CM or some other custom ROM. You need miflash.
Nbkdnssr said:
Maybe this helps? http://forum.xda-developers.com/mi-5/help/how-to-revert-cm14-to-miui-t3516986
Obviously you can't flash MIUI with TWRP if you are on CM or some other custom ROM. You need miflash.
Click to expand...
Click to collapse
Thanks heaps mate, so seems like the procedure is as follows:
gaz090 said:
Yeah first time I did this I hard bricked the phone. This is the process I use now:
1) Download MiFlash
2) Download Mi5 Fastboot ROM that you want to use
3) Reboot phone into Fastboot
4) Put phone into EDL using the command "fastboot oem edl" (without quotes)
5) Launch MiFlash - it should detect it as a COM device. Flash the ROM you downloaded earlier.
6) Once it's done, you'll be back to original MIUI. Be aware that this also flashes the recovery too, so you'll need to reinstall TWRP if you want to use it.
Click to expand...
Click to collapse
I'm going to souce MiFlash and the latest fastboot ROM from here: http://en.miui.com/a-234.html
Just an update, the procedure above worked perfectly.
I am now running MAAMIDI with stock recovery.
Thankss heaps for the help Nbkdnssr!
OZIP's FOR RMX2001«Android 10»ㅤㅤ ㅤㅤㅤㅤ ㅤㅤㅤㅤㅤㅤㅤ Click Here
«Android 11»*Team Drive Gone Will Find And Update
Need Help?
Contact Me On Telegram
-GROUP LINK-
Awesome!! Can I dirty flash ui2?
Android 11 update (C12 Global) failed, why?
Not flashing ui 2
Ferbir88 said:
Android 11 update (C12 Global) failed, why?
Click to expand...
Click to collapse
it cant be flashed directly u should flash ozip using custom recovery but after flash , flash patched vbmeta too otherwise u got brick for more info ask in ofiicial realme 6 main telegram group
xdriv3r said:
Not flashing ui 2
Click to expand...
Click to collapse
u cant flash it by stock recovery read other comment reply
unique_sandesh said:
it cant be flashed directly u should flash ozip using custom recovery but after flash , flash patched vbmeta too otherwise u got brick for more info ask in ofiicial realme 6 main telegram group
Click to expand...
Click to collapse
I tried not working (bootloop). I lfashed patched vbmeta. I installed it with custom recovery
Ferbir88 said:
I tried not working (bootloop). I lfashed patched vbmeta. I installed it with custom recovery
Click to expand...
Click to collapse
tell meyour all process sir , and they also need format
unique_sandesh said:
unique_sandesh said:
tell meyour all process sir , and they also need format
First, I flashed stock b.53 firmware with SP flashtool and I update with stock recovery to b.65. For the second time I need root the firmware and patch vbmeta, because missing the custom recovery without this step.( orange fox recovery)For the third Time I flash the c.12 firmware with custom recovery, and reboot to bootloader from recovery than I patch c.12 vbmeta. For the last Time I reboot and the end result bootloop.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
unique_sandesh said:
tell meyour all process sir , and they also need format
Click to expand...
Click to collapse
First, I flashed stock b.53 firmware with SP flashtool and I update with stock recovery to b.65. For the second time I need root the firmware and patch vbmeta, because missing the custom recovery without this step.( orange fox recovery)For the third Time I flash the c.12 firmware with custom recovery, and reboot to bootloader from recovery than I patch c.12 vbmeta. For the last Time I reboot and the end result bootloop
ofc it will not boot untill u format data , u need to format data . give these cmd fastboot -w , fastboot erase userdata
unique_sandesh said:
ofc it will not boot untill u format data , u need to format data . give these cmd fastboot -w , fastboot erase userdata
Click to expand...
Click to collapse
Thank you very much now It works, but I want to ask you: Why can not i enter in recovery Mode? I tried the power on and volume down combination, but the phone enter only fastboot mode with "oplus verification failed" message. If I do a factory reset under the Android, the phone load the recovery, until resetting.
Ferbir88 said:
Thank you very much now It works, but I want to ask you: Why can not i enter in recovery Mode? I tried the power on and volume down combination, but the phone enter only fastboot mode with "oplus verification failed" message. If I do a factory reset under the Android, the phone load the recovery, until resetting.
Click to expand...
Click to collapse
from rmui 2.o we only get in fastboot mode. for recovery give this cmd fastboot reboot recovery, , and ignore that oppo verify failed msg
unique_sandesh said:
from rmui 2.o we only get in fastboot mode. for recovery give this cmd fastboot reboot recovery, , and ignore that oppo verify failed msg
Click to expand...
Click to collapse
Thank you very much!
Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply
Jegwaar said:
Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply
Click to expand...
Click to collapse
were the same situation and i dont know what to do. Please help us.
which is the process 4 install? im on rui 1.0
Kodize said:
which is the process 4 install? im on rui 1.0
Click to expand...
Click to collapse
using custom recovery
Rollback With Custom Recovery
This Method Only For Realme 6/6i(indian)/6s _____________________ RMUI2.0 TO RMUI 1.0____________________________________________ This Method For Downgrading From F2Fs Based Custom Roms ⓿ Flash Latest TWRP (Gofaraway One) ❶ Go to manage partitions And Select...
telegra.ph
Jegwaar said:
Hello everyone don't know why but i didn't get realme ui 2.0 update I'm stuck on B.65 for RMX2001 and as i recall i once rooted it unlocked bootloader but i relocked it and unrooted it to with all its ROM and Recovery set to default and i exited In-depth test too but i didn't get 2.0 update last updated version is B.65 so i wanna know if i download the file mentioned above and install it will it work.... Please reply
Click to expand...
Click to collapse
keep unlockd your bl and use spft for flashing rui 2 make sure you selected download only in spft while flashing here is the latest decrypted firmware link https://t.me/rmx2001_clouds/7
unique_sandesh said:
keep unlockd your bl and use spft for flashing rui 2 make sure you selected download only in spft while flashing here is the latest decrypted firmware link https://t.me/rmx2001_clouds/7
Click to expand...
Click to collapse
Hi guys, did someone do this ? i'm in the same situation after rolling back to B55 using stock recovery, now stuck on B65, no update coming.
Bootloader is unlocked, when i flash a C18 firmware with SPF phone bootloop in fastboot mode.
Only flashing a B65 firmware with SPF to get phone boot corretly.
I just need to known if this method is tested with the given C19 firmware ?
Many thx.
Picked one of these up on the weekend and was looking at going to linageos.
patched upto latest, and went through the linage install steps but missed the step on after installing the bootloader unlock software going into options and unlocking.
Went ahead and installed the linage recovery but now just get a basic screen with options of
START
RESTART BOOTLOADER
RECOVERY MODE
POWER OFF
All options loop me around back to the same place.
trying to start, ends me up with a your device is corrupt message.
I've been trying to get it back to factory.
QPST and QFIL can't see the device.
i can see the device in fastboot.
have downloaded latest firmware.
extracted using payload_dumper
no recovery.img on there.
updated the boot.img, vendor_boot.img dtbo.img from Question - My Asus Zenfone 8 flip is STUCK in CSC FASTBOOT MODE PLZ HELP!, RAW FIRMWARE ANYONE??? | XDA Forums
but no luck as there is no recovery.img in the firmware package.
Any ideas?
Somewhere there was FW update (at least I remember .115) to downgrade from beta A12 to .115FW (android 11). And it could help you I hope. At least you can try.
Yeah all is not lost. Etract and run this to get you back to factory stock. If you can't connect with fastboot, it's a driver issue and you'll just have Google it and pay around until you get the driver right.
Firmware I'm on would be WW-30.12.112.62 i think
is that android 11?
thatguy222 said:
Yeah all is not lost. Etract and run this to get you back to factory stock. If you can't connect with fastboot, it's a driver issue and you'll just have Google it and pay around until you get the driver right.
Click to expand...
Click to collapse
Thanks, will give this a go
no luck, same message.
That link doesn't have a recovery.img either.
am I missing something
running fastboot for boot.img and vendor_boot.img
fastboot flash boot D:\asus\payload_dumper-master\output\boot.img
fastboot flash vendor_boot D:\asus\payload_dumper-master\output\vendor_boot.img
is there more img's i'm meant to be flashing?
Onthax said:
no luck, same message.
That link doesn't have a recovery.img either.
am I missing something
running fastboot for boot.img and vendor_boot.img
fastboot flash boot D:\asus\payload_dumper-master\output\boot.img
fastboot flash vendor_boot D:\asus\payload_dumper-master\output\vendor_boot.img
is there more img's i'm meant to be flashing?
Click to expand...
Click to collapse
I was once stuck in a bootloop after flashing a custom rom and did a fresh install of official firmware.
Go to this website https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11" section. There you can download the firmware file and a 3 step instruction.
By doing so I was able to bring back my phone.
The version of the firmware is from 2021/09/03 (WW-30.11.51.115) so you just need to update to newest release and everything should be fine.
T3chDelicious said:
I was once stuck in a bootloop after flashing a custom rom and did a fresh install of official firmware.
Go to this website https://www.asus.com/Content/Android-12-Beta/ and scroll down to "How to opt-out and revert back to Android 11" section. There you can download the firmware file and a 3 step instruction.
By doing so I was able to bring back my phone.
The version of the firmware is from 2021/09/03 (WW-30.11.51.115) so you just need to update to newest release and everything should be fine.
Click to expand...
Click to collapse
Thanks T3chDelicious
That did the trick, back to a working stock phone
Onthax said:
Thanks T3chDelicious
That did the trick, back to a working stock phone
Click to expand...
Click to collapse
You're welcome
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/rosemary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
OK nevermind I successfully got the phone booting again with miflash tool by reflashing an official firmware...
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/t/twrp-on-android-12.4522273/), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Click to expand...
Click to collapse
Hope it helps! ; D
dona3000 said:
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/ros mary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
Click to expand...
Click to collapse
Did u make sure ur on Miui 12.5.16.0.RKLMIXM?
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
fol!s said:
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
Click to expand...
Click to collapse
Greetings!
As this phone has an MTK processor, we don't really have a recovery image, it's stored in the boot img I suppose. That link, you can download the official rom to this. DISCLAIMER: There are two types of ROMs listed here, one type is fastboot, that you need now in order to flash it through a computer for example. The another type is the recovery rom, that you can flash from recovery like a magisk package, or anything flashable zip, or with adb sideload.
https://mifirm.net
You should choose global if you are in Europe, but it's suitable for devices in the US or USA probably, ony feature differences are here between an EEA and Global rom.
Also, if you install pixel experience recovery, you can install the firmware by going into recovery, and do it via sideload. Or, you can try flashing the rom with TWRP (tutorial linked below), but then you won't able to install updates automatically.
One question: Did you checked in OEM unlocking in developer options before flashed PE?
Hope it helps!
Yeah, I did checked the oem unlocking. I think the reason why i failed because my bootloader probably updated and I forgot to check. You need bootloader version 12.5.16.0.RKLMIXM to install the pixel experience. Also thank for help
Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/members/gurtnyi.11842195), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Hope it helps! ; D
Click to expand...
Click to collapse
Can I do that on newer firmware or should I roll back to version 12.5.16.0.RKLMIXM? And if I roll back then I need to unlock device again?
I think you can. I've flashed it successfully on the latest version too. Currently I don't use PE but it was good for me.
Well, regarding to the unlock, it's not a big deal, you don't have to wait 168h again, once you've firstly unlocked your device, you can re-unlock it again, and again, no matter how many times, you don't have to wait a lot again.
But depending on how you rollback it,
I mean, with xiaomi flasher (i think that's its name) you can choose between clean all and lock, save userdata, and clean all, but in the first case, it'll lock back the bootloader. With SP flash tool (if you need, I can provide a link for the modified version of it, that doesn't require an auth file, but if fails, you need a python script, I can link that too), as I remember it won't lock back the device, but I'm not a 100% sure
Hope it helps!
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
raven17a said:
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
Click to expand...
Click to collapse
Corrected, thank you!
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
raven17a said:
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
Click to expand...
Click to collapse
Happy to hear that!
By the way, yes, pe recovery is better for sideloading, or eventually any not stock recovery. Also, if you install PE recovery, you can apply updates automatically, and in the future you won't need to flash it manually.