Hello,
I'm desperately looking for a way to root and install the twrp efficiently and simply without damaging the phone please.
What is the right and direct method to do it on Android 10 and G973FXXS5CTD1 please ?
Thank you in advance for your help.
PS : Sorry for the inconvenience but it's not to fool me.
https://forum.xda-developers.com/ga...ecovery-twrp-3-3-0-galaxy-s10-exynos-t3924856
And
https://forum.xda-developers.com/galaxy-s10/development/magisk-root-galaxy-s10-series-t3918699
Hello StoneyJSG,
Thank you for your answer.
I would like to know out of distrust what's the best order to root it please ?
- TWRP then ROOT (it's possible to flash TWRP patched by Odin first ?)
or
- ROOT then TWRP
Because this time the way to root this phone is very different from previous years.
But I really want rooted this phone also like my previous Samsung phones
Thank you again in advance.
What do the guides say? From my experience with the Galaxy S4, you would root first then install TWRP. I now have a G973U phone with a locked bootloader so I can't root or install TWRP.
MobAndro said:
Hello,
I'm desperately looking for a way to root and install the twrp efficiently and simply without damaging the phone please.
What is the right and direct method to do it on Android 10 and G973FXXS5CTD1 please ?
Thank you in advance for your help.
PS : Sorry for the inconvenience but it's not to fool me.
Click to expand...
Click to collapse
Follow this https://forum.xda-developers.com/galaxy-s10/how-to/proper-to-root-s10-device-twrp-s10-10e-t4015813 I am in the process of writing a guide with working links but this guide will get you through, worked for me.
Hello Joe333x,
Thank you for your answer.
Unfortunately for me, following this tuto, with Odin3_v3.13 and Odin3_v3.14 it doesn't work because the flash ends at 22, 23s every time followed by boot loop. But I succeeded to enter in recovery stock and make a factory reset every time also.
I got magisk_patched.tar & magisk_patched.img with MagiskManager 7.5.1 for AP-G973FXXS5CTD1.
I renamed magisk_patched.img in recovery.img then I opened the magisk_patched.tar with 7-zip and I deleted the current recovery.img. I added the new recovery.img patched inside.
I put the magisk_patched.tar in AP on Odin with BL, CP and HOME_CSC of the stock ROM G973FXXS5CTD1.
The recovery used is twrp-beyond1lte-3.3.1-104_ianmacd.img for stock ROM G973FXXS5CTD1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What I've done that's wrong please because I don't understand... and Thank you again in advance.
PS : MagiskManager creates magisk_patched.tar and magisk_patched.img on "storage/emulated/0/download" and not in the SD card for me.
MobAndro said:
Hello Joe333x,
Thank you for your answer.
Unfortunately for me, following this tuto, with Odin3_v3.13 and Odin3_v3.14 it doesn't work because the flash ends at 22, 23s every time followed by boot loop. But I succeeded to enter in recovery stock and make a factory reset every time also. You may also want to watch the video at the end of that guide, it differs slightly from the guide but is still informative.
I got magisk_patched.tar & magisk_patched.img with MagiskManager 7.5.1 for AP-G973FXXS5CTD1.
I renamed magisk_patched.img in recovery.img then I opened the magisk_patched.tar with 7-zip and I deleted the current recovery.img. I added the new recovery.img patched inside.
I put the magisk_patched.tar in AP on Odin with BL, CP and HOME_CSC of the stock ROM G973FXXS5CTD1.
The recovery used is twrp-beyond1lte-3.3.1-104_ianmacd.img for stock ROM G973FXXS5CTD1.
What I've done that's wrong please because I don't understand... and Thank you again in advance.
PS : MagiskManager creates magisk_patched.tar and magisk_patched.img on "storage/emulated/0/download" and not in the SD card for me.
Click to expand...
Click to collapse
Are you making sure that under options in Odin you don't have "reboot" checked. After flashing you need to boot immediately from download mode into recovery mode to flash the multi disabler. Also are you already on CTD1? Personally I flashed CTD1 unmodified and booted up and made sure everything was working before going ahead.
Joe333x said:
Are you making sure that under options in Odin you don't have "reboot" checked. After flashing you need to boot immediately from download mode into recovery mode to flash the multi disabler. Also are you already on CTD1? Personally I flashed CTD1 unmodified and booted up and made sure everything was working before going ahead.
Click to expand...
Click to collapse
Hello Joe333x,
I made all the recommendations given because I used to root with Odin all my previous Galaxy Phones.
But in the picture we see clearly in green that Odin flashed magisk_patched.tar in 22 seconds instead of 3 or 4 minutes usually ; which was not normal because the root did not pass.
StoneyJSG and Joe333x -> Thank you very much to you 2 for your help because my phone is rooted with Magisk, TWRP and EDXPOSED successfully until now
matador84 said:
I would like to know out of distrust what's the best order to root it please ?
Click to expand...
Click to collapse
Hello,
Do you just want the root or do you also want the TWRP ?
confirmed none of this works, it just boots back into stock recovery like the other tutorials on youtube
phaze3131 said:
confirmed none of this works, it just boots back into stock recovery like the other tutorials on youtube
Click to expand...
Click to collapse
ok so reporting back, I am finally rooted.
I wish I had the ability to change the original post to include this information but I do not have that ability.
Different versions of magisk patch files with different options when patching the AP file. In older versions it does not give you any options, but in newer versions there is an option that you MUST TICK and that is "RECOVERY" you need to make sure this checked off when you patch the AP file.
I still am not clear how to install twrp, I know it has to do with patching and then multidisabler and also vbmeta but I can't seem to find a step by step guide.
Related
Hello,
I have this phone (infinix note 4 x572) running oreo 8.1 , build number :X572-H5312CE-O-180531V117
I wish to root it but after a while of searching i'm overly confused and frustrated..
can you please guide me through rooting it?
thanks alot
btw, does local update help in any way ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All the info and installation instructions you need can be found in the release thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
And if you encounter problems along the way, take a look at the troubleshooting guide.
https://www.didgeridoohan.com/magisk/Magisk
If you have further questions after that, make sure to be specific about what you need help with. "Guide me through it" is a bit too general and is already covered in the links above.
Didgeridoohan said:
All the info and installation instructions you need can be found in the release thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
And if you encounter problems along the way, take a look at the troubleshooting guide.
https://www.didgeridoohan.com/magisk/Magisk
If you have further questions after that, make sure to be specific about what you need help with. "Guide me through it" is a bit too general and is already covered in the links above.
Click to expand...
Click to collapse
thanks, the first prerequisite is the stock boot.img,, i tried backing it up using miracle box but encountered the 'unstable port' problem, what other possible ways i could extract the boot.img from my phone ?
and btw, i remember asking a guy somewhere and he told me that magisk won't root my device, is that true considering it's a less-known manufacturer ?
yazansayed said:
thanks, the first prerequisite is the stock boot.img,, i tried backing it up using miracle box but encountered the 'unstable port' problem, what other possible ways i could extract the boot.img from my phone ?
Click to expand...
Click to collapse
I'd try the TWRP route instead. I found this thread after about 2 minutes of searching on XDA (search words "infinix note 4 x572"):
https://forum.xda-developers.com/android/general/infinix-one-support-root-twrp-firmware-t3695803
It's a really good idea to use the XDA search, because it often works quite good.
If you want to keep the stock recovery on your device, you can actually just boot the TWRP image instead of flashing it. In that case, the command used in that thread:
Code:
fastboot flash recovery recovery.img
should be changed to:
Code:
fastboot boot recovery recovery.img
If that doesn't work, you can actually make quite easily make a backup of your boot image in TWRP and then patch that file in the Manager, to see if that works better.
If things don't work out in TWRP, make sure to provide the recovery log.
---------- Post added at 20:35 ---------- Previous post was at 20:32 ----------
yazansayed said:
and btw, i remember asking a guy somewhere and he told me that magisk won't root my device, is that true considering it's a less-known manufacturer ?
Click to expand...
Click to collapse
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...
Didgeridoohan said:
I'd try the TWRP route instead. I found this thread after about 2 minutes of searching on XDA (search words "infinix note 4 x572"):
https://forum.xda-developers.com/android/general/infinix-one-support-root-twrp-firmware-t3695803
It's a really good idea to use the XDA search, because it often works quite good.
If you want to keep the stock recovery on your device, you can actually just boot the TWRP image instead of flashing it. In that case, the command used in that thread:
Code:
fastboot flash recovery recovery.img
should be changed to:
Code:
fastboot boot recovery recovery.img
If that doesn't work, you can actually make quite easily make a backup of your boot image in TWRP and then patch that file in the Manager, to see if that works better.
If things don't work out in TWRP, make sure to provide the recovery log.
---------- Post added at 20:35 ---------- Previous post was at 20:32 ----------
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...
Click to expand...
Click to collapse
thanks alot for the quick responses, i will try it and reply as fast as possible
okay, i downloaded the twrp recovery image for Note 4, flashed it using Fastboot method successfully,
the problem is when i try to boot into the twrp recovery mode, i tried holding the power menu+ vol.down buttons, it sends me into a black screen with "factory mode" upwards in yellow, no button is working.
i then tried
Code:
adb reboot recovery
the phone reboots and says "No command" under a red triangle.
i then tried to flash the twrp img using sp flash tools, and flashed it successfully but the same errors occur, i can't seem to be able to boot into recovery mode.
i looked up for a solution for the "no command" problem, here's one:
I faced the same problem with nexus 6p. It works when you root immediately after flashing the TWRP. Keep the superSU file in the storage. Get into bootloader. Flash TWRP via fastboot. Without restarting anything, just press volume up/down buttons while in the bootloader to select recovery. TWRP will open. Flash the SuperSU.zip. Then restart the system. Next time, if you open recovery, you won't get the "no command". If you don't flash SuperSU and you try to open recovery later, you will get the "No command".
Click to expand...
Click to collapse
what i understood is that i shouldn't reboot my device using "fastboot reboot" , he says i should get into recovery mode directly without restarting, idk how to do that since there are no option for it on the screen, i just have
Code:
=> FASTBOOT mode...
on the screen !
Didgeridoohan said:
It's very possible... It depends on how stock the Manufacturer has kept Android on your device, what chipset the device has, and so on...
Click to expand...
Click to collapse
unfortunately i never used the sp flash tool before, so i tried flashing a stock rom but the device is now dead with "dram failed" error, i'll try fixing this first
It's tricky trying to help with a device you don't have...
Did you manage to boot to recovery? Usually you use the volume buttons to select the options and then the power button to confirm. You could also just use the fastboot boot option command I wrote earlier. It'll boot straight into TWRP.
There are a few threads for your device around, so if you need help specific to your device, that's the place to go...
everything is fine now,, fixed the device by flashing a rom named (X572-H5312CE-O-180203V55) then used magisk app to patch the included boot.img, flashed the patched boot.img using sp flash tool,, and everything is working fine now,,,
thanks alot
the twrp from the post you provided is for an older firmware, this is why i couldn't get into recovery after i flashed the provided twrp img,, there is no available twrp for the oreo version of the firmware, but i requested one from twrp builder project,, thanks alot, i've learnt alot in the last 24 hours
yazansayed said:
everything is fine now,, fixed the device by flashing a rom named (X572-H5312CE-O-180203V55) then used magisk app to patch the included boot.img, flashed the patched boot.img using sp flash tool,, and everything is working fine now,,,
thanks alot
Click to expand...
Click to collapse
could you upload the boot.img pls (the stock and the patched if possible )
Unofficial release -TWRP recovery for the Galaxy A7 2018 - SM-A750F EXYNOS 7885
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.3-0 Released
Aug 6, 2018
TWRP 3.2.3-0 is out now for most currently supported devices.
What's new in 3.2.3-0:
* Fix automatic installing of OTA zips on encrypted devices
* Remove SuperSU from TWRP
* Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Update 25/12/2018
Beta build released.
Current status - (Tested working)
Treble supported
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
*****INSTALL INSTRUCTIONS:*****
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
(Hold POWER + VOL DOWN + VOL UP)
2. Load the file below into the AP slot, uncheck AUTO-REBOOT and hit start.
twrp_3.2.3-1_a750_251218
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the RMM bypass zip
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.
5. Reboot to TWRP (Do not boot to the OS yet)
*****OREO ROOT INSTRUCTIONS:*****
NOTE: To mount data it is necessary to first *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
Continue with the instructions below to prevent the data partition becoming re-encrypted.
1. To root I suggest downloading and installing the latest Magisk as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Copy the Magisk zip to a Micro sd card then install with TWRP.
3. Enjoy your rooted device.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, @BlackMesa123 for RMM bypass zip.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
158 views, 20 downloads and not one reply.
Smashing guys. :good:
4. перепрограммируйте обходной zip- архив rmm.можно поподробнее?
Mod edit: English please!
Google translation:
4. reprogram the rmm bypass zip archive. can you be more specific?
Odin shows Failed !! Tried 3 Times ? Had to Flash the Firmare Again.
Help !!
notoriouschyld said:
Odin shows Failed !! Tried 3 Times Had to Flash the Firmare Again.
Help !!
Click to expand...
Click to collapse
Sorry about that, build error on my end. Fixed now.
It will not work on SM-A750FNXXU1ARIC?
Sfuj24 said:
It will not work on SM-A750FNXXU1ARIC?
Click to expand...
Click to collapse
Is that a statement or question?
Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?
powermen27 said:
Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?
Click to expand...
Click to collapse
No matter how complete an instruction is, if you don't bother reading it in the first place it's not going to make any difference.
As clearly posted in the OP:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Click to expand...
Click to collapse
sorry
ashyx said:
Sorry about that, build error on my end. Fixed now.
Click to expand...
Click to collapse
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!
notoriouschyld said:
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!
Click to expand...
Click to collapse
Can you tell me which firmware build number you are running and if possible a screen shot of your device screen while booted to download mode?
Stuck in bootloop after flashing twrp
A750FXXU1ARK7
A7whatever said:
Stuck in bootloop after flashing twrp
A750FXXU1ARK7
Click to expand...
Click to collapse
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
https://androidfilehost.com/?fid=11410963190603874542
ashyx said:
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
Click to expand...
Click to collapse
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number
A7whatever said:
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number
Click to expand...
Click to collapse
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?
ashyx said:
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?
Click to expand...
Click to collapse
Flashed the old sboot.bin however got the same bootloop
A7whatever said:
Flashed the old sboot.bin however got the same bootloop
Click to expand...
Click to collapse
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?
ashyx said:
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?
Click to expand...
Click to collapse
Yes
A7whatever said:
Yes
Click to expand...
Click to collapse
Hmm looks like I'll have to take another look at the twrp config or kernel build.
If I pack the kernel into a boot image would you be willing to test if it boots?
Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.
Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!
links not works
vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.
Thank you very much
Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one
Install global via fastboot, all is included or in qfil ROM is all in zip file
vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again
i tired and failed again
galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it
hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?
galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot
Hello All,
Quick and dirty guide.
Warning!
I'm not responsible for any damage to you, to your device or to your data. Do this at your OWN RISK! If you don't know what you are doing, STOP now!
Steps to flash the ROM using TWRP:
Be on Android 11 (MIUI 12.5) and flash TWRP. There is a guide here on how to do it, so i'm not posting that.
Obviously, you'll need unlocked bootloader so if it's not unlocked, your case is lost
Download the ROM in the title from here and copy it to your phone
Reboot to TWRP
If you want, i guess you can wipe data - i haven't done this
Flash the ROM like you would any other (install and select the zip you copied over from the above link)
At the end, it'll give you mounting error but it's all good, reboot
Wait for the ROM to settle if you wish - you can stop here
For Magisk, follow the below steps
Enable developer settings and USB debugging
Install the Magisk Manager app (latest version 24.1 at the time of writing this little guide)
Turn off the phone and boot it into fastboot mode
Start the fastboot app of your choice from your pc and connect your phone via USB (I'm using Minimal ADB and Fastboot, you can find it on XDA)
issue the following commands in the same order:
Code:
fastboot devices
if you don't get as a response a few digits of your device ID with the fastboot text next to it, you'll doing something wrong (driver might be or you are not in fastboot mode)
Code:
fastboot flash boot_a patched_boot.img
if the command completes you'll get a finished message
Code:
fastboot flash boot_b patched_boot.img
patched_boot.img is the full path of the patched boot.img file
Code:
fastboot reboot
wait for the device to boot.
Patched boot.img is attached but if you wish, you can extract it from the rom yourself using payload dumper and patch it on your phone with Magisk. The attached boot.img is patched with Magisk 24.1, this is what you'll need as well - this is the current version. You need to unzip the attached file of course!
Enjoy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just flashed by TWRP and reset to the factory. So far there is no fastboot image, only recovery one, and normal way it is not possible to flash it as it is only for Mi Pilot people.
Pichulec said:
Just flashed by TWRP and reset to the factory. So far there is no fastboot image, only recovery one, and normal way it is not possible to flash it as it is only for Mi Pilot people.
Click to expand...
Click to collapse
what do you mean with "no fastboot image"?
There are two types of images - recovery and fastboot.
Hello, im trying your guide but my phone stuck on fastboot mode and when im try to enter twrp, it stuck on frozen screen i cant swipe to unlock twrp....any idea?(
Yuditkiichi said:
Hello, im trying your guide but my phone stuck on fastboot mode and when im try to enter twrp, it stuck on frozen screen i cant swipe to unlock twrp....any idea?(
Click to expand...
Click to collapse
Hi, if TWRP worked before, it should as well now.
donjamal said:
Hi, if TWRP worked before, it should as well now.
Click to expand...
Click to collapse
Any idea how to solved my twrp problem? Or should i reflash it with pc?
Yuditkiichi said:
Any idea how to solved my twrp problem? Or should i reflash it with pc?
Click to expand...
Click to collapse
I would probably relfash twrp as long as I'm still on 12.5.
Yesterday received OTA update for my 11t pro. I'm not in Pilot Programm..
Yuditkiichi said:
Any idea how to solved my twrp problem? Or should i reflash it with pc?
Click to expand...
Click to collapse
for now twrp not working for a12.
wait for update
All can download rom here https://xiaomifirmwareupdater.com/miui/vili/stable beta/V13.0.1.0.SKDMIXM/
and use updater to update it.. that dont need any mi pilot.. i just installing it.. yeeah!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to thank TeamWin for their amazing work!
I saw that the newer Samsung MediaTek phones were not getting any sort of love, so I bought one myself to kick start the development.
TWRP is the obvious choice as it is reliable and trustworthy with frequent updates and patches.
INSTALLATION:
Odin Method (Windows):
Step 0: Unlock Device Bootloader by toggling the OEM Unlock option in Developer Options. Device will reboot to Odin mode and will prompt you to long press volume up, device will then unlock bootloader and perform a complete factory reset so make sure to backup any data.
Step 1: Download the unofficial TWRP image from the link attached below.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Select the downloaded recovery.tar in AP slot and vbmeta_disabled_R.tar in USERDATA slot, connect the device to PC, go to options and untick "Auto-Reboot"
Step 4: Click START and the Device will get flashed, Odin will say SUCESS!.
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
Heimdall Method (Linux):
Step 1: Install heimdall tool on linux , google it.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Open up terminal in the downloaded TWRP directory, extract twrp image from recovery.tar
Step 4: Enter the command "heimdall flash --RECOVERY recovery.img --no-reboot" where twrp.img is name of the downloaded image
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
COMPATIBILITY:
TWRP Recovery is compatible with latest Android 11 firmware
tested on:
M325FXXU3AUK1, M325FXXU4AVB1 as well
First time you boot into TWRP, don't forget to backup your EFS, Secondary EFS and NVRAM! Go into Backup and select "EFS,", "Secondary EFS" and "NVRAM" and backup to preferably MicroSDcard and copy it to your PC in case you need it if IMEI corrupts.
DON'T IGNORE THIS STEP!
All kernel source and device tree below!
Device Tree: TWRP Device Tree
Kernel Tree: TWRP Kernel Tree
DOWNLOADS:
VBMETA DISABLED FOR R: MEGA LINK
TWRP TAR: MEGA LINK
@Akhil99 please check your inbox, you have an important PM
Samsung Galaxy M32 | OFFICIAL
Official Discussion group for ➤
Samsung Galaxy M32
Official Channels & Groups ➤
• Updates : @SamsungGalaxyM32Updates
Samsung Galaxy M32 | OFFICIAL
Official Discussion group for ➤ Samsung Galaxy M32 / M32 Prime Official Channels ➤ • Updates : @SamsungGalaxyM32Updates
t.me
Thank you so much... I lost all my hope, I thought there was no developer in the Samsung community.
Lihas Demhai said:
Thank you so much... I lost all my hope, I thought there was no developer in the Samsung community.
Click to expand...
Click to collapse
No worries, I will try and do whatever possible for this device.
I wanna encrypt my device but it keeps stuck on android icon when I do so, I have installed magisk btw. please help
I messed up. I didn't backup EFS, Secondary EFS and NVRAM.
Now, I can't use the sim.
I don't know what to do now.
dekisugihidetoshi said:
I messed up. I didn't backup EFS, Secondary EFS and NVRAM.
Now, I can't use the sim.
I don't know what to do now.
Click to expand...
Click to collapse
if you find any way to recover it then let us know please
dekisugihidetoshi said:
I messed up. I didn't backup EFS, Secondary EFS and NVRAM.
Now, I can't use the sim.
I don't know what to do now.
Click to expand...
Click to collapse
[SOLVED] suddenly unknown imei
ok so, i was using my phone normally yesterday, but out of nowhere, my SIM card stopped working and i couldn't use mobile internet/calls anymore. So i checked my settings and i saw my IMEI was marked as unknown, the same with baseband. The A32...
forum.xda-developers.com
[fixed] rooted a325m suddenly no imei, no sim
I rooted my a325m by patching the stock AP file with magisk, had to use FRP hijacker by hagard to be able to flash the patched file. I root uninstalled several apps for debloating. The phone worked fine for like a couple of weeks, and now...
forum.xda-developers.com
well i found these fixed, try them and let us know
Tharki-God said:
[fixed] rooted a325m suddenly no imei, no sim
I rooted my a325m by patching the stock AP file with magisk, had to use FRP hijacker by hagard to be able to flash the patched file. I root uninstalled several apps for debloating. The phone worked fine for like a couple of weeks, and now...
forum.xda-developers.com
Click to expand...
Click to collapse
this one worked for me
any way to root m32 without messing up imei?
im on android 12 latest security update. does this twrp work with my phone? this is my first time rooting so i dont have much knowledge about rooting
Kevin_6769T said:
im on android 12 latest security update. does this twrp work with my phone? this is my first time rooting so i dont have much knowledge about rooting
Click to expand...
Click to collapse
No, this is for only android 11
When will this project be compatible to latest kernel?
Thank you for your work Akhil99! It's very much appreciated.
I had no trouble installing it, following your guide. Gonna wait installing the Android 12 update till a new TWRP version is available for it.
I'm flashed this recovery on my M32 with Android 12... And after this I can't enter anything but download mode. Stuck in boot loop.
I can lock and unlock the bootloader, but it doesn't help.
I'm soooo stupid, but how can I make my phone work again?
EDIT:
I managed to recover my device. I've downloaded the firmware from samfrew.com and flashed it through Odin3.
i can't install GSIs with this TWRP ;-; help someone?
ijin menyimak..
dari Mlebu