Related
I have 3 stereo bluetooth devices and 2 headset only devices.
The problem comes from auto re-connecting to the stereo devices.
The only way it seems to work at all is if I pair all the stereo devices first.
If I reset, then I usually have to click and hold on the device in BT Settings and select "set as wireless stereo" to get the stereo connection to kick in.
In my tests I have made sure only one device is on at a time.
It certainly is not as easy as it should be.
It seems to be worse after a Tilt reset.
So my questions are : Has anyone else seen this behavior and is there a fix or work-around for it?
If not, does anyone no how to make a direct link to the BT Settings Window so at least it would only be a couple clicks to fix it?
You need at least one of each device (headset and stereo headset) to see this problem.
I've seen this with my Wizard as well as the Tytn II, so I suspect it's a "feature" of the MS BT stack. I think it's somehow related to the "set as wireless stereo" feature -- apparently only one device at a time can have that setting, and MS turns the setting off if it can't connect to that device. Note that there's no such setting for handsfree, and connections on that profile work flawlessly between multiple devices.
Its a little better
What I found out is that if you pair all your stereo devices first and then all the non-stereo, things seem to work a bit better and Dutty's BT-Link plugin will reconnect the stereo part most of the time, so its only a click away and sometimes you don't need to turn the device to discover mode.
However, if anyone from MS reads this, there is no reason not to automatically connect into full stereo, IF the device is the only one in the list that can be found at any point in time. And if they wanted to be really cool, if not, then present the user with a list so he can click to choose.
Similar problem
Hi BSW11,
Im having a similar problem with the pairing of my carkit.
http://forum.xda-developers.com/showthread.php?p=1717330#post1717330
I believe it can be traced to the the MS BT stack not handling the automatic re-pairing correctly. I am surprised that not many other people have notice or complained in this forum about it.
Adam
No BT Wireless Stereo device will auto-connect to any WM device, you have to tell your phone to connect to it via the BT setting unless a 3rd party app has that function built in to it. This is a 'feature' of MS WM OS system.
Any BT 'headset' (ie mono earpiece) will auto connect if it has been selected for 'use as headset'
Hope this helps.
Hi there,
maybe anyone got an idea. When trying to Connect my Touch Pro to Bluetooth Radio, it works for the frist time. Next time i get in my Car it tries again and again to establish a connection but it doesn´t work.
Maybe someone can help me.
Dolphus
Just look at the thread started by mstaxin. That will explain a lot.
I also have big problems with the bluetooth connection in combination with my carkit (just for the record I also drive a Passat but that hasn't got anything to do with it). First I had a Parrot CK 3100 and worked great with my TyTn. The Bury CC 9060 should work better with the Pro, and it really works a little better. But after every call the connection is gone. So far it seems there is nog good device to connect to with bluetooth in any car.......
Now waiting for a promissed firmware update by Bury. Wish you luck.....
I think I fixed it!
I was having a problem not unlike yours, where I pair it the first time, and all is well, and the next time it doesn't do anything. I fiddled with my car's bluetooth (BMW ULF), and a headset and they would connect, after fiddling, but just not on startup. I finally determined that it appeared that the phone was not setting up a keepalive with the paired object. I found two reg keys in the bluetooth stack that were relevant. I changed them, and it now works exactly as you would expect every time!
Keys:
HKLM/Software/Microsoft/Bluetooth/Audiogateway
ConnectHFOnCall=0
The default is 1, which instructs to only connect on a call
PowerSave=0
The default is also 1, but this makes bluetooth be "awake" all the time
Change the settings, soft boot and you shoudl be good to go!
Hope that helps
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Similar problem
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
damian101 said:
Got a similar problem with my apt-x receiver.
Every few minutes the connection drops for a very short time.
The airpods don't support apt-x, but maybe it's the same problem.
My receiver shows a connection via apt-x, , but you can't find any apt-x support in the Nokia 8 specs.
But I had no problems with a friends portable speaker (non-apt-x).
I went back to cables
Click to expand...
Click to collapse
I’m wondering if the Nokia 8 just has rubbish connectivity, generally. If the Bluetooth chip is part of the WiFi chip then this would figure as it has the worst WiFi connectivity I’ve seen in recent years
Are you running Nougat or Oreo? From what I've heard, a lot of the bluetooth issues have been fixed in Oreo.
leoni1980 said:
Just to open with this - I really like this phone and have been enjoying using it. Aside from the fairly poor WiFi range and the flaky NFC it is otherwise a really nice phone. There's just one other issue I have which is extremely frustrating:
I can't use it with my Airpods. Or at least, I can connect it but at some point the sound will crackle and cut off. If I wait it will occasionally crackle and come back on again but will cut in and out in a way that would drive anyone mad. I've tried fiddling with Bluetooth settings in developer options but it doesn't seem to make any difference. I've even tried a factory reset.
The Airpods work absolutely perfectly with every other device - no issues with the iPhone (expectedly) nor the S8, G6 or even my laptop. I can't 100% rule out a fault with the Airpods but given these facts it seems highly unlikely.
I wondered if anyone else used Airpods and had experienced issues and found a solution.
Not too interested if you've had no issues with your device, nor what you think of Airpods - I just want to see if I can get to the bottom of this, or the Nokia will have to go back.
Many thanks
Click to expand...
Click to collapse
I wonder if yours is wonky, my Wi-Fi is excellent and i get get 75Mbit down 19Mbit up over 5Ghz through 2 brick walls, a floor up and at the opposite end of the house, i have not missed any payments using contactless via NFC and Bluetooth works fine via an Anker Bluetooth speaker and my JBL Bluetooth headphones.
Sorry for digging an old thread, but I still have the same problem even after a bunch of software updates.
My issue with the AirPods is that they do not work after they connect. I take them out of the case, they connect (as expected), but as soon as I start playing something the music/video pauses and the sound switches to speaker (if I press play again it plays out loud). To make them work I need to go to bluetooth settings, disconnect them and connect them again. Then they will work almost flawlessy (minor intrerruption from time to time).
I have no issue with other BT speakers. I also use the AirPods with an iPad and laptop and no issues there.
My Nokia 8 software is up to date. AirPods firmware the same (checked on the iPad).
I tried re-pairing after each software update. I tried changin BT settings (absolute volume - dev settings; contact sharing and HD Audio: AAC) but no improvements.
Any ideas what else can I try?
Search for Oreo and Bluetooth problems. It seams to be a general issue for this Android Version. I have problems connecting my Phone with the car, too.
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
So you have bluetooth connected to the watch and car at the same time?
If so, my guess would be a setting in the watch for the volume of music. Or in the phone, go to settings / bluetooth / advanced / dual audio. Select it and play with the settings to setup what to do when two bluetooth audio devices are connected
ninjatiger26 said:
Hi everyone
Little bit lost on this and not sure if it's just me but hoping someone can help or point me somewhere. I have a s10+ UK edition. And a Samsung galaxy watch.
When I connect the phone to the car the audio is low quality and hisses a lot. When I put the watch into plane mode. Cutting it off from the phone. All is normal.
Have never seen this happen before. Any ideas?
Thanks
Click to expand...
Click to collapse
Had the same problem with my cheap external bluetooth to FM adapter.
Turn on Developer Options and adjust the bluetooth profile while connected to your car audio.
Having Dolby Audio set to auto might also have an impact.
Thanks for the advice but no luck so far.
The settings under developers let me change when nothing is connected but they revert back to sbc soon as I leave the menu. And they are locked out when connected.
Also dual audio does nothing.
It only has the issue when the watch is connected.
As if its taking the bandwidth.
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Titokhan said:
@ninjatiger26
@theanykey asked you to change the AVRCP version.
You can only change the audio codec from the default one (SBC) to something like aptX if your receiver supports it. And yes, you can not change the codec on the fly while playing.
Click to expand...
Click to collapse
Apologies for the delay, has been a mad few days!
Sadly changing the AVRCP didnt help on all versions.
It seems there maybe a weird one however on the codec. It reverts to SBC which from a bit of muddled googling is all my receiver supports. from non iPhone devices. However, it takes AAC if its a iphone.
Seems odd to me however they would limit it. Like i said this is from googling so maybe incorrect.
the stranger part is however i paired up a Oneplus 6 and the watch all was fine on SBC codec. its just watch and the s10+ it has an issue.
Admit very lost on this one.
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Camerena said:
I'm having the exact same issue. I've got an S10 Plus and a Galaxy Watch Active (both in the brazilian versions), and there is a noticeable crackling and loss of quality when I play music on my car stereo while the phone is connected both to the car and the watch. If I put the watch in airplane mode, the issue is gone.
Also, it only seems to happen with my car. I've tried to replicate the issue with my Sony WH-1000XM3 headphones and an Anker bluetooth speaker, but with those devices there is no noticeable loss of audio quality.
I've tried resetting bluetooth setting, messing with the codecs in developer options and pairing both devices again multiple times.
Anyone got any ideas?
Click to expand...
Click to collapse
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Outbreak444 said:
See if the problem persists when you only share your Bluetooth audio to your vehicle and not calls, contacts, or messages.
Click to expand...
Click to collapse
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Camerena said:
Just tried it and still got the same issue... I've pretty much given up by now.. hoping for a future update to solve this..
Click to expand...
Click to collapse
Why not Google it?maybe you will get a solution for this problem.
Same issue here on my s10+. When playing any audio in my car via BT i hear the distortion/hissing noise especially when the song has a higher treble frequency.
I have just about tried all fixes i could find on Google, and no luck.
When connecting to my ear buds (Jabra Elite 65t) it disappears and checked in developer mode that it supports to AAC for BT Codecs.
But when connecting to the car it reverts to SBC.
The issue clearly lies on Samsungs side, as my brother has a Huawei p30 Pro, also has bluetooth 5 and plays amazingly well in all aspects (Bass-Mids-Treble).
I know I'm posting this almost a year later, but i am desperately looking for a fix.
SN. I have recently updated my phone to Android 10, despite all the complaints to Samsung from many users... Sadly this issue has not beeing fixed on my side.
Does any of you still have the same issue?
I have the same issue with S9(android 10 ui2)
- no dou audio diable option
- bluetooth conected only to my earphones, with no car.
I’ve been a Samsung phone user since the S5 and this issue persists across all their phones since at least that one. The only real solution is to avoid the SBC codec or turn off your watch while listening to music. It will never be patched as it’s been going on for over 6 years. In the early days Galaxy phones only really used SBC so you couldn’t avoid it.
APT-X and AAC are your best options. Good luck finding those on a car system. You can easily find headphones that support them.
Hi everyone, I have a problem with Bluetooth audio, whenever I use wireless earphones and put the phone in my pocket (sometimes it happens with the phone lying on the table), the audio starts chopping every 3-5 seconds and it's very annoying. Right now I'm using the Xiaomi Mi Air Dots Pro but this has also happened with the Mindkoo MK-BE01.
I've already googled this issue but I had no luck except for this post explaining something similar but on the Mi A2 Lite. https://forum.xda-developers.com/mi-a2-lite/help/bluetooth-audio-issues-pie-t3886132
I've also found posts for other phones (Pixel and S8/S9 mainly) with the same issue and I have tried the fixes I found there (clearing Bluetooth data and cache, removing Bluetooth from battery optimizations, pairing the earphones again) but none of them work.
I'm on Pie with the February security update. I can't tell if this problem was present in Oreo because I didn't use wireless earphones back when I was using Oreo.
Is anyone having the same issue? Does anyone know how to fix it or what is causing it?
Try disabling bluetooth scanning under location settings
jsiklosi said:
Try disabling bluetooth scanning under location settings
Click to expand...
Click to collapse
Already tried that, didn't work
Metoo! Bluetooth seems to go off when screen goes on. Most annoying.