Database Develop

Flashed to Valkyrie and for sudden volume button not working...

Guys plz help me. I have flashed my X1i to Valkyrie last days and for sudden the volume button is not working, not even for entering bootloader for changing rom.
Have anyone experienced this? Is there any solution? The button was working and after flash not anymore, this way i think it is not broken, and just a compatibility issue with my hardware, but i cant say why this happening.
Any help wellcome.
Regards, Eduardo.

emflorence said:
Guys plz help me. I have flashed my X1i to Valkyrie last days and for sudden the volume button is not working, not even for entering bootloader for changing rom.
Have anyone experienced this? Is there any solution? The button was working and after flash not anymore, this way i think it is not broken, and just a compatibility issue with my hardware, but i cant say why this happening.
Any help wellcome.
Regards, Eduardo.
Click to expand...
Click to collapse
OMG, why are new threads opened for every *** these days?
ask in the ROMs thread, who else should know in the first place?
and I can shortcut for me: I never had that on any ROM, especially not on agents works
did u hard reset?

emflorence said:
Guys plz help me. I have flashed my X1i to Valkyrie last days and for sudden the volume button is not working, not even for entering bootloader for changing rom.
Have anyone experienced this? Is there any solution? The button was working and after flash not anymore, this way i think it is not broken, and just a compatibility issue with my hardware, but i cant say why this happening.
Any help wellcome.
Regards, Eduardo.
Click to expand...
Click to collapse
You use Agent rom and you never search at his thread??? Are you......????

Ok guys, sry, i though was a problem with my phone, not a ROM issue. I just have not seen anything about that on bugs issue on his post.
I will search that, sry for the inconvenience, and ty much for pointing out the solution.

oo sorry
did i forget to mention that i secretly put a virus to kill ur hardwares......keep it for a lil more than a day now and ur device wont even boot
PS: @ all : there is no need to worry for u guys, the virus is only effective when it detects OP's IMSI number

Hey, u dont need to make a joke on me, right? The thing is that the HARDWARE button is not working. For volume, for bootloading, etc... and i cant find a solution on your post, and i dont think its a ROM problem, never told that, ok Agent?
The problem is that Valkyrie post has more than 1k posts... should i read it all?
Ty again for pointing the solution.

You could try another rom... and if it still doesn't work... think it's really HW problem... need to be fixed or replaced.

Thats the problem, how to flash another ROM if i cant enter bootloader?

then this is not your world kid, find a way ...

Yeah, i notice everyone that use this site is an expert hacker that know how to do ROMs and stuffs... here i have no room.
Ty for helping.
No more talking required, just did corrected my problem, YES, i found a sollution that is not written here, and since every1 here knows much more than me, there is no need to share.
Best regards.

emflorence said:
Thats the problem, how to flash another ROM if i cant enter bootloader?
Click to expand...
Click to collapse
Use the RUU tool and flash via usb. It will go into tri color bootloader automaticly

emflorence said:
Yeah, i notice everyone that use this site is an expert hacker that know how to do ROMs and stuffs... here i have no room.
Ty for helping.
No more talking required, just did corrected my problem, YES, i found a sollution that is not written here, and since every1 here knows much more than me, there is no need to share.
Best regards.
Click to expand...
Click to collapse
I have been using this forum for a while now and most of the experts are quite rude when you do something slightly wrong - so don't worry about it. This is still a great resource so keep posting...

emflorence said:
Guys plz help me. I have flashed my X1i to Valkyrie last days and for sudden the volume button is not working, not even for entering bootloader for changing rom.
Have anyone experienced this? Is there any solution? The button was working and after flash not anymore, this way i think it is not broken, and just a compatibility issue with my hardware, but i cant say why this happening.
Any help wellcome.
Regards, Eduardo.
Click to expand...
Click to collapse
same here i cant use my volume button??????? it happened out of know where i have flashed a lot of rom's but i never dropped my phone or damaged it so i just work whit it but if some one know why im having that issue pleas help thx

Interesting, seems to be happening to a few people... may be related to this thread, too: http://forum.xda-developers.com/showthread.php?t=618760
Maybe something related to some of the latest WM6.5 builds? Anyway, glad you found a solution. killer8nl posted a good way to get another ROM loaded (RUU tool and USB) to see if that fixes it for those who still have the problem.

killer8nl said:
Use the RUU tool and flash via usb. It will go into tri color bootloader automaticly
Click to expand...
Click to collapse
And if your on Windows 7 x64 like me, and you don't want to get in unsigned driver mode all the time, just copy the file attached to your SD card and run it on your phone, it will restart in bootloader
I always use this since my volume down key isn't working like it should either, i think it is just sort of broken, due to pushing it way to many times, to flash every day

ok, can I remind people of the forum rules
1. Search before posting
2. Be polite and respect your fellow xda-dev user.
If you feel someone has created a thread for no reason, report it, do not respond with a lack of respect. We want to encourage people to use XDA, not be rude to them and scare them off!! If people continue in this manner it will be them banned, not the person who opened the thread!! Consider this first and last warning!!
Also, before anyone opens a new thread, use the 'search' function and see if any related or similar threads exist. Most questions have already been asked
If people continue to flaunt the forum rules I will have no other option but to ban them!

Aerox912 said:
And if your on Windows 7 x64 like me, and you don't want to get in unsigned driver mode all the time, just copy the file attached to your SD card and run it on your phone, it will restart in bootloader
I always use this since my volume down key isn't working like it should either, i think it is just sort of broken, due to pushing it way to many times, to flash every day
Click to expand...
Click to collapse
You don't have to go in unsigned driver mode for this. I'm also running windows 7 64 bit ultimate and no problem for flashing via ruu for me

emflorence said:
Guys plz help me. I have flashed my X1i to Valkyrie last days and for sudden the volume button is not working, not even for entering bootloader for changing rom.
Have anyone experienced this? Is there any solution? The button was working and after flash not anymore, this way i think it is not broken, and just a compatibility issue with my hardware, but i cant say why this happening.
Any help wellcome.
Regards, Eduardo.
Click to expand...
Click to collapse
This thread is very misleading. Why don't you PM the author or ask at his thread. You flash his rom and you open a new thread...?
Cheers.

[Q] having problems with installing honeycomb on my DS7

Hello Everybody!
So, the thing is that I bought a brand new DS7 from ebay recently, and it has Honeycomb in it, but about a week ago things went wrong -actually I'm not sure if it was good before. The tablet does not work on the proper way. First of all, I tried to install iGO on it, but it didn't let me to do it. So I can't install apps. And there are times when I can't connect it to the computer...and etc. I was wondering if it has a proper Honeycomb in it...so the point is that I decided to delete everything from it and reinstall the Honeycomb myself. I'm not very into these things, so it's a big effort for me to do this.
I have been searching for tutorials for 2 days. I think I found the right one somewhere here on this website. I've closed it unfortunately and it was opened yesterday and I cleared yesterday's history for some other reasons...so I can't open it again.
So the last time everything was ready, so was I, to do the installing. But, the comp. was searching for some APX files, probably drivers, but it didn't find it. So I couldn't continue the installation.
I've been looking for these drivers for hours, but haven't found anything. So I decided to register to this site, ask you, experts where to seek and what to do.
I lost so much time on this that I shouldn't have...
Thanks for your help in advance!
(Sorry for my English if it isn't understandable everywhere, I'm a non-native-speaker. Cheers! )

Now I'm about to restore the whole device following this (http://forum.xda-developers.com/showthread.php?t=1011654) tutorial. Hope it'll solve some of the problems.

raidon24 said:
Now I'm about to restore the whole device following this (http://forum.xda-developers.com/showthread.php?t=1011654) tutorial. Hope it'll solve some of the problems.
Click to expand...
Click to collapse
Dude, try not to dobblepost. Its quite better when you edit the first one.
(By the way im not a native english speaker to but i hope you understand what i mean)
Could you write down how far you come. At which step do you stop? And if the drivers are a problem, please post your Computer OS, like Windows or Linux or Mac.

I have solved the problem. Should I delete this thread somehow?

raidon24 said:
I have solved the problem. Should I delete this thread somehow?
Click to expand...
Click to collapse
No, you should post your solution in this thread. If someone has the same problem they may do a search and find this thread, and they can learn from you. Or if the solution was in another thread, post a link to that thread.

hah, okay The reason I didn't want to is because I think it's not a big deal. I have pushed the volume + and the Turn Off button then Factory Reset, and waited. Now everything's fine. The problem was, actually that I'd been doing...rather trying the reseting in a wrong way. I thought I should do it in the Settings/Privacy menu. But no. So It solved my problems. I didn't need to re-install Honeycomb as I'd thought the time I started this thread. I believed that the problem is in my HC, but fortunately no, so I'm going to sleep. Minden jót, srácok!

bionic ... new chalange

Ok guys ... this is the problem ...:crying:
I have (had) a Droid Bionic running ics leak 232 in Brazil (GSM/UMTS ... thanks to xda developers - "bionic in t mobile" thread).
While messing around with the phone connected to linux (baaad idea) at some point I deleted the bootloader ("happy finger" + lack of knowledge os linux).
Now, my phone doesnt power up and RSD Lite doesnt recognize it when connected but, when I connect it to the PC, a green light lits at the top right corner of the phone and Windows recognize it, at the device manager, as a OMAP4430 USB under TI Board tab. This leads me to think that some kind of life still exists down there or, the hardware is alive and waiting for the right software.
After a long quest for a solution, I found this: "forum.gsmhosting.com/vbb/f634/unbrick-dead-samsung-gt-i9250-galaxy-nexus-gt-i9100g-via-usb-cable-freeeeeeeeeeee-1465412/index9.html".
Now I think this is the way out of this mess (is the same hardware, OMAP platform from Texas Instrument), if exists any, but this was made for Samsung, by Samsung technicians, and doesnt apply to Motorola. :crying: again.
So, is there anyone who can help me, or have any idea of what can be done (other than trow it away or use it as a paper weight)?
Any help would be most appreciated.
Regards

I saw you haven't had any replies yet. My roommate had a similar problem, he managed to mount his system partition automatically and thought his SD card was partitioned into 10 or more partitions.
So he reformated the mount and had a dead phone right after, said he only got a small white light on his notification light when plugged in.
I didn't get a chance to check it out before he took it to Verizon for a refurb, so sadly I'm not much help. Just thought I'd input anything I knew since you still had an empty thread. Hope it comes back alive!
Sent from my kitchen toaster.

Have you tried using the command line version of moto-fastboot? It might work, but might not work... I think you need to boot into fastboot mode, but I could be wrong... Either way it's worth a try.
Also, does anything happen when you try to hold down the vol+ and VOL- buttons when powering on the phone?
Sent from my XT894 running ICS

its dead
danifunker said:
Have you tried using the command line version of moto-fastboot? It might work, but might not work... I think you need to boot into fastboot mode, but I could be wrong... Either way it's worth a try.
Also, does anything happen when you try to hold down the vol+ and VOL- buttons when powering on the phone?
Sent from my XT894 running ICS
Click to expand...
Click to collapse
Thank you for your answer danifunker;
The phone is dead. Pressing buttons does nothing. The only thing that happens is to lit the notification green light at the top right corner of the screen WHEN a plug it in my PC and windows keep telling me this is a unknown device. I unsuccessfully used OMAPFlash, but installing the usb drives that came with it, when I plug it to the PC, windows device manager shows me a new device "OMAP4430 USB" under a new tab "TI Board" , whitch is not recognized by RDS lite or adb or fastboot. Is only recognized by OMAPFlash. If you dont know about OMAPFlash, I found it here http://forum.xda-developers.com/showthread.php?t=1701471 , but this procedure is for a Samsung, witch uses the same platform (OMAP4430), but I dont have the right configurations for the Droid Bionic.

Just the same
chrisp6825 said:
I saw you haven't had any replies yet. My roommate had a similar problem, he managed to mount his system partition automatically and thought his SD card was partitioned into 10 or more partitions.
So he reformated the mount and had a dead phone right after, said he only got a small white light on his notification light when plugged in.
I didn't get a chance to check it out before he took it to Verizon for a refurb, so sadly I'm not much help. Just thought I'd input anything I knew since you still had an empty thread. Hope it comes back alive!
Sent from my kitchen toaster.
Click to expand...
Click to collapse
Thank you for your interest.
If you have any further notice about your roommate problem, please let me know.
And, if you manage to post a reply from your kitche toaster, I am sure you will be able to help in this problem. looking forward for that. :laugh:

pjcw said:
Thank you for your interest.
If you have any further notice about your roommate problem, please let me know.
And, if you manage to post a reply from your kitche toaster, I am sure you will be able to help in this problem. looking forward for that. :laugh:
Click to expand...
Click to collapse
Can you explain exactly how you deleted the bootloader off of the Bionic? Knowing EXACTLY (what you ran, what you typed) what you did will help us help you.
As an aside, I had no idea there was a SGSII-OMAP variant, but I am not big on the Samsung phones, just assumed they've only been using their own SoCs for a while now...

Hi podspi.
Sorry for the delay.
As a matter of fact, wasnt me that bricked the phone. A friend o mine tryed to flash a gelly beam version, and did it via Fastboot,, under Linux (of witch I know almost notingh).
He told me that the problem was that he made:
fastboot erase mbm
and then
fastboot reboot bootloader
and so the bootloader was lost. He missed a step.
Any help will be greatly aprecieted.
Regards

IOW, since the mbm has been erased, and the mbmflashable hasn't been flashed, there is no way to get it into the bootmenu sceen anymore, right?
Hmmm. Let me ask some other folks too.
Sent from my ASUS Transformer Infinity Running Tapatalk.

I wonder if a factory cable would work to get it to flash mode? Why would you even mess with the bootloader trying to install ICS? You do that through recovery, not fastboot.

I was on ICS ... This was an attempt to get it to JellyBeen ... I, also, dont know why. I was perfectly happy with ICS working in GSM/WCDMA. This is why I am so sad ... It was a very stupid thing to do ... As a matter of fact, I will get a factory cable, but I dont think this is gonna help. Anyways, I am keeping it by side to remember me not to mess with things that are working fine. I'm kind of losing hope that it can fixed.
Regards

pjcw said:
I was on ICS ... This was an attempt to get it to JellyBeen ... I, also, dont know why. I was perfectly happy with ICS working in GSM/WCDMA. This is why I am so sad ... It was a very stupid thing to do ... As a matter of fact, I will get a factory cable, but I dont think this is gonna help. Anyways, I am keeping it by side to remember me not to mess with things that are working fine. I'm kind of losing hope that it can fixed.
Regards
Click to expand...
Click to collapse
I think we need to figure out how you flash mbm back onto there. Actually, I think it's mbmloader that you need on there...
mbm = Motorola Boot Manager (?) maybe.
After reading this page: http://omappedia.org/wiki/Bootloader_Project
I believe, mbm = uboot, mbmloader = x-loader
Just found this page... http://www.droid-developers.org/wiki/How_to_load_mbmloader_from_SD_card
download the SBF and grab the mbmloader for ICS. See if you can get a little further...

SamuriHL sHouse of Bionic restored mine when all I could get was fastboot.
Sent from my DROID BIONIC using xda premium

It won't help this. It needs to be flashed at the omap level and since moto isn't about to release the configuration files for the Bionic you can consider this one permanently bricked.
Sent from my Xoom using Tapatalk 2

I tend to agree with SamuriHL. I was thinking that the configuration souldn't be so diferent than others (like Samsung) that uses the same platform (omap). I know that it's naive, but what else could I do. Also, I need the signed files for x-loader and u-boot, of witch I think danifunker is right, this means mbm and mbmloader, that I have, but they came in bin format and not image format (.img). I will try to convert them to .img, but I am at the end of my resources (not that they are so many), and will give up shortly. At this point (giving up), I will buy another cellphone AND IT WONT BE A MOTOROLA, Probably a HTC or a Samsung. But I will keep Bionic at my desktop, as a paperweight, to remind me how I liked it, how I mess things up.
Anyways, if I manage to solve this problem, I will post here, and I wish to thank everyone that spare their time to try to help people. If anyone have any suggestion, I'll be glad to follow.

If you modify them in any way they'll no longer be signed and won't work. Someone else already went through several weeks of trying to fix their phone that had similar issues. He's well connected and still couldn't get the necessary files. Don't necessarily give up on Moto, though...it's not their fault we're stuck with locked bootloaders. Blame VZW for that one. Even Samsung was forced to lock the S3 on VZW. Things may change some day. We'll have to wait and see.

You can always get RAZR i with the unlockable bootloader! that might make things a bit easier...

IT'S DONE!!!!!!!!!
IT'S DONE ....... IT IS ALIVE AGAIN :highfive:
Guys. My phone is alive again. Thanks to FRAGULINA and PICGRABBER for their unvaluable help. It is now running GSM with data enabled (3G) with ICS 232, rooted, thanks to FRAGULINA and HTCFlyerX ( http://forum.xda-developers.com/showthread.php?p=31101192&highlight=build+prop#post31101192).
Well, I'm attaching 2 zip files. One is omapflash and the other is "THE FILES", and instructions on the "release_notes.txt". This works on LINUX.
And works like a charm. Took me (much) less than 5 minutes to get me from a dead phone to bootloader fastboot. And the rest is history. Well known procedures.
Thanks to all of you that helped or tryed to help.
Enjoy.
To those who have an interest in new challanges (as I know you are), i'm opening a new quest and would appreciate your thoughts.
I have at hand an atrix 2 and I want to find where in hell is the subsidy code writen at and how can I read it. This new quest will be at the proper location at the atrix 2 forum.
I think we won this challange. Lets go for another.
Any doubts I am available to help.
Regards.

Holy.....uh, well, WOW! I'm in awe here on this one. WELL DONE!!!!!!!

SamuriHL said:
Holy.....uh, well, WOW! I'm in awe here on this one. WELL DONE!!!!!!!
Click to expand...
Click to collapse
Can we use this method to flash any firmware to the phone? Lets say you load the latest ICS, maybe we use this method which restores the most original bootloader to the phone and then flash to any version?
Which version did you fastboot to?

pjcw said:
IT'S DONE ....... IT IS ALIVE AGAIN :highfive:
Guys. My phone is alive again. Thanks to FRAGULINA and PICGRABBER for their unvaluable help. It is now running GSM with data enabled (3G) with ICS 232, rooted, thanks to FRAGULINA and HTCFlyerX ( http://forum.xda-developers.com/showthread.php?p=31101192&highlight=build+prop#post31101192).
Well, I'm attaching 2 zip files. One is omapflash and the other is "THE FILES", and instructions on the "release_notes.txt". This works on LINUX.
And works like a charm. Took me (much) less than 5 minutes to get me from a dead phone to bootloader fastboot. And the rest is history. Well known procedures.
Thanks to all of you that helped or tryed to help.
Enjoy.
To those who have an interest in new challanges (as I know you are), i'm opening a new quest and would appreciate your thoughts.
I have at hand an atrix 2 and I want to find where in hell is the subsidy code writen at and how can I read it. This new quest will be at the proper location at the atrix 2 forum.
I think we won this challange. Lets go for another.
Any doubts I am available to help.
Regards.
Click to expand...
Click to collapse
This is unbelievable. After talking with you on Gtalk, I thought this was a permanent brick. Thanks for the files...I have a guy on gtalk right now who can benefit from these.

[Q] PLS HELP : Can't Turn on my Device

After unlocking my phone using HTCDEV,
I've tried to root it using "HTC_QuickRoot_1.1.13_Release",
and it claimed something like the flash img not compatible
with it and then my phone shut down (!)
now I can't turn it on for a couple of hours (theres no LED btw).
Please Help! (Iv'e searched in the threads for some problems declaimed like mine and found nothing like)
Thanks in advanced guys!

nyg85 said:
After unlocking my phone using HTCDEV,
I've tried to root it using "HTC_QuickRoot_1.1.13_Release",
and it claimed something like the flash img not compatible
with it and then my phone shut down (!)
now I can't turn it on for a couple of hours (theres no LED btw).
Please Help! (Iv'e searched in the threads for some problems declaimed like mine and found nothing like)
Thanks in advanced guys!
Click to expand...
Click to collapse
Well, one word : Service :laugh:

this is the only way huh?

nyg85 said:
this is the only way huh?
Click to expand...
Click to collapse
I guess.......and next time when you wanna root etc. just have the patience and read everything that is written here.
Never the less some phones are more durable in that matter ( i don't know why ). Some phones are like butter, 1st attempt and you are rooted. And with another you sweat like a pig and even then you can't do it right :laugh:

well
Well,
I hope it'll get better
thanx

Before bringing your phone to service you could try:
- a factory reset. Maybe the unsuccessfull rooting attempt has messed up something you can fix this way.
- flashing a RUU and see if the issue remains. This usually sorts out...

[Q] Removed touch wiz woops!

Morning all,
I apologise if this is in the wrong section but I am new to the forum and in a bit of pickle.
Around a week ago I rooted my lovely new note 3 to hopefully one day install some nice new ROM to get rid of the horrid touch wiz and actually see the full potential of the phones power. However, for some silly reason while I was using titanium backup on my phone I thought it would be a good idea to uninstall touch wiz thinking it would magically go back to basic android however it didn't. It is completely broken now, woops. The first issue I had was it would boot up and stick to the Samsung logo and just glow so I thought it would be an idea to install stock ROM via ODIN to try and revert it back to normal. Once I downloaded the correct stock ROM it was uploading through download mode however at the last minute it failed with a ext4 error which I think it means it's bricked? Not sure, completely new to this. I am now a bit stuck as I am not 100% sure what to do next.
The phone will only boot into either the firmware upgrade has encountered an issue, basically Odin mode or download mode. I have tried recovering it through kies however it cant connect to it. It knows it is there as it will start searching for it when it's connected however says it can't find it.
My phone is a note 3 SN SN-9005. The system status is custom, reactivation lock is off, Knox kernel lock 0x0, Knox warranty void 0x1 and write protection is enabled.
Obviously I would like to get the phone back to normal, I don't care if it has to be completely wiped and brought back to normal I would like it to just work. I've been an complete idiot and fiddled with something I'm not 100% sure on and I would like to not have a 600 quid paper weight hehe.
I will greatly appreciate any help or feedback.

You won't get the best feedback for a 9005 model here. We are the 900A version stuck on AT&T. Yes, however, we have plenty of intelligent people here. It's best to post your question here in the main Samsung Galaxy Note 3 thread next time:
http://forum.xda-developers.com/galaxy-note-3/help
Next, since you've voided your warranty as Knox being 0x1 - you're pretty much screwed for a refund or replacement based on PRESENT development from what I have read all over the AT&T threads. Understand this. Now, that being said, did you install a custom recovery or have your original recovery?
Here's my input/help. Forget about ODIN. You don't need that if all you did was remove your touch wiz.
Take out your battery, put it back in and hold VOLUME UP, POWER, and HOME together until you reach a recovery. Then if it's the stock recovery, wipe your cache partition, then wipe data/factory reset. Then reboot and you're good back to starting over. Check with a rooting application to see if you still have or not. If not, then obviously reroot
Also, don't ever do anything like that again without thinking what it could do, lol . Always tread carefully whenever you are new to something. Just my two cents for you. If you came here to root and learn it, don't be afraid to ask questions about applications and expanding your knowledge. No one will ignore you if you ask a simple question in the right manner/thread.
Good luck!

Thank you for the feedback. I have defiantly learnt from my mistake with this one. I have usually been lucky diving into things blindly hehe. I have tried to put it into recovery mode however it just vibrates like it should and then comes back up to firmware upgrade issue with the two computer screens an a attention sign in the middle. Is there anyway to get recovery mode back.

apdnote said:
Thank you for the feedback. I have defiantly learnt from my mistake with this one. I have usually been lucky diving into things blindly hehe. I have tried to put it into recovery mode however it just vibrates like it should and then comes back up to firmware upgrade issue with the two computer screens an a attention sign in the middle. Is there anyway to get recovery mode back.
Click to expand...
Click to collapse
Wish you had come here when you deleted touchwiz only instead of playing with Odin. Looks like you messed it up even further and have to now use Odin to reinstall your firmware. I'm about to go to sleep, but do this.
1) Take out battery and put it back in. Then press and hold VOLUME DOWN + HOME + POWER at the same time until you reach DOWNLOAD MODE.
2) Follow the steps here and use your odin or latest odin (shouldn't matter):
http://www.androidrootz.com/2013/10/how-to-unrootunbrick-galaxy-note-3.html
Oh, and google is your friend. It's how I learned things over the years...READING, then tinkering....you're welcome .

I wish I did as well. I will try this when I get back from uni this evening and post back results.
Thank you again.

apdnote said:
I wish I did as well. I will try this when I get back from uni this evening and post back results.
Thank you again.
Click to expand...
Click to collapse
You're very welcome, bro.

opasha said:
You're very welcome, bro.
Click to expand...
Click to collapse
I used what you have said to do and downloaded the correct firmware however when I try and install it via odin in download mode I get a FAIL(SIZE!) message at the end. Its not an ext4 error anymore but im worried at what is going on now. I have tried searching it up on google however nothing has come up. Looks like ive completely broken it... ='(

apdnote said:
I used what you have said to do and downloaded the correct firmware however when I try and install it via odin in download mode I get a FAIL(SIZE!) message at the end. Its not an ext4 error anymore but im worried at what is going on now. I have tried searching it up on google however nothing has come up. Looks like ive completely broken it... ='(
Click to expand...
Click to collapse
You have the 9005 right? I think you have the wrong file to odin. What is the exact model number of your phone and where are you located in the world? (reason I ask is there are different regions to choose from)

agent929 said:
You have the 9005 right? I think you have the wrong file to odin. What is the exact model number of your phone and where are you located in the world? (reason I ask is there are different regions to choose from)
Click to expand...
Click to collapse
SSN: SM-N9005GSMH
S/N: RF1D96B6ELB
United Kingdom Vodafone.
Im sure I downloaded the 9005 for samsung in the uk but I wil try again from a different site that specficly says what country and code.
If not would you be able to post me a link to the exact one?
Many thanks

Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone

Good to hear!

apdnote said:
Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone
Click to expand...
Click to collapse
Your welcome, don't forget to hit the thanks button for anyone that helped you!

apdnote said:
Thank you so much everyone for your input. I hunted out the correct EU snapdragon firmware and booted it on, emptied the cache and restored to factory settings and its finally running! Only took 2 days hehe but at least its working. Thanks again everyone
Click to expand...
Click to collapse
Hi, I am using same SSN. Can you please confirm the working rom download URL? Appreciate your help.
Thank you.