Database Develop

A stock rom without touchwiz for SM-G531F

I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1

Thanks bro
---------- Post added at 04:40 PM ---------- Previous post was at 04:28 PM ----------
Link dont work
---------- Post added at 05:25 PM ---------- Previous post was at 04:40 PM ----------
https://www.dropbox.com/s/ar1g1un5czgfhhb/2017-04-02--12-58-37_LMY48B.G531FDDU1APJ2.zip?dl=0 THIS LINK WORK THAT IS IN MASTER THREAD

TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
Thank u very much bro i was searching for a custom rom from years.

I moved unziped file to twrp but when i opened twrp and seleted restore option nothing is showing.

TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
i need this rom in sm-g530h

xufy3n said:
i need this rom in sm-g530h
Click to expand...
Click to collapse
Oops!! I don't have the device

:good:

Moved unziped file to twrp but when i opened twrp and seleted restore option nothing is showing.

How to unlock FRP lock someone please reply

richie325 said:
How to unlock FRP lock someone please reply
Click to expand...
Click to collapse
Remove your Google and Samsung account

Its giving me error on the installation proces eeror installing zip file ? help?
---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------
erminatoryt said:
its giving me error on the installation proces eeror installing zip file ? Help?
Click to expand...
Click to collapse
ps: Meta inf file not foud update binary or something help

After isntalling the backup my setting dont work etc any help =?

ErmiNatorYT said:
Its giving me error on the installation proces eeror installing zip file ? help?
---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ----------
ps: Meta inf file not foud update binary or something help
Click to expand...
Click to collapse
Looks at the OP
It says Restore from the steps
That means its a backup from TWRP, not a flashable zip

No problem flash G531FXXU1APG2?

Confirmed Working...!!!! Galaxy Grand Prime SM-531F
Just loaded your backup rom. It worked flawlessly. Searching for bugs but none until now.
Copy extracted folder "2017-04-02--12-58-37_LMY48B.G531FDDU1APJ2" to "TWRP/Backups/" and restore from TWRP
Thanks a million...!!!

I will give a video tutorial

in this rom why clock is not present?????
TechnoR1 said:
Oops!! I don't have the device
Click to expand...
Click to collapse
TechnoR1 I have installed your custom stock ROM but this rom why can't contain clock plz reply

Video tutorial tomorrow coming

ganeshbakare said:
TechnoR1 I have installed your custom stock ROM but this rom why can't contain clock plz reply
Click to expand...
Click to collapse
download it from playstore

TechnoR1 said:
I have debloated the stock ROM and replaced the touch wiz apps with custom ones.
Working perfectly fine on SM-G531F
Rooted
Xposed installed
With better RAM management
Works faster than bloated Touchwiz stock
Have a try
Download Link
Custom Stock For SM-G531F
It is a TWRP backup. So, install TWRP before trying this ROM.
TWRP download here
Odin download here
Skip to step 4 if you have installed TWRP
1) Download TWRP
2) Flash it with Odin
3) Reboot
4) Download the file from the above link
5) Unzip it
6) copy the folder to TWRP location
7) Reboot in TWRP recovery mode
8) Restore
9) Reboot to system and Enjoy
10) Hit Thanks!!
Sincerely,
TechnoR1
Click to expand...
Click to collapse
I restored this folder from TWRP and when i am rebooting system it's stuck at Samsung Grand Prime Powered by Android. Any fix?

[help required] magisk update gone wrong

Hi Guys,
I've been using sokkoban's B596 ROM for a while now and it had Magisk 12 installed already.
Today I got a notification from magisk to update to new version, I downloaded it from app and it installed and prompted for reboot.
After reboot the phone got stuck on Boot Logo for a couple of seconds and then my phone started. I opened magisk to see what's new but what I saw was the old version of Magisk was also uninstalled and now its saying me to download and install magisk 13. When I touch the download button a zip file just got downloaded and nothing else happened.
Can someone please assist me on how to install it again ??
Any help would be greatly appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

hbilalshah said:
Hi Guys,
I've been using sokkoban's B596 ROM for a while now and it had Magisk 12 installed already.
Today I got a notification from magisk to update to new version, I downloaded it from app and it installed and prompted for reboot.
After reboot the phone got stuck on Boot Logo for a couple of seconds and then my phone started. I opened magisk to see what's new but what I saw was the old version of Magisk was also uninstalled and now its saying me to download and install magisk 13. When I touch the download button a zip file just got downloaded and nothing else happened.
Can someone please assist me on how to install it again ??
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Magisk 13.1 or 13? 13.1 isn't working on stock roms, only 13.

D1stRU3T0R said:
Magisk 13.1 or 13? 13.1 isn't working on stock roms, only 13.
Click to expand...
Click to collapse
13.1 is showing up

hbilalshah said:
13.1 is showing up
Click to expand...
Click to collapse
I know, but it's not working

hbilalshah said:
13.1 is showing up
Click to expand...
Click to collapse
Let me be clear. The new stable version of Magisk (v13.1) doesn't work on the stock ROM. For me it does boot, just takes a long time, but there's no Magisk Manager and if installed it lets you know Magisk is not installed. Get one of the betas that work (the last one does for me) or v12

Just installed last beta (c4377ed) and all works fine. SN passes and Play Store says my device is certified

Sonofapo said:
Just installed last beta (c4377ed) and all works fine. SN passes and Play Store says my device is certified
Click to expand...
Click to collapse
Link please..??
And a little bit guide on how to install as I have never installed it before

hbilalshah said:
Link please..??
And a little bit guide on how to install as I have never installed it before
Click to expand...
Click to collapse
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589 download last zip file (c4377ed)
Installation is pretty simple restore boot image from recovery to do a clean install and flash this zip file from TWRP. Then download Magisk manager apk (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and install it.

Sonofapo said:
https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589 download last zip file (c4377ed)
Installation is pretty simple restore boot image from recovery to do a clean install and flash this zip file from TWRP. Then download Magisk manager apk (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) and install it.
Click to expand...
Click to collapse
Restore boot image..??
How to do that

hbilalshah said:
Restore boot image..??
How to do that
Click to expand...
Click to collapse
if you have never installed any other root method (for example Chainfire's SuperSu zip) you can avoid this step. Otherwise it is safer to restore a stock boot image via TWRP backup or extracting a new one from your rom file (UPDATE.APP or whatever) and flashing it via Fastboot. Make sure to install the correct boot image according to you current rom installed on your device

Sonofapo said:
if you have never installed any other root method (for example Chainfire's SuperSu zip) you can avoid this step. Otherwise it is safer to restore a stock boot image via TWRP backup or extracting a new one from your rom file (UPDATE.APP or whatever) and flashing it via Fastboot. Make sure to install the correct boot image according to you current rom installed on your device
Click to expand...
Click to collapse
I want to add you can flash images in TWRP

JpegXguy said:
I want to add you can flash images in TWRP
Click to expand...
Click to collapse
I don't think web have the dame rom version... Mine is b598 Sokkoban's rom

Go to this link and download the required firmware
After that extract the boot.img from update.app file and flash it... that should do

amageek said:
Go to this link and download the required firmware
After that extract the boot.img from update.app file and flash it... that should do
Click to expand...
Click to collapse
I always recommend this site
---------- Post added at 01:05 PM ---------- Previous post was at 01:01 PM ----------
Sonofapo said:
I don't think web have the dame rom version... Mine is b598 Sokkoban's rom
Click to expand...
Click to collapse
Sokkobans ROM is stock with some more apps and settings changed. You can use the boot image from stock.
You can always get the FULL (and OTA, but we want full to extract) from here: http://hwmt.ru/oth/HWFF/info/view.php?find_model=ale-l21

UPDATE: Magisk v13.2 has been released, it works fine for me

Yes I can confirm it too, magisk 13.2 is all good.

D1stRU3T0R said:
Magisk 13.1 or 13? 13.1 isn't working on stock roms, only 13.
Click to expand...
Click to collapse
Thats why do never update this crap?

Magisk 13.1 doesn't work, but 13.2 and 13.3 works very good

RootingPro-18 said:
Thats why do never update this crap?
Click to expand...
Click to collapse
But 13.2 and 13.3 works

RootingPro-18 said:
Thats why do never update this crap?
Click to expand...
Click to collapse
If you want SafetyNet to pass you should update. Also changes are coming to modules... Anyhow 13.3 passes fine on B602 I presume. Not on B604 because it's not August 1st yet

TWRP 3.2.1 Recovery [AROMA] for Samsung A5 2016 [A510xx] with Odin 3.13.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.1 Recovery [AROMA] For Samsung A5 2016 [A510xx]
ODIN 3.13.1
TWRP Recovery for Samsung A5 2016 All Variants. --> A510F/A510FD/A510M/A510Y [Exynos7580] ​
DOWNLOAD ​
[ https://mega.nz/#F!wmYGmJia!hyO2SawqIAB_4l4y08wXkQ ]
​
Strictly for Samsung A5 2016 [A510xx]
:angel: Please Flash on your own RISK. :angel:
WARRANTY wil be VOID.
Flash using Odin, AP mode.
PREREQUISITE?? ​
Samsung A510xx Drivershttp://www.samsung.com/in/support/smartswitch/
Latest Version of ODIN 3.13.1
Latest Version of TWRP Recovery
HOW?? ​
Download and install the drivers for your A5
Go Settings - Developer Options - OEM unlocking
Enable OEM UNLOCK
:fingers-crossed: Now, Open Odin 3.13.1 :fingers-crossed:
Select the recovery.tar.md5 file in AP section
Reboot phone to Odin mode ( Power / Volume - / Home button )
Go to option in Odin and Uncheck Autoreboot
Flash it
Enter mode Recovery ( Power / Volume + / Home button )
Enjoy
What's new in ver 3.2.1?? ​
Added OTG support
minor UI fixes
Better android-8.0 compatibility in ROM trees
Fix missing library in android-8.0
Fix inconsistent SDCard naming
Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot
Better comtability for android-8.1.0
Fix conflicts
INFORMATION :
Recovery Kernel : 3.2.x
Status : Stable
:silly: Whoosh.....Warrant Void. Dont Blame Me. I Warned You. :silly:
27/02/2018 14:34 IST : I've updated the link with Odin 3.13.1 and Latest TWRP. You can check now.
27/02/2018 17:28 IST : Updated feature list. Source : Link
28/02/2018 00:36 IST : Updated the new link for Odin 3.13.1
Please Hit Thanks if you this found useful. It costs nothing.
Click to expand...
Click to collapse
SCREENSHOTS ​

Great recovery !!!
Please post screenshot of this recovery feature thanks
Thanks for developing for A510F
Keep it up !!!

Sophia.xda said:
Great recovery !!!
Please post screenshot of this recovery feature thanks
Thanks for developing for A510F
Keep it up !!!
Click to expand...
Click to collapse
I've already attached the screenshots.

bunnyy95 said:
I've already attached the screenshots.
Click to expand...
Click to collapse
OK thanks for developing...!

Hi, this recovery will be flashed through Flashify ???? a5xelte.img .tar because odin supports only .md5 version?
Please update the link of recovery in md5 version for odin. Thanks
---------- Post added at 08:08 AM ---------- Previous post was at 07:33 AM ----------
Added OTG support is working (great) 1 problem for me can you update your recovery due to when I reboot the cell and goto recovery again all setting of my recovery is lost like Screen time out setting, vibration, twrp prompt all comes again and reset will you add a save button in the last of recovery so that it will save the previous setting? ( That wil not be changed to currently setting please ) UPDATE !!! @bunnyy95 @By Zonik @ashyx

Sophia.xda said:
Hi, this recovery will be flashed through Flashify ???? a5xelte.img .tar because odin supports only .md5 version?
Please update the link of recovery in md5 version for odin. Thanks
---------- Post added at 08:08 AM ---------- Previous post was at 07:33 AM ----------
Added OTG support is working (great) 1 problem for me can you update your recovery due to when I reboot the cell and goto recovery again all setting of my recovery is lost like Screen time out setting, vibration, twrp prompt all comes again and reset will you add a save button in the last of recovery so that it will save the previous setting? ( That wil not be changed to currently setting please ) UPDATE !!! @[email protected] [email protected]
Click to expand...
Click to collapse
ODIN supports files with the .tar extension. The .md5 extension is just the added hash.
For TWRP to save settings ensure your /DATA partition is mountable.
If not you will need to FORMAT it and flash my dm-verity/encryption patch.

ashyx said:
ODIN supports files with the .tar extension. The .md5 extension is just the added hash.
For TWRP to save settings ensure your /DATA partition is mountable.
If not you will need to FORMAT it and flash my dm-verity/encryption patch.
Click to expand...
Click to collapse
yes!! i need a fix it's not working whenever go reboot recovery TWRP setting all lost please give me patch or guide for samsung a510f thanks? @ashyx

Sophia.xda said:
yes!! i need a fix it's not working whenever go reboot recovery TWRP setting all lost please give me patch or guide for samsung a510f thanks? @ashyx
Click to expand...
Click to collapse
Have you FORMATTED the DATA partition like I advised?
You need to apply the patch at the same time.
See any one of my TWRP threads for info.

Sophia.xda said:
Hi, this recovery will be flashed through Flashify ???? a5xelte.img .tar because odin supports only .md5 version?
Please update the link of recovery in md5 version for odin. Thanks
---------- Post added at 08:08 AM ---------- Previous post was at 07:33 AM ----------
Added OTG support is working (great) 1 problem for me can you update your recovery due to when I reboot the cell and goto recovery again all setting of my recovery is lost like Screen time out setting, vibration, twrp prompt all comes again and reset will you add a save button in the last of recovery so that it will save the previous setting? ( That wil not be changed to currently setting please ) UPDATE !!! @bunnyy95 @By Zonik @ashyx
Click to expand...
Click to collapse
It is very strange your problem, in the same way there are many versions of twrp compiled for A5 2016, you can try them and verify if they all have this same problem that you have now ..
ashyx said:
Have you FORMATTED the DATA partition like I advised?
You need to apply the patch at the same time.
See any one of my TWRP threads for info.
Click to expand...
Click to collapse
Hello Mr. I believe that in the a5 2016 it is not necessary to flash a patch, I have seen that for other devices for example (A5 2017) it is necessary to flash a patch and format DATA partition or internal memory.
In the case of "A5 2016" it is running without a patch, with the compiled img running smoothly ..

260 / 5000
Hi All,
My phone is a5 2016. The phone does not turn on, I switched the help keys to download mode and loaded stock rom, it was 100% successful, but the phone does not turn on. Boatloader is staying too. I couldn't break the FAP LOCK. I've also tried twrp but unfortunately odin can't install because I can't root it either.
Wat can i do?
Best regard

Good

[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J6+/J610F/FN/G/DS

Unofficial release -TWRP recovery for the Galaxy J6 plus 2018 - SM-J610 MSM8917
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1-0 Released
May 22, 2019
TWRP 3.3.1-0 is out now for most currently supported devices.
What's new in 3.3.1-0:
* Fix selinux issues during formatting - dianlujitao
* Various fixes for toybox and toolbox builds - CaptainThrowback and bigbiff
* Flash both A and B partitions when installing a recovery ramdisk - Dees_Troy
* Add option to uninstall TWRP app from /system - Dees_Troy
* Create digest for subpartitions - bigbiff
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
Update 28/7/19
3.3.1-1 build released.
Current status - Beta (tested working)
Treble supported
Bugs: slight delay before touch starts working.
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
*****INSTALL INSTRUCTIONS:*****
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
(Plug in the USB cable and then hold POWER + VOL DOWN + VOL UP)
2. Load the respective file below into the AP slot, uncheck Auto-reboot and hit start.
twrp_3.2.3-1_J610_21230
twrp_3.3.1-1_J610x_28719
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the V3 RMM bypass zip
https://forum.xda-developers.com/showpost.php?p=79745844&postcount=627
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT AND BECOMING RMM LOCKED FOR 7 DAYS.
I ALSO SUGGEST BACKING UP ANYTHING YOU NEED ON INTERNAL STORAGE. AT SOME POINT YOU MAY EXPERIENCE A 'VERIFICATION FAILED MESSAGE' .
THIS IS NORMAL, BUT WILL REQUIRE THE DATA PARTITION TO BE FORMATTED IN TWRP.
5. Reboot to TWRP (Do not boot to the OS yet)
***** ROOT INSTRUCTIONS:*****
1. Flash the Forced encryption disabler patch. This is only required if you wish to have full functionality in TWRP.
Flashing this will disable Samsung's forced encryption. Disabling encryption will allow TWRP to mount the data partition.
After flashing the patch it is necessary to *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
J6+_oreo_forced_encryption_disabler
2. To root I suggest installing the latest Magisk beta as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
OREO ONLY: (Below is a DEFEX patched kernel for Oreo. Some root apps may not work correctly without this kernel):
https://androidfilehost.com/?fid=1395089523397922702
PIE ONLY: Due to some new securities in Samsung's latest Pie kernels, root will not work with the stock kernel. The patched kernel below is required to gain root on Pie.
(NOTE: flashing a custom kernel on PIe breaks the lockscreen. Ensure NO lockscreen is enabled before installing the kernel.)
J610FXXU1BSDF_patched_boot_28719
3. Enjoy your rooted device.
DEVICE TREE: https://github.com/ashyx/TWRP_Samsung_j6primelte
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, @dope77 for initial testing, @corsicanu for RMM bypass zip.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

the encryption disabler is causing continuous restarts at samsung j6+ logo

dope77 said:
the encryption disabler is causing continuous restarts at samsung j6+ logo
Click to expand...
Click to collapse
It only patches the fstab in the vendor partition.
If it's boot looping it means that dm-verity is not disabled.
Did you flash Magisk first?

my bad,i flashed 17.1 which was useless and not working
reflashed 17.3 and the encryption disabler and phone booted.
twrp is fully functioning and phone is decrypted,
thank you

Will you kindly attach the proper magisk 17.3 zip file?

Rooks said:
Will you kindly attach the proper magisk 17.3 zip file?
Click to expand...
Click to collapse
follow these instructions precisely:
1. do full backup and turn on oem unlock on in developer settings
2. place the twrp in AP in odin and uncheck auto reboot in options
3. connect your phone in download mode and flash the twrp
4. reboot directly to recovery after flashing twrp by pressing power and volume down for 8 seconds while in download mode then press power and volume up when the screen goes black to boot recovery
5. after recovery boots,go to wipe and then format data and type yes,go back to twrp main menu then select reboot and reboot recvoery,after twrp boot again (phone is now decrypted),go to install and install the j6+ encryption disabler,then install magisk zip
6. go back to twrp menu and format data again then reboot
IMPORTANT NOTE:
after your phone boot,go to magisk and try to install any module ,if it fails ,go to twrp again and reflash the magisk.zip

Rooks said:
Will you kindly attach the proper magisk 17.3 zip file?
Click to expand...
Click to collapse
I have linked to it in the OP, isn't that enough?

dope77 said:
follow these instructions precisely:
1. do full backup and turn on oem unlock on in developer settings
2. place the twrp in AP in odin and uncheck auto reboot in options
3. connect your phone in download mode and flash the twrp
4. reboot directly to recovery after flashing twrp by pressing power and volume down for 8 seconds while in download mode then press power and volume up when the screen goes black to boot recovery
5. after recovery boots,go to wipe and then format data and type yes,go back to twrp main menu then select reboot and reboot recvoery,after twrp boot again (phone is now decrypted),go to install and install the j6+ encryption disabler,then install magisk zip
6. go back to twrp menu and format data again then reboot
IMPORTANT NOTE:
after your phone boot,go to magisk and try to install any module ,if it fails ,go to twrp again and reflash the magisk.zip
Click to expand...
Click to collapse
Do i need to perform a format to 'data' partition?
Would i loose all my phone apps and everything?
What about RMM Bypass?

Still touch does not work for me.
And device does not boot to os, instead boots into twrp recovery. Also power key does not work when device turns off the screen in twrp recovery. Volume keys keep the screen alive, but touch does not work.
Let me do a full odin flash.
---------- Post added at 02:40 AM ---------- Previous post was at 01:52 AM ----------
Sorry to announce but touch did not work for me even after a clean install.
---------- Post added at 02:49 AM ---------- Previous post was at 02:40 AM ----------
This file here worked for me.

Rooks said:
Still touch does not work for me.
And device does not boot to os, instead boots into twrp recovery. Also power key does not work when device turns off the screen in twrp recovery. Volume keys keep the screen alive, but touch does not work.
Let me do a full odin flash.
---------- Post added at 02:40 AM ---------- Previous post was at 01:52 AM ----------
Sorry to announce but touch did not work for me even after a clean install.
---------- Post added at 02:49 AM ---------- Previous post was at 02:40 AM ----------
This file here worked for me.
Click to expand...
Click to collapse
You do realise that is exactly the same build as the one in the OP?
Don't you mean this one?
https://androidfilehost.com/?fid=11410963190603864590

ashyx said:
You do realise that is exactly the same build as the one in the OP?
Don't you mean this one?
https://androidfilehost.com/?fid=11410963190603864590
Click to expand...
Click to collapse
The one in OP did not work for me. One i mentioned was uploaded in other thread (post # 25) on 3rd of december and it worked. Enen size is different 16.7mb and 16.9mb reletively.

Rooks said:
The one in OP did not work for me. One i mentioned was uploaded in other thread (post # 25) on 3rd of december and it worked. Enen size is different 16.7mb and 16.9mb reletively.
Click to expand...
Click to collapse
Post #25?
The only one that works is the one I've posted in my previous post which must be the same one you have used.
It seems the build in the OP was the previous not working build which I'd linked by mistake.
Now fixed.
Apologies to anyone that downloaded it, fixed version is now up.

ashyx said:
Post #25?
The only one that works is the one I've posted in my previous post which must be the same one you have used.
It seems the build in the OP was the previous not working build which I'd linked by mistake.
Now fixed.
Apologies to anyone that downloaded it, fixed version is now up.
Click to expand...
Click to collapse
One that worked for me is from other thread, labled "Twrp /Exposed" like this. You know, you and dope77 worked on.
Post # 25: Check that thread and you might find that.

Rooks said:
One that worked for me is from other thread, labled "Twrp /Exposed" like this. You know, you and dope77 worked on.
Post # 25: Check that thread and you might find that.
Click to expand...
Click to collapse
Whatever is in that thread is now in this thread.
So you must have flashed the same twrp that is posted in the OP.

It's strange to notify that my J6+ does not connect to PC after flashing latest Magisk-v18.0(18000).zip file.

ashyx said:
Whatever is in that thread is now in this thread.
So you must have flashed the same twrp that is posted in the OP.
Click to expand...
Click to collapse
iv succesfully booted my device and install some modules from magisk but i cant get through root explorer . its says my device cant run the feature . is this normal sir?

jeyph said:
iv succesfully booted my device and install some modules from magisk but i cant get through root explorer . its says my device cant run the feature . is this normal sir?
Click to expand...
Click to collapse
Go to magisk settings and disable magisk hide, go to root explorer and grant root permission.

dope77 said:
Go to magisk settings and disable magisk hide, go to root explorer and grant root permission.
Click to expand...
Click to collapse
tnx for ur response sir . it really helps . one last thing sir dope. my titanium backup keeps fc and at first it says that my device is not rooted . can u help? sorry for my noob questions . its my first time using magisk. tia

jeyph said:
tnx for ur response sir . it really helps . one last thing sir dope. my titanium backup keeps fc and at first it says that my device is not rooted . can u help? sorry for my noob questions . its my first time using magisk. tia
Click to expand...
Click to collapse
It's either not compatible with magisk or not compatible with your device rom. I also tried titanium backup on my j6+, it didn't work

It's working on my J610G
Thanks
Now im waiting For custom roms ♡

Custom GSI firmware [Global/EU]

UPDATE 10/16/19
I don't know why the development on XDA for redmi 7a is unbelievable lazy, but this is what I stole from 4pda!
1.Unlock the bootloader if you have not already done so.
2. Download vbmeta.img file (4 KB),
Download patched_boot_10.2.5EU.img,
https://filehorst.de/d/cFqIgsev,
2a For patched boot 10.2.6. Global Download
https://filehorst.de/d/cBeCunfm
2b. For patched boot 10.2.5. Global Download
https://filehorst.de/d/cDpHyAId
3. Download recovery
Code:
[URL="https://filehorst.de/d/cHyobAcd"]TWRP 3.3.1-1003 LRTeam[/URL]
[URL="https://filehorst.de/d/crqywBxx"]TWRP 3.3.1-1003-DX mod[/URL]
[URL="https://filehorst.de/d/cbvACbwB"]TWRP 3.3.1-1[/URL]
4. Drop the vbmeta file into the adb folder. Next, rename the patched boot file to boot.img and paste it with recovery into the adb folder
Code:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
For patched boot but generally for the launch of custom firmware on our phone, say thanks YaAlex3
5. Reboot the phone by holding "volume + and power" the phone will reboot into TWRP
6. Flash Magisk
7. Download the GSI firmware. NEED A64 A / B . no other will do.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
GSI Firmware (A64 A/B):
AOSP 9.0 v119 (special instruction: search for boot fix and flash certification)
Descendant 4.0.1
DotOS
EvolutionX
PE Plus
MSM Extended
/e/
PixelExperience
ViperOS 6.5
LineageOS
And download and upload the Attached file Permissiver_v4.zip file (1.1 MB)
8. Unpack the downloaded firmware, you should get a file with the extension .img We
upload it to the USB flash drive. This can be done without leaving the recovery by simply connecting the phone via cable.
9. Make the Data format, wipe System, Davlik / Cache
8a. Install attached no-verity-encrypt-ysl to stay encrypted (optional)
10. Select Install img below - select the firmware file - select System
9a. If you like Gapps, Install BiTGApps Pie 9.0.0 (optional)
https://forum.xda-developers.com/android/software/arm-bitgapps-variants-t3959373
11. Flash Permissiver_v4.zip
12. Go back, select reboot - to the bootloader
13. In the adb folder, launch the console by holding the Shift button on the keyboard and right-clicking in an empty area, select the
line to open the command window.
We enter the fastboot flash vbmeta and then fastboot reboot
Code:
fastboot flash vbmeta vbmeta.img
fastboot reboot
Everyone is now waiting for the phone to turn on (at first it will reboot it's normal)
Note: vbmeta can also be flashed before the start of the whole action, as you wish.
Note 2: If suddenly there is no memory card, you can wipe System, flash everything and format the latest date.
Important Notes (FAQ)
[ROOT]Video recording fix:
put
media.camera.ts.monotonic=0
to /vendor/build.prop
[ROOT] Fix brightness
Turn on USB debugging, run the terminal \ cmd on the PC, write
Code:
adb shell
su
setprop persist.sys.qcom-brightness $ (cat / sys / class / leds / lcd-backlight / max_brightness)
Rejoice.
How to certify a device for GSI
Important: If you are at the initial setup stage, you must complete it. If notifications about the need for certification interfere, disable them.
We need to find our GSF Device-ID
1. Download the application
2. Copy “Google Service Framework (GSF) there.”
3. Go here , paste and click the button.
Or Just flash this zip and you are good to go
https://drive.google.com/file/d/1DTGpGrcjweZbN9wUdSSq8uQTmgxf0aD2/view

I am not good at this stuff so I probably shouldn't do it but I wanted to install Magisk on my phone
I flashed the patched boot using this
fastboot flash boot boot.img
I installed TWRP as my recovery
I flashed Magisk 19.3 from TWRP and rebooted the phone
It started android as usual, the magisk manager said Magisk was installed
After a few seconds phone restarted and booted itself into recovery (TWRP)
I went back to android and uinstalled the magisk by clicking uinstall in magisk manager
But the phone still restarts itself and boots into recovery every time I go to android
And the wifi isn't working
Do you have any ideas how to fix it?
And sorry for my English it's not my first language
Edit:
I used MiFlash to install original boot.img and everything seems to work fine

What does the permissiver do? Is that neccessary?

wow amazing

Has anybody else with an unlocked bootloader tried this? does it work?
Also: OP the recovery.img link is dead. Please reupload if you can.

Only gsi rom Aosp 9 pie system arm 32 -binder 64 by phhusson
Working and working without any problem with open gapps magisk . thanks xontax for flash
instructions.

mais 14 said:
Only gsi rom Aosp 9 pie system arm 32 -binder 64 by phhusson
Working and working without any problem with open gapps magisk . thanks xontax for flash
instructions.
Click to expand...
Click to collapse
Only 32 bit roms?

mais 14 said:
Only gsi rom Aosp 9 pie system arm 32 -binder 64 by phhusson
Working and working without any problem with open gapps magisk . thanks xontax for flash
instructions.
Click to expand...
Click to collapse
Can you reupload the recovery.img file for me. The link in the OP is dead

MDV106 said:
Can you reupload the recovery.img file for me. The link in the OP is dead
Click to expand...
Click to collapse
The link is ok download now and working.
If you have proplem again tell me I reupload.
---------- Post added at 08:33 AM ---------- Previous post was at 07:57 AM ----------
Luelu said:
Only 32 bit roms?
Click to expand...
Click to collapse
I flash many gsi rom arm 64a/b- arm a. Only.
Boot with success 2 gsi rom all the others no boot
1) pixel experience plus a64/ab but I have problems
2 Aosp 9 pie system arm 32 -binder 64 by phhusson
Stable and fast and I find a good gcam for arm32
That for me you can try flash any gsi rom .
Sorry for my English.

Please provide Gcam Link
mais 14 said:
The link is ok download now and working.
If you have proplem again tell me I reupload.
---------- Post added at 08:33 AM ---------- Previous post was at 07:57 AM ----------
I flash many gsi rom arm 64a/b- arm a. Only.
Boot with success 2 gsi rom all the others no boot
1) pixel experience plus a64/ab but I have problems
2 Aosp 9 pie system arm 32 -binder 64 by phhusson
Stable and fast and I find a good gcam for arm32
That for me you can try flash any gsi rom .
Sorry for my English.
Click to expand...
Click to collapse
provide Gcam link please

mdna1198 said:
provide Gcam link please
Click to expand...
Click to collapse
I don't remember link I repload .
Need you have camera API 2 enapled check with
camera 2api prope from play store delete any old gcam .
https://drive.google.com/file/d/1YGIRNbkmDPzzl1zX9phN_mCobzFxn59I/view?usp=sharing

mais 14 said:
The link is ok download now and working.
If you have proplem again tell me I reupload.
---------- Post added at 08:33 AM ---------- Previous post was at 07:57 AM ----------
I flash many gsi rom arm 64a/b- arm a. Only.
Boot with success 2 gsi rom all the others no boot
1) pixel experience plus a64/ab but I have problems
2 Aosp 9 pie system arm 32 -binder 64 by phhusson
Stable and fast and I find a good gcam for arm32
That for me you can try flash any gsi rom .
Sorry for my English.
Click to expand...
Click to collapse
Thanks, the link is working now.
---------- Post added at 12:24 PM ---------- Previous post was at 11:58 AM ----------
BTW, does anybody else have an issue with push notification LED light? Mine only lights up when the phone is charging even though I have turned it on for most apps

I think I managed to install and boot,
but my 7a cannot enable wifi
and google play is not certified
I used system-arm32_binder64-ab-gapps-su.img.xz (9.0 v119)
Anyone?

mais 14 said:
2 Aosp 9 pie system arm 32 -binder 64 by phhusson
Stable and fast and I find a good gcam for arm32
That for me you can try flash any gsi rom .
Sorry for my English.
Click to expand...
Click to collapse
How did you make everything stable? My wifi is not working.

RalphMalph said:
I think I managed to install and boot,
but my 7a cannot enable wifi
and google play is not certified
I used system-arm32_binder64-ab-gapps-su.img.xz (9.0 v119)
Anyone?
Click to expand...
Click to collapse
I don't have any problem with WiFi
For certified use the option for user's costum ROM
Need register with GSF I'd
---------- Post added at 10:14 PM ---------- Previous post was at 09:24 PM ----------
mais 14 said:
I don't have any problem with WiFi
For certified use the option for user's costum ROM
Need register with GSF I'd[/QUO
For WiFi try clear cache or factory reset from recovery you lose all data.
you didn't erase vendor IMG?
Click to expand...
Click to collapse

I tried to flash again
But still wifi not working.
I cannot turn it on, when i enable it, it goes directly back to disable.
Did a factory reset from twrp
Did a clean cache/data from the app "settings"
Did a reset of wifi
Nothing works

RalphMalph said:
I tried to flash again
But still wifi not working.
I cannot turn it on, when i enable it, it goes directly back to disable.
Did a factory reset from twrp
Did a clean cache/data from the app "settings"
Did a reset of wifi
Nothing works
Click to expand...
Click to collapse
Flash Boot IMG patched boot 10.2.5 EU?
Your phone ships with global rom ?

mais 14 said:
Flash Boot IMG patched boot 10.2.5 EU?
Your phone ships with global rom ?
Click to expand...
Click to collapse
Yes... Global rom
And no i did not try to flash that. Tried a patched boot file that i made myself. Maybe it didnt work or i missed something. Couldnt find that 10.2.5 file

RalphMalph said:
Yes... Global rom
And no i did not try to flash that. Tried a patched boot file that i made myself. Maybe it didnt work or i missed something. Couldnt find that 10.2.5 file
Click to expand...
Click to collapse
If you want flash this patched Boot .
The link is OK now from first post.

mais 14 said:
If you want flash this patched Boot .
The link is OK now from first post.
Click to expand...
Click to collapse
Unfortunately didn't work
Which gsi image did you use?