{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06
Reserved
Thanks to everyone who contributed
gg :highfive:
Good job, but there's no reverter yet?
thank for still keep my phone alive
@Astrako G610F hardware keys aren't working...and UI lags wen on home screen with h vendor wallpaper...
EDIT: Changed wallpaper and no lags....
I can give u logs dmesg whatever wen u need em....
Gr8 work tho sar....
TheRealModder said:
Good job, but there's no reverter yet?
Click to expand...
Click to collapse
Dude it uses the "old" create vendor and revert vendor...
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
osm work.....:good:
what you mean when you say: "Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UP-TO-DATE RECOVERY. Check my OrangeFox or SHRP builds. "Could you explain
mistiko247 said:
what you mean when you say: "Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UP-TO-DATE RECOVERY. Check my OrangeFox or SHRP builds. "Could you explain
Click to expand...
Click to collapse
By vendor partition required he means to have a Vendor partition using ananjaser's create vendor 2 (make sure u flash 2.0 not v1)....
And recovery thingy is obvious....
G610L support
Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
OneDrive folder
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
Does it support G610L??
I am on phh's v220 and everythings fine except a reboot which is triggered during a call. I can answer a call and have no audio problem but then screen goes black and the phone reboots.
Edit: I am using ARES 3.1 (4.1 was not built) + FIX-REBOOT-BE-GONE. Also, I think this problem is related to a problem in the sensor which makes the screen go black during a call.
Support all variants of G610
---------- Post added at 04:00 PM ---------- Previous post was at 04:00 PM ----------
Canhkhoi said:
Does it support G610L??
Click to expand...
Click to collapse
Support all variant of G610
hola..
Debo admitir que es una bonita sorpresa el funcionamiento de mi 610f con H-Vendor.
No imagine que el AOD funcionara tan bien y que la suspensión del teléfono fuera casi inexistente en comparacion con los otros proyectos similares. Lo unico que pod
Transalation: Hello..
I have to admit that my 610f's performance with H-Vendor is a nice surprise.
Do not imagine that the AOD worked so well and that the suspension of the phone was almost non-existent compared to the other similar projects. The only thing i could.
Using G610f. It wont boot. restarting goes to download mode. I tried havoc os 3.6 , 3.4 evolution x 3.3. all have the same issue
santhosh ravi said:
Amazing vendor thanks. Is there any way to fix the screen delay??
Click to expand...
Click to collapse
wut u mean screen delay??
---------- Post added at 08:41 AM ---------- Previous post was at 08:41 AM ----------
leinadagisiaol said:
hola..
Debo admitir que es una bonita sorpresa el funcionamiento de mi 610f con H-Vendor.
No imagine que el AOD funcionara tan bien y que la suspensión del teléfono fuera casi inexistente en comparacion con los otros proyectos similares. Lo unico que pod
Click to expand...
Click to collapse
English?!
Live0verfl0w said:
wut u mean screen delay??
---------- Post added at 08:41 AM ---------- Previous post was at 08:41 AM ----------
English?!
Click to expand...
Click to collapse
On G610f all treble vendors I've tried so far have screen delay which means everytime i press the power button i have to wait 5-10 seconds for the phone to wake up
santhosh ravi said:
On G610f all treble vendors I've tried so far have screen delay which means everytime i press the power button i have to wait 5-10 seconds for the phone to wake up
Click to expand...
Click to collapse
That isnt screen delay, thats wakeup delay...
nd ur question read the BUGS section in OP.
Blame ShamSung for the bugs.
santhosh ravi said:
Using G610f. It wont boot. restarting goes to download mode. I tried havoc os 3.6 , 3.4 evolution x 3.3. all have the same issue
Click to expand...
Click to collapse
My bad I flashed arm64 a only. Fixed it by flashing a /b. guess i should read the thread more. anyways another bug i found is that hardware keys doesnt work on g610f. I am using havoc os 3.6. The option to use hardware keys is completely greyed out. I dont know if this is a gsi bug or the vender bug. Anyone having this issue on other phones?
santhosh ravi said:
My bad I flashed arm64 a only. Fixed it by flashing a /b. guess i should read the thread more. anyways another bug i found is that hardware keys doesnt work on g610f. I am using havoc os 3.6. The option to use hardware keys is completely greyed out. I dont know if this is a gsi bug or the vender bug. Anyone having this issue on other phones?
Click to expand...
Click to collapse
You have to disable gestures in Havoc Customization menu if you want to use HW buttons.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Here I bring you the first Pie flagship ported rom to the exynos7870. I've spent countless hours working in this project, so respect my work and don't KANG this rom. Ask me first if you want to port it to another device.
FEATURES
A320FL/F/Y supported
Android Pie ported from S9 (SM-G960F)
One UI
Arm64 native
Kernel 3.18.91 compiled from A600FNXXU3BSC5 sources. Built in Permissive.
Clean, debloated, fast, stable
S10 CSC with additional features
Infinity wallpapers
Edge features
Bixby Voice, Routines, Bixby Vision
Secure folder
Digital wellbeing
Call recording, screen recording
Dolby enabled for speaker and BT
VoLTE supported
...
KNOWN BUGS
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
Face unlock doen't work if you have enabled fingerprint unlock
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or A3 limitation
ROOT
Flash Magisk as usual
SCREENSHOTS
https://imgur.com/a/7JSc1jD
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this port
@ananjaser1211 for his general help, kernel commits and hard work with 7870
@corsicanu for giving me access to theA720S Korean dump
@McFy for his general help and hard work with LOS
@khongloi113 for the secure folder mod
@topjohnwu for Magisk
Testers from Telegram group
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM S9 PORT, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://github.com/Astrako/A600FNXXU3BSC5/tree/OneUI
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 2.0
Stable Release Date: 2019-08-23
Created 2019-08-23
Last Updated 2019-09-23
H-ROM S9 PORT V2.0 (23/09/2019)
Link
H-ROM S9 PORT V1.0 (23/08/2019)
CHANGELOG
Initial build
Based on G960FXXU5CSF2 firmware
June security patch
Lastest arm64 r28p EGL graphic drivers
Wifi, BT, GPS, etc should finally work as expected
Updated GAPPS and Samsung Apps
Bugs: Smart View doesn't work. Working on a fix
INSTALLATION
Flash the repartition script if you haven't done
Wipe system, data (clean install recommended), vendor, dalvik&cache and cache
Flash rom zip
First boot will take a bit of time, so be patient.
DOWNLOAD
Mega: http://bit.ly/hrom_s9
MD5: da64497ebd141c41032849f7f344ba76
No mirror links please!
As usual, donations are not required. But if you want to say me thanks for all the hours spent in this project, just push "Thanks" button
reserved too
greate work bro!
You are impressive my friend!
Congratulations!
Awesome!
Congratulations, this must've been hard.
Mate you're unstoppable, thank you for your work !
Maybe a silly question, but what are the main differences with the A7 Port V2 (except for edge features and Infinity wallpapers) ?
Are you planning to maintain both A7 and S9 port (just to know if I switch from A7 or if I can stay on it for now, not asking for ETA) ?
Thank you dev.
Another great work
Guyllheaume said:
Mate you're unstoppable, thank you for your work !
Maybe a silly question, but what are the main differences with the A7 Port V2 (except for edge features and Infinity wallpapers) ?
Are you planning to maintain both A7 and S9 port (just to know if I switch from A7 or if I can stay on it for now, not asking for ETA) ?
Thank you dev.
Click to expand...
Click to collapse
My intent is to update A7 port more regularly. S9 port is harder to keep updated tho, so this should have lesser updates (maybe one more until the end of the year, idk). Anyway I have in mind new projects to see where is the limit with this phone.
Also soon in september I will go to two weeks holidays so won't be any updates in that period
Here we are, after fighting with RIL for a week. :laugh:
Awesome work my bro.
Astrako said:
My intent is to update A7 port more regularly. S9 port is harder to keep updated tho, so this should have lesser updates (maybe one more until the end of the year, idk). Anyway I have in mind new projects to see where is the limit with this phone.
Also soon in september I will go to two weeks holidays so won't be any updates in that period
Click to expand...
Click to collapse
Can't wait to see what's your cooking for A3, thanks for your quick answer.
And have nice holidays !
repartition script is it necessary?
mehmettahacelik said:
repartition script is it necessary?
Click to expand...
Click to collapse
Read the OP
Stop asking for support if you dont push thanks in OP, is very disgusting
Astrako said:
thanks a lot for updated A3 for new rom for still work on A3 2017 Device
---------- Post added at 01:25 PM ---------- Previous post was at 01:19 PM ----------
thanks for still working in A3 17 Device and thanks for give us some amazing rom ?
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Me da un fallo al instalar la ROM y he seguido todos los pasos para la instalación, cómo puedo instalar?
mari0perez_ said:
Me da un fallo al instalar la ROM y he seguido todos los pasos para la instalación, cómo puedo instalar?
Click to expand...
Click to collapse
English please, so we can read.
Great to see another port!
Has anyone used both the S9 and A7 (or J6) port and can compare in terms of performance/battery life...?
Great work as always friend.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
I've put a huge amount of time and effort in this SOLO project (no other dev has been involved), so respect me and respect my work. You are NOT allowed to use this rom, its vendor or any of the other files included as base for your projects.
FEATURES
OneUI 2.0 under Android 10, ported from the SM-A750FN
All A320 variants should be supported
Arm64 with Treble support
Fully deodexed
SIMPLE-KERNEL included, compiled from A600FNXXU5CTB9 sources. Built permissive
Deknoxed, debloated, and removed all samsung useless security stuff in rom and kernel level
N20 multi CSC with additional features (call recording, etc)
And many more!
KNOWN BUGS
Light in capacitive buttons for those devices with hardware buttons
Some 3rd camera apps like footej don't work. Whatsapp video calls could be bugged too. If so, use Whatsapp business
Other inherent bugs from OneUI and/or 7870 limitation
You tell me
DOWNLOAD
Current version: 6.0 (02/12/2020)
More info in 2nd post
INSTALLATION
Vendor partition is required.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash rom zip
Reboot
First boot will take much time, be patient
SCREENSHOTS
https://imgur.com/a/Q5Ysvoz
ROOT
Flash Magisk canary. Stable Magisk will give bootloop.
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978 for their huge contribution to the 7870 development
Thanks to my testers and @neel0210 for camera rework
And thanks one more time to @SaiFurR for his design work with banner
@topjohnwu for Magisk
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this rom you can make me very happy just pushing THANKS
XDA:DevDB Information
H-ROM A7 PORT, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/tree/simple_q_permissive
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Oreo bootloader
Version Information
Status: Stable
Current Stable Version: 3.0
Created 2020-05-11
Last Updated 2020-08-27
H-ROM A7 PORT V6.0 (02/12/2020)
November security patch
Fixed Dual sim detection
Added High Perfomance mode
Setting volume in different apps should be fixed
You will need around a 3100Mb system partition, so if you dont have it, go and flash my repartition script
GoogleDrive folder
Mega
Md5: a9f3cacee034142024fd2802eed21b61
Spoiler: Old versions
H-ROM A7 PORT V5.0 (27/08/2020)
Spoiler: Old versions
Firmware ported from A750FNXXU4CTG2. July security patch
Added SIMPLE kernel
Echo in calls should be fixed. Other minor bugs can be present depending the phone/variant
You will need around a 3100Mb system partition, so if you dont have it, go and flash my repartition script
GoogleDrive folder
Mega
Md5: 87fc5ef5c031a2f586d762debcf7b3e0
Added a navbar enabler/disabler to the download folder
H-ROM A7 PORT V4.0 (19/07/2020)
Firmware ported from A750FNOXM4CTE3. June security patch
Specifig bugs: echo in calls
GoogleDrive folder
https://drive.google.com/drive/folders/13UG-hdqWU8nud1JCm6DD0vQXAQjeJCVP
Remember, a lot of time has been put in this project. If you like it and want to support me, no donations at all are required, just pushing thanks buttons.
reserved
great work as always sar
Nice work mate! Keep up with your excellent work as always!
Well, congratulations once more mate!
Great work:laugh:
Can I use this rom for G610F....??!
.
If NO
pleas port it,for J7 prime
.
Tanks so mach
Astrako sar rocks as always!!!!!!!!!!!!!!!!!!!!
Supported G610xx Device?
Is yhis supported for a720f?
SaintReial said:
Is yhis supported for a720f?
Click to expand...
Click to collapse
for the god sake, NO, IS NOT SUPPORTED. ONLY A320FL/F/Y ARE SUPPORTED! READ THE OP!
And STOP spamming this thread with the same over and over.
I wasn't expecting this lmao
SaintReial said:
Is yhis supported for a720f?
Click to expand...
Click to collapse
Stop spamming!!!
Hello why in j6 port 1.0 sucsedd and turn but a7 port 3.0 install but doesnt turn
This is rom For A720F 2017 ??? WHEN FOR A720F 2017 PORT ROM ANDROİD 10.
---------- Post added at 02:01 PM ---------- Previous post was at 01:45 PM ----------
I am looking through all the forums but there is no port android 10 for A7 2017. why is that?
huzunbaz said:
This is rom For A720F 2017 ??? WHEN FOR A720F 2017 PORT ROM ANDROİD 10.
---------- Post added at 02:01 PM ---------- Previous post was at 01:45 PM ----------
I am looking through all the forums but there is no port android 10 for A7 2017. why is that?
Click to expand...
Click to collapse
Cuz noone wants to build for your device. Build it yourself bruh.
Does radio work?
Thanks For the Amazing ROM
I have been using Astrako's A7 V2 port since it was released on my SM-A320Y, with only a few minor bugs. With this ROM Astrako has managed to do something i didn't think possible, make it even better.
The new V3.0 rom is performing brilliantly, i have only encountered one minor bug, which is that an error pops up if both fingerprint and face unlock are enabled.
For the people who were wondering what the performance is like in comparison to the A7 V2 rom (which was already better than stock), it is significantly faster. Everything feels very smooth and can have many apps open without any lags. Battery performance has been good too, about the same as the V2 rom.
Thank you so much again Astrako for your amazing work on this ROM.
sam12321 said:
I have been using Astrako's A7 V2 port since it was released on my SM-A320Y, with only a few minor bugs. With this ROM Astrako has managed to do something i didn't think possible, make it even better.
The new V3.0 rom is performing brilliantly, i have only encountered one minor bug, which is that an error pops up if both fingerprint and face unlock are enabled.
For the people who were wondering what the performance is like in comparison to the A7 V2 rom (which was already better than stock), it is significantly faster. Everything feels very smooth and can have many apps open without any lags. Battery performance has been good too, about the same as the V2 rom.
Thank you so much again Astrako for your amazing work on this ROM.
Click to expand...
Click to collapse
Thanks Sam. I'm running the A7 V2 port and am thinking of upgrading to V3. I was just wondering how bad the echo in calls is with A7 V3 ROM.
Thanks
David
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06
Reserved
very nice work sar for our old devices
As always, nice work.
Offffffffff finally
Astrako said:
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
OneDrive folder
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-06-16
Click to expand...
Click to collapse
Now my J7 can die in peace after having ARM64 Pie , ARM64 Q and now A/B vendor, Awesome work sar as always
#Saviour_of_7870
Big thanks!
You are awesome developer..
any plans for A520F ?
blunatic said:
any plans for A520F ?
Click to expand...
Click to collapse
Don't get your hopes up. Astrako only works for A3 lol. So don't expect it for your device or any other stuff.
For now, The GSI I have installed is :
AncientOS-Civilization by igor-s7
Just a quick notice
Download Arm64 A/B GSI, not A-Only
I think that is the most stable of them all for now, Although you have to fix the Device Certification error from Google, you can fix this easily though
NOTE : The GSI comes with pre-installed GAPPS, I personally didn't flash OpenGapps on this one
Step 1 : Continue to set up device, ignore all the error showing in the notifications
Step 2 : Go to Google Chrome and download "Device ID"
From there, Go and Copy the Google Service Framework ( GSF )
Step 3 : Tap the notification error, and it should show you 3 options
Now you should pick the "For Custom ROM Users", after that, you will be redirected to Google Chrome.
Step 4 : Paste your Google Service Framework ( GSF ) where it should be, you will then be met by a reCAPTCHA, after that register your device.
Step 5 : Clear Data and Cache of Google Services and Google Play and restart your device.
NOTE : Your device is still not certified, but it makes the error obsolete
For those who are asking, Yes NFC works
And Gaming is pretty outstanding, Camera has some errors sometimes, it is a new built project, so expect other bugs
Thank you again for all the developers who created these projects. Cheers
This is rom for A7 2017 working???
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
Does this rom work for A7 2017 ???
huzunbaz said:
This is rom for A7 2017 working???
---------- Post added at 02:30 PM ---------- Previous post was at 02:27 PM ----------
Does this rom work for A7 2017 ???
Click to expand...
Click to collapse
Do you see it on the list? No? Than not. Different SoC.
Having a really hard time installing other GSI because most of them doesn't really work, like I tried installing Corvus and DerpFest, and it just bootloops, can someone help
But in AncientOS-Civilization it works like magic, no bootloops
Just installed HavocOS 3.6 ROM without Gapps built in, manually installed though. Everything works, no errors so far, I've set up my backups, my apps and nothing is out of the ordinary.
I've tried Andy Yang's Lineage OS builds and while they work perfectly, they lack hardware button enabling. Havoc works just fine too but it lacks hardware button customization.
I'm on Crdroid 6.5 gsi and it has all the customization features, works flawlessly, better than the build provided by Astrako.
Filipe Baltazar said:
I've tried Andy Yang's Lineage OS builds and while they work perfectly, they lack hardware button enabling. Havoc works just fine too but it lacks hardware button customization.
I'm on Crdroid 6.5 gsi and it has all the customization features, works flawlessly, better than the build provided by Astrako.
Click to expand...
Click to collapse
Can send link of the GSI?
Also, I think you can update the Kernel by going to SPART4NICUS' github of AresKernel :good:
Yarida said:
Can send link of the GSI?
Also, I think you can update the Kernel by going to SPART4NICUS' github of AresKernel :good:
Click to expand...
Click to collapse
https://sourceforge.net/projects/treblerom/files/crDRom/2020.04.23/
I'll check spart4nicus
Poll mumm
About the 7870 Exynos SoC and further development:
The Samsung Galaxy Tab A 2016 has same SoC, so I guess it make sense to bundle or exchange knowledge. Maybe both (or better three sides) can learn. Maybe (one can dream) we can get rid of the nasty echo in calls or bluetooth call bugs.
Let's look what @Astrako and the devs for Tab @Valera1978 (who has initiated a lot for this SoC) and @TALUAtXDA will create in next future.
For those trying it with LOS and microG. There is a problem with location provider. For those who need that - better wait. Beside that I am very impressed.
Regarding echo in calls: ATM I am using Treble+LOS16 and my partners did not report echos if I call via telegram. What is the difference and couldn't be used this micro/audio driver for mobile phone calls too?
And for BT calls: Is it same kind of problem? As BT headphones work well (didn't try that with telegram).
Probably it is not a new idea ... so no offence.
Its hard to get a phone in that size and weight, so please keep it alive.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
Atention: Make sure you have the latest Q bootloader installed (OneUI 2.0), it's necessary for fingerprint!
Make sure you have a custom recovery installed(TWRP is the preferred recovery)
Download the latest Resurrection Remix Rom & the latest GApps package
Boot into recovery
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash ResurrectionRemix Rom
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 10 minutes.
ROM Download
GApps
Resurrection Remix Source
Device Source
Device Tree Common
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team
And Of Course To All The Supporters, Donators And Users
Join our Telegram channel : https://t.me/resurrectionremixchat
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
XDA:DevDB Information
Ressurection Remix for Samsung Galaxy J6+, ROM for the Samsung Galaxy J6+
Contributors
BarryBlackCat, GeorgeV22, ataberkozen
Source Code: https://github.com/ResurrectionRemix
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Oneui 2.0
Version Information
Status: Stable
Current Stable Version: v8.6.5
Stable Release Date: 2020-12-15
Created 2020-10-05
Last Updated 2020-12-15
8.6.5 Update is here!
Changelog:
Updated all blobs from oneui 2.0 (Android 10 - J610GUBU4CTI1);
Fixed FM Radio;
Fixed a problem with two SIM Cards;
RR version is 8.6.5
Merged Dezember Security Patch
Complete changelog of RR can be found here.
Download: click here.
New Update - 12/25/2020
Changelog:
Updated FP to coral dezember (to pass cts);
Fixed a problem with audio recording in camera.
FingerPrint não funciona.
i updated to android 10, but twrp 3.3 doesn't work with android 10, orange fox doesn't work ne android 10.
you have information to download functional twrp with android q
altemonmoura said:
FingerPrint não funciona.
Click to expand...
Click to collapse
As I said, you need to update to latest Q bootloader, using odin.
Jimmy.camacho said:
i updated to android 10, but twrp 3.3 doesn't work with android 10, orange fox doesn't work ne android 10.
you have information to download functional twrp with android q
Click to expand...
Click to collapse
Use shrp. https://sourceforge.net/projects/sh...P_v2.3.2_j6primelte-144621072020.zip/download
Use shrp.
I can't flash SHRP with twrp.
flash with odin?
Jimmy.camacho said:
Use shrp.
I can't flash SHRP with twrp.
flash with odin?
Click to expand...
Click to collapse
That's weird. Try to flash shrp using odin. Extract recovery.img and compress to .tar
If you don't know how to do that, check pm.
altemonmoura said:
FingerPrint não funciona.
Click to expand...
Click to collapse
Show - Funfou.
BarryBlackCat said:
Reserved
Click to expand...
Click to collapse
It worked, it really is an excellent job
everything works perfectly and is very fluid
great job
So far everything working fine.
Pretty ROM.
I was wondering if it is possible to synchronize the screen with ScreenMirror.
Whenever I try to do the cell phone reboots.
This occurs in all ROMS
Queria saber se é possivel fazer sincronismo de tela com o ScreenMirror.
Sempre quando tento fazer o celular reinicia.
Isso ocorre em todas as ROMS
altemonmoura said:
Show - Funfou.
Click to expand...
Click to collapse
Me ajuda na biometria, o meu não funcionou.
---------- Post added at 02:08 PM ---------- Previous post was at 01:53 PM ----------
fingerprint did not work, please help me.
A biometria não funciona,mais a ROM esta eselente
Can u guys please read the entirely post before reporting anything related to fingerprint?
Please, use english. Any report in others languages will be ignored.
Worked for me so fine
No bugs
Very beautiful , every thing so fine.
Thanks
Please share screenshots
Great job. I am not fluent in English and my translation technique is really bad. That is why I will explain myself in short sentences.
I installed your ROM on my SM-J610G device.
I have only found two flaws:
The first is simpler to explain, it consumes a lot of the battery.
The second is more complex. I have two SIM CARDs but even though I wanted to deactivate one, they both remain active.
The prediction I make is the following: Configuration >> Networks and Internet >> SIM2 (or SIM1) >> Use SIM
At that moment the screen freezes. And I have to cancel the process.
Sorry I can't show the log, but MatLog asks for ROOT privileges and I don't like to root a phone until strictly necessary. For now, if I am not going to use SIM2 I simply remove it from the device.
If possible I appreciate solving a problem that is rather uncomfortable rather than strictly necessary.
leaderhawk0 said:
Worked for me so fine
No bugs
Very beautiful , every thing so fine.
Thanks
Click to expand...
Click to collapse
Only. Bug is fm radio does not work
Edwindrake said:
Great job. I am not fluent in English and my translation technique is really bad. That is why I will explain myself in short sentences.
I installed your ROM on my SM-J610G device.
I have only found two flaws:
The first is simpler to explain, it consumes a lot of the battery.
The second is more complex. I have two SIM CARDs but even though I wanted to deactivate one, they both remain active.
The prediction I make is the following: Configuration >> Networks and Internet >> SIM2 (or SIM1) >> Use SIM
At that moment the screen freezes. And I have to cancel the process.
Sorry I can't show the log, but MatLog asks for ROOT privileges and I don't like to root a phone until strictly necessary. For now, if I am not going to use SIM2 I simply remove it from the device.
If possible I appreciate solving a problem that is rather uncomfortable rather than strictly necessary.
Click to expand...
Click to collapse
That's weird. I have the same variant but I didn't test with two sims, I'll take a look.
leaderhawk0 said:
Only. Bug is fm radio does not work
Click to expand...
Click to collapse
Yeah, sorry about that. I think I know what's wrong with fm radio and I'll release a new update tomorrow or Sunday with a probably fix for that and a fix for an old bug with wifi + bluetooth
hi, i don't have experience at install recovery and rom.
please give odin and custom recovery with tar extension link.
and gapps i want only google play service and store, whitch pack i must download?
nimakheradmand said:
hi, i don't have experience at install recovery and rom.
please give odin and custom recovery with tar extension link.
and gapps i want only google play service and store, whitch pack i must download?
Click to expand...
Click to collapse
If you have read the instructions correctly, you should know that you have to have Android 10 with the OneUI 2.0 on your device, personally, Android 10 for my SM-J610G has not arrived in my country so I installed a ROM from another country, Chile (CHO) that does.
I let it reboot until the beginning and then I turned it off and installed the TWRP (below I will leave you the link where the installation procedure appears, which is very simple) please do not forget to do the patching before installing the RRQ. The rest is very easy.
As for the OPENGAPPS, you should use those that say ARM, Android 10 and the variant I use is the NANO (my reasons) but the minimum is the one that says PICO. In any case, you can press any variant and download the text file "VERSION INFORMATION" that tells you which applications each one brings before downloading the package.
To install TWRP, click here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
SELinux is enforcing
WiFi
Audio
RIL
GPS
Camera
Flashlight
NFC
Fingerprint on display
Vibration
Bluetooth
FM Radio
Cast
Any other thing that is not listed in the "What doesn't work" list
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
Support group
ArrowOS channel for cepheus
Changeloge
-2021/04/10
Synced with last sources
April security patch
Add Smart charge
Use pixel fingerprint
Some other improvements from ROM
HOW TO INSTALL
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
HOW TO UPDATE
update via OTA is not available yet, but will be as mush as possible
Reboot to recovery
Flash the new ROM
Flash any addons that you were using previously (GApps, Magisk...)
Reboot
DOWNLOADS
Click here to Download
Tip: choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/EcrosoftXiao/kernel_xiaomi_cepheus (big thanks to EvasiOn, without him won't be this work)
XDA:evDB Information
ArrowOS 11 for cepheus, ROM for the Xiaomi Mi 9
Contributors
lamjiidii1
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 21.3.10
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-02
Last Updated 2021-04-10
Thanks for the build. Everything I need is working except for ctsProfile is not passing. No modules installed or root apps.
iOrpheus06 said:
Thanks for the build. Everything I need is working except for ctsProfile is not passing. No modules installed or root apps.
Click to expand...
Click to collapse
Hi, I'm glad that you like it.
CTS I know about it and I'm working on it, will be fixed as soon as possible
Hey, I am running this and it seems to be an overall great rom! Thank you for your work!
Do you plan on supporting the additional AI button? Currently I cannot seem to be able to map it when trying to use the old magisk AI button remapper.
I am using the latest china beta firmware for that matter, could it be related to that?
I have installed the Vanilla rom and I have to say that it is a very good rom, everything seems to be going very well. What I don't see to be able to update via OTA in future updates, don't you have it? And what is the difference between Rom Vanilla and Gapps? Greetings and thank you very much for your effort in making this great rom very functional
Thanks for the build
A really great ROM! I will stay with that for now!
I took the variant with GAPPS, then rooted it with Magisk.
- the installation process went completely smoothly
- Fingerprint works really well (both the setup and in previous use)...Faceunlock as well
- Android Auto works fine
- ANX camera works (at least the video mode; i used the version "ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip" and "48MPFixR_201.DullAggressiveHylaeosaurus.zip")
- 1% battery drain in 7h in flight mode
... and now an update with a working CTS profile! That would be great!
But as I said, great ROM! Thanks a lot for this!
Dariusdd said:
Hey, I am running this and it seems to be an overall great rom! Thank you for your work!
Do you plan on supporting the additional AI button? Currently I cannot seem to be able to map it when trying to use the old magisk AI button remapper.
I am using the latest china beta firmware for that matter, could it be related to that?
Click to expand...
Click to collapse
Hi, I'm happy that you like it
Well, I find the Al button is a little annoying, especially when it comes to accidentally touching. I think most users with the same note, I'll think about it again.
juansan10 said:
I have installed the Vanilla rom and I have to say that it is a very good rom, everything seems to be going very well. What I don't see to be able to update via OTA in future updates, don't you have it? And what is the difference between Rom Vanilla and Gapps? Greetings and thank you very much for your effort in making this great rom very functional
Click to expand...
Click to collapse
Hello, I'm planning to make it official, so OTA updates are coming soon.
The difference between gapps version and vanilla is: vanilla it's coming without google services/apps and that gapped version come with google apps included, I hope you got it
RealNBB said:
A really great ROM! I will stay with that for now!
I took the variant with GAPPS, then rooted it with Magisk.
- the installation process went completely smoothly
- Fingerprint works really well (both the setup and in previous use)...Faceunlock as well
- Android Auto works fine
- ANX camera works (at least the video mode; i used the version "ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip" and "48MPFixR_201.DullAggressiveHylaeosaurus.zip")
- 1% battery drain in 7h in flight mode
... and now an update with a working CTS profile! That would be great!
But as I said, great ROM! Thanks a lot for this!
Click to expand...
Click to collapse
Hi, thanks for your feedbacks
Well, the new release is coming, I will push it with April security patch, and also CTS I will work on it, so probably will be fixed next update
can you remove the battery icon and leave only the percentage?
if I go to "status bar items" it deletes everything and not just the icon
Hi to all, the new update has been released
It's come with April security patch and other improvement, Enjoy
lamjiidii1 said:
Hola a todos, la nueva actualización ha sido lanzada
Ha llegado con el sediento de seguridad de abril y otras mejoras, Disfrutarlo
Click to expand...
Click to collapse
Thank you very much
lamjiidii1 said:
Hi to all, the new update has been released
It's come with April security patch and other improvement, Enjoy
Click to expand...
Click to collapse
Hi. I would like to know if the ROM has a fingerprint animation
Thanks for your time and you ROM.
It's not official yet?
austick said:
Hi. Thanks this is my first asop on mi9 I use arrow on pocophone and mipad4.
I would like to know if the ROM has a fingerprint animation and don't have the mic and screenshot bug (3 fingers) like other aosp ROMs on mi9. The last question is if necessary flash fw or is include.
Thanks for your time and you ROM.
Click to expand...
Click to collapse
Hello, That's problem with weak microphone sound caused by "Google recorder" which is not included, meaning that problem is not present. Even with the "swipe with three fingers to screenshot" feature, multi-touch works, in some other ROMs this isn't there, but here everything looks fine. And also FW is included, don't need to flash anything,
There will be official support soon
lamjiidii1 said:
Hi, I'm happy that you like it
Well, I find the Al button is a little annoying, especially when it comes to accidentally touching. I think most users with the same note, I'll think about it again.
Click to expand...
Click to collapse
Hi, save me installing to find out. As a left handed user I need the back button on the right like Stock on Mi or Paranoid Android Rom.. Which way round is this one? Thanks.
lamjiidii1 said:
ArrowOS
ABOUT
ArrowOS is an AOSP/CAF based project started with the aim of keeping things simple, clean and neat.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate
Blog: blog.arrowos.net
Checkout more documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything
SELinux is enforcing
WiFi
Audio
RIL
GPS
Camera
Flashlight
NFC
Fingerprint on display
Vibration
Bluetooth
FM Radio
Cast
Any other thing that is not listed in the "What doesn't work" list
WHAT DOESN'T WORK?
You tell me
Be sure to include a log : check how to
Support group
ArrowOS channel for cepheus
Changeloge
-2021/04/10
Synced with last sources
April security patch
Add Smart charge
Use pixel fingerprint
Some other improvements from ROM
HOW TO INSTALL
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
HOW TO UPDATE
update via OTA is not available yet, but will be as mush as possible
Reboot to recovery
Flash the new ROM
Flash any addons that you were using previously (GApps, Magisk...)
Reboot
DOWNLOADS
Click here to Download
Tip: choose Arrow version, choose build type: "GAPPS" or "VANILLA" to download.
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Kernel Source: https://github.com/EcrosoftXiao/kernel_xiaomi_cepheus (big thanks to EvasiOn, without him won't be this work)
XDA:evDB Information
ArrowOS 11 for cepheus, ROM for the Xiaomi Mi 9
Contributors
lamjiidii1
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: MIUI 21.3.10
Based On: AOSP
Version Information
Status: Stable
Created 2021-04-02
Last Updated 2021-04-10
Click to expand...
Click to collapse
How do I get ArrowOS and Magisk to boot to get root?
Help... thanks
Hola, instalé la última versión de la rom tanto Vanilla como Gapps y encuentro el problema de que la aplicación Chrome se cuelga mientras navego, mi pantalla se congela y al cabo de un rato me sale un mensaje si quiero cerrar la aplicación, espérame o enviar un mensaje de error, ¿le pasa eso a otra persona?
Alguien tendría o sabría dónde descargar la versión anterior, eso estuvo muy bien para mí
De lo contrario, una muy buena rom.
----------
MOD EDIT: English Translation Below
Hello, I installed the latest version of the rom both Vanilla and Gapps and I find the problem that the Chrome application hangs while browsing, my screen freezes and after a while I get a message if I want to close the application, wait for me or send an error message, does that happen to someone else?
Someone would have or know where to download the older version, that was great for me
Otherwise a very good rom.