Related
ORGANIC KERNEL
"Best out of the Rest"
Click to expand...
Click to collapse
FEATURES
-Compiled with latest GCC
-F2FS and sdcardfs support
- Cpu overclocked to 1.67 GHz (under safe parameters)
-CPU boost driver
-added support to stop screenburning
-some other UnderTheHood tweaks
Changelog For Organic 1.0
-add GPU tweaks
-enable wireguard
-add additional power drivers
- enable idling GPU frequency (better battery management)(same as 5A)
-based on M based source (thanks to Murali Vijay again)
Flashing Guide
- Reboot to recovery
- Backup your current kernel(boot.img)
- Go to install
- Flash kernel zip
- Reboot
- Enjoy!!
Credit:
MuraliVijay for Source
Note :- Based on M based source , so flash this kernel on M based rom only
XDA : DevDB Information
Organic Kernel, Kernel for Xiaomi Redmi 4A
Contributors
@theorganisms
Join our telegram group for support and
Bug report
https://t.me/organickernel
Kernel Source
https://github.com/TheOrganisms/kernel_organic
Version Information
Status: Stable
Download
SourceForge
Current Stable Version v1.0
Current release :- 02/03/2019
stable release :- 02/03/2019
First release :- 01/03/2019
Nice sar gonna try:good:
Thank you.it's good.l support you.
INTRODUCTION
Canting is a kernel based on Google Common 4.9 merged over CAF-kernel.lnx.4.9.r25-rel. Built to provide security and stability improvement
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
FEATURES----------------------------------------------
• NOTE: Don't flash this kernel over MEMEUI.
• Linux version 4.9.280
• CAF Tag LA.UM.8.3.c25-03100-sdm845.0
• Build with Clang-12
• CPU Governors: schedutil, powersave
• I/O Schedulers: noop, cfq
• Compat vDSO from Pixel kernel
• TCP Congestion Algorithm: bbr, westwood, reno, cubic
• WireGuard VPN support (Current version: 1.0.20210424)
• Boeffla wakelock blocker (Nothing is blocked by default)
• Simple Low Memory Killer
• Sound Control: Speaker, Microphone, Headphone (Per-channel control)
• KCAL & KLapse Interface
• Vibration Intensity Control
• backlight min option
• Removed safetynet flags (no need of magisk to bypass safteynet)
• F2FS & NTFS Support
• for more info check my commits
INSTALLATION INSTRUCTIONS
Download latest kernel version
Boot to recovery
Flash kernel.zip
reboot to system
DOWNLOAD LINK
Github Latest Release
CREDITS
• nathanchance
• bgcngm
• abhishek987
• fransiscofranco
• flex1911
• All of contributors from my git history
XDA:DevDB Information
Canting, Kernel for the Xiaomi Mi Mix 2S
Contributors
khusika
Source Code: https://github.com/khusika/canting_kernel_xiaomi_sdm845
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2021-08-22
Created 2019-03-05
Last Updated 2021-08-22
Reserved
Reserved
nais
hi
nice, how can we follow the updates ?
thanks
"• NOTE: Don't flash this kernel over MEMEUI"
What the MEMEUI? This not for MIUI ?
Thank you!
heobanhki said:
"• NOTE: Don't flash this kernel over MEMEUI"
What the MEMEUI? This not for MIUI ?
Thank you!
Click to expand...
Click to collapse
Yea
jerome_l said:
hi
nice, how can we follow the updates ?
thanks
Click to expand...
Click to collapse
Just press this, or this
Release 0.2
New build is up
Changelogs :
Merge 4.9.163
Upstream with Lineage tree
Upstream with Google Common 4.9
Fix various clang warn
Add power saving flags to the panels
Introducing KLapse - A kernel level livedisplay module v4.3
clk: qcom: clk-cpu-osm: Use CLK_GET_RATE_NOCACHE
Download link in the OP, enjoy it
Release 0.4
New build is up
Changelogs :
Merge 4.9.165
Upstream with Lineage tree
Upstream with Google Common 4.9
Merge upstream f2fs-stable/linux-4.9.y
Download link in the OP, enjoy it
Very nice kurnelll guys. Running smooth <3
Release 0.5
As of many user ask me to add support of MIUI variant, start with this version and later will support it. But i won't accept kind of bugs comes from MIUI based rom. Because this kernel using lineage tree as based, which some of dummy codes from Xiaomi Opensource are not merged into lineage. And also there are fews driver was introduced in the lineage tree but not supported in the MIUI. There might some of debug codes required by MIUI but not implemented in the kernel. This why i warn you to use lineage based rom for better experience with kernel based on lineage tree.
Changelogs :
Add support for MIUI based ROM (Stupid idea)
Merge 4.9.166
Upstream with Lineage tree
Upstream with Google Common 4.9
Update default RNDIS class for Xiaomi (Fix usb tether issues)
Can it be that you, by mistake, still published the 4.9.165-Canting-0.4 version on GitHub? At least it says so under settings/about the phone.
taw62 said:
Can it be that you, by mistake, still published the 4.9.165-Canting-0.4 version on GitHub? At least it says so under settings/about the phone.
Click to expand...
Click to collapse
I think i missed this
Release 0.6
New build is up
Changelogs :
Merge 4.9.167
Upstream with Lineage tree
Upstream with Google Common 4.9
firmware: update novatek from 9.1.24 beta
Download link in the OP, enjoy it
Release 0.7
New build is up
Changelogs :
Merge 4.9.168
Upstream with Lineage tree
Upstream with Google Common 4.9
Download link in the OP, enjoy it
Release 0.8
New build is up
Changelogs :
Merge 4.9.169
Upstream with Google Common 4.9
Merge tag 'LA.UM.7.3.r1-07400-sdm845.0'
Update wireguard to 0.0.20190406
Download link in the OP, enjoy it
Not sure if it is normal?
khusika said:
New build is up
Changelogs :
Merge 4.9.169
Upstream with Google Common 4.9
Merge tag 'LA.UM.7.3.r1-07400-sdm845.0'
Update wireguard to 0.0.20190406
Not sure if it is normal? wifi can be used normally, but the status bar icon is gray (not connected).
Click to expand...
Click to collapse
tpcglcgl said:
Not sure if it is normal? wifi can be used normally, but the status bar icon is gray (not connected).
Click to expand...
Click to collapse
Yes, CAF pushed a weird commit which caused those issue.
Will be fixed today with linux 4.9.170 merged in.
Release 0.9
New build is up
Changelogs :
Merge 4.9.170
Removal of adiantum patchset
Fixed wifi issue
Download link in the OP, enjoy it
Welcome to CronosKernel for Exynos7870 Devices
J730X | J530X | J710X | J701X | G610X | A600X | J600X
Version : V5.0
Release : 1/15/2020
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
Click to expand...
Click to collapse
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro 4.9.4
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]RMM-KnoxGuard Free
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]FsyncToggle
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 9.0 and Treble GSIs
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Encryption Support for StockRoms
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
The kernel supports HKTweaks to manage and control the kernel turntables. Download Here : Github
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock (Google RMM if you had issues)
Flash TWRP Recovery that can be found in J730 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
Kernel does not include Magisk. Download it here if you need it
--Basic Info --
The kernel has been fully refreshed and made from scratch to suite the everyday-changing Exynos7870 Android experience. with support for Treble Roms, OneUI Roms, Pie bootloaders and much more optimizations and improvements to improve both the user experience and developers who choose to use this kernel
-- Credits --
@topjonhuw For Magisk
@geiti94 For patched SS libs
And my Elite-Team for their contributions to my projects and being Awesome.
Download <> Changelog <> More info In second Post
Downloads and changelogs
CronosKernel V5.0 1/15/2020 LATEST
[X] Added Front Flash support
OneUI -
Download : AndroidFileHost
Size : 10.6MB
MD5: d96883ec62a33d5ad7dc8a31cc048905
Treble -
Download : AndroidFileHost
Size : 10.4MB
MD5: bbb17801017117fb43631b6aef31675c
CronosKernel V5.0 1/13/2020
This version has been fully reworked and made from scratch, there are new/old features included. mostly its fixes to allow our kernel to work in Pie releases
WARNING : Please update your device to the latest available boot loader and modem. Devices that can be updated to Pie but running oreo bootlaoder is not going to have network.
Devices with too old bootloaders are not going to have keystore. UPDATE BEFORE YOUR REPORT A BUG
[x] Fully reworked and rebuilt from scratch
[x] based on J530FXWU5CSH7 pie source
[x] Supports J530X|J730X|J600X|A600X|J710X|J701X|G610X
[x] Compiled with linaro
[x] many compiler optimizations
[x] Disabled proca,defex,cp_secure,knox,tima,rkp,kap and other samsung security
[x] Fully permissive
[x] Disabled broken spectrum profiles
[x] AOSP specific fixes and optimizations
[x] proper sdfat driver support (for exFAT/fat32)
[x] full F2FS Support for DATA,CACHE
[x] All the previous ramdisk mods, loggers and tweaks
[x] reduced logging spam from AVC, HOTPLUG
[x] Fully disabled samsung Hotplug (Performance with no significant battery hit)
[x] Fixed an issue where 4 cores were stuck on offline
[x] CMDLINE patches for fake knox status
[x] CPU/DEVFREQ/MIF etc voltage control
[x] boeffla wakelock blocker
[x] custom default wakelock blocker list
[x] UKSM 0.1.2.3
[x] Powersuspend 1.8
[x] Dynamic Fsync
[x] Fsync/crc toggles
[x] unlocked tunables for stock governors
[x] toggle archpower and other sched improvments
[x] LZ4 Support
[x] improved block performance
[x] improved devfreq performance
[x] imrpvoed TCP performance
[x] improved memory performance
[x] Support for Pie bootloader devices
[x] wireguard support
[x] Improved CPU Overclocking
[x] GPU Control
[x] Samsung ODM support (Official / unofficial)
[x] Treble Offline Charging (With proper samsung LPM implementation)
[x] J710 Bluelight filter support
[x] Patched J730 AOD bugs from samsung
[x] A600X/J600X Keystore updated and fixed
[x] Pie bootloader/modem support
[x] Supports ARM32/64 OneUI/Treble ROMs
[x] Custom scripts to improve ROM support
[x] Support for SpagetX nuke script
[x] Support for Vendor init.d shell scripts
[x] And much much more
OneUI -
Download : AndroidFileHost
Size : 64.5 MB
MD5: 2ce69de1525b83fe83f4512efb65dc22
Treble -
Download : AndroidFileHost
Size : 63.6 MB
MD5: 1f6df083b148adc90a5fa15606cf066f
Treble Versions are meant to be used with AOSP roms (on both official and unofficial treble devices) . they have certain patches and MTP fixes
Old releases
HeliosPie V3.1 Update- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 38.3 MB
MD5: 46dec1efb1f9ac305e859f9a99ca88f1
HeliosPie V3.0 Update- Updated to Android Pie
- OneUI and GSI Support
- Disabled KnoxGuard (New RMM)
- Updated to EliteTuner V1.1
- 2AMP Charging
- And all the previous features and changes of HeliosKernel
Download : AndroidFileHost
Size : 42 MB
MD5: fc3831f0debedd9fe614798e77e005a6
HeliosPro V2.7 Update
- Updated Ramdisk
- Fixed some performance and battery issues
- Fixed WiFi and Bluetooth on Stock J5/J7 Roms
- Magisk 18.1
- Linaro 7.4 Toolchain
Download : AFH
MD5 : 8db06bf5daa879dc790f749ac315ed6a
Size : 45.7MB
Old releases and changelogs
HeliosPro V2.6 Update
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- J5 Removed 70HZ mod so fake displays can work
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.0 Included
Follow the Full change log on the Github source.
Download : AFH
MD5 : 2b11e227741486bf41dceced6c96a66c
Size : 46.6MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J530F/G/Y/YM/FM/GM/S/L/K
J730F/FM/G/GM (And any J7 variant)
Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Support for 3GB J5 2017 Variants
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
Download : AFH
MD5 : 8594de8b4f2e2292fa8b730093886ac1
Size : 47MB
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J530F/G/S/L/K
J730F/FM/G/GM (And any J7 variant)
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
P.S : J7 aod is basic until we get new Oreo drivers for J7
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- J5 2017 70Hz Refresh Rate
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Download : GoogleDrive
Source : Github
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-J7 Pro Flicker Fix/AOD
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
J530F/G : GoogleDrive
J530Y/YM : GoogleDrive
J530FM/GM : GoogleDrive
Oxygen Kernel control : GoogleDrive
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Add Support for J530FM/YM/GM/G
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
J530F/J530G : GoogleDrive
J530Y/YM/GM/FM [2 FEB]: GoogleDrive
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
Added AOD Partial Support (Reverted in source due to dangerous screen flicker issue)
Download Link : --GoogleDrive--
----------------------------------------------------
-V1.0 Initial release
--DownloadLink--
--Mega--
F.A.Q
F.A.Q
Q : Does this support Prometheus V2 ?
A : No, this only supports NEW OneUI roms released in august 2019 and up
Q : I dont have lockscreen working
A : you have a very old bootloader, update it
Q : I dot have working simcard
A : You have a very old bootloader/modem update them both
Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use HKtweaks from here
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption. it has been disabled due to wasted performance
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock 9.0 and custom Roms made after August 2019
As a final note, this kernel was made for J5 J7 at first. but it seems to be a popular choice for devs to port to their devices. so i figured to provide a version for most 7870 Devices.
This kernel was previously known as Helios 2.7 . it was available in previous J7 Prime / Nxt Roms. Please note that this is only designed to work one the current OneUI based roms.
if you want a full list of features. please either read the github post. or the changelog i left.
Enjoy
Great work sir...
Does it work on J7 Prime Android 7.0 TW?
does this already come installed on that OneUI rom or this is totally new?
Botaride said:
does this already come installed on that OneUI rom or this is totally new?
Click to expand...
Click to collapse
Updated kernel.prometheus oneui v1 have old one
---------- Post added at 03:02 PM ---------- Previous post was at 03:01 PM ----------
brian-wendrel said:
Does it work on J7 Prime Android 7.0 TW?
Click to expand...
Click to collapse
No
Tank eu sar ❤
HeliosPie V3.1
HeliosPie V3.1 Update- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 18.6 MB
MD5: 73f5c7f1b66fbad82baffcde05864dcd
Link is not working, can you fix it?
Just to know if i do something wrong or what but i flashed this kernel the new version 3.1 on my blackbird rom wich is android 9.0 and now is bootlooped.
Cardonasc03 said:
Link is not working, can you fix it?
Click to expand...
Click to collapse
Ant4rez said:
Just to know if i do something wrong or what but i flashed this kernel the new version 3.1 on my blackbird rom wich is android 9.0 and now is bootlooped.
Click to expand...
Click to collapse
Links updated redownload.
The kernel was just tested on Blackbird and it did boot. try to reflash it
ananjaser1211 said:
The kernel was just tested on Blackbird and it did boot. try to reflash it
Click to expand...
Click to collapse
Hello, thanks for answer, that is weird i tried to reflash it but is the same, only works with "Oxygen-Kernel-on7xelte-v6.0.138-ONEUI-PIE" but if i flash "HeliosPie_Kernel_V3.1_G610X" i get bootlooped. How can i help to fix this?.
If i take a kernel log with TWRP is going to be useful? Because i can't take a adb logcat when is bootlooping saying the device is unauthorized. Anyways i attached it.
ananjaser1211 said:
HeliosPie V3.1 Update
- Updated base to latest pie source
- reworked and updated helios ramdisk tweaks
- Reverted old hacks to fix some bugs
- Performance and battery greatly improved
- F2FS enabled
- Spectrum profiles added by @@SiddhantNaik1731
- LZ4 Enabled
- GPU Performance Greatly improved
- Removed EliteTuner in favour of HKTweaks by @corsicanu
- Full CPU/GPU/DEVFREQ/MIF/CAMERA Voltage control and more
- Magisk V19.1 included
Download : AndroidFileHost
Size : 18.6 MB
MD5: 73f5c7f1b66fbad82baffcde05864dcd
Click to expand...
Click to collapse
Please support asop roms
Ant4rez said:
Hello, thanks for answer, that is weird i tried to reflash it but is the same, only works with "Oxygen-Kernel-on7xelte-v6.0.138-ONEUI-PIE" but if i flash "HeliosPie_Kernel_V3.1_G610X" i get bootlooped. How can i help to fix this?.
If i take a kernel log with TWRP is going to be useful? Because i can't take a adb logcat when is bootlooping saying the device is unauthorized. Anyways i attached it.
Click to expand...
Click to collapse
as i said. redownload the kernel. you are flashing an old deleted zip
ananjaser1211 said:
as i said. redownload the kernel. you are flashing an old deleted zip
Click to expand...
Click to collapse
Thanks for answer, but i redownload the kernel and now i see that is different becasue when i flash it says "For Galaxy G610X" not like before that says "For Galaxy J600X" but anyways i get bootloop.
Edit: I solve this by changing the "cache" partition to ext4 format because i have it on f2fs funny thing because in the changelog says that supports f2fs but that change solve the problem.
It works well on my G610Y together with the blackbird Rom.
Hello Dev!, is the kernel applicable to Sm-A750? I want to use and to test it to determine what is the best kernel for my unit.
icodix said:
Hello Dev!, is the kernel applicable to Sm-A750? I want to use and to test it to determine what is the best kernel for my unit.
Click to expand...
Click to collapse
No way, this kernel is for G610X
Disclaimer :
*** Flash at your own risk! ***
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete backup in your custom recovery and safely store your personal data before you flash a new kernel.
Features :
Initial build
Latest Linux 4.14.177
Latest CAF tag : LA.UM.8.9.r1-08700-SM6xx.0
AnyKernel3
MIUI compatible
Wireguard support
Built with Clang version 11 and latest GCC
kcal: Advanced Color Control
K-LAPSE: A kernel-level livedisplay module
usb fast charge (upto 900mA)
TCP: Added bbr tcp and set it as default
added Boeffla wl_blocker
added adrenoboost (disabled by default, should enable and set it to low for smooth usage)
cpu-boost: rework scheduling
use power efficient workqueues
Added vDSO
Added fsync toggle
Overall thermal and performance improvements
Different builds for miui and custom from now on to allow miui to switch to lower refresh rates when idling
More Features will be added in the upcoming builds
Known Issues :
None, you tell ?
Download :
Github
Instructions :
Flash the zip in TWRP or FK Manager and reboot.
Credits to developers :
akhilnarang
arter97
Nathan Chancellor
XDA:DevDB Information
[PHOENIX][v1b1] HyperX Kernel, Kernel for the Xiaomi Poco X2
Contributors
TheDemon12, akhilnarang
Source Code: https://github.com/TheDemon12/HyperX-X2
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2020-04-05
Created 2020-04-05
Last Updated 2020-04-05
Changelogs
HyperX V1 Beta 3
Changelogs :
Latest Linux 4.14.177
Merged Latest CAF tag : LA.UM.8.9.r1-08700-SM6xx.0
Added vDSO
Added fsync toggle
Updated Wiregaurd
Use -O3
Overall thermal and performance improvements
Different builds for miui and custom from now on to allow miui to switch to lower refresh rates when idling
HyperX V1 Beta 2
Built with Clang version 11 and latest GCC
kcal: Advanced Color Control
K-LAPSE: A kernel-level livedisplay module
usb fast charge (upto 900mA)
TCP: Added bbr tcp and set it as default
added Boeffla wl_blocker
added adrenoboost (disabled by default, should enable and set it to low for smooth usage)
cpu-boost: rework scheduling
use power efficient workqueues
HyperX V1 Beta 1
Initial build
Latest Linux 4.14.175
AnyKernel3
MIUI compatible
Wireguard support
Reserved
What is the use of this kernal?
can you please provide the kernel features in details? this is such a little info about kernel LOL
prabin__ said:
can you please provide the kernel features in details? this is such a little info about kernel LOL
Click to expand...
Click to collapse
Its an initial build with latest linux version, kernel features will be added soon!
HyperX v1 beta2 is up!
Changelogs :
Built with Clang version 11 and latest GCC
kcal: Advanced Color Control
K-LAPSE: A kernel-level livedisplay module
usb fast charge (upto 900mA)
TCP: Added bbr tcp and set it as default
added Boeffla wl_blocker
added adrenoboost (disabled by default, should enable and set it to low for smooth usage)
cpu-boost: rework scheduling
use power efficient workqueues
Download :
Github
v1b3
HyperX v1 beta3 is up!
Changelogs :
Latest Linux 4.14.177
Merged Latest CAF tag : LA.UM.8.9.r1-08700-SM6xx.0
Added vDSO
Added fsync toggle
Updated Wiregaurd
Use -O3
Overall thermal and performance improvements
Different builds for miui and custom from now on to allow miui to switch to lower refresh rates when idling
Download :
Github
Awesome Kernel Love it Bro Thanks You So Much
No idle Draining Problem
Awesome Performance Good Battery Backup ????
---------- Post added at 09:43 AM ---------- Previous post was at 09:39 AM ----------
Need To Improve Next Version
Improve Batter Battery Backup
Little Bit Heating When Using
1. Backup & Bit Heating Need Improve
I Love This Kernel Awesomeness ?
TheDemon12 said:
Disclaimer :
*** Flash at your own risk! ***
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete backup in your custom recovery and safely store your personal data before you flash a new kernel.
Features :
Initial build
Latest Linux 4.14.177
Latest CAF tag : LA.UM.8.9.r1-08700-SM6xx.0
AnyKernel3
MIUI compatible
Wireguard support
Built with Clang version 11 and latest GCC
kcal: Advanced Color Control
K-LAPSE: A kernel-level livedisplay module
usb fast charge (upto 900mA)
TCP: Added bbr tcp and set it as default
added Boeffla wl_blocker
added adrenoboost (disabled by default, should enable and set it to low for smooth usage)
cpu-boost: rework scheduling
use power efficient workqueues
Added vDSO
Added fsync toggle
Overall thermal and performance improvements
Different builds for miui and custom from now on to allow miui to switch to lower refresh rates when idling
More Features will be added in the upcoming builds
Known Issues :
None, you tell ?
Download :
Github
Instructions :
Flash the zip in TWRP or FK Manager and reboot.
Credits to developers :
akhilnarang
arter97
Nathan Chancellor
XDA:DevDB Information
[PHOENIX][v1b1] HyperX Kernel, Kernel for the Xiaomi Poco X2
Contributors
TheDemon12, akhilnarang
Source Code:https://github.com/TheDemon12/HyperX-X2
Kernel Special Features:
Version Information
Status: Beta
Beta Release Date: 2020-04-05
Created 2020-04-05
Last Updated 2020-04-05
Click to expand...
Click to collapse
can you pls add ralink rt5370 usb driver support in here????
My personal kernel builds for Xiaomi Redmi Note 7.
New project because old one got deprecated due to me being on hiatus.
Nothing groundbreaking, but should work and be stable.
Some features before you go any further:
-Linux upstreamed to 4.4.219
-No kcal support yet (I'll add it later)
-Optimized with -O3 flag
-A lot of debugging is disabled
-Cortex A73 and Cortex A53 optimization flags
-Latest CAF tag merged into kernel sources
-Reworked DDR bus tables for better performance and responsiveness
-Simple LMK replaces stock Android LMK (credits to @Kerneltoast)
-Android Binder 4.19 backported (credits to @Kerneltoast)
-Pretty generous -100mV undervolt for CPU and GPU
-Latest anykernel3 used for flashing this kernel (credits to @osm0sis)
-LZ4 as a default zRAM compression algorithm
-Adrenoboost incorporated into this kernel (credits to @flar2)
-Initial HDR support for Tiamna panels (read below for additional info)
-Builds with oldcam and newcam will be available eventually
-Compiled using Clang 10.0.2 from Google for maximum stability
-Memory leak fixes
-HMP only
DISCLAIMER:
-Only AOSP/CAF based ROMs are supported.
-MIUI is not supported and don't ask for support.
-With any problem that might happen, logs or no support.
-HDR support is really rough around the edges and only Youtube can properly playback HDR videos upto 1080p30 smoothly.
DOWNLOAD HERE!
XDA:DevDB Information
JellyKernel, Kernel for the Xiaomi Redmi Note 7
Contributors
airidosas252, nathanchance, rama982
Source Code: https://github.com/airidosas252/xiaomi_android_kernel_lavender
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20200421
Created 2020-04-20
Last Updated 2020-04-20
Reserved
airidosas252 said:
My personal kernel builds for Xiaomi Redmi Note 7.
New project because old one got deprecated due to me being on hiatus.
Nothing groundbreaking, but should work and be stable.
Some features before you go any further:
-Linux upstreamed to 4.4.219
-No kcal support yet (I'll add it later)
-Optimized with -O3 flag
-A lot of debugging is disabled
-Cortex A73 and Cortex A53 optimization flags
-Latest CAF tag merged into kernel sources
-Reworked DDR bus tables for better performance and responsiveness
-Simple LMK replaces stock Android LMK (credits to @Kerneltoast)
-Android Binder 4.19 backported (credits to @Kerneltoast)
-Pretty generous -100mV undervolt for CPU and GPU
-Latest anykernel3 used for flashing this kernel (credits to @osm0sis)
-LZ4 as a default zRAM compression algorithm
-Adrenoboost incorporated into this kernel (credits to @flar2)
-Initial HDR support for Tiamna panels (read below for additional info)
-Builds with oldcam and newcam will be available eventually
-Compiled using Clang 10.0.2 from Google for maximum stability
-Memory leak fixes
-HMP only
DISCLAIMER:
-Only AOSP/CAF based ROMs are supported.
-MIUI is not supported and don't ask for support.
-With any problem that might happen, logs or no support.
-HDR support is really rough around the edges and only Youtube can properly playback HDR videos upto 1080p30 smoothly.
DOWNLOAD HERE!
XDA:DevDB Information
JellyKernel, Kernel for the Xiaomi Redmi Note 7
Contributors
airidosas252, nathanchance, rama982
Source Code:https://github.com/airidosas252/xiaomi_android_kernel_lavender
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 20200421
Created 2020-04-20
Last Updated 2020-04-20
Click to expand...
Click to collapse
Pls add criteria to flash this kernel, i try flashing this kernel but going to fastboot mode, im lazy to flash again n will not flash again...
Thx
not working,
it goes to fastboot