Database Develop

Hydrogen OS Camera for OnePlus 1 from OP2, fully functional

Hello everyone,
This time I bring you the awesome stability and classic performance of the Hydrogen Camera taken from the OnePlus 2 H2OS.
Tweaked and perfected to work on the OnePlus One.
Just install the apk as a normal file.
try it and report back pls
Regards
mods pls close thread

MODS/Admins are free to trash the thread if repost.
Hope people benefit from this app.
Regards

Does not work on my device with CM12.1.
Manually pushing it to system also does not work.
Installing the apk gives a parsing error.

fixed,
pls try again and post feedback
regards

It won't allow me to download the file no matter what. Different host maybe?
Sent from my A0001 using XDA Free mobile app

Hi, i've flashed it but i can´t see where it is. I can't see any icon.
thanks

its fine here.
i checked the download and it works.
regards

if still not possible, then let me know i will try to edit and upload a direct installation apk.
regards

uploaded the apk now.
dont know if it works or not.
works for me here when i flash it.
nonetheless, try and revert back on the findings pls.
regards

Just installed on Homemade Android 6.0 Marshmallow build by updateing.
The flash file you posted earlier didn't work, but the APK did.
Works fine, except that it will crush everytime i try to change mode or try to open the settings menu.
Great work

thanks for reporting.
now to edit it to work with everything on MM6.
however if u try it on LP 5.1.1 it surely works well.
since its taken from a 5.1.1 base, tweaks have to be done to make it work fully on the mm.
regards and thanks again

The apk works now on cm12.1.
The viewfinder for the frontfacing camera is way smoother compared to cameranext!
Settings work fine too. I did not test slowmotion video but the preview image looks stretched and wrong in this mode.

Apps stop working
Apps stop working when I want to check my picture in the apps.

To take a photo problems activating the flash on Euphoria OS rom

Hey Can you please port the MAXX AUDIO from the H2OS. Its like the best audio equaliser ever! Better than any sound mods and even V4A as per me

Works fine with the omni 6.0 build with oxygenOS libs.
crashes after closing, but that's not the end of the world.
slow mo video doesn't scale properly on preview, but output file looks ok.
don't think hdr is working, but that may be down to lack of supporting libs for it. HDR takes a better photo than picture+ mode.

it seems the max resolution at the moment is 12.5 MP 4:3. Hoping for 13MP. Thanks!

Working good on Oneplus 2 running CM12.1, smoother than the native CM camera!

Working fine in Cos 12.1, just FC when trying to view slow motion video.
Enviado do meu A0001 através de Tapatalk

App is great. On oppo find 7a FC when start to make panorama. Is it possible to make storage option for those who have sdcards?
The rom is CM12.1
Отправлено с моего Find7 через Tapatalk

Aug. -> Sept. Update (OTA) with Camera2API (HAL3) (&best gCam) safe!

Hey Folks,
after reading a lot i switched from my Galaxy S7 to the Mi A2 and im really happy with the camera - after unlocking Camera2API and switched to modded gCam I unlocked Camera2API over the temp. TWRP method and adb (in the TWRP terminal) on my August Version.
Now i was very unsure, if the official September OTA Update breaks my gCam Setup - but after the update :fingers-crossed: the modded gCam works perfect :highfive: so i dont need to redo the Camera2API unlocking :good:
@@@Best gCam Mod@@@
Thx to "celsoazevedo.com" for the nice Site: bsgfixPortrait-GoogleCamera-Pixel2Mod-Arnova8G2-V8.2.apk
All is working +SloMo +RAW :good:
Info: Use classic Smart Burst and Enable HDR+ Toggle
I hope, i could help anyone with the decision to make the OTA Update and which gCam is the best (so far) :good:

Great, i want to do that but i have the latest update ( september 1st and second update) and as far has i know the I unlocked Camera2API over the temp. TWRP method and adb (in the TWRP terminal) does not work for the ones that have the latest update.
Has it said in here:
https://forum.xda-developers.com/mi-a2/how-to/tutorial-camera2api-gcam-root-t3842475
I don´t want to root, just want camera2api enabled.

But maybe you can flash the complete Firmware from August (unlock bootloader with critical part.) and flash the complete older (August) firmware. Then unlock the camera2api and update the OTA (Septmber) This was my emergency plan, if the OTA would destroy the unlock.

dimitrij2k said:
Hey Folks,
after reading a lot i switched from my Galaxy S7 to the Mi A2 and im really happy with the camera - after unlocking Camera2API and switched to modded gCam I unlocked Camera2API over the temp. TWRP method and adb (in the TWRP terminal) on my August Version.
Now i was very unsure, if the official September OTA Update breaks my gCam Setup - but after the update :fingers-crossed: the modded gCam works perfect :highfive: so i dont need to redo the Camera2API unlocking :good:
@@@Best gCam Mod@@@
i tried three different Versions, but the best one is the MGC_5.2.022.apk
Just "Slow Motion" is not working, the rest is
I hope, i could help anyone with the decision to make the OTA Update and which gCam is the best (so far) :good:
Click to expand...
Click to collapse
Download link please.

dimitrij2k said:
But maybe you can flash the complete Firmware from August (unlock bootloader with critical part.) and flash the complete older (August) firmware. Then unlock the camera2api and update the OTA (Septmber) This was my emergency plan, if the OTA would destroy the unlock.
Click to expand...
Click to collapse
Tks, i tought that also, but for now i don´t want to mess too mutch with downgrade and command shell, just a clean unlock bootloader, enable camera2api and nothing more. I think the problem is TWRP, i will wait for an stabel/official version so i can go any further.

Can you record in 4K with google camera? For me it is not working no meter what gcam port I try.

Nope, but 4K is without stabilisation and only useable, when you own a ststiv or a gimbal. Free Hand recordings looks like **** in 4k. 1080p is with EIS and look way better, then sharp and shaky 4k

4k with EIS is just possible in "Snap Camera"

dimitrij2k said:
4k with EIS is just possible in "Snap Camera"
Click to expand...
Click to collapse
Opencamera should work too right?

Benjamin_L said:
Opencamera should work too right?
Click to expand...
Click to collapse
When camera2api is enabled, opencamera loses option for 4K. 1080p EIS works, but with zooming image.

OpenCamera dint work with Camera2Api enabled.

cstark27_GCam_5.1.018_24_v4.2t3_fu24-02.apk (fu24, 2018-10-01, normal/wide angle, changelog)
Im using this version for now. Front camera working. I think all functions works, except slow motion, but i don't care about...
Unfortunately front camera doesn't work with Arnova's apks. I hope this feature is fix soon for our device

marlontravagli said:
cstark27_GCam_5.1.018_24_v4.2t3_fu24-02.apk (fu24, 2018-10-01, normal/wide angle, changelog)
Im using this version for now. Front camera working. I think all functions works, except slow motion, but i don't care about...
Unfortunately front camera doesn't work with Arnova's apks. I hope this feature is fix soon for our device
Click to expand...
Click to collapse
This doesn't support 18:9 screen, is there any gcam for 18:9?

Deleted as I was being abused by Indian users.

Deleted as I was being abused by Indian users.
MOD EDIT: THREAD CLOSED PER THIS ^^^^

bhaiwala said:
Hi
I was trying to get aux cameras to work in GCAM for my Redmi Note 8 Global variant, but it was not successful, until I have rooted my phone.
For ROOTING REDMI NOTE 8 please follow this guide.
So, next thing is very simple.
1. Install SELinuxModeChanger+11.0.apk from attachments below.
2. Launch the App & Give it root permission.
3. Select the permissive button then close the app.
4. Install this GCAM, should be a clean install. Uninstall any gcam that you have already installed.
5. Launch the gcam, you will see the camera switch button is blue & You will see 03 buttons on top right of view finder, WIDE, MACRO & MAIN.
6. Enjoy
I have attached screenshots as well.
Click to expand...
Click to collapse
Is all cameras are working

thomaskuttymp said:
Is all cameras are working
Click to expand...
Click to collapse
Yes.
Main Camera
Macro
Wide Angle

Updated first post, with latest GCam build.

Thanks/

Camera magisk module?

I am on LineageOS 17.1 right now.
However LOS17.1 does not take pictures at full resolution.
However I've heard I can flash some Magisk modules to get a better cam with 48MP resolution.
Can someone link me the correct modules to flash so I have a better camera experience?

KuroRyu said:
I am on LineageOS 17.1 right now.
However LOS17.1 does not take pictures at full resolution.
However I've heard I can flash some Magisk modules to get a better cam with 48MP resolution.
Can someone link me the correct modules to flash so I have a better camera experience?
Click to expand...
Click to collapse
https://camera.aeonax.com/
As I mentioned in your other post, you want v158 and the 48MP fix for Q
The files are flashed in Magisk.
If you have an ad blocker you will need to temporarily disable it to view and download the files. The site checks for ad blockers and hides the download section if one is active.

Question Looking for latest gcam mod for f3gt?

Does anyone have latest gcam mod with config file which actually works. Because the current camera sucks. And stock camera is taking awfully enhanced images

I'm also finding

You may use this one. Don't ask for link u can google it.