I have installed xposed 87 on my gionee m3 and installed modules for customizing it..
But it is not working and my phone is hanging with it..
So what can i do now?? ??
So, if Xposed was activated and some of the modules you activated caused a boot loop, or no boot, you have 2 options.
1. Flash the undo Xposed zips to disable it
Or
2. Navigate to /data/app/ and find the package name corresponding to what you think caused the bootloop.
You can find the package names on the Xposed repo.
Sent from my Nexus 6P using Tapatalk
It Is Now A Part Of The Main Module Of MultiFunctions & Its Thread https://forum.xda-developers.com/apps/magisk/module-multifunctions-bootloop-t3933386.
Click to expand...
Click to collapse
Introduction:
Simple Module To Open Magisk In Core Only Mode.
- In-Case Of Facing A Bootloop Issue Due To Flashing A Module, Flash This Module
- This Module Disables All Magisk Modules By Enabling Magisk Core Only Mode & After Booting, You Can Disable Magisk Core Only Mode From The Section Of Settings In Magisk Manager Then Removing/Disabling The Module(s) Which Caused The Bootloop/Issue From The Section Of Modules In Magisk Manager Then Reboot (Rebooting The Android Is Required To Load The Rest Of Modules)
- Core Only Mode Gives The Device The Ability To Get Into The Android Directly With User Interface Which Means The User Can Use The Device With All Features/Functionalities Except Magisk Modules Even Before Removing The Module(s) Which Caused The Bootloop/Issue
- Enabling Core Only Mode Keeps MagiskSU, MagiskHide & Systemless Hosts Activated, But No Modules Are Loaded/Enabled
- After The Installation & Booting, It Opens Magisk In Core Only Mode & Disables Itself
- Enabling This Module = Doing Its Functionality & Disabling Itself (Next Reboot)
Current Version: 1.0.3.3
- For Using The Module Thru ADB Shell/TWRP Terminal [The Module Must Be Pre-Installed Via Magisk Manager/TWRP Recovery/ADB Sideload], Write The Following Commands --> rm -f /data/DreamerMods/MultiFunctions/MagiskCoreOnlyMode/Active/disable (Click On Enter) --> reboot (Click On Enter)
Created: July.17.2018
Updated: May.09.2019
Download Link: Click Here
- For The Module Which Is Ended Its Name With v1300, It Supports Magisk v13.1(1310) To v13.6(1360)
- For The Module Which Is Ended Its Name With v1400, It Supports Magisk v14.0(1400) To v15.3(1531)
- For The Module Which Is Ended Its Name With v1500, It Supports Magisk v15.0(1500) To v17.3(17300)
- For The Module Which Is Ended Its Name With v17000, It Supports Magisk v17.0(17000) To v17.3(17300)
- For The Module Which Is Ended Its Name With v18000, It Supports Magisk v18.0(18000) To v18.1(18100)
- For The Module Which Is Ended Its Name With v19000, It Supports Magisk v19.0(19000) To The Latest Version
- For The Module Which Is Ended Its Name With Unity, It Supports Any-Rooting-Tool Such As SuperSU, Lineage-AddOnSU & Magisk
Installation:
- Flash It Thru TWRP Recovery
- Or Magisk Manager --> Modules --> Add (+) --> Choose The Downloaded File --> Reboot
- Or Flash It Thru ADB Sideload --> adb sideload Module.zip --> Reboot
General Info:
- To Disable The Module For Magisk Users, Open Magisk Manager --> Modules --> The Module --> Tap On The Check Box/The True Icon --> Reboot
- To Enable The Module For Magisk Users, Open Magisk Manager --> Modules --> The Module --> Tap On The Uncheck Box --> Reboot
- To Uninstall The Module For Magisk Users, Open Magisk Manager --> Modules --> The Module --> Tap On The Bin Icon --> Reboot
- To Disable The Module For All Users [Non-Magisk Users & Magisk Users], Use Any Root File Explorer Such MiXplorer --> Root --> data --> DreamerMods --> MultiFunctions --> The Module --> Copy The File Of Disable To The Folder Of Active (Or Delete The File Of Disable From The Folder Of Inactive) --> Reboot
- To Enable The Module For All Users [Non-Magisk Users & Magisk Users], Use Any Root File Explorer Such MiXplorer --> Root --> data --> DreamerMods --> MultiFunctions --> The Module --> Delete The File Of Disable From The Folder Of Active (Or Copy The File Of Disable To The Folder Of Inactive) --> Reboot
- To Uninstall The Module For All Users [Non-Magisk Users & Magisk Users] (Unity), Reflash The Module
- In-Case Of Facing A Bootloop/Bootscreen/Blackscreen Issue Due To Installing/Configuring An App, Download SafeMode4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/module-safe-mode-bootloop-bootscreen-t3847422 Then Flash It
- In-Case Of Facing A Bootloop/Bootscreen/Blackscreen Issue Due To Adding App/Activity/Process To Magisk Hide, Download ClearHideList4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/module-hide-list-bootloop-bootscreen-t3849208 Then Flash It
Click On Thanks Button If The Module/Post Is Useful (Dreamer(3MF))
>>> Sharing A Good Thought Is Gold <<<
----------------------------------------------------------------------------------------------------------------
SELinux Mode Inverter - Clear Dalvik Cache - Other Modules
----------------------------------------------------------------------------------------------------------------
Reserved for News/Updates #1
Reserved for News/Updates #2
I Am Asking Our Mates To Check The Stable Version And Share The Feedbacks/Ideas/Questions To Enhance/Modify The Module.
Thank you brother :highfive:
image18 said:
Thank you brother :highfive:
Click to expand...
Click to collapse
Did you try?
Sent from my MIX 2 using Tapatalk
amour9999 said:
Did you try?
Sent from my MIX 2 using Tapatalk
Click to expand...
Click to collapse
yes
I wonder...
How can we get into magisk manager to use this module when having bootloop problem?
bnwg said:
I wonder...
How can we get into magisk manager to use this module when having bootloop problem?
Click to expand...
Click to collapse
In-Case Of Facing A Bootloop Issue Due To Flashing A Module, You Need To Put A Copy Of CoreOnlyMode4Magisk On SD-Card/Internal Memory Then Flash This Module Thru TWRP Recovery. This Module Disables All Magisk Modules By Enabling Magisk Core Only Mode & After Booting, You Can Disable Magisk Core Only Mode From The Section Of Settings In Magisk Manager Then Removing The Module Which Caused The Bootloop From The Section Of Modules In Magisk Manager.
Hello,
Thanks for that.
It's a little similar to the first feature of mm module (https://github.com/Magisk-Modules-Repo/Magisk-Manager-for-Recovery-Mode), but yours one directly enable the "Core Only Mode" of Magisk, the differences are that all modules are disabled as u said on your OP and it disable the "Magisk Hide" and "Host systemless support" features, that's it, right ?
Effectivly it could be usefull in case the mm module don't works for any reason or if one or several hiders/hosts module(s) cause bootloops on a device.
Rom said:
Hello,
Thanks for that.
It's a little similar to the first feature of mm module (https://github.com/Magisk-Modules-Repo/Magisk-Manager-for-Recovery-Mode), but yours one directly enable the "Core Only Mode" of Magisk, the differences are that all modules are disabled as u said on your OP and it disable the "Magisk Hide" and "Host systemless support" features, that's it, right ?
Effectivly it could be usefull in case the mm module don't works for any reason or if one or several hiders/hosts module(s) cause bootloops on a device.
Click to expand...
Click to collapse
Thanks For Your Interest. As For Magisk Manager For Recovery Mode & Core Only Mode, Both Of Them Are Sharing The Same Target But Not The Same Concept. Core Only Mode Gives The Device The Ability To Get Into The Android Directly With User Interface Which Means That The User Can Use The Device With All Features/Functionalities Except Magisk Modules Even Before Disabling/Removing The Module(s) Which Caused The Bootloop/Issue.
Enabling Core Only Mode Keeps MagiskSU, MagiskHide & Systemless Hosts Activated, But No Modules Are Loaded/Enabled.
This module is usefully! THANKS BRO!
Fdraco10 said:
This module is usefully! THANKS BRO!
Click to expand...
Click to collapse
Thanks! You Can Also Check Another Useful Modules From This Link >>>Other Modules<<<.
thanks man! your module is my device savior
This module is useful
Deleted
peterlee928 said:
much thanks for sharing this lovely tool. this will save me much time going forward.
Dreamer(3MF) said:
In-Case Of Facing A Bootloop/Bootscreen Issue Due To Flashing A Module, Download CoreOnlyMode4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/module-core-mode-bootloop-solver-modules-t3817366 Then Flash It Thru TWRP Recovery.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@peterlee928 Nice To Hear It Worked. And You Can Try Also The Following Useful Modules
- ClearDalvikCache4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/module-dalvik-cache-t3787264
- ClearPlayStoreWithServicesData4Magisk From This Thread https://forum.xda-developers.com/apps/magisk/module-google-playstore-services-data-t3789498
Very nice module, it is great to save you from bootloop, same as entering in Safe Mode on PC!!
But how disable Core Only Mode after removing the problematic module???
I delete guilty module and rebooted, but still Magisk in Core mode only!
I removed the module Core Only Mode, and rebooted and still Magisk in Core Only Mode
How to get back to default working Magisk State??
Thx.
saoudien07 said:
Very nice module, it is great to save you from bootloop, same as entering in Safe Mode on PC!!
But how disable Core Only Mode after removing the problematic module???
I delete guilty module and rebooted, but still Magisk in Core mode only!
I removed the module Core Only Mode, and rebooted and still Magisk in Core Only Mode
How to get back to default working Magisk State??
Thx.
Click to expand...
Click to collapse
Check The Following Post.
Dreamer(3MF) said:
Introduction:
Simple Module To Open Magisk In Core Only Mode To Help For Removing Any Module Which Causes A Bootloop.
- In-Case Of Facing A Bootloop Issue Due To Flashing A Module, You Need To Put A Copy Of CoreOnlyMode4Magisk On SD-Card/Internal Memory Then Flash This Module Thru TWRP Recovery
- This Module Disables All Magisk Modules By Enabling Magisk Core Only Mode & After Booting, You Can Disable Magisk Core Only Mode From The Section Of Settings In Magisk Manager Then Removing/Disabling The Module(s) Which Caused The Bootloop/Issue From The Section Of Modules In Magisk Manager Then Reboot (Rebooting The Android Is Required To Load The Rest Of Modules)
Click to expand...
Click to collapse
Dreamer(3MF) said:
Check The Following Post.
Click to expand...
Click to collapse
Thx for the fast answer
so was in Magisk "SETTING"
Nothing to do with uninstalling of the module.
Btw u got great modules, they are must have and should go to toolbox of every Rom tweaker
Hey guys, am using magisk 20.4 - trying to install riru core for exposed, however, once installed is complete the module is not visible, even after rebooting.
Any ideas on how to fix
Thanks,
I have sleep mode set to 1 minute but screen never turns off by itself anymore.
I have 1910.64 with magisk with modules: Riru - core, EdXposed, systemless hosts, EdXposed manager, GravityBox Pie, HiddenCore, lucky*patcher and XPrivacyLua.
k00lguy105 said:
I have sleep mode set to 1 minute but screen never turns off by itself anymore.
I have 1910.64 with magisk with modules: Riru - core, EdXposed, systemless hosts, EdXposed manager, GravityBox Pie, HiddenCore, lucky*patcher and XPrivacyLua.
Click to expand...
Click to collapse
Hi friend. Im facing same issue. Not allways. But sometimes when i recieve a whatsapp screen doesnt turns off
I think that its last update problem[emoji20]
Enviado desde mi ASUS_I001DC mediante Tapatalk
Hi all (Sorry for my English)
I bought an MI 9 to be able to fiddle a little but the problem I installed previously EdXposed Magisk.
Except that I was able to realize that my SafetyNet certificate was jumping every time...
I try different method:
1- Activate MagiskHide
2- On Edxposed activate the "Safetynet Pass" option
3- install the Magisk Hide Props module (Magisk)
4- Install HiddenCore on EdXposed
5- Edit my fingerprint via the "Props" command
6- Activate "Force Basic Key Attestation" (Props)
7- Try a SafetyNet Fix via TWRP
So I try to uninstall EdXposed if sometimes there were problems with the latter.
Still, if you have an idea, I'm a taker!
Envoyé de mon MI 3W en utilisant Tapatalk